3D‐Printed Stretchable Micro‐Supercapacitor with Remarkable Areal Performance

While stretchable micro‐supercapacitors (MSCs) have been realized, they have suffered from limited areal electrochemical performance, thus greatly restricting their practical electronic application. Herein, a facile strategy of 3D printing and unidirectional freezing of a pseudoplastic nanocomposite gel composed of Ti₃C₂T_x MXene nanosheets, manganese dioxide nanowire, silver nanowires, and fullerene to construct intrinsically stretchable MSCs with thick and honeycomb‐like porous interdigitated electrodes is introduced. The unique architecture utilizes thick electrodes and a 3D porous conductive scaffold in conjunction with interacting material properties to achieve higher loading of active materials, larger interfacial area, and faster ion transport for significantly improved areal energy and power density. Moreover, the oriented cellular scaffold with fullerene‐induced slippage cell wall structure prompts the printed electrode to withstand large deformations without breaking or exhibiting obvious performance degradation. When imbued with a polymer gel electrolyte, the 3D‐printed MSC achieves an unprecedented areal capacitance of 216.2 mF cm^?2 at a scan rate of 10 mV s^?1, and remains stable when stretched up to 50% and after 1000 stretch/release cycles. This intrinsically stretchable MSC also exhibits high rate capability and outstanding areal energy density of 19.2 µWh cm^?2 and power density of 58.3 mW cm^?2, outperforming all reported stretchable MSCs.     

High‐Performance Fiber‐Shaped All‐Solid‐State Asymmetric Supercapacitors Based on Ultrathin MnO2 Nanosheet/Carbon Fiber Cathodes for Wearable Electronics

Flexible fiber‐shaped supercapacitors have shown great potential in portable and wearable electronics. However, small specific capacitance and low operating voltage limit the practical application of fiber‐shaped supercapacitors in high energy density devices. Herein, direct growth of ultrathin MnO₂ nanosheet arrays on conductive carbon fibers with robust adhesion is exhibited, which exhibit a high specific capacitance of 634.5 F g^?1 at a current density of 2.5 A g^?1 and possess superior cycle stability. When MnO₂ nanosheet arrays on carbon fibers and graphene on carbon fibers are used as a positive electrode and a negative electrode, respectively, in an all‐solid‐state asymmetric supercapacitor (ASC), the ASC displays a high specific capacitance of 87.1 F g^?1 and an exceptional energy density of 27.2 Wh kg^?1. In addition, its capacitance retention reaches 95.2% over 3000 cycles, representing the excellent cyclic ability. The flexibility and mechanical stability of these ASCs are highlighted by the negligible degradation of their electrochemical performance even under severely bending states. Impressively, as‐prepared fiber‐shaped ASCs could successfully power a photodetector based on CdS nanowires without applying any external bias voltage. The excellent performance of all‐solid‐state ASCs opens up new opportunity for development of wearable and self‐powered nanodevices in near future.     

All‐Printed MnHCF‐MnOx‐Based High‐Performance Flexible Supercapacitors

Here, a simple active materials synthesis method is presented that boosts electrode performance and utilizes a facile screen‐printing technique to prepare scalable patterned flexible supercapacitors based on manganese hexacyanoferrate‐manganese oxide and electrochemically reduced graphene oxide electrode materials (MnHCF‐MnO_x/ErGO). A very simple in situ self‐reaction method is developed to introduce MnO_x pseudocapacitor material into the MnHCF system by using NH₄F. This MnHCF‐MnO_x electrode materials can deliver excellent capacitance of 467 F g^?1 at a current density of 1 A g^?1, which is a 2.4 times capacitance increase compared to MnHCF. In addition a printed, patterned, flexible MnHCF‐MnO_x/ErGO supercapacitor is fabricated, showing a remarkable areal capacitance of 16.8 mF cm^?2 and considerable energy and power density of 0.5 mWh cm^?2 and 0.0023 mW cm^?2, respectively. Furthermore, the printed patterned flexible supercapacitors also exhibit exceptional flexibility, and the capacitance remains stable, even while bending to various angles (60°, 90°, and 180°) and for 100 cycles. The flexible supercapacitor arrays integrated by multiple prepared single supercapacitors can power various LEDs even in the bent states. This approach offers promising opportunities for the development of printable energy storage materials and devices with high energy density, large scalability, and excellent flexibility.     

Wearable High‐Performance Supercapacitors Based on Silver‐Sputtered Textiles with FeCo2S4–NiCo2S4 Composite Nanotube‐Built Multitripod Architectures as Advanced Flexible Electrodes

To achieve high‐performance wearable supercapacitors (SCs), a new class of flexible electrodes with favorable architectures allowing large porosity, high conductivity, and good mechanical stability is strongly needed. Here, this study reports the rational design and fabrication of a novel flexible electrode with nanotube‐built multitripod architectures of ternary metal sulfides' composites (FeCo₂S₄–NiCo₂S₄) on a silver‐sputtered textile cloth. Silver sputtering is applicable to almost all kinds of textiles, and S^2? concentration is optimized during sulfidation process to achieve such architectures and also a complete sulfidation assuring high conductivity. New insights into concentration‐dependent sulfidation mechanism are proposed. The additive‐free FeCo₂S₄–NiCo₂S₄ electrode shows a high specific capacitance of 1519 F g^?1 at 5 mA cm^?2 and superior rate capability (85.1% capacitance retention at 40 mA cm^?2). All‐solid‐state SCs employing these advanced electrodes deliver high energy density of 46 W h kg^?1 at 1070 W kg^?1 as well as achieve remarkable cycling stability retaining 92% of initial capacitance after 3000 cycles at 10 mA cm^?2, and outstanding reliability with no capacitance degradation under large twisting. These are attributed to the components' synergy assuring rich redox reactions, high conductivity as well as highly porous but robust architectures. An almost linear increase in capacitance with devices' area indicates possibility to meet various energy output requirements. This work provides a general, low‐cost route to wearable power sources.     

A High‐Energy Density Asymmetric Supercapacitor Based on Fe2O3 Nanoneedle Arrays and NiCo2O4/Ni(OH)2 Hybrid Nanosheet Arrays Grown on SiC Nanowire Networks as Free‐Standing Advanced Electrodes

In this paper, a novel freestanding core‐branch negative and positive electrode material through integrating trim aligned Fe₂O₃ nanoneedle arrays (Fe₂O₃ NNAs) is first proposed with typical mesoporous structures and NiCo₂O₄/Ni(OH)₂ hybrid nanosheet arrays (NiCo₂O₄/Ni(OH)₂ HNAs) on SiC nanowire (SiC NW) skeletons with outstanding resistance to oxidation and corrosion, good conductivity, and large‐specific surface area. The original built SiC NWs@Fe₂O₃ NNAs is validated to be a highly capacitive negative electrode (721 F g^?1 at 2 A g^?1, i.e., 1 F cm^?2 at 2.8 mA cm^?2), matching well with the similarly constructed SiC NWs@NiCo₂O₄/Ni(OH)₂ HNAs positive electrode (2580 F g^?1 at 4 A g^?1, i.e., 3.12 F cm^?2 at 4.8 mA cm^?2). Contributed by the uniquely engineered electrodes, a high‐performance asymmetric supercapacitor (ASC) is developed, which can exhibit a maximum energy density of 103 W h kg^?1 at a power density of 3.5 kW kg^?1, even when charging the device within 6.5 s, the energy density can still maintain as high as 45 W h kg^?1 at 26.1 kW kg^?1, and the ASC manifests long cycling lifespan with 86.6% capacitance retention even after 5000 cycles. This pioneering work not only offers an attractive strategy for rational construction of high‐performance SiC NW‐based nanostructured electrodes materials, but also provides a fresh route for manufacturing next‐generation high‐energy storage and conversion systems.     

All‐Solid‐State Fiber Supercapacitors with Ultrahigh Volumetric Energy Density and Outstanding Flexibility

Fiber supercapacitors (FSCs) represent a promising class of energy storage devices that can complement or even replace microbatteries in miniaturized portable and wearable electronics. One of their main limitations, however, is the low volumetric energy density when compared with those of rechargeable batteries. Considering the energy density of FSC is proportional to CV² (E = 1/2 CV², where C is the capacitance and V is the operating voltage), one would explore high operating voltage as an effective strategy to promote the volumetric energy density. In the present work, an all‐solid‐state asymmetric FSC (AFSC) with a maximum operating voltage of 3.5 V is successfully achieved, by employing an ionic liquid (IL) incorporated gel‐polymer as the electrolyte (EMIMTFSI/PVDF‐HFP). The optimized AFSC is based on MnO_x@TiN nanowires@carbon nanotube (NWs@CNT) fiber as the positive electrode and C@TiN NWs@CNT fiber as the negative electrode, which gives rise to an ultrahigh stack volumetric energy density of 61.2 mW h cm^?3, being even comparable to those of commercially planar lead‐acid batteries (50–90 mW h cm^?3), and an excellent flexibility of 92.7% retention after 1000 blending cycles at 90°. The demonstration of employing the ILs‐based electrolyte opens up new opportunities to fabricate high‐performance flexible AFSC for future portable and wearable electronic devices.     

3D Printing Quasi‐Solid‐State Asymmetric Micro‐Supercapacitors with Ultrahigh Areal Energy Density

A 3D printing approach is first developed to fabricate quasi‐solid‐state asymmetric micro‐supercapacitors to simultaneously realize the efficient patterning and ultrahigh areal energy density. Typically, cathode, anode, and electrolyte inks with high viscosities and shear‐thinning rheological behaviors are first prepared and 3D printed individually on the substrates. The 3D printed asymmetric micro‐supercapacitor with interdigitated electrodes exhibits excellent structural integrity, a large areal mass loading of 3.1 mg cm^?2, and a wide electrochemical potential window of 1.6 V. Consequently, this 3D printed asymmetric micro‐supercapacitor displays an ultrahigh areal capacitance of 207.9 mF cm^?2. More importantly, an areal energy density of 73.9 µWh cm^?2 is obtained, superior to most reported interdigitated micro‐supercapacitors. It is believed that the efficient 3D printing strategy can be used to construct various asymmetric micro‐supercapacitors to promote the integration in on‐chip energy storage systems.     

Going Beyond Lithium Hybrid Capacitors: Proposing a New High‐Performing Sodium Hybrid Capacitor System for Next‐Generation Hybrid Vehicles Made with Bio‐Inspired Activated Carbon

A novel sodium hybrid capacitor (NHC) is constructed with an intercalation‐type sodium material [carbon coated‐Na₃V₂(PO₄)₃, C‐NVP] and high surface area‐activated carbon derived from an eco‐friendly resource cinnamon sticks (CDCs) in an organic electrolyte. This novel NHC possesses a combination of high energy and high power density, along with remarkable electrochemical stability. In addition, the C‐NVP/CDC system outperforms present, well‐established lithium hybrid capacitor systems in all areas, and can thus be added to the list of candidates for future electric vehicles. A careful optimization of mass balance between electrode materials enables the C‐NVP/CDC cell to exhibit extraordinary capacitance performance. This novel NHC produces an energy density of 118 Wh kg^?1 at a specific power of 95 W kg^?1 and retains an energy density of 60 Wh kg^?1 with high specific power of 850 W kg^?1. Furthermore, a discharge capacitance of 53 F g^?1 is obtained from the C‐NVP/CDC cell at a 1 mA cm^?2 current density, along with 95% capacitance retention, even after 10 000 cycles. The sluggish kinetics of the Na ion battery system is successfully overcome by developing a stable, high‐performing NHC system.     

All Pseudocapacitive MXene‐RuO2 Asymmetric Supercapacitors

2D transition metal carbides and nitrides, known as MXenes, are an emerging class of 2D materials with a wide spectrum of potential applications, in particular in electrochemical energy storage. The hydrophilicity of MXenes combined with their metallic conductivity and surface redox reactions is the key for high‐rate pseudocapacitive energy storage in MXene electrodes. However, symmetric MXene supercapacitors have a limited voltage window of around 0.6 V due to possible oxidation at high anodic potentials. In this study, the fact that titanium carbide MXene (Ti₃C₂T_x) can operate at negative potentials in acidic electrolyte is exploited, to design an all‐pseudocapacitive asymmetric device by combining it with a ruthenium oxide (RuO₂) positive electrode. This asymmetric device operates at a voltage window of 1.5 V, which is about two times wider than the operating voltage window of symmetric MXene supercapacitors, and is the widest voltage window reported to date for MXene‐based supercapacitors. The complementary working potential windows of MXene and RuO₂, along with proton‐induced pseudocapacitance, significantly enhance the device performance. As a result, the asymmetric devices can deliver an energy density of 37 µW h cm^?2 at a power density of 40 mW cm^?2, with 86% capacitance retention after 20 000 charge–discharge cycles. These results show that pseudocapacitive negative MXene electrodes can potentially replace carbon‐based materials in asymmetric electrochemical capacitors, leading to an increased energy density.     

Super‐Stretchable Zinc–Air Batteries Based on an Alkaline‐Tolerant Dual‐Network Hydrogel Electrolyte

Stretchable devices need elastic hydrogel electrolyte as an essential component, while most hydrogels will lose their stretchability after being incorporated with strong alkaline solution. This is why highly stretchable zinc–air batteries have never been reported so far. Herein, super‐stretchable, flat‐ (800% stretchable) and fiber‐shaped (500% stretchable) zinc–air batteries are first developed by designing an alkaline‐tolerant dual‐network hydrogel electrolyte. In the dual‐network hydrogel electrolyte, sodium polyacrylate (PANa) chains contribute to the formation of soft domains and the carboxyl groups neutralized by hydroxyls as well as cellulose as potassium hydroxide stabilizer are responsible for vastly enhanced alkaline tolerance. The obtained super‐stretchable, flat zinc–air battery exhibits a high power density of 108.6 mW?cm^?2, increasing to 210.5 mW?cm^?2 upon being 800% stretched. Similar phenomena are observed for the 500% stretchable fiber‐shaped batteries. The devices can maintain stable power output even after being heavily deformed benefiting from the highly soft, alkaline‐tolerant hydrogel electrolyte developed. A bendable battery‐display system and water proof weavable fiber zinc–air battery are also demonstrated. This work will facilitate the progress of using zinc–air battery powering flexible electronics and smart clothes. Moreover, the developed alkaline‐tolerant super‐stretchable electrolyte can also be applied for many other alkaline electrolyte‐based energy storage/conversion devices.     

Ultrafast All‐Solid‐State Coaxial Asymmetric Fiber Supercapacitors with a High Volumetric Energy Density

Fiber‐supercapacitors (FSCs) are promising energy storage devices that can complement or even replace microbatteries in miniaturized portable and wearable electronics. Currently, a major challenge for FSCs is achieving ultrahigh volumetric energy and power densities simultaneously, especially when the charge/discharge rates exceed 1 V s^?1. Herein, an Au‐nanoparticle‐doped‐MnO_x@CoNi‐alloy@carbon‐nanotube (Au–MnO_x@CoNi@CNT) core/shell nanocomposite fiber electrode is designed, aiming to boost its charge/discharge rate by taking advantage of the superconductive CoNi alloy network and the greatly enhanced conductivity of the Au doped MnO_x active materials. An all‐solid‐state coaxial asymmetric FSC (CAFSC) prototype device made by wrapping this fiber with a holey graphene paper (HGP) exhibits excellent performance at rates up to 10 V s^?1, which is the highest charge rate demonstrated so far for FSCs based on pseudocapacitive materials. Furthermore, our fully packaged CAFSC delivers a volumetric energy density of ≈15.1 mW h cm^?3, while simultaneously maintaining a high power density of 7.28 W cm^?3 as well as a long cycle life (90% retention after 10 000 cycles). This value is the highest among all reported FSCs, even better than that of a typical 4 V/500 µA h thin‐film lithium battery.     

Rational Construction of Self‐Standing Sulfur‐Doped Fe2O3 Anodes with Promoted Energy Storage Capability for Wearable Aqueous Rechargeable NiCo‐Fe Batteries

Aqueous rechargeable Ni‐Fe batteries featuring an ultra‐flat discharge plateau, low cost, and outstanding safety characteristics show promising prospects for application in wearable energy storage. In particular, fiber‐shaped Ni‐Fe batteries will enable textile‐based energy supply for wearable electronics. However, the development of fiber‐shaped Ni‐Fe batteries is currently challenged by the performance of fibrous Fe‐based anode materials. In this context, this study describes the fabrication of sulfur‐doped Fe₂O₃ nanowire arrays (S‐Fe₂O₃ NWAs) grown on carbon nanotube fibers (CNTFs) as an innovative anode material (S‐Fe₂O₃ NWAs/CNTF). Encouragingly, first‐principle calculations reveal that S‐doping in Fe₂O₃ can dramatically reduce the band gap from 2.34 to 1.18 eV and thus enhance electronic conductivity. The novel developed S‐Fe₂O₃ NWAs/CNTF electrode is further demonstrated to deliver a very high capacity of 0.81 mAh cm^?2 at 4 mA cm^?2. This value is almost sixfold higher than that of the pristine Fe₂O₃ NWAs/CNTF electrode. When a cathode containing zinc‐nickel‐cobalt oxide (ZNCO)@Ni(OH)₂ NWAs heterostructures is used, 0.46 mAh cm^?2 capacity and 67.32 mWh cm^?3 energy density are obtained for quasi‐solid‐state fiber‐shaped NiCo‐Fe batteries, which outperform most state‐of‐the‐art fiber‐shaped aqueous rechargeable batteries. These findings offer an innovative and feasible route to design high‐performance Fe‐based anodes and may inspire new development for the next‐generation wearable Ni‐Fe batteries.     

Graphitic Petal Electrodes for All‐Solid‐State Flexible Supercapacitors

The charge storage characteristics of a composite nanoarchitecture with a highly functional 3D morphology are reported. The electrodes are formed by the electropolymerization of aniline monomers into a nanometer‐thick polyaniline (PANI) film that conformally coats graphitic petals (GPs) grown by microwave plasma chemical vapor deposition (MPCVD) on conductive carbon cloth (CC). The hybrid CC/GPs/PANI electrodes yield results near the theoretical maximum capacitance for PANI of 2000 F g^?1 (based on PANI mass) and a large area‐normalized specific capacitance of ≈2.6 F cm^?2 (equivalent to a volumetric capacitance of ≈230 F cm^?3) at a low current density of 1 A g^?1 (based on PANI mass). The specific capacitances remain above 1200 F g^?1 (based on PANI mass) for currents up to 100 A g^?1 with correspondingly high area‐normalized values. The hybrid electrodes also exhibit a high rate capability with an energy density of 110 Wh kg^?1 and a maximum power density of 265 kW kg^?1 at a current density of 100 A g^?1. Long‐term cyclic stability is good (≈7% loss of initial capacitance after 2000 cycles), with coulombic efficiencies >99%. Moreover, prototype all‐solid‐state flexible supercapacitors fabricated from these hybrid electrodes exhibit excellent energy storage performance.     

All‐Solid‐State On‐Chip Supercapacitors Based on Free‐Standing 4H‐SiC Nanowire Arrays

All‐solid‐state on‐chip SiC supercapacitors (SCs) based on free‐standing SiC nanowire arrays (NWAs) are reported. In comparison to the widely used technique based on the interdigitated fingers, the present strategy can be much more facile for constructing on‐chip SCs devices, which is directly sandwiched with a solid electrolyte layer between two pieces of SiC NWAs film without any substrate. The mass loading of active materials of on‐chip SiC SCs can be up to ≈5.6 mg cm^?2, and the total device thickness is limited in ≈40 µm. The specific area energy and power densities of the SCs device reach 5.24 µWh cm^?2 and 11.2 mW cm^?2, and their specific volume energy and power densities run up to 1.31 mWh cm^–3 and 2.8 W cm^?3, respectively, which are two orders of magnitude higher than those of state‐of‐the‐art SiC‐based SCs, and also much higher than those of other solid‐state carbon‐based SCs ever reported. Furthermore, such on‐chip SCs exhibit superior rate capability and robust stability with over 94% capacitance retention after 10 000 cycles at a scan rate of 100 mV s^?1, representing their high performance in all merits.     

Rechargeable Soft‐Matter EGaIn‐MnO2 Battery for Stretchable Electronics

A rechargeable, stretchable battery composed of a liquid metal alloy (eutectic gallium‐indium; EGaIn) anode, a carbon paste, and MnO₂ slurry cathode, an alkaline electrolytic hydrogel, and a soft elastomeric package is presented. The battery can stably cycle within a voltage range of 1.40–1.86 V at 1 mA cm^?2 while being subject to 100% tensile strain. This is accomplished through a mechanism that involves reversible stripping and plating of gallium along with MnO₂ chemical conversion. Moreover, a technique to increase the contact area between the EGaIn anode and hydrogel interface using CaCl₂ additives, which reduces polarization and therefore reduces the effective current density, leading to higher discharge plateaus and lower charge plateaus. Relative to previous attempts at energy storage with liquid metal, the EGaIn‐MnO₂ battery presented here shows an exceptional areal specific capacity (≈3.8 mAh cm^?2) and robust, stable rechargeability over >100 charging cycles. The battery is also stable under bending, with negligible change in electrochemical properties when bent to a 2 mm radius of curvature. Batteries embedded within a wearable elastomeric sleeve can power a blue light‐emitting diode and strain‐sensing circuit. These demonstrations suggest that stretchable EGaIn‐MnO₂ batteries are feasible for applications in wearable energy‐storage electronics.     

Achieving Ultrahigh Energy Densities of Supercapacitors with Porous Titanium Carbide/Boron‐Doped Diamond Composite Electrodes

The energy densities of most supercapacitors (SCs) are low, hindering their practical applications. To construct SCs with ultrahigh energy densities, a porous titanium carbide (TiC)/boron‐doped diamond (BDD) composite electrode is synthesized on a titanium plate that is pretreated using a plasma electrolytic oxidation (PEO) technique. The porous and nanometer‐thick TiO₂ layer formed during PEO process prevents the formation of brittle titanium hydride and enhances the BDD growth during chemical vapor deposition processes. Meanwhile, the in situ conversion of TiO₂ into TiC is achieved. Combination of this capacitor electrode with soluble redox electrolytes leads to the fabrication of high‐performance SCs in both aqueous and organic solutions. In 0.05 m Fe(CN)₆^3?/4? + 1 m Na₂SO₄ aqueous solution, the capacitance is as high as 46.3 mF cm^?2 at a current density of 1 mA cm^?2; this capacitance remains 92% of its initial value even after 10 000 charge/discharge cycles; the energy density is up to 47.4 Wh kg^?1 at a power density of 2236 W kg^?1. The performance of constructed SCs is superior to most available SCs and some electrochemical energy storage devices like batteries. Such a porous capacitor electrode is thus promising for the construction of high‐performance SCs for practical applications.     

Flexible Asymmetric Micro‐Supercapacitors Based on Bi2O3 and MnO2 Nanoflowers: Larger Areal Mass Promises Higher Energy Density

A flexible asymmetric supercapacitor (ASC) with high energy density is designed and fabricated using flower‐like Bi₂O₃ and MnO₂ grown on carbon nanofiber (CNF) paper as the negative and positive electrodes, respectively. The lightweight (1.6 mg cm^?2), porous, conductive, and flexible features make the CNF paper an ideal support for guest active materials, which permit a large areal mass of 9 mg cm^?2 for Bi₂O₃ (≈85 wt% of the entire electrode). Thus, the optimal device with an operation voltage of 1.8 V can deliver a high energy density of 43.4 μWh cm^?2 (11.3 W h kg^?1, based on the total electrodes) and a maximum power density of 12.9 mW cm^?2 (3370 W kg^?1). This work provides an example of large areal mass and flexible electrode for ASCs with high areal capacitance and high energy density, holding great promise for future flexible electronic devices.     

High‐Performance and Breathable Polypyrrole Coated Air‐Laid Paper for Flexible All‐Solid‐State Supercapacitors

High‐performance, breathable, conductive, and flexible polypyrrole (PPy) coated paper electrodes are prepared by an interfacial polymerization method using air‐laid paper as a substrate. Owing to the synergistic effect of superior electrical conductivity, high wettability, and the porous architecture, the prepared electrode not only shows an outstanding specific capacitance and rate abilities (3100 and 2579 mF cm^?2 at 1 and 20 mA cm^?2 for a PPy coated paper electrode), but also exhibits excellent flexibility, wearability, and breathability. Based on these superior features, an all‐solid‐state supercapacitor assembled with the PPy coated paper electrodes shows an outstanding energy density of 62.4 µW h cm^?2, remarkable air permeability and excellent flexibility to sustain various deformations. Furthermore, large‐scale fabrication of conductive flexible paper electrode can be easily achieved through this method. Therefore, this work offers a new vision for flexible energy storage.     

Highly Stable Supercapacitors with Conducting Polymer Core‐Shell Electrodes for Energy Storage Applications

Conducting polymers such as polyaniline (PAni) show a great potential as pseudocapacitor materials for electrochemical energy storage applications. Yet, the cycling instability of PAni resulting from structural alteration is a major hurdle to its commercial application. Here, the development of nanostructured PAni–RuO₂ core–shell arrays as electrodes for highly stable pseudocapacitors with excellent energy storage performance is reported. A thin layer of RuO₂ grown by atomic layer deposition (ALD) on PAni nanofibers plays a crucial role in stabilizing the PAni pseudocapacitors and improving their energy density. The pseudocapacitors, which are based on optimized PAni–RuO₂ core–shell nanostructured electrodes, exhibit very high specific capacitance (710 F g^?1 at 5 mV s^?1) and power density (42.2 kW kg^?1) at an energy density of 10 Wh kg^?1. Furthermore, they exhibit remarkable capacitance retention of ≈88% after 10 000 cycles at very high current density of 20 A g^?1, superior to that of pristine PAni‐based pseudocapacitors. This prominently enhanced electrochemical stability successfully demonstrates the buffering effect of ALD coating on PAni, which provides a new approach for the preparation of metal‐oxide/conducting polymer hybrid electrodes with excellent electrochemical performance.     

Structure‐Controlled,Vertical Graphene‐Based,Binder‐Free Electrodes from Plasma‐Reformed Butter Enhance Supercapacitor Performance

Vertical graphene nanosheets (VGNS) hold great promise for high‐performance supercapacitors owing to their excellent electrical transport property, large surface area and in particular, an inherent three‐dimensional, open network structure. However, it remains challenging to materialise the VGNS‐based supercapacitors due to their poor specific capacitance, high temperature processing, poor binding to electrode support materials, uncontrollable microstructure, and non‐cost effective way of fabrication. Here we use a single‐step, fast, scalable, and environmentally‐benign plasma‐enabled method to fabricate VGNS using cheap and spreadable natural fatty precursor butter, and demonstrate the controllability over the degree of graphitization and the density of VGNS edge planes. Our VGNS employed as binder‐free supercapacitor electrodes exhibit high specific capacitance up to 230 F g^?1 at a scan rate of 10 mV s^?1 and >99% capacitance retention after 1,500 charge‐discharge cycles at a high current density, when the optimum combination of graphitic structure and edge plane effects is utilised. The energy storage performance can be further enhanced by forming stable hybrid MnO₂/VGNS nano‐architectures which synergistically combine the advantages from both VGNS and MnO₂. This deterministic and plasma‐unique way of fabricating VGNS may open a new avenue for producing functional nanomaterials for advanced energy storage devices.