A Stable Graphitic,Nanocarbon‐Encapsulated,Cobalt‐Rich Core–Shell Electrocatalyst as an Oxygen Electrode in a Water Electrolyzer

The oxygen electrode plays a vital role in the successful commercialization of renewable energy technologies, such as fuel cells and water electrolyzers. In this study, the Prussian blue analogue‐derived nitrogen‐doped nanocarbon (NC) layer‐trapped, cobalt‐rich, core–shell nanostructured electrocatalysts (core–shell Co@NC) are reported. The electrode exhibits an improved oxygen evolution activity and stability compared to that of the commercial noble electrodes. The core–shell Co@NC‐loaded nickel foam exhibits a lower overpotential of 330 mV than that of IrO₂ on nickel foam at 10 mA cm^?2 and has a durability of over 400 h. The commercial Pt/C cathode‐assisted, core–shell Co@NC–anode water electrolyzer delivers 10 mA cm^?2 at a cell voltage of 1.59 V, which is 70 mV lower than that of the IrO₂–anode water electrolyzer. Over the long‐term chronopotentiometry durability testing, the IrO₂–anode water electrolyzer shows a cell voltage loss of 230 mV (14%) at 95 h, but the loss of the core–shell Co@NC–anode electrolyzer is only 60 mV (4%) even after 350 h cell‐operation. The findings indicate that the Prussian blue analogue is a class of inorganic nanoporous materials that can be used to derive metal‐rich, core–shell electrocatalysts with enriched active centers.     

3D Hierarchical Core–Shell Nanostructured Arrays on Carbon Fibers as Catalysts for Direct Urea Fuel Cells

Bifunctional cobalt oxide (Co₃O₄) nanowire catalysts grown on carbon cloth (CC) fibers and their modification with nickel oxide (NiO) and manganese dioxide (MnO₂) to produce core–shell nanoarchitectures are explored as catalysts for urea oxidation reaction and oxygen reduction reaction in direct urea fuel cells (DUFC). Based on a systematic electrochemical characterization of the catalyst, the as‐developed core–shell nanoarchitectures are optimized toward DUFC performance. Under alkaline conditions with an anion exchange membrane, the DUFC with a cell configuration of Co₃O₄@NiO(1:2)/CC(a|c)Co₃O₄@MnO₂(1:2)/CC exhibits a maximum power density of 33.8 mW cm^?2 with excellent durability for 120 h without any performance loss. Furthermore, the DUFC exhibits a maximum power density of 23.2 mW cm^?2 with human urine as a fuel. These findings offer an approach to convert human waste into treasure.     

MOF Template‐Directed Fabrication of Hierarchically Structured Electrocatalysts for Efficient Oxygen Evolution Reaction

The ever‐increasing demand for clean and renewable power sources has sparked intensive research on water splitting to produce hydrogen, in which the exploration of electrocatalysts is the central issue. Herein, a new strategy, metal–organic framework template‐directed fabrication of hierarchically structured Co₃O₄@X (X = Co₃O₄, CoS, C, and CoP) electrocatalysts for efficient oxygen evolution reaction (OER) is developed, where Co₃O₄@X are derived from cobalt carbonatehydroxide@zeolitic‐imidazolate‐framework‐67 (CCH@ZIF‐67). Unique hierarchical structure and synergistic effect of resulting catalysts endow abundant exposed active sites, facile ion diffusion path, and improved conductivity, being favorable for improving catalytic activity of them. Consequently, these derivatives Co₃O₄@X reveal highly efficient electrocatalytic performance with long‐term durability for the OER, much superior to previously reported cobalt‐based catalysts as well as the Ir/C catalyst. Particularly, Co₃O₄@CoP exhibits the highest electrocatalytic capability with the lower overpotential of 238 mV at the current density of 10 mA cm^?2. Furthermore, Co₃O₄@X can also efficiently catalyze other small molecules through electro‐oxidation reaction (e.g., glycerol, methanol, or ethanol). It is expected that the strategy presented here can be extended to the fabrication of other composite electrode materials with hierarchical structures for more efficient water splitting.     

From Water Oxidation to Reduction: Homologous Ni–Co Based Nanowires as Complementary Water Splitting Electrocatalysts

A homologous Ni–Co based nanowire system, consisting of both nickel cobalt oxide and nickel cobalt sulfide nanowires, is developed for efficient, complementary water splitting. The spinel‐type nickel cobalt oxide (NiCo₂O₄) nanowires are hydrothermally synthesized and can serve as an excellent oxygen evolution reaction catalyst. Subsequent sulfurization of the NiCo₂O₄ nanowires leads to the formation of pyrite‐type nickel cobalt sulfide (Ni_0.33Co_0.67S₂) nanowires. Due to the 1D nanowire morphology and enhanced charge transport capability, the Ni_0.33Co_0.67S₂ nanowires function as an efficient, stable, and robust nonnoble metal electrocatalyst for hydrogen evolution reaction (HER), substantially exceeding CoS₂ or NiS₂ nanostructures synthesized under similar methods. The Ni_0.33Co_0.67S₂ nanowires exhibit low onset potential of ?65, ?39, and ?50 mV versus reversible hydrogen electrode, Tafel slopes of 44, 68, and 118 mV dec^?1 at acidic, neutral, and basic conditions, respectively, and excellent stability, comparable to the best reported non‐noble metal‐based HER catalysts. Furthermore, the homologous Ni_0.33Co_0.67S₂ nanowires and NiCo₂O₄ nanowires are assembled into an all‐nanowire based water splitting electrolyzer with a current density of 5 mA cm^?2 at a voltage as 1.65 V, thus suggesting a unique homologous, earth abundant material system for water splitting.     

General Dimension‐Controlled Synthesis of Hollow Carbon Embedded with Metal Singe Atoms or Core–Shell Nanoparticles for Energy Storage Applications

Metal–organic framework (MOF) derived carbonaceous nanocomposites have recently received enormous interest due to their intriguing physiochemical properties and diverse energy applications. However, there is a lack of general synthetic approaches that can achieve flexible dimension control while manipulating metal dispersion of MOF derived carbon composites. Herein, the authors present an attractive route for the growth of zeolitic imidazolate frameworks (ZIFs) with different dimensions and types of metal nodes that can be further transformed into either core–shell nanoparticles or metal single atoms. The formation of a ZIF‐8 seed layer on ZnO template is identified as the key step, enabling uniform growth of various ZIF materials (e.g., Zn/Co‐ZIF, Zn/Fe‐ZIF, and ZIF‐7) with different dimensions (1D, 2D, and 3D). Simultaneously, this approach avoids free growth of 0D MOF particles and diminishing of the ZnO template. To demonstrate the importance of dimensional control over the growth of ZIF materials for energy application, the 1D and 2D ZnO@ZIF precursors are converted into carbon nanotube and carbon nanoplate, which are decorated with Co/CoS₂ nanoparticles and Fe single atoms, respectively. Two high dimensional carbon nanocomposites deliver significantly enhanced performances compared to their 0D counterparts when employed as the Li‐ion battery anode and bifunctional oxygen electrocatalyst.     

Cu,Co‐Embedded N‐Enriched Mesoporous Carbon for Efficient Oxygen Reduction and Hydrogen Evolution Reactions

Rational synthesis of hybrid, earth‐abundant materials with efficient electrocatalytic functionalities are critical for sustainable energy applications. Copper is theoretically proposed to exhibit high reduction capability close to Pt, but its high diffusion behavior at elevated fabrication temperatures limits its homogeneous incorporation with carbon. Here, a Cu, Co‐embedded nitrogen‐enriched mesoporous carbon framework (CuCo@NC) is developed using, a facile Cu‐confined thermal conversion strategy of zeolitic imidazolate frameworks (ZIF‐67) pre‐grown on Cu(OH)₂ nanowires. Cu ions formed below 450 °C are homogeneously confined within the pores of ZIF‐67 to avoid self‐aggregation, while the existence of Cu? N bonds further increases the nitrogen content in carbon frameworks derived from ZIF‐67 at higher pyrolysis temperatures. This CuCo@NC electrocatalyst provides abundant active sites, high nitrogen doping, strong synergetic coupling, and improved mass transfer, thus significantly boosting electrocatalytic performances in oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER). A high half‐wave potential (0.884 V vs reversible hydrogen potential, RHE) and a large diffusion‐limited current density are achieved for ORR, comparable to or exceeding the best reported earth‐abundant ORR electrocatalysts. In addition, a low overpotential (145 mV vs RHE) at 10 mA cm^?2 is demonstrated for HER, further suggesting its great potential as an efficient electrocatalyst for sustainable energy applications.     

Unraveling Geometrical Site Confinement in Highly Efficient Iron‐Doped Electrocatalysts toward Oxygen Evolution Reaction

Introduction of iron in various catalytic systems has served a crucial function to significantly enhance the catalytic activity toward oxygen evolution reaction (OER), but the relationship between material properties and catalysis is still elusive. In this study, by regulating the distinctive geometric sites in spinel, Fe occupies the octahedral sites (Fe³⁺_(Oh)) and confines Co to the tetrahedral site (Co²⁺_(Td)), resulting in a strikingly high activity (η_{j = 10 mA cm}^?2 = 229 mV and η_{j = 100 mA cm}^?2 = 281 mV). Further enrichment of Fe ions would occupy the tetrahedral sites to decline the amount of Co²⁺_(Td) and deteriorate the OER activity. It is also found that similar tafel slope and peak frequency in Bode plot of electrochemical impedance spectroscopy indicate that Co²⁺_(Td) ions are primarily in charge of water oxidation catalytic center. By means of electrochemical techniques and in situ X‐ray absorption spectroscopy, it is proposed that Fe³⁺_(Oh) ions mainly confine cobalt ions to the tetrahedral site to restrain the multipath transfer of cobalt ions during the dynamic structural transformation between spinel and oxyhydroxide, continuously activating the catalytic behavior of Co²⁺_(Td) ions. This material‐related insight provides an indication for the design of highly efficient OER electrocatalysts.     

Highly Stable Supercapacitors with Conducting Polymer Core‐Shell Electrodes for Energy Storage Applications

Conducting polymers such as polyaniline (PAni) show a great potential as pseudocapacitor materials for electrochemical energy storage applications. Yet, the cycling instability of PAni resulting from structural alteration is a major hurdle to its commercial application. Here, the development of nanostructured PAni–RuO₂ core–shell arrays as electrodes for highly stable pseudocapacitors with excellent energy storage performance is reported. A thin layer of RuO₂ grown by atomic layer deposition (ALD) on PAni nanofibers plays a crucial role in stabilizing the PAni pseudocapacitors and improving their energy density. The pseudocapacitors, which are based on optimized PAni–RuO₂ core–shell nanostructured electrodes, exhibit very high specific capacitance (710 F g^?1 at 5 mV s^?1) and power density (42.2 kW kg^?1) at an energy density of 10 Wh kg^?1. Furthermore, they exhibit remarkable capacitance retention of ≈88% after 10 000 cycles at very high current density of 20 A g^?1, superior to that of pristine PAni‐based pseudocapacitors. This prominently enhanced electrochemical stability successfully demonstrates the buffering effect of ALD coating on PAni, which provides a new approach for the preparation of metal‐oxide/conducting polymer hybrid electrodes with excellent electrochemical performance.     

Reduced Mesoporous Co3O4 Nanowires as Efficient Water Oxidation Electrocatalysts and Supercapacitor Electrodes

While electrochemical water splitting is one of the most promising methods to store light/electrical energy in chemical bonds, a key challenge remains in the realization of an efficient oxygen evolution reaction catalyst with large surface area, good electrical conductivity, high catalytic properties, and low fabrication cost. Here, a facile solution reduction method is demonstrated for mesoporous Co₃O₄ nanowires treated with NaBH₄. The high‐surface‐area mesopore feature leads to efficient surface reduction in solution at room temperature, which allows for retention of the nanowire morphology and 1D charge transport behavior, while at the same time substantially increasing the oxygen vacancies on the nanowire surface. Compared to pristine Co₃O₄ nanowires, the reduced Co₃O₄ nanowires exhibit a much larger current of 13.1 mA cm^‐2 at 1.65 V vs reversible hydrogen electrode (RHE) and a much lower onset potential of 1.52 V vs RHE. Electrochemical supercapacitors based on the reduced Co₃O₄ nanowires also show a much improved capacitance of 978 F g^‐1 and reduced charge transfer resistance. Density‐functional theory calculations reveal that the existence of oxygen vacancies leads to the formation of new gap states in which the electrons previously associated with the Co‐O bonds tend to be delocalized, resulting in the much higher electrical conductivity and electrocatalytic activity.     

Ni3+‐Induced Formation of Active NiOOH on the Spinel Ni–Co Oxide Surface for Efficient Oxygen Evolution Reaction

Efficient and earth abundant electrocatalysts for high‐performance oxygen evolution reaction (OER) are essential for the development of sustainable energy conversion technologies. Here, a new hierarchical Ni–Co oxide nanostructure, composed of small secondary nanosheets grown on primary nanosheet arrays, is synthesized via a topotactic transformation of Ni–Co layered double hydroxide. The Ni³⁺‐rich surface benefits the formation of NiOOH, which is the main redox site as revealed via in situ X‐ray absorption near edge structure and extended X‐ray absorption fine structure spectroscopy. The Ni–Co oxide hierarchical nanosheets (NCO–HNSs) deliver a stable current density of 10 mA cm^?2 at an overpotential of ≈0.34 V for OER with a Tafel slope of as low as 51 mV dec^?1 in alkaline media. The improvement in the OER activity can be ascribed to the synergy of large surface area offered by the 3D hierarchical nanostructure and the facile formation of NiOOH as the main active sites on the surface of NCO–HNSs to decrease the overpotential and facilitate the catalytic reaction.     

NiFe‐Based Metal–Organic Framework Nanosheets Directly Supported on Nickel Foam Acting as Robust Electrodes for Electrochemical Oxygen Evolution Reaction

It is of great significance to develop highly efficient and superior stable oxygen evolution reaction (OER) electrocatalysts for upcoming electrochemical conversion technologies and clean energy systems. Here, an assembled 3D electrode is synthesized by a one‐step solvothermal process using such an original OER electrocatalyst. During the solvothermal process, Ni ions released from Ni foam in acidic solution and Fe ions added exogenously act as metal centers and coordinate with terephthalic acid (TPA) organic molecules by robust coordinate bonds, and finally, NiFe‐based metal–organic framework (MOF) nanosheets in situ grown on Ni foam, i.e., MIL‐53(FeNi)/NF, are prepared. This binder‐free 3D electrode shows superior OER activity with high current density (50 mA cm^?2) at an overpotential of 233 mV, a Tafel slope of 31.3 mV dec^?1, and excellent stability in alkaline aqueous solution (1 m KOH). It is discovered that introduction of Fe into MIL‐53 structure increases electrochemically‐active areas as well as reaction sites, accelerated electron transport capability, and modulated electronic structure to enhance catalytic performance. Besides, first principles calculations show that MIL‐53(FeNi) is more favorable for foreign atoms' adsorption and has increased 3d orbital electron density boosting intrinsic activity. This work elucidates a promising electrode for electrocatalysts and enriches direct application of MOF materials.     

Graphitic Nanoshell/Mesoporous Carbon Nanohybrids as Highly Efficient and Stable Bifunctional Oxygen Electrocatalysts for Rechargeable Aqueous Na–Air Batteries

Efficient and cost‐effective bifunctional electrocatalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are of vital importance in energy conversion and storage devices. Despite the recent progress in bifunctional oxygen electrocatalysts, their unbalanced and insufficient OER and ORR activities has continued to pose challenges for the practical application of such energy devices. The design of highly integrated, high‐performance, bifunctional oxygen electrocatalysts composed of highly graphitic nanoshells embedded in mesoporous carbon (GNS/MC) is reported. The GNS/MC exhibits very high oxygen electrode activity, which is one of the best performances among nonprecious metal bifunctional oxygen electrocatalysts, and substantially outperforms Ir‐ and Pt‐based catalysts. Moreover, the GNS/MC shows excellent durability for both OER and ORR. In situ X‐ray absorption spectroscopy and square wave voltammetry reveal the roles of residual Ni and Fe entities in enhancing OER and ORR activities. Raman spectra indicate highly graphitic, defect‐rich nature of the GNS/MC, which can contribute to the enhanced OER activity and to high stability for the OER and ORR. In aqueous Na–air battery tests, the GNS/MC air cathode‐based cell exhibits superior performance to Ir/C‐ and Pt/C‐based batteries. Significantly, the GNS/MC‐based cell demonstrates the first example of rechargeable aqueous Na–air battery.     

Nickel–Copper Alloy Encapsulated in Graphitic Carbon Shells as Electrocatalysts for Hydrogen Evolution Reaction

Searching for cost‐effective and high‐performance electrocatalysts for hydrogen production is of paramount importance. Herein, nickel‐copper (NiCu) alloy nanoparticles are encapsulated into graphitic shells via an ambient‐pressure chemical vapor deposition process. The resulting carbon‐encapsulated NiCu (denoted as NiCu@C) composite possesses a well‐defined core–shell structure with tunable thicknesses of the shells and is examined as electrocatalysts for the hydrogen evolution reaction (HER) in acidic, neutral, and alkaline solutions. Electrochemical measurements indicate that the activity of the NiCu@C highly depends on the thickness of the shell. Single‐layered graphene encapsulated NiCu nanoparticles show remarkable HER activity and durability. To obtain a current density of 10 mA cm^?2, overpotentials of 48, 164, and 74 mV are needed in electrolyte solutions with pH = 0, 7, and 14, respectively. Such low overpotentials render the composite as one of the most active nonprecious electrocatalysts. Accelerated durability tests demonstrate that the NiCu@C catalysts exhibit excellent stability. Density function theory calculations are conducted to investigate the electronic structures of the NiCu@C. It is found that the representative Ni₄₃Cu₁₂@C₂₄₀ model shows an ideal adsorption energy of hydrogen (?0.03 eV), manifesting its high HER activity.     

Co–Ni‐Based Nanotubes/Nanosheets as Efficient Water Splitting Electrocatalysts

One promising approach to hydrogen energy utilization from full water splitting relies on the successful development of earth‐abundant, efficient, and stable electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Here, homologous Co–Ni‐based nanotube/nanosheet structures with tunable Co/Ni ratios, including hydroxides and nitrides, are grown on conductive substrates by a cation‐exchanging method to grow hydroxides, followed by anion exchanging to obtain corresponding nitrides. These hydroxide OER catalysts and nitride HER catalysts exhibit low overpotentials, small Tafel slopes, and high current densities, which are attributed to their large electrochemically reactive surface, 1D morphologies for charge conduction, and octahedral coordination states of metal ions for efficient catalytic activities. The homologous Co–Ni‐based nanotube hydroxides and nitrides suggest promising electrocatalysts for full water splitting with high efficiency, good stability, convenient fabrication, and low cost.     

Metal–Organic Framework Templated Pd@PdO–Co3O4 Nanocubes as an Efficient Bifunctional Oxygen Electrocatalyst

The development of high‐efficiency bifunctional electrocatalyst for oxygen reduction and evolution reactions (ORR/OER) is critical for rechargeable metal–air batteries, a typical electrochemical energy storage and conversion technology. This work reports a general approach for the synthesis of Pd@PdO–Co₃O₄ nanocubes using the zeolite‐type metal–organic framework (MOF) as a template. The as‐synthesized materials exhibit a high electrocatalytic activity toward OER and ORR, which is comparable to those of commercial RuO₂ and Pt/C electrocatalysts, while its cycle performance and stability are much higher than those of commercial RuO₂ and Pt/C electrocatalysts. Various physicochemical characterizations and density functional theory calculations indicate that the favorable electrochemical performance of the Pd@PdO–Co₃O₄ nanocubes is mainly attributed to the synergistic effect between PdO and the robust hollow structure composed of interconnected crystalline Co₃O₄ nanocubes. This work establishes an efficient approach for the controlled design and synthesis of MOF‐templated hybrid nanomaterials, and provides a great potential for developing high‐performance electrocatalysts in energy storage and conversion.     

Controlling the Active Sites of Sulfur‐Doped Carbon Nanotube–Graphene Nanolobes for Highly Efficient Oxygen Evolution and Reduction Catalysis

Controlling active sites of metal‐free catalysts is an important strategy to enhance activity of the oxygen evolution reaction (OER). Many attempts have been made to develop metal‐free catalysts, but the lack of understanding of active‐sites at the atomic‐level has slowed the design of highly active and stable metal‐free catalysts. A sequential two‐step strategy to dope sulfur into carbon nanotube–graphene nanolobes is developed. This bidoping strategy introduces stable sulfur–carbon active‐sites. Fluorescence emission of the sulfur K‐edge by X‐ray absorption near edge spectroscopy (XANES) and scanning transmission electron microscopy electron energy loss spectroscopy (STEM‐EELS) mapping and spectra confirm that increasing the incorporation of heterocyclic sulfur into the carbon ring of CNTs not only enhances OER activity with an overpotential of 350 mV at a current density of 10 mA cm^?2, but also retains 100% of stability after 75 h. The bidoped sulfur carbon nanotube–graphene nanolobes behave like the state‐of‐the‐art catalysts for OER but outperform those systems in terms of turnover frequency (TOF) which is two orders of magnitude greater than (20% Ir/C) at 400 mV overpotential with very high mass activity 1000 mA cm^?2 at 570 mV. Moreover, the sulfur bidoping strategy shows high catalytic activity for the oxygen reduction reaction (ORR). Stable bifunctional (ORR and OER) catalysts are low cost, and light‐weight bidoped sulfur carbon nanotubes are potential candidates for next‐generation metal‐free regenerative fuel cells.