Fast Sodium Storage in TiO2@CNT@C Nanorods for High‐Performance Na‐Ion Capacitors

Na‐ion capacitors have attracted extensive interest due to the combination of the merits of high energy density of batteries and high power density as well as long cycle life of capacitors. Here, a novel Na‐ion capacitor, utilizing TiO₂@CNT@C nanorods as an intercalation‐type anode and biomass‐derived carbon with high surface area as an ion adsorption cathode in an organic electrolyte, is reported. The advanced architecture of TiO₂@CNT@C nanorods, prepared by electrospinning method, demonstrates excellent cyclic stability and outstanding rate capability in half cells. The contribution of extrinsic pseudocapacitance affects the rate capability to a large extent, which is identified by kinetics analysis. A key finding is that ion/electron transfer dynamics of TiO₂@CNT@C could be effectively enhanced due to the addition of multiwalled carbon nanotubes. Also, the biomass‐derived carbon with high surface area displays high specific capacity and excellent rate capability. Owing to the merits of structures and excellent performances of both anode and cathode materials, the assembled Na‐ion capacitors provide an exceptionally high energy density (81.2 W h kg^?1) and high power density (12 400 W kg^?1) within 1.0–4.0 V. Meanwhile, the Na‐ion capacitors achieve 85.3% capacity retention after 5000 cycles tested at 1 A g^?1.     

Amorphous Tin‐Based Composite Oxide: A High‐Rate and Ultralong‐Life Sodium‐Ion‐Storage Material

Energy‐storage technology is moving beyond lithium batteries to sodium as a result of its high abundance and low cost. However, this sensible transition requires the discovery of high‐rate and long‐lifespan anode materials, which remains a significant challenge. Here, the facile synthesis of an amorphous Sn₂P₂O₇/reduced graphene oxide nanocomposite and its sodium storage performance between 0.01 and 3.0 V are reported for the first time. This hybrid electrode delivers a high specific capacity of 480 mA h g^?1 at a current density of 50 mA g^?1 and superior rate performance of 250 and 165 mA h g^?1 at 2 and 10 A g^?1, respectively. Strikingly, this anode can sustain 15 000 cycles while retaining over 70% of the initial capacity. Quantitative kinetic analysis reveals that the sodium storage is governed by pseudocapacitance, particularly at high current rates. A full cell with sodium super ionic conductor (NASICON)‐structured Na₃V₂(PO₄)₂F₃ and Na₃V₂(PO₄)₃ as cathodes exhibits a high energy density of over 140 W h kg^?1 and a power density of nearly 9000 W kg^?1 as well as stability over 1000 cycles. This exceptional performance suggests that the present system is a promising power source for promoting the substantial use of low‐cost energy storage systems.     

Layer‐by‐Layer Na3V2(PO4)3 Embedded in Reduced Graphene Oxide as Superior Rate and Ultralong‐Life Sodium‐Ion Battery Cathode

Na₃V₂(PO₄)₃ (NVP) is regarded as a promising cathode for advanced sodium‐ion batteries (SIBs) due to its high theoretical capacity and stable sodium (Na) super ion conductor (NASICON) structure. However, strongly impeded by its low electronic conductivity, the general NVP delivers undesirable rate capacity and fails to meet the demands for quick charge. Herein, a novel and facile synthesis of layer‐by‐layer NVP@reduced graphene oxide (rGO) nanocomposite is presented through modifying the surface charge of NVP gel precursor. The well‐designed layered NVP@rGO with confined NVP nanocrystal in between rGO layers offers high electronic and ionic conductivity as well as stable structure. The NVP@rGO nanocomposite with merely ≈3.0 wt% rGO and 0.5 wt% amorphous carbon, yet exhibits extraordinary electrochemical performance: a high capacity (118 mA h g^?1 at 0.5 C attaining the theoretical value), a superior rate capability (73 mA h g^?1 at 100 C and even up to 41 mA h g^?1 at 200 C), ultralong cyclability (70.0% capacity retention after 15 000 cycles at 50 C), and stable cycling performance and excellent rate capability at both low and high operating temperatures. The proposed method and designed layer‐by‐layer active nanocrystal@rGO strategy provide a new avenue to create nanostructures for advanced energy storage applications.     

Mesoporous MoS2 as a Transition Metal Dichalcogenide Exhibiting Pseudocapacitive Li and Na‐Ion Charge Storage

The ion insertion properties of MoS₂ continue to be of widespread interest for energy storage. While much of the current work on MoS₂ has been focused on the high capacity four‐electron reduction reaction, this process is prone to poor reversibility. Traditional ion intercalation reactions are highlighted and it is demonstrated that ordered mesoporous thin films of MoS₂ can be utilized as a pseudocapacitive energy storage material with a specific capacity of 173 mAh g^?1 for Li‐ions and 118 mAh g^?1 for Na‐ions at 1 mV s^?1. Utilizing synchrotron grazing incidence X‐ray diffraction techniques, fast electrochemical kinetics are correlated with the ordered porous structure and with an iso‐oriented crystal structure. When Li‐ions are utilized, the material can be charged and discharged in 20 seconds while still achieving a specific capacity of 140 mAh g^?1. Moreover, the nanoscale architecture of mesoporous MoS₂ retains this level of lithium capacity for 10 000 cycles. A detailed electrochemical kinetic analysis indicates that energy storage for both ions in MoS₂ is due to a pseudocapacitive mechanism.     

A New P2‐Type Layered Oxide Cathode with Extremely High Energy Density for Sodium‐Ion Batteries

Herein, a new P2‐type layered oxide is proposed as an outstanding intercalation cathode material for high energy density sodium‐ion batteries (SIBs). On the basis of the stoichiometry of sodium and transition metals, the P2‐type Na_0.55[Ni_0.1Fe_0.1Mn_0.8]O₂ cathode is synthesized without impurities phase by partially substituting Ni and Fe into the Mn sites. The partial substitution results in a smoothing of the electrochemical charge/discharge profiles and thus greatly improves the battery performance. The P2‐type Na_0.55[Ni_0.1Fe_0.1Mn_0.8]O₂ cathode delivers an extremely high discharge capacity of 221.5 mAh g^?1 with a high average potential of ≈2.9 V (vs Na/Na⁺) for SIBs. In addition, the fast Na‐ion transport in the P2‐type Na_0.55[Ni_0.1Fe_0.1Mn_0.8]O₂ cathode structure enables good power capability with an extremely high current density of 2400 mA g^?1 (full charge/discharge in 12 min) and long‐term cycling stability with ≈80% capacity retention after 500 cycles at 600 mA g^?1. A combination of electrochemical profiles, in operando synchrotron X‐ray diffraction analysis, and first‐principles calculations are used to understand the overall Na storage mechanism of P2‐type Na_0.55[Ni_0.1Fe_0.1Mn_0.8]O₂.     

Spontaneous Growth of 3D Framework Carbon from Sodium Citrate for High Energy‐ and Power‐Density and Long‐Life Sodium‐Ion Hybrid Capacitors

Carbon sheets with 3D architectures, large graphitic interlayer spacing, and high electrical conductivity are highly expected to be an ideal anode material for sodium‐ion hybrid capacitors (SIHCs). Pursuing a simple synthesis methodology and advancing it from the laboratory to industry is of great importance. In this study, a new approach is presented to prepare 3D framework carbon (3DFC) with the above integrated advantages by a direct calcination of sodium citrate without aid of any additional carbon source, template, or catalyst. The first‐principle calculations verify that the large interlayer spacing and the curvature structure of 3DFC facilitate the sodium ion insertion/extraction. As a consequence, the optimal 3DFC sample exhibits high reversible capacity as well as excellent rate and cycling performance. On this basis, a dual‐carbon SIHC is fabricated by employing 3DFC as battery‐type anode and 3DFC‐derived nanoporous carbon as capacitor‐type cathode. It is able to deliver high energy‐ and power‐density feature as well as outstanding long‐term cycling stability in the potential range of 0–4.0 V. This study may open an avenue for developing high‐performance carbon electrode materials and pushes the practical applications of SIHCs a decisive step forward.     

Confining Ultrathin 2D Superlattices in Mesoporous Hollow Spheres Renders Ultrafast and High‐Capacity Na‐Ion Storage

Sodium‐ion batteries have attracted ever‐increasing attention in view of the natural abundance of sodium resources. Sluggish sodiation kinetics, nevertheless, remain a tough challenge, in terms of achieving high rate capability and high energy density. Herein, a sheet‐in‐sphere nanoconfiguration of 2D titania–carbon superlattices vertically aligned inside of mesoporous TiO₂@C hollow nanospheres is constructed. In such a design, the ultrathin 2D superlattices consist of ordered alternating monolayers of titania and carbon, enabling interpenetrating pathways for rapid transport of electrons and Na⁺ ions as well as a 2D heterointerface for Na⁺ storage. Kinetics analysis discloses that the combination of 2D heterointerface and mesoporosity results an intercalation pseudocapacitive charge storage mechanism, which triggers ultrafast sodiation kinetics. In situ transmission electron microscope imaging and in situ synchrotron X‐ray diffraction techniques elucidate that the sheet‐in‐sphere architecture can maintain robust mechanical and crystallographic structural stability, resulting an extraordinary high rate capability, remarkable stable cycling with a low capacity fading ratio of 0.04% per cycle over 500 cycles at 0.2 C, and exceptionally long‐term cyclability up to 20 000 cycles at 50 C. This study offers a method for the realization of a high power density and long‐term cyclability battery by designing of a hierarchical nanoarchitecture.     

Uniform Pomegranate‐Like Nanoclusters Organized by Ultrafine Transition Metal Oxide@Nitrogen‐Doped Carbon Subunits with Enhanced Lithium Storage Properties

Uniform pomegranate‐like nanoclusters (NCs) organized by ultrafine transition metal oxide@nitrogen‐doped carbon (TMO@N–C) subunits (diameter ≈ 4 nm) are prepared on a large scale for the first time through a facile, novel, and one‐pot approach. Taking pomegranate‐like Fe₃O₄@N–C NCs as an example, this unique structure provides short Li⁺/electron diffusion pathways for electrochemical reactions, structural stability during cycling, and high electrical conductivity, leading to superior electrochemical performance. The resulting pomegranate‐like Fe₃O₄@N–C NCs possess a high specific capacity (1204.3 mA h g^?1 at 0.5 A g^?1 over 100 cycles), a stable cycle life (1063.0 mA h g^?1 at 1 A g^?1, 98.4% retention after 1000 cycles), and excellent rate capacities (606.0 mA h g^?1 at 10 A g^?1, 92.0% retention; 417.1 mA h g^?1 at 20 A g^?1, 91.7% retention after 1000 cycles).     

Sodium Vanadium Fluorophosphates (NVOPF) Array Cathode Designed for High‐Rate Full Sodium Ion Storage Device

3D batteries continue to be of widespread interest for flexible energy storage where the 3D nanostructured cathode is the key component to achieve both high energy and power densities. While current work on flexible cathodes tends to emphasize the use of flexible scaffolds such as graphene and/or carbon nanotubes, this approach is often limited by poor electrical contact and structural stability. This communication presents a novel synthetic approach to form 3D array cathode for the first time, the single‐crystalline Na₃(VO)₂(PO₄)₂F (NVOPF) by using VO₂ array as a seed layer. The NVOPF cathode exhibits both high‐rate capability (charge/discharge in 60 s) and long‐term durability (10,000 cycles at 50 C) for Na ion storage. Utilizing in situ X‐ray diffraction and first principles calculations, the high‐rate properties are correlated with the small volume change, 2D fast ion transport, and the array morphology. A novel all‐array flexible Na⁺ hybrid energy storage device based on pairing the intercalation‐type NVOPF array cathode with a cogenetic pseudocapacitive VO₂ nanosheet array anode is demonstrated.     

KTi2(PO4)3 with Large Ion Diffusion Channel for High‐Efficiency Sodium Storage

To accommodate the decreasing lithium resource and ensure continuous development of energy storage industry, sodium‐based batteries are widely studied to inherit the next generation of energy storage devices. In this work, a novel Na super ionic conductor type KTi₂(PO₄)₃/carbon nanocomposite is designed and fabricated as sodium storage electrode materials, which exhibits considerable reversible capacity (104 mAh g^?1 under the rate of 1 C with flat voltage plateaus at ≈2.1 V), high‐rate cycling stability (74.2% capacity retention after 5000 cycles at 20 C), and ultrahigh rate capability (76 mAh g^?1 at 100 C) in sodium ion batteries. Besides, the maximum ability for sodium storage is deeply excavated by further investigations about different voltage windows in half and full sodium ion cells. Meanwhile, as cathode material in sodium‐magnesium hybrid batteries, the KTi₂(PO₄)₃/carbon nanocomposite also displays good electrochemical performances (63 mAh g^?1 at the 230th cycle under the voltage window of 1.0–1.9 V). The results demonstrate that the KTi₂(PO₄)₃/carbon nanocomposite is a promising electrode material for sodium ion storage, and lay theoretical foundations for the development of new type of batteries.     

Hydrogenated Core–Shell MAX@K2Ti8O17 Pseudocapacitance with Ultrafast Sodium Storage and Long‐Term Cycling

Sodium‐ion batteries are considered alternatives to lithium‐ion batteries for energy storage devices due to their competitive cost and source abundance. However, the development of electrode materials with long‐term stability and high capacity remains a great challenge. Here, this paper describes for the first time the synthesis of a new class of core–shell MAX@K₂Ti₈O₁₇ by alkaline hydrothermal reaction and hydrogenation of MAX, which grants high sodium ion‐intercalation pseudocapacitance. This composite electrode displays extraordinary reversible capacities of 190 mA h g^?1 at 200 mA g^?1 (0.9 C, theoretical value of ≈219 mA h g^?1) and 150 mA h g^?1 at 1000 mA g^?1 (4.6 C). More importantly, a reversible capacity of 75 mA h g^?1 at 10 000 mA g^?1 (46 C) is retained without any apparent capacity decay even after more than 10 000 cycles. Experimental tests and first‐principle calculations confirm that the increase in Ti³⁺ on the surface layers of MAX@K₂Ti₈O₁₇ by hydrogenation increases its conductivity in addition to enhancing the sodium‐ion intercalation pseudocapacitive process. Furthermore, the distorted dodecahedrons between Ti and O layers not only provide abundant sites for sodium‐ion accommodation but also act as wide tunnels for sodium‐ion transport.     

Manipulating Adsorption–Insertion Mechanisms in Nanostructured Carbon Materials for High‐Efficiency Sodium Ion Storage

Hard carbon is one of the most promising anode materials for sodium‐ion batteries, but the low Coulombic efficiency is still a key barrier. In this paper, a series of nanostructured hard carbon materials with controlled architectures is synthesized. Using a combination of in situ X‐ray diffraction mapping, ex situ nuclear magnetic resonance (NMR), electron paramagnetic resonance, electrochemical techniques, and simulations, an “adsorption–intercalation” mechanism is established for Na ion storage. During the initial stages of Na insertion, Na ions adsorb on the defect sites of hard carbon with a wide adsorption energy distribution, producing a sloping voltage profile. In the second stage, Na ions intercalate into graphitic layers with suitable spacing to form NaC _x compounds similar to the Li ion intercalation process in graphite, producing a flat low voltage plateau. The cation intercalation with a flat voltage plateau should be enhanced and the sloping region should be avoided. Guided by this knowledge, nonporous hard carbon material has been developed which has achieved high reversible capacity and Coulombic efficiency to fulfill practical application.     

Pseudocapacitive Charge Storage in Thick Composite MoS2 Nanocrystal‐Based Electrodes

A synthesis methodology is demonstrated to produce MoS₂ nanoparticles with an expanded atomic lamellar structure that are ideal for Faradaic‐based capacitive charge storage. While much of the work on MoS₂ focuses on the high capacity conversion reaction, that process is prone to poor reversibility. The pseudocapacitive intercalation‐based charge storage reaction of MoS₂ is investigated, which is extremely fast and highly reversible. A major challenge in the field of pseudocapacitive‐based energy storage is the development of thick electrodes from nanostructured materials that can sustain the fast inherent kinetics of the active nanocrystalline material. Here a composite electrode comprised of a poly(acrylic acid) binder, carbon fibers, and carbon black additives is utilized. These electrodes deliver a specific capacity of 90 mAh g^?1 in less than 20 s and can be cycled 3000 times while retaining over 80% of the original capacity. Quantitative kinetic analysis indicates that over 80% of the charge storage in these MoS₂ nanocrystals is pseudocapacitive. Asymmetric full cell devices utilizing a MoS₂ nanocrystal‐based electrode and an activated carbon electrode achieve a maximum power density of 5.3 kW kg^?1 (with 6 Wh kg^?1 energy density) and a maximum energy density of 37 Wh kg^?1 (with 74 W kg^?1power density).     

Boosting Fast Sodium Storage of a Large‐Scalable Carbon Anode with an Ultralong Cycle Life

Sodium‐ion batteries (SIBs) are considered to be a promising alternative for large‐scale electricity storage. However, it is urgent to develop new anode materials with superior ultralong cycle life performance at high current rates. Herein, a low‐cost and large‐scalable sulfur‐doped carbon anode material that exhibits the best high‐rate cycle performance and the longest cycle life ever reported for carbon anodes is developed. The material delivers a reversible capacity of 142 mA h g^?1 at a current rate up to 10 A g^?1. After 10 000 cycles the capacity is remained at 126.5 mA h g^?1; 89.1% of the initial value. Density functional theory computations demonstrate that the sulfur‐doped carbon has a strong binding affinity for sodium which promotes sodium storage. Meanwhile, the kinetics analysis identifies the capacitive charge storage as a large contributor to sodium storage, which favors ultrafast storage of sodium ions. These results demonstrate a new way to design carbon‐based SIBs anodes for next‐generation large‐scale electricity storage.     

Nanosheets‐Assembled CuSe Crystal Pillar as a Stable and High‐Power Anode for Sodium‐Ion and Potassium‐Ion Batteries

Thanks to low costs and the abundance of the resources, sodium‐ion (SIBs) and potassium‐ion batteries (PIBs) have emerged as leading candidates for next‐generation energy storage devices. So far, only few materials can serve as the host for both Na⁺ and K⁺ ions. Herein, a cubic phase CuSe with crystal‐pillar‐like morphology (CPL‐CuSe) assembled by the nanosheets are synthesized and its dual functionality in SIBs and PIBs is comprehensively studied. The electrochemical measurements demonstrate that CPL‐CuSe enables fast Na⁺ and K⁺ storage as well as the sufficiently long duration. Specifically, the anode delivers a specific capacity of 295 mA h g^?1 at current density of 10 A g^?1 in SIBs, while 280 mA h g^?1 at 5 A g^?1 in PIBs, as well as the high capacity retention of nearly 100% over 1200 cycles and 340 cycles, respectively. Remarkably, CPL‐CuSe exhibits a high initial coulombic efficiency of 91.0% (SIBs) and 92.4% (PIBs), superior to most existing selenide anodes. A combination of in situ X‐ray diffraction and ex situ transmission electron microscopy tests fundamentally reveal the structural transition and phase evolution of CuSe, which shows a reversible conversion reaction for both cells, while the intermediate products are different due to the sluggish K⁺ insertion reaction.     

A Novel Graphene Oxide Wrapped Na2Fe2(SO4)3/C Cathode Composite for Long Life and High Energy Density Sodium‐Ion Batteries

The cathode materials in the Na‐ion battery system are always the key issue obstructing wider application because of their relatively low specific capacity and low energy density. A graphene oxide (GO) wrapped composite, Na₂Fe₂(SO₄)₃@C@GO, is fabricated via a simple freeze‐drying method. The as‐prepared material can deliver a 3.8 V platform with discharge capacity of 107.9 mAh g^?1 at 0.1 C (1 C = 120 mA g^?1) as well as offering capacity retention above 90% at a discharge rate of 0.2 C after 300 cycles. The well‐constructed carbon network provides fast electron transfer rates, and thus, higher power density also can be achieved (75.1 mAh g^?1 at 10 C). The interface contribution of GO and Na₂Fe₂(SO₄)₃ is recognized and studied via density function theory calculation. The Na storage mechanism is also investigated through in situ synchrotron X‐ray diffraction, and pseudocapacitance contributions are also demonstrated. The diffusion coefficient of Na⁺ ions is around 10^?12–10^?10.8 cm² s^?1 during cycling. The higher working voltage of this composite is mainly ascribed to the larger electronegativity of the element S. The research indicates that this well‐constructed composite would be a competitive candidate as a cathode material for Na‐ion batteries.     

Sodium Storage and Transport Properties in Layered Na2Ti3O7 for Room‐Temperature Sodium‐Ion Batteries

Layered sodium titanium oxide, Na₂Ti₃O₇, is synthesized by a solid‐state reaction method as a potential anode for sodium‐ion batteries. Through optimization of the electrolyte and binder, the microsized Na₂Ti₃O₇ electrode delivers a reversible capacity of 188 mA h g^?1 in 1 M NaFSI/PC electrolyte at a current rate of 0.1C in a voltage range of 0.0–3.0 V, with sodium alginate as binder. The average Na storage voltage plateau is found at ca. 0.3 V vs. Na⁺/Na, in good agreement with a first‐principles prediction of 0.35 V. The Na storage properties in Na₂Ti₃O₇ are investigated from thermodynamic and kinetic aspects. By reducing particle size, the nanosized Na₂Ti₃O₇ exhibits much higher capacity, but still with unsatisfied cyclic properties. The solid‐state interphase layer on Na₂Ti₃O₇ electrode is analyzed. A zero‐current overpotential related to thermodynamic factors is observed for both nano‐ and microsized Na₂Ti₃O₇. The electronic structure, Na⁺ ion transport and conductivity are investigated by the combination of first‐principles calculation and electrochemical characterizations. On the basis of the vacancy‐hopping mechanism, a quasi‐3D energy favorable trajectory is proposed for Na₂Ti₃O₇. The Na⁺ ions diffuse between the TiO₆ octahedron layers with pretty low activation energy of 0.186 eV.