Graphitic Nanoshell/Mesoporous Carbon Nanohybrids as Highly Efficient and Stable Bifunctional Oxygen Electrocatalysts for Rechargeable Aqueous Na–Air Batteries

Efficient and cost‐effective bifunctional electrocatalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are of vital importance in energy conversion and storage devices. Despite the recent progress in bifunctional oxygen electrocatalysts, their unbalanced and insufficient OER and ORR activities has continued to pose challenges for the practical application of such energy devices. The design of highly integrated, high‐performance, bifunctional oxygen electrocatalysts composed of highly graphitic nanoshells embedded in mesoporous carbon (GNS/MC) is reported. The GNS/MC exhibits very high oxygen electrode activity, which is one of the best performances among nonprecious metal bifunctional oxygen electrocatalysts, and substantially outperforms Ir‐ and Pt‐based catalysts. Moreover, the GNS/MC shows excellent durability for both OER and ORR. In situ X‐ray absorption spectroscopy and square wave voltammetry reveal the roles of residual Ni and Fe entities in enhancing OER and ORR activities. Raman spectra indicate highly graphitic, defect‐rich nature of the GNS/MC, which can contribute to the enhanced OER activity and to high stability for the OER and ORR. In aqueous Na–air battery tests, the GNS/MC air cathode‐based cell exhibits superior performance to Ir/C‐ and Pt/C‐based batteries. Significantly, the GNS/MC‐based cell demonstrates the first example of rechargeable aqueous Na–air battery.     

Regulating the Catalytic Dynamics Through a Crystal Structure Modulation of Bimetallic Catalyst

The surface of solid catalysts is one of the most important factors where the interface with reaction products governs the reaction kinetics. Herein, the crystal phase of palladium–copper nanoparticles (PdCu NPs) is controlled to modulate their surface atomic arrangement, which will govern the growth dynamics of discharge products on their surfaces and thus the catalytic performances in non‐aqueous lithium–oxygen (Li‐O₂) batteries. First‐principles calculations and experimental validations reveal that homogeneous nucleation and distribution of discharge products are observed on the surface of body‐centered cubic PdCu NPs, promoting the oxygen reduction/evolution reaction (ORR/OER) activities in Li‐O₂ batteries. However, the agglomerates formed on the surface of its face‐centered cubic homologue deteriorates ORR/OER activities, which worsen the battery performances. For the first time, this work theoretically and experimentally demonstrates how the crystal phase modulation regulates the nucleation behaviors and growth dynamics of discharge products for ORR/OER.     

NiFe Layered Double Hydroxide Nanoparticles on Co,N‐Codoped Carbon Nanoframes as Efficient Bifunctional Catalysts for Rechargeable Zinc–Air Batteries

The future large‐scale deployment of rechargeable zinc–air batteries requires the development of cheap, stable, and efficient bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). In this work, a highly efficient bifunctional electrocatalyst is prepared by depositing 3–5 nm NiFe layered double hydroxide (NiFe‐LDH) nanoparticles on Co,N‐codoped carbon nanoframes (Co,N‐CNF). The NiFe‐LDH/Co,N‐CNF electrocatalyst displayed an OER overpotential of 0.312 V at 10 mA cm^?2 and an ORR half‐wave potential of 0.790 V. The outstanding performance of the electrocatalyst is attributable to the high electrical conductivity and excellent ORR activity of Co,N‐CNF, together with the strong anchoring of 3–5 nm NiFe‐LDH nanoparticles, which preserves active sites. Inspired by the excellent OER and ORR performance of NiFe‐LDH/Co,N‐CNF, a prototype rechargeable zinc–air battery is developed. The battery exhibited a low discharge–charge voltage gap (1.0 V at 25 mA cm^?2) and long‐term cycling durability (over 80 h), and superior overall performance to a counterpart battery constructed using a mixture of IrO₂ and Pt/C as the cathode. The strategy developed here can easily be adapted to synthesize other bifunctional CNF‐based hybrid electrodes for ORR and OER, providing a practical route to more efficient rechargeable zinc–air batteries.     

Electronic and Defective Engineering of Electrospun CaMnO3 Nanotubes for Enhanced Oxygen Electrocatalysis in Rechargeable Zinc–Air Batteries

Rational design and massive production of bifunctional catalysts with superior oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) activities are essential for developing metal–air batteries and fuel cells. Herein, controllable large‐scale synthesis of sulfur‐doped CaMnO₃ nanotubes is demonstrated via an electrospinning technique followed by calcination and sulfurization treatment. The sulfur doping can not only replace oxygen atoms to increase intrinsic electrical conductivity but also introduce abundant oxygen vacancies to provide enough catalytically active sites, which is further demonstrated by density functional theory calculation. The resulting sulfur‐modified CaMnO₃ (CMO/S) exhibits better electrocatalytic activity for ORR and OER in alkaline solution with higher stability performance than the pristine CMO. These results highlight the importance of sulfur treatment as a facile yet effective strategy to improve the ORR and OER catalytic activity of the pristine CaMnO₃. As a proof‐of‐concept, a rechargeable Zn–air battery using the bifunctional catalyst exhibits a small charge–discharge voltage polarization, and long cycling life. Furthermore, a solid‐state flexible and rechargeable Zn–air battery gives superior discharge–charge performance and remarkable stability. Therefore, the CMO/S nanotubes might be a promising replacement to the Pt‐based electrocatalysts for metal–air batteries and fuel cells.     

Fundamental Understanding and Material Challenges in Rechargeable Nonaqueous Li–O2 Batteries: Recent Progress and Perspective

Energy storage challenges have triggered growing interest in various battery technologies and electrocatalysis. As a particularly promising variety, the Li–O₂ battery with an extremely high energy density is of great significance, offering tremendous opportunities to improve cell performance via understanding catalytic mechanisms and the exploration of new materials. Furthermore, focus on nonaqueous electrolyte‐based Li–O₂ batteries has markedly intensified since there could be a higher probability of commercialization, compared to that of solid‐state or aqueous electrolytes. The recent advancements of the nonaqueous Li–O₂ battery in terms of fundamental understanding and material challenges, including electrolyte stability, water effect, and noncarbon cathode materials are summarized in this review. Further, the current status of water impact on discharge products, possible mechanisms, and parasitic reactions in nonaqueous electrolytes are reviewed for the first time. The key challenges of noncarbon oxygen electrode materials, such as noble metals and metal oxides‐based cathodes, transition metals, transition metal compounds (carbides, oxides) based cathodes as well as noncarbon supported catalysts are discussed. This review concludes with a perspective on future research directions for nonaqueous Li–O₂ batteries.     

Bimetallic Zeolitic Imidazolite Framework Derived Carbon Nanotubes Embedded with Co Nanoparticles for Efficient Bifunctional Oxygen Electrocatalyst

Bifunctional oxygen catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) with high activities and low‐cost are of prime importance and challenging in the development of fuel cells and rechargeable metal–air batteries. This study reports a porous carbon nanomaterial loaded with cobalt nanoparticles (Co@NC‐x/y) derived from pyrolysis of a Co/Zn bimetallic zeolitic imidazolite framework, which exhibits incredibly high activity as bifunctional oxygen catalysts. For instance, the optimal catalyst of Co@NC‐3/1 has the interconnected framework structure between porous carbon and embedded carbon nanotubes, which shows the superb ORR activity with onset potential of ≈1.15 V and half‐wave potential of ≈0.93 V. Moreover, it presents high OER activity that can be further enhanced to over commercial RuO₂ by P‐doped with overpotentials of 1.57 V versus reversible hydrogen electrode at 10 mA cm^?2 and long‐term stability for 2000 circles and a Tafel slope of 85 mV dec^?1. Significantly, the nanomaterial demonstrates better catalytic performance and durability than Pt/C for ORR and commercial RuO₂ and IrO₂ for OER. These findings suggest the importance of a synergistic effect of graphitic carbon, nanotubes, exposed Co–N_x active sites, and interconnected framework structure of various carbons for bifunctional oxygen electrocatalysts.     

Sandwich‐Like Reduced Graphene Oxide/Carbon Black/Amorphous Cobalt Borate Nanocomposites as Bifunctional Cathode Electrocatalyst in Rechargeable Zinc‐Air Batteries

The inhibitively high cost of the noble‐metal‐containing materials has become a major obstacle for the large‐scale application of rechargeable zinc‐air batteries (ZABs). To solve this problem in a practical way, a green and scalable method to prepare sandwich‐like reduced graphene oxide /carbon black/amorphous cobalt borate nanocomposites (rGO/CB/Co‐B_i) is reported. These composites are shown to be a highly efficient and robust bifunctional electrocatalyst for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). In this system, the spontaneous assembly of the GO sheet and CB nanoparticles is demonstrated by noncovalent interactions to build the sandwich‐like structure with hierarchical pore distribution. The impressive ORR and OER activities of the obtained nanocomposite are attributed to the high conductivity, large surface area, and the hierarchically porous channels. With room‐temperature synthesis and significant activities shown in the demonstrative battery test, the prepared nanocomposite can potentially serve as an alternative for noble‐metal‐based rechargeable ZAB cathode materials.     

In Situ Exfoliating and Generating Active Sites on Graphene Nanosheets Strongly Coupled with Carbon Fiber toward Self‐Standing Bifunctional Cathode for Rechargeable Zn–Air Batteries

The self‐standing electrode nanomaterials with highly effective bifunctional electrocatalysis for oxygen reduction and evolution reactions (ORR/OER) are important for practical applications in metal–air batteries. Herein, a defect‐enriched and pyridinic‐N (PN) dominated bifunctional electrocatalyst with novel core–shell architecture (DN‐CP@G) is successfully fabricated by in situ exfoliating graphene from carbon paper followed by high temperature ammonia treatment. Benefitting from its strongly coupled core–shell structure, abundant defective sites and high‐content PN dopants, the DN‐CP@G displays an excellent electrocatalytic (ORR and OER) activity and stability in alkaline media, which are comparable to commercial Pt/C and Ir/C catalysts. The experiment, and theoretical calculations demonstrate that the electrocatalytic activities of carbon materials strongly depend on their defective sites and PN dopants. By directly using DN‐CP@G as a self‐standing electrode, the assembled zinc–air battery demonstrates a high discharge performance and outstanding long‐term cycle stability with at least 250 cycles, which is much superior to the mixed Pt/C and Ir/C electrodes. Remarkably, the DN‐CP@G based all‐solid‐state battery also reveals a good discharge and cycle performance. A facile and cost‐efficient approach to prepare highly effective bifunctional self‐standing electrode is provided by in situ generation of active sites on carbon support for metal–air batteries.     

Novel Route to Fe‐Based Cathode as an Efficient Bifunctional Catalysts for Rechargeable Zn–Air Battery

Efficient bifunctional oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalysts are of great importance for rechargeable metal–air batteries. Herein, FeN_x/C catalysts are synthesized by pyrolysis of thiourea and agarose containing α‐Fe₂O₃ nanoplate as Fe precursor, where α‐Fe₂O₃ nanoplate can prevent the aggregation of carbon sheets to effectively improve the specific surface area during the carbonization process. The FeN_x/C‐700‐20 catalyst displays excellent catalytic performance for both ORR and OER activity in alkaline conditions with more positive onset potential (1.1 V vs the reversible hydrogen electrode) and half‐wave potential, higher stability, and stronger methanol tolerance in alkaline solution, which are all superior to that of the commercial Pt/C catalyst. In this study, the detailed analyses demonstrate that the coexistence of Fe‐based species and high content of Fe‐N_x both play an important role for the catalytic activity. Furthermore, FeN_x/C‐700‐20 as cathode catalyst in Zn–air battery possesses higher charge–discharge stability and power density compared with that of commercial Pt/C catalyst, displaying great potential in practical implementation of for the rechargeable energy devices.     

Defective Carbon–CoP Nanoparticles Hybrids with Interfacial Charges Polarization for Efficient Bifunctional Oxygen Electrocatalysis

The development of efficient catalysts for both oxygen reduction and evolution reactions (oxygen reduction reaction (ORR) and oxygen evolution reaction (OER)) is central to regenerative fuel cells and rechargeable metal–air batteries. It is highly desirable to achieve the efficient integration of dual active components into the catalysts and to understand the interaction between the dual components. Here, a facile approach is demonstrated to construct defective carbon–CoP nanoparticle hybrids as bifunctional oxygen electrocatalysts, and further probe the interfacial charge distribution behavior. By combining multiple synchrotron‐based X‐ray spectroscopic characterizations with density functional theory calculations, the interfacial charge polarization with the electrons gathering at the defective carbon surface and the holes gathering at the CoP surface due to strong interfacial coupling is revealed, which simultaneously facilitates the ORR and OER with remarkable bifunctional oxygen electrode activities. This work not only offers a bifunctional oxygen catalyst with outstanding performance, but also unravels the promoting factor of the hybrids from the view of interfacial charge distribution.     

Highly Active and Stable Graphene Tubes Decorated with FeCoNi Alloy Nanoparticles via a Template‐Free Graphitization for Bifunctional Oxygen Reduction and Evolution

Development of highly active and stable bifunctional oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalysts from earth‐abundant elements remains a grand challenge for highly demanded reversible fuel cells and metal–air batteries. Carbon catalysts have many advantages over others due to their low cost, excellent electrical conductivity, high surface area, and easy functionalization. However, they typically cannot withstand the highly oxidative OER environment. Here, a new class of bifunctional electrocatalyst is reported, consisting of ultralarge sized nitrogen doped graphene tubes (N‐GTs) (>500 nm) decorated with FeCoNi alloy particles. These tubes are prepared from an inexpensive precursor, dicyandiamide, via a template‐free graphitization process. The ORR/OER activity and the stability of these graphene tube catalysts depend strongly on the transition metal precursors. The best performing FeCoNi‐derived N‐GT catalyst exhibits excellent ORR and OER activity along with adequate electrochemical durability over a wide potential window (0–1.9 V) in alkaline media. The measured OER current is solely due to desirable O₂ evolution, rather than carbon oxidation. Extensive electrochemical and physical characterization indicated that high graphitization degree, thicker tube walls, proper nitrogen doping, and presence of FeCoNi alloy particles are vital for high bifunctional activity and electrochemical durability of tubular carbon catalysts.     

Tunable Internal and Surface Structures of the Bifunctional Oxygen Perovskite Catalysts

Perovskite oxide ceramics attracts significant attention as a strong candidate of bifunctional oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) electrocatalyst for the metal‐air batteries. Numerous approaches to the viability of bifunctional perovskite electrocatalyst represent that the electro­chemical performance is highly correlated with defect chemistry, surface structure, and overall polycrystalline perovskite structure. By making use of the intrinsic flexibility of internal structure and high nonstoichiometry in perovskite oxide, the heat treatment effect of the complex Ba_0.5Sr_0.5Co_xFe_1‐xO_3‐δ (x = 0.2 and 0.8) perovskites in argon atmosphere at 950 °C (Ar‐BSCF5582 and Ar‐BSCF5528) on the surface structure/defect chemistry and electrocatalytic performance is intensively investigated. Upon heat‐treatment in argon atmosphere, the amorphous thickness layer increases from ≈20 to 180–200 nm in BSCF5582, while there is little change in BSCF5528 with ≈20 nm. The electrocatalytic performance of BSCF5582 catalyst both in ORR and OER deteriorates seriously, while Ar‐BSCF5528 demonstrates a significant increase of electro­chemical performance in ORR. This study demonstrates that the electrochemical performances of a perovskite catalyst can be significantly determined by the simultaneous modification of both surface structure and internal defect chemistry, which are explained with transmission electron microscopy and atomic‐selective X‐ray absorption fine structure analyses, respectively.     

Graphitic‐Shell Encapsulation of Metal Electrocatalysts for Oxygen Evolution,Oxygen Reduction,and Hydrogen Evolution in Alkaline Solution

Developing highly efficient, cost effective, and environmentally friendly electrocatalysts for the oxygen evolution reaction (OER), oxygen reduction reaction (ORR), and hydrogen evolution reaction (HER) is of interest for sustainable and clean energy technologies, including metal–air batteries and fuel cells. In this work, the screening of electrocatalytic activities of a series of single metallic iron, cobalt, and nickel nanoparticles and their binary and ternary alloys encapsulated in a graphitic carbon shell toward the OER, ORR, and HER in alkaline media is reported. Synthesis of these compounds proceeds by a two‐step sol–gel and carbothermal reduction procedure. Various ex situ characterizations show that with harsh electrochemical activation, the graphitic shell undergoes an electrochemical exfoliation. The modified electronic properties of the remaining graphene layers prevent their exfoliation, protect the bulk of the metallic cores, and participate in the electrocatalysis. The amount of near‐surface, higher‐oxidation‐state metals in the as‐prepared samples increases with electrochemical cycling, indicating that some metallic nanoparticles are not adequately encased within the graphite shell. Such surface oxide species provide secondary active sites for the electrocatalytic activities. The Ni–Fe binary system gives the most promising results for the OER, and the Co–Fe binary system shows the most promise for the ORR and HER.     

An Open‐Structured Matrix as Oxygen Cathode with High Catalytic Activity and Large Li2O2 Accommodations for Lithium–Oxygen Batteries

The nonaqueous lithium–oxygen (Li–O₂) battery is considered as one of the most promising candidates for next‐generation energy storage systems because of its very high theoretical energy density. However, its development is severely hindered by large overpotential and limited capacity, far less than theory, caused by sluggish oxygen redox kinetics, pore clogging by solid Li₂O₂ deposition, inferior Li₂O₂/cathode contact interface, and difficult oxygen transport. Herein, an open‐structured Co₉S₈ matrix with sisal morphology is reported for the first time as an oxygen cathode for Li–O₂ batteries, in which the catalyzing for oxygen redox, good Li₂O₂/cathode contact interface, favorable oxygen evolution, and a promising Li₂O₂ storage matrix are successfully achieved simultaneously, leading to a significant improvement in the electrochemical performance of Li–O₂ batteries. The intrinsic oxygen‐affinity revealed by density functional theory calculations and superior bifunctional catalytic properties of Co₉S₈ electrode are found to play an important role in the remarkable enhancement in specific capacity and round‐trip efficiency for Li–O₂ batteries. As expected, the Co₉S₈ electrode can deliver a high discharge capacity of ≈6875 mA h g^?1 at 50 mA g^?1 and exhibit a low overpotential of 0.57 V under a cutoff capacity of 1000 mA h g^?1, outperforming most of the current metal‐oxide‐based cathodes.     

Narrowing the Gap between Theoretical and Practical Capacities in Li‐Ion Layered Oxide Cathode Materials

Although layered lithium oxides have become the cathode of choice for state‐of‐the‐art Li‐ion batteries, substantial gaps remain between the practical and theoretical energy densities. With the aim of supporting efforts to close this gap, this work reviews the fundamental operating mechanisms and challenges of Li intercalation in layered oxides, contrasts how these challenges play out differently for different materials (with emphasis on Ni–Co–Al (NCA) and Ni–Mn–Co (NMC) alloys), and summarizes the extensive corpus of modifications and extensions to the layered lithium oxides. Particular emphasis is given to the fundamental mechanisms behind the operation and degradation of layered intercalation electrode materials as well as novel modifications and extensions, including Na‐ion and cation‐disordered materials.     

Efficiently Enhancing Oxygen Reduction Electrocatalytic Activity of MnO2 Using Facile Hydrogenation

Improving the electrocatalytic oxygen reduction reaction (ORR) activity of transition metal oxides is important for the development of non‐noble metal catalysts that are used in metal‐air batteries and fuel cells. Here, a novel facile strategy of hydrogenation to significantly enhance the ORR performance of MnO₂. The hydrogenated MnO₂ (H‐MnO₂), which is prepared through a simple heat treatment in hydrogen gas, shows characteristics of modified lattice/surface structures and increased electrical conductivity. In 0.1 M KOH aqueous solution, the prepared H‐MnO₂ exhibits high activity toward the oxygen electrocatalysis with more positive onset potential (≈60 mV), ≈14% larger of limiting current, lower yield of peroxide species, and better durability than the pristine oxide. Further conductivity testing and density functional theory (DFT) studies reveal the faster kinetics of ORR after hydrogenation is due to the formation of hydrogen bonds and altered microstructure and improved electronic properties. These results highlight the importance of hydrogenation as a facile yet effective strategy to improve the catalytic activity of transition metal oxides for ORR‐based applications.     

An Antiaging Electrolyte Additive for High‐Energy‐Density Lithium‐Ion Batteries

High‐capacity Li‐rich layered oxide cathodes along with Si‐incorporated graphite anodes have high reversible capacity, outperforming the electrode materials used in existing commercial products. Hence, they are potential candidates for the development of high‐energy‐density lithium‐ion batteries (LIBs). However, structural degradation induced by loss of interfacial stability is a roadblock to their practical use. Here, the use of malonic acid‐decorated fullerene (MA‐C₆₀) with superoxide dismutase activity and water scavenging capability as an electrolyte additive to overcome the structural instability of high‐capacity electrodes that hampers the battery quality is reported. Deactivation of PF₅ by water scavenging leads to the long‐term stability of the interfacial structures of electrodes. Moreover, an MA‐C₆₀‐added electrolyte deactivates the reactive oxygen species and constructs an electrochemically robust cathode‐electrolyte interface for Li‐rich cathodes. This work paves the way for new possibilities in the design of electrolyte additives by eliminating undesirable reactive substances and tuning the interfacial structures of high‐capacity electrodes in LIBs.     

Apically Dominant Mechanism for Improving Catalytic Activities of N‐Doped Carbon Nanotube Arrays in Rechargeable Zinc–Air Battery

The oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) in zinc–air batteries (ZABs) require highly efficient, cost‐effective, and stable electrocatalysts as alternatives to high cost and low poison resistant platinum group metals (PGM) catalysts. Although nitrogen‐doped carbon nanotube (NCNT) arrays are now capable of catalyzing ORR efficiently, their hydrophobic surface and base‐growth mode are found to limit the catalytic performance in the practical ZABs. Here, the concept of an apically dominant mechanism in improving the catalytic performance of NCNT by precisely encapsulating CoNi nanoparticles (NPs) within the apical domain of NCNT on the Ni foam (denoted as CoNi@NCNT/NF) is demonstrated. The CoNi@NCNT/NF exhibits a more excellent catalytic performance toward both ORR and OER than that of traditional NCNT derived from the base‐growth method. The ZAB coin cell using CoNi@NCNT/NF as an air electrode shows a peak power density of 127 mW cm^?2 with an energy density of 845 Wh kg_Zn^?1 and rechargeability over 90 h, which outperforms the performance of PGM catalysts. Density functional theory calculations reveal that the ORR catalytic performance of the CoNi@NCNT/NF is mainly attributed to the synergetic contributions from NCNT and the apical active sites on NCNT near to CoNi NPs.     

Structure Design and Composition Engineering of Carbon‐Based Nanomaterials for Lithium Energy Storage

Carbon‐based nanomaterials have significantly pushed the boundary of electrochemical performance of lithium‐based batteries (LBs) thanks to their excellent conductivity, high specific surface area, controllable morphology, and intrinsic stability. Complementary to these inherent properties, various synthetic techniques have been adopted to prepare carbon‐based nanomaterials with diverse structures and different dimensionalities including 1D nanotubes and nanorods, 2D nanosheets and films, and 3D hierarchical architectures, which have been extensively applied as high‐performance electrode materials for energy storage and conversion. The present review aims to outline the structural design and composition engineering of carbon‐based nanomaterials as high‐performance electrodes of LBs including lithium‐ion batteries, lithium–sulfur batteries, and lithium–oxygen batteries. This review mainly focuses on the boosting of electrochemical performance of LBs by rational dimensional design and porous tailoring of advanced carbon‐based nanomaterials. Particular attention is also paid to integrating active materials into the carbon‐based nanomaterials, and the structure–performance relationship is also systematically discussed. The developmental trends and critical challenges in related fields are summarized, which may inspire more ideas for the design of advanced carbon‐based nanostructures with superior properties.