Redox Targeting of Anatase TiO2 for Redox Flow Lithium‐Ion Batteries

Anatase TiO₂ is an extensively studied anode material for lithium‐ion batteries because of its superior capability of storing Li⁺ electrochemically. Here reversible lithium storage of TiO₂ is achieved chemically using redox targeting reactions. In the presence of a pair of redox mediators, bis(pentamethylcyclopentadienyl)cobalt (CoCp^* ₂) and cobaltocene (CoCp₂) in an electrolyte, TiO₂ and its lithiated form Li _x TiO₂ can be reduced and oxidized by CoCp^* ₂ and CoCp₂ ⁺, respectively, which accompany Li⁺ insertion and extraction, albeit without attaching the TiO₂ onto the electrode. The reversible chemical lithiation/delithiation and the involved phase transitions are unambiguously confirmed using density functional theory (DFT) calculations, UV‐vis spectroscopy, X‐ray photoelectron spectoscopy (XPS), and Raman spectroscopy. A redox flow lithium‐ion battery (RFLB) half‐cell is assembled and evaluated, which is a critical step towards the development of RFLB full cells.     

Annulated Dialkoxybenzenes as Catholyte Materials for Non‐aqueous Redox Flow Batteries: Achieving High Chemical Stability through Bicyclic Substitution

1,4‐Dimethoxybenzene derivatives are materials of choice for use as catholytes in non‐aqueous redox flow batteries, as they exhibit high open‐circuit potentials and excellent electrochemical reversibility. However, chemical stability of these materials in their oxidized form needs to be improved. Disubstitution in the arene ring is used to suppress parasitic reactions of their radical cations, but this does not fully prevent ring‐addition reactions. By incorporating bicyclic substitutions and ether chains into the dialkoxybenzenes, a novel catholyte molecule, 9,10‐bis(2‐methoxyethoxy)‐1,2,3,4,5,6,7,8‐octahydro‐1,4:5,8‐dimethanenoanthracene (BODMA), is obtained and exhibits greater solubility and superior chemical stability in the charged state. A hybrid flow cell containing BODMA is operated for 150 charge–discharge cycles with a minimal loss of capacity.     

A High‐Performance Composite Electrode for Vanadium Redox Flow Batteries

A composite electrode composed of reduced graphene oxide‐graphite felt (rGO‐GF) with excellent electrocatalytic redox reversibility toward V²⁺/V³⁺ and VO²⁺/VO₂⁺ redox couples in vanadium batteries was fabricated by a facile hydrothermal method. Compared with the pristine graphite felt (GF) electrode, the rGO‐GF composite electrode possesses abundant oxygen functional groups, high electron conductivity, and outstanding stability. Its corresponding energy efficiency and discharge capacity are significantly increased by 20% and 300%, respectively, at a high current density of 150 mA cm^?2. Moreover, a discharge capacity of 20 A h L^?1 is obtained with a higher voltage efficiency (74.5%) and energy efficiency (72.0%), even at a large current density of 200 mA cm^?2. The prepared rGO‐GF composite electrode holds great promise as a high‐performance electrode for vanadium redox flow battery (VRFB).     

Designing Redox‐Stable Cobalt–Polypyridyl Complexes for Redox Flow Batteries: Spin‐Crossover Delocalizes Excess Charge

Redox‐active organometallic molecules offer a promising avenue for increasing the energy density and cycling stability of redox flow batteries. The molecular properties change dramatically as the ligands are functionalized and these variations allow for improving the solubility and controlling the redox potentials to optimize their performance when used as electrolytes. Unfortunately, it has been difficult to predict and design the stability of redox‐active molecules to enhance cyclability in a rational manner, in part because the relationship between electronic structure and redox behavior has been neither fully understood nor systematically explored. In this work, rational strategies for exploiting two common principles in organometallic chemistry for enhancing the robustness of pseudo‐octahedral cobalt–polypyridyl complexes are developed. Namely, the spin‐crossover between low and high‐spin states and the chelation effect emerging from replacing three bidentate ligands with two tridentate analogues. Quantum chemical models are used to conceptualize the approach and make predictions that are tested against experiments by preparing prototype Co‐complexes and profiling them as catholytes and anolytes. In good agreement with the conceptual predictions, very stable cycling performance over 600 cycles is found.     

An Advanced Separator for Li–O2 Batteries: Maximizing the Effect of Redox Mediators

Although Li–O₂ batteries are promising next‐generation energy storage systems with superior theoretical capacities, they have a serious limitation regarding the large overpotential upon charging that results from the low conductivity of the discharge product. Thus, various redox mediators (RMs) have been widely studied to reduce the overpotential in the charging process, which should promote the oxidation of Li₂O₂. However, RMs degrade the Li metal anode through a parasitic reaction between the RM and the Li metal, and a solution for this phenomenon is necessary. In this study, an effective method is proposed to prevent the migration of the RM toward the anode side of the lithium using a separator that is modified with a negatively charged polymer. When DMPZ (5,10‐dihydro‐5,10‐dimethylphenazine) is used as an RM, it is found that the modified separator suppresses the migration of DMPZ toward the counter electrode of the Li metal anode. This is investigated by a visual redox couple diffusion test, a morphological investigation, and an X‐ray diffraction study. This advanced separator effectively maximizes the catalytic activity of the redox mediator. Li–O₂ batteries using both a highly concentrated DMPZ and the modified separator exhibit improved performance and maintained 90% round‐trip efficiency up to the 20th cycle.     

Redox Shuttles with Axisymmetric Scaffold for Overcharge Protection of Lithium‐Ion Batteries

The derivatives of 1,4‐dimethoxybenzene are thus far the best performing redox shuttle additives for overcharge protection of Li‐ion batteries. The most durable molecules of this kind typically possess two in‐plane methoxy groups that are equivalent by inversion symmetry. However, such geometry leads to a vanishing average dipole moment that causes poor solubility of these molecules in carbonate‐based electrolytes. In this study, a novel redox shuttle additive, 1,2,3,4‐tetrahydro‐6,7‐dimethoxy‐1,1,4,4‐tetramethyl‐naphthalene (TDTN), is introduced. It has been demonstrated that reversible oxidation at 4.05 V versus Li⁺/Li, high polarity, high solubility (around 0.4 m ), and excellent electrochemical stability (150 overcharge cycles at C/2 rate with 100% overcharge) can all be achieved simultaneously by the imposition of axial symmetry in the corresponding radical cation that is generated by electrochemical oxidation of TDTN in the battery. The intricate interplay between the symmetry and the chemical stability of the radical cation is scrutinized using magnetic resonance spectroscopy and electron structure modeling.     

Twisted Perylene Diimides with Tunable Redox Properties for Organic Sodium‐Ion Batteries

Organic rechargeable batteries gain huge scientific interest owing to the design flexibility and resource renewability of the active materials. However, the low reduction potentials still remain a challenge to compete with the inorganic cathodes. This study demonstrates a simple and efficient approach to tune the redox properties of perylene diimides (PDIs) as high voltage cathodes for organic‐based sodium‐ion batteries (SIBs). With appropriate electron‐withdrawing groups as substituents on perylene diimides, this study shows a remarkable tunability in the discharge potential from 2.1 to 2.6 V versus Na⁺/Na with a sodium intake of ≈1.6 ions per molecule. Further, this study explores tuning the shape of the voltage profiles by systematically tuning the dihedral angle in the perylene ring and demonstrates a single plateau discharge profile for tetrabromo‐substituted perylene diimide (dihedral angles θ₁ & θ₂ = 38°). Detailed structural analysis and electrochemical studies on substituted PDIs unveil the correlation between molecular structure and voltage profile. The results are promising and offer new avenues to tailor the redox properties of organic electrodes, a step closer toward the realization of greener and sustainable electrochemical storage devices.     

Stabilizing Reversible Oxygen Redox Chemistry in Layered Oxides for Sodium‐Ion Batteries

Triggering oxygen‐related activity is demonstrated as a promising strategy to effectively boost energy density of layered cathodes for sodium‐ion batteries. However, irreversible lattice oxygen loss will induce detrimental structure distortion, resulting in voltage decay and cycle degradation. Herein, a layered structure P2‐type Na_0.66Li_0.22Ru_0.78O₂ cathode is designed, delivering reversible oxygen‐related and Ru‐based redox chemistry simultaneously. Benefiting from the combination of strong Ru 4d‐O 2p covalency and stable Li location within the transition metal layer, reversible anionic/cationic redox chemistry is achieved successfully, which is proved by systematic bulk/surface analysis by in/ex situ spectroscopy (operando Raman and hard X‐ray absorption spectroscopy, etc.). Moreover, the robust structure and reversible phase transition evolution revealed by operando X‐ray diffraction further establish a high degree reversible (de)intercalation processes (≈150 mAh g^?1, reversible capacity) and long‐term cycling (average capacity drop of 0.018%, 500 cycles).     

Exfoliated Triazine‐Based Covalent Organic Nanosheets with Multielectron Redox for High‐Performance Lithium Organic Batteries

The development of the next‐generation lithium ion battery requires environmental‐friendly electrode materials with long cycle life and high energy density. Organic compounds are a promising potential source of electrode materials for lithium ion batteries due to their advantages of chemical richness at the molecular level, cost benefit, and environmental friendliness, but they suffer from low capacity and dissatisfactory cycle life mainly due to hydrophobic dissolution in organic electrolytes and poor electronic conductivity. In this work, two types of triazine‐based covalent organic nanosheets (CONs) are exfoliated and composited with carbon nanotubes. The thin‐layered 2D structure for the exfoliated CONs can activate more functional groups for lithium storage and boost the utilization efficiency of redox sites compared to its bulk counterpart. Large reversible capacities of above 1000 mAh g^?1 can be achieved after 250 cycles, which is comparable to high‐capacity inorganic electrodes. Moreover, the lithium‐storage mechanism is determined to be an intriguing 11 and 16 electron redox reaction, associated with the organic groups (unusual triazine ring, piperazine ring, and benzene ring, and common C?N, ? NH? groups).     

Modeling and Simulation of Flow Batteries

Flow batteries have received extensive recognition for large‐scale energy storage such as connection to the electricity grid, due to their intriguing features and advantages including their simple structure and principles, long operation life, fast response, and inbuilt safety. Market penetration of this technology, however, is still hindered by some critical issues such as electroactive species crossover and its corresponding capacity loss, undesirable side reactions, scale‐up and optimization of structural geometries at different scales, and battery operating conditions. Overcoming these remaining challenges requires a comprehensive understanding of the interrelated structural design parameters and the multivariable operations within the battery system. Numerical modeling and simulation are effective tools not only for gaining an understanding of the underlying mechanisms at different spatial and time scales of flow batteries but also for cost‐effective optimization of reaction interfaces, battery components, and the entire system. Here, the research and development progress in modeling and simulation of flow batteries is presented. In addition to the most studied all‐vanadium redox flow batteries, the modelling and simulation efforts made for other types of flow battery are also discussed. Finally, perspectives for future directions on model development for flow batteries, particularly for the ones with limited model‐based studies are highlighted.     

Anthraquinone Derivatives in Aqueous Flow Batteries

Anthraquinone derivatives are being considered for large scale energy storage applications because of their chemical tunability and rapid redox kinetics. The authors investigate four anthraquinone derivatives as negative electrolyte candidates for an aqueous quinone‐bromide redox flow battery: anthraquinone‐2‐sulfonic acid (AQS), 1,8‐dihydroxyanthraquinone‐2,7‐disulfonic acid (DHAQDS), alizarin red S (ARS), and 1,4‐dihydroxyanthraquinone‐2,3‐dimethylsulfonic acid (DHAQDMS). The standard reduction potentials are all lower than that of anthraquinone‐2,7‐disulfonic acid (AQDS), the molecule used in previous quinone‐bromide batteries. DHAQDS and ARS undergo irreversible reactions on contact with bromine, which precludes their use against bromine but not necessarily against other electrolytes. DHAQDMS is apparently unreactive with bromine but cannot be reversibly reduced, whereas AQS is stable against bromine and stable upon reduction. The authors demonstrate an AQS‐bromide flow cell with higher open circuit potential and peak galvanic power density than the equivalent AQDS‐bromide cell. This study demonstrates the use of chemical synthesis to tailor organic molecules for improving flow battery performance.