Surface Engineering Strategies of Layered LiCoO2 Cathode Material to Realize High‐Energy and High‐Voltage Li‐Ion Cells

Battery industries and research groups are further investigating LiCoO₂ to unravel the capacity at high‐voltages (>4.3 vs Li). The research trends are towards the surface modification of the LiCoO₂ and stabilize it structurally and chemically. In this report, the recent progress in the surface‐coating materials i.e., single‐element, binary, and ternary hybrid‐materials etc. and their coating methods are illustrated. Further, the importance of evaluating the surface‐coated LiCoO₂ in the Li‐ion full‐cell is highlighted with our recent results. Mg,P‐coated LiCoO₂ full‐cells exhibit excellent thermal stability, high‐temperature cycle and room‐temperature rate capabilities with high energy‐density of ≈1.4 W h cc^?1 at 10 C and 4.35 V. Besides, pouch‐type full‐cells with high‐loading (18 mg cm^?2) electrodes of layered‐Li(Ni,Mn)O₂ ‐coated LiCoO₂ not only deliver prolonged cycle‐life at room and elevated‐temperatures but also high energy‐density of ≈2 W h cc^?1 after 100 cycles at 25 °C and 4.47 V (vs natural graphite). The post‐mortem analyses and experimental results suggest enhanced electrochemical performances are attributed to the mechanistic behaviour of hybrid surface‐coating layers that can mitigate undesirable side reactions and micro‐crack formations on the surface of LiCoO₂ at the adverse conditions. Hence, the surface‐engineering of electrode materials could be a viable path to achieve the high‐energy Li‐ion cells for future applications.     

High‐Quality Graphene Microflower Design for High‐Performance Li–S and Al‐Ion Batteries

Poor quality and insufficient productivity are two main obstacles for the practical application of graphene in electrochemical energy storage. Here, high‐quality crumpled graphene microflower (GmF) for high‐performance electrodes is designed. The GmF possesses four advantages simultaneously: highly crystallized defect‐free graphene layers, low stacking degree, sub‐millimeter continuous surface, and large productivity with low cost. When utilized as carbon host for sulfur cathode, the GmF‐sulfur hybrid delivers decent areal capacities of 5.2 mAh cm^?2 at 0.1 C and 3.8 mAh cm^?2 at 0.5 C. When utilized as cathode of Al‐ion battery, the GmF affords a high capacity of 100 mAh g^?1 with 100% capacity retention after 5000 cycles and excellent rate capability from 0.1 to 20 A g^?1. This facile and large‐scale producible GmF represents a meaningful high‐quality graphene powder for practical energy storage technology. Meanwhile, this unique high‐quality graphene design provides an effective route to improve electrochemical properties of graphene‐based electrodes.     

A New Spinel‐Layered Li‐Rich Microsphere as a High‐Rate Cathode Material for Li‐Ion Batteries

Li‐rich layered materials are considered to be the promising low‐cost cathodes for lithium‐ion batteries but they suffer from poor rate capability despite of efforts toward surface coating or foreign dopings. Here, spinel‐layered Li‐rich Li‐Mn‐Co‐O microspheres are reported as a new high‐rate cathode material for Li‐ion batteries. The synthetic procedure is relatively simple, involving the formation of uniform carbonate precursor under solvothermal conditions and its subsequent transformation to an assembled microsphere that integrates a spinel‐like component with a layered component by a heat treatment. When calcined at 700 °C, the amount of transition metal Mn and Co in the Li‐Mn‐Co‐O microspheres maintained is similar to at 800 °C, while the structures of constituent particles partially transform from 2D to 3D channels. As a consequence, when tested as a cathode for lithium‐ion batteries, the spinel‐layered Li‐rich Li‐Mn‐Co‐O microspheres obtained at 700 °C show a maximum discharge capacity of 185.1 mA h g^?1 at a very high current density of 1200 mA g^?1 between 2.0 and 4.6 V. Such a capacity is among the highest reported to date at high charge‐discharge rates. Therefore, the present spinel‐layered Li‐rich Li‐Mn‐Co‐O microspheres represent an attractive alternative to high‐rate electrode materials for lithium‐ion batteries.     

Li2O:Li–Mn–O Disordered Rock‐Salt Nanocomposites as Cathode Prelithiation Additives for High‐Energy Density Li‐Ion Batteries

The irreversible loss of lithium from the cathode material during the first cycles of rechargeable Li‐ion batteries notably reduces the overall cell capacity. Here, a new family of sacrificial cathode additives based on Li₂O:Li_2/3Mn_1/3O_5/6 composites synthesized by mechanochemical alloying is reported. These nanocomposites display record (but irreversible) capacities within the Li–Mn–O systems studied, of up to 1157 mAh g^?1, which represents an increase of over 300% of the originally reported capacity in Li_2/3Mn_1/3O_5/6 disordered rock salts. Such a high irreversible capacity is achieved by the reaction between Li₂O and Li_2/3Mn_1/3O_5/6 during the first charge, where electrochemically active Li₂O acts as a Li⁺ donor. A 13% increase of the LiFePO₄ and LiCoO₂ first charge gravimetric capacities is demonstrated by the addition of only 2 wt% of the nanosized composite in the cathode mixture. This result shows the great potential of these newly discovered sacrificial additives to counteract initial losses of Li⁺ ions and improve battery performance.     

High‐Energy Density Li‐Ion Capacitor with Layered SnS2/Reduced Graphene Oxide Anode and BCN Nanosheet Cathode

Lithium‐ion capacitors (LICs) with capacitor‐type cathodes and battery‐type anodes are considered a promising next‐generation advanced energy storages system that meet the requirements of high energy density and power density. However, the mismatch of charge‐storage capacity and electrode kinetics between positive and negative electrodes remains a challenge. Herein, layered SnS₂/reduced graphene oxide (RGO) nanocomposites are developed for negative electrodes and a 2D B/N codoped carbon (BCN) nanosheet is designed for the positive electrode. The SnS₂/RGO derived from SnS₂‐bonded RGO of high conductivity exhibits a capacity of 1198 mA h g^?1 at 100 mA g^?1. Boron and nitrogen atoms in BCN are found to promote adsorption of anions, which enhance the pseudocapacitive contribution as well as expanding the voltage of LICs. A quantitative kinetics analysis indicates that the SnS₂/RGO electrodes with a dominating capacitive mechanism and a diminished intercalation process, benefit the kinetic balance between the two electrodes. With this particular structure, the LIC is able to operate at the highest operating voltage for these devices recorded to date (4.5 V), exhibiting an energy density of 149.5 W h kg^?1, a power density of 35 kW kg^?1, and a capacity retention ratio of 90% after 10 000 cycles.     

Surface Pseudocapacitive Mechanism of Molybdenum Phosphide for High‐Energy and High‐Power Sodium‐Ion Capacitors

Sodium‐based energy storage technologies are potential candidates for large‐scale grid applications owing to the earth abundance and low cost of sodium resources. Transition metal phosphides, e.g. MoP, are promising anode materials for sodium‐ion storage, while their detailed reaction mechanisms remain largely unexplored. Herein, the sodium‐ion storage mechanism of hexagonal MoP is systematically investigated through experimental characterizations, density functional theory calculations, and kinetics analysis. Briefly, it is found that the naturally covered surface amorphous molybdenum oxides layers on the MoP grains undergo a faradaic redox reaction during sodiation and desodiation, while the inner crystalline MoP remains unchanged. Remarkably, the MoP anode exhibits a pseudocapacitive‐dominated behavior, enabling the high‐rate sodium storage performance. By coupling the pseudocapacitive anode with a high‐rate‐battery‐type Na₃V₂O₂(PO₄)₂F@rGO cathode, a novel sodium‐ion full cell delivers a high energy density of 157 Wh kg^?1 at 97 W kg^?1 and even 52 Wh kg^?1 at 9316 W kg^?1. These findings present the deep understanding of the sodium‐ion storage mechanism in hexagonal MoP and offer a potential route for the design of high‐rate sodium‐ion storage materials and devices.     

A High‐Energy NASICON‐Type Cathode Material for Na‐Ion Batteries

Over the last decade, Na‐ion batteries have been extensively studied as low‐cost alternatives to Li‐ion batteries for large‐scale grid storage applications; however, the development of high‐energy positive electrodes remains a major challenge. Materials with a polyanionic framework, such as Na superionic conductor (NASICON)‐structured cathodes with formula Na_xM₂(PO₄)₃, have attracted considerable attention because of their stable 3D crystal structure and high operating potential. Herein, a novel NASICON‐type compound, Na₄MnCr(PO₄)₃, is reported as a promising cathode material for Na‐ion batteries that deliver a high specific capacity of 130 mAh g^?1 during discharge utilizing high‐voltage Mn^2+/3+ (3.5 V), Mn^3+/4+ (4.0 V), and Cr^3+/4+ (4.35 V) transition metal redox. In addition, Na₄MnCr(PO₄)₃ exhibits a high rate capability (97 mAh g^?1 at 5 C) and excellent all‐temperature performance. In situ X‐ray diffraction and synchrotron X‐ray diffraction analyses reveal reversible structural evolution for both charge and discharge.     

Surface Mn Oxidation State Controlled Spinel LiMn2O4 as a Cathode Material for High‐Energy Li‐Ion Batteries

Spinel lithium manganese oxide (LiMn₂O₄) has attracted much attention as a promising cathode material for large‐scale lithium ion batteries. However, its continuous capacity fading at elevated temperature is an obstacle to extended cycling in large‐scale applications. Here, surface Mn oxidation state controlled LiMn₂O₄ is synthesized by coating stoichiometric LiMn₂O₄ with a cobalt‐substituted spinel, for which stoichiometric LiMn₂O₄ is used as the starting material and onto which a Li_xMn_yCo_zO₄ layer is coated from an acetate‐based precursor solution. In the coated material, the concentrations of both cobalt and Mn⁴⁺ ions vary from the surface to the core. the former without any lattice mismatch between the coating layer and host material. Cycle tests are performed under severe conditions, namely, high temperature and intermittent high current load. During the first discharge cycle at 7 C and 60 °C, a high energy and power density are measured for the coated material, 419 and 3.16 Wh kg^?1, respectively, compared with 343 and 3.03 Wh kg^?1, respectively, for the bare material. After 65 cycles under severe conditions, the coated material retains 82% and ≈100% of the initial energy and power density, respectively, whereas the bare material retains only ≈68% and ≈97% thereof.     

Anatase TiO2 Confined in Carbon Nanopores for High‐Energy Li‐Ion Hybrid Supercapacitors Operating at High Rates and Subzero Temperatures

Li‐ion hybrid supercapacitors (Li‐HSCs) hold great promise in future electrical energy storage due to their relatively high power and energy density. However, a major challenge lies in the slow kinetics of Li‐ion intercalation/extraction within metal‐oxide electrodes. Here, it is shown that ultrafast charge storage is realized by confining anatase TiO₂ nanoparticles in carbon nanopores to enable a high‐rate anode for Li‐HSCs. The porous carbon with interconnected pore walls and open channels not only works as a conductive host to protect TiO₂ from structural degradation but also provides fast pathways for ion/electron transport. As a result, the assembled cells exhibit remarkable rate capabilities with a specific capacity of ≈140 mAh g^?1 at a slow charge and ≈60 mAh g^?1 at a 3.5 s fast charge. While the charge/discharge process can be completed as fast as that of state‐of‐the‐art electrical double‐layer capacitors (EDLCs), the produced nanocomposites show three to seven times higher volumetric capacitance than activated carbons used in commercial EDLCs with acetonitrile‐based electrolytes. Equally important for some applications in cold climates or the space, the Li‐HSCs can operate at subzero temperatures as low as ?40 °C, which is likely only limited by thermal properties of the acetonitrile (melting point of ?45 °C).     

Computational Design and Preparation of Cation‐Disordered Oxides for High‐Energy‐Density Li‐Ion Batteries

Cation‐disordered lithium‐excess metal oxides have recently emerged as a promising new class of high‐energy‐density cathode materials for Li‐ion batteries, but the exploration of disordered materials has been hampered by their vast and unexplored composition space. This study proposes a practical methodology for the identification of stable cation‐disordered rocksalts. Here, it is established that the efficient method, which makes use of special quasirandom structures, correctly predicts cation‐ordering strengths in agreement with accurate Monte‐Carlo simulations and experimental observations. By applying the approach to the composition space of ternary oxides with formula unit LiA_0.5B_0.5O₂ (A, B: transition metals), this study discovers a previously unknown cation‐disordered structure, LiCo_0.5Zr_0.5O₂, that may function as the basis for a new class of cation‐disordered cathode materials. This computational prediction is confirmed experimentally by solid‐state synthesis and subsequent characterization by powder X‐ray diffraction demonstrating the potential of the computational screening of large composition spaces for accelerating materials discovery.     

High Energy Density Aqueous Li‐Ion Flow Capacitor

High energy density Li‐ion hybrid flow capacitors are demonstrated by employing LiMn₂O₄ and activated carbon slurry electrodes. Compared to the existing aqueous flow electrochemical capacitors, the hybrid one exhibits much higher energy densities due to the introduction of high capacity Li‐insertion materials (e.g., LiMn₂O₄ in the present work) as the flowable electrode with asymmetrical cell configuration. A record energy density, i.e., 23.4 W h kg^?1 at a power of 50.0 W kg^?1 has been achieved for aqueous flow capacitors tested at static condition reported to date. A full operational Li‐ion flow capacitor tested in an intermittent‐flow mode has also been demonstrated. The Li‐ion hybrid flow capacitor shows great promise for high‐rate grid applications.     

High‐Throughput Computational Screening of New Li‐Ion Battery Anode Materials

We use density functional theory (DFT) in conjunction with grand canonical linear programming (GCLP), a powerful automated tool for analyzing ground state thermodynamics, to exhaustively enumerate the 515 thermodynamically stable lithiation reactions of transition metal silicides, stannides and phosphides, and compute cell potential, volume expansion, and capacity for each. These reactions comprise an exhaustive list of all possible thermodynamically stable ternary conversion reactions for these transition metal compounds. The reactions are calculated based on a library DFT energies of 291 compounds, including all transition metal silicides, phosphides and stannides found in the Inorganic Crystal Structure Database (ICSD). We screen our computational database for the most appealing anode properties based on gravimetric capacity, volumetric capacity, cell potential, and volume expansion when compared with graphitic carbon anodes. This high‐throughput computational approach points towards several promising anode compositions with properties significantly superior to graphitic carbon, including CoSi₂, TiP and NiSi₂.     

Ti‐Gradient Doping to Stabilize Layered Surface Structure for High Performance High‐Ni Oxide Cathode of Li‐Ion Battery

High‐Ni layered oxide cathodes are considered to be one of the most promising cathodes for high‐energy‐density lithium‐ion batteries due to their high capacity and low cost. However, surfice residues, such as NiO‐type rock‐salt phase and Li₂CO₃, are often formed at the particle surface due to the high reactivity of Ni³⁺, and inevitably result in an inferior electrochemical performance, hindering the practical application. Herein, unprecedentedly clean surfaces without any surfice residues are obtained in a representative LiNi_0.8Co_0.2O₂ cathode by Ti‐gradient doping. High‐resolution transmission electron microscopy (TEM) reveals that the particle surface is composed of a disordered layered phase (≈6 nm in thickness) with the same rhombohedra structure as its interior. The formation of this disordered layered phase at the particle surface is electrochemically favored. It leads to the highest rate capacity ever reported and a superior cycling stability. First‐principles calculations further confirm that the excellent electrochemical performance has roots in the excellent chemical/structural stability of such a disordered layered structure, mainly arising from the improved robustness of the oxygen framework by Ti doping. This strategy of constructing the disordered layered phase at the particle surface could be extended to other high‐Ni layered transition metal oxides, which will contribute to the enhancement of their electrochemical performance.     

Synthesis and Characterization of High‐Energy,High‐Power Spinel‐Layered Composite Cathode Materials for Lithium‐Ion Batteries

Spinel‐layered composites, where a high‐voltage spinel is incorporated in a layered lithium‐rich (Li‐rich) cathode material with a nominal composition x{0.6Li₂MnO₃ · 0.4[LiCo_0.333Mn_0.333Ni_0.333]O₂} · (1 – x) Li[Ni_0.5Mn_1.5]O₄ (x = 0, 0.3, 0.5, 0.7, 1) are synthesized via a hydroxide assisted coprecipitation route to generate high‐energy, high‐power cathode materials for Li‐ion batteries. X‐ray diffraction patterns and the cyclic voltammetry investigations confirm the presence of both the parent components in the composites. The electrochemical investigations performed within a wide potential window show an increased structural stability of the spinel component when incorporated into the composite environment. All the composite materials exhibit initial discharge capacities >200 mAh g^–1. The compositions with x = 0.5 and 0.7 show excellent cycling stability among the investigated materials. Moreover, the first cycle Coulombic efficiency achieve a dramatic improvement with the incorporation of the spinel component. More notably, the composite materials with increased spinel component exhibit superior rate capability compared with the parent Li‐rich material especially together with the highest capacity retention for x = 0.5 composition, making this as the optimal high‐energy high‐power material. The mechanisms involved in the symbiotic relationship of the spinel and layered Li‐rich components in the above composites are discussed.     

Extremely High Yield Conversion from Low‐Cost Sand to High‐Capacity Si Electrodes for Li‐Ion Batteries

Although magnesiothermic reduction has attracted immense attention as a facile route for the fabrication of mass‐scale Si nanostructures for high‐capacity lithium‐ion battery applications, its low conversion yield (<50%) and the discovery of a sustainable and low‐cost precursor remain challenging. Here, an unprecedentedly high final conversion yield (>98%) of magnesiothermic reduction based on control of reaction pressure is reported. The successful use of sand as a nearly infinite and extremely low‐cost source for the high‐yield fabrication of nanostructured Si electrodes for Li‐ion batteries is demonstrated. On the basis of a step‐by‐step analysis of the material's structural, morphological, and compositional changes, a two‐step conversion reaction mechanism is proposed that can clearly explain the phase behavior and the high conversion yield. The excellent charge–discharge performance (specific capacities over 1500 mAh g^‐1 for 100 cycles) of the hierarchical Si nanostructure suggests that this facile, fast, and high‐efficiency synthesis strategy from ultralow‐cost sand particles provides outstanding cost‐effectiveness and possible scalability for the commercialization of Si electrodes for energy‐storage applications.     

Exploiting High‐Performance Anode through Tuning the Character of Chemical Bonds for Li‐Ion Batteries and Capacitors

A high‐performance anode material, MnNCN, is synthesized through a facile and low‐cost method. The relationship between electrochemical properties and chemical composition is explored on the scientific considerations that can provide an insight on designing expected materials. MnNCN with the long bonding length of 2.262 Å in Mn? N and weak electronegativity of 3.04 Pauling units in N leads to a lower charge/discharge potential than that of MnO owing to the character of chemical bonds transformed to covalent dominating from ionic dominating in MnO. Covalent character increases the ratio of sharing electrons that decreases the migration energy of electrons in electrochemical reaction, which enhances the reactive reversibility and stability of electrode material. MnNCN delivered a reversibly specific capacity of 385 mA h g^?1 at 5 A g^?1 in a Li‐ion half cell. Besides, a Li‐ion hybrid capacitor with a high voltage of 4 V presents energy and power densities of respective 103 Wh kg^?1 and 8533 W kg^?1 and cycles at 5 A g^?1 without detectable degradation after 5000 cycles.