Lithium‐Pretreated Hard Carbon as High‐Performance Sodium‐Ion Battery Anodes

Hard carbon (HC) is the state‐of‐the‐art anode material for sodium‐ion batteries (SIBs). However, its performance has been plagued by the limited initial Coulombic efficiency (ICE) and mediocre rate performance. Here, experimental and theoretical studies are combined to demonstrate the application of lithium‐pretreated HC (LPHC) as high‐performance anode materials for SIBs by manipulating the solid electrolyte interphase in tetraglyme (TEGDME)‐based electrolyte. The LPHC in TEGDME can 1) deliver > 92% ICE and ≈220 mAh g^?1 specific capacity, twice of the capacity (≈100 mAh g^?1) in carbonate electrolyte; 2) achieve > 85% capacity retention over 1000 cycles at 1000 mA g^?1 current density (4 C rate, 1 C = 250 mA g^?1) with a specific capacity of ≈150 mAh g^?1, ≈15 times of the capacity (10 mAh g^?1) in carbonate. The full cell of Na₃V₂(PO₄)₃‐LPHC in TEGDME demonstrated close to theoretical specific capacity of ≈98 mAh g^?1 based on Na₃V₂(PO₄)₃ cathode, ≈2.5 times of the value (≈40 mAh g^?1) with nontreated HC. This work provides new perception on the anode development for SIBs.     

Nitrogen Doped/Carbon Tuning Yolk‐Like TiO2 and Its Remarkable Impact on Sodium Storage Performances

Yolk‐like TiO₂ are prepared through an asymmetric Ostwald ripening, which is simultaneously doped by nitrogen and wrapped by carbon from core to shell. It presents a high specific surface area (144.9 m² g^?1), well‐defined yolk‐like structure (600–700 nm), covered with interweaved nanosheets (3–5 nm) and tailored porosity (5–10 nm) configuration. When first utilized as anode material for sodium‐ion batteries (SIBs), it delivers a high reversible specific capacity of 242.7 mA h g^?1 at 0.5 C and maintains a considerable capacity of 115.9 mA h g^?1 especially at rate 20 C. Moreover, the reversible capacity can still reach 200.7 mA h g^?1 after 550 cycles with full capacity retention at 1 C. Even cycled at extremely high rate 25 C, the capacity retention of 95.5% after 3000 cycles is acquired. Notably, an ultrahigh initial coulombic efficiency of 59.1% is achieved. The incorporation of nitrogen with narrowing the band gap accompanied with carbon uniformly coating from core to shell make the NC TiO₂‐Y favor a bulk type conductor, resulting in fast electron transfer, which is beneficial to long‐term cycling stability and remarkable rate capability. It is of great significance to improve the energy‐storage properties through development of the bulk type conductor as anode materials in SIBs.     

A High‐Rate and Ultrastable Sodium Ion Anode Based on a Novel Sn4P3‐P@Graphene Nanocomposite

Phosphorus and tin phosphide based materials that are extensively researched as the anode for Na‐ion batteries mostly involve complexly synthesized and sophisticated nanocomposites limiting their commercial viability. This work reports a Sn₄P₃‐P (Sn:P = 1:3) @graphene nanocomposite synthesized with a novel and facile mechanochemical method, which exhibits unrivalled high‐rate capacity retentions of >550 and 371 mA h g^?1 at 1 and 2 A g^?1, respectively, over 1000 cycles and achieves excellent rate capability (>815, ≈585 and ≈315 mA h g^?1 at 0.1, 2, and 10 A g^?1, respectively).     

Uniform Pomegranate‐Like Nanoclusters Organized by Ultrafine Transition Metal Oxide@Nitrogen‐Doped Carbon Subunits with Enhanced Lithium Storage Properties

Uniform pomegranate‐like nanoclusters (NCs) organized by ultrafine transition metal oxide@nitrogen‐doped carbon (TMO@N–C) subunits (diameter ≈ 4 nm) are prepared on a large scale for the first time through a facile, novel, and one‐pot approach. Taking pomegranate‐like Fe₃O₄@N–C NCs as an example, this unique structure provides short Li⁺/electron diffusion pathways for electrochemical reactions, structural stability during cycling, and high electrical conductivity, leading to superior electrochemical performance. The resulting pomegranate‐like Fe₃O₄@N–C NCs possess a high specific capacity (1204.3 mA h g^?1 at 0.5 A g^?1 over 100 cycles), a stable cycle life (1063.0 mA h g^?1 at 1 A g^?1, 98.4% retention after 1000 cycles), and excellent rate capacities (606.0 mA h g^?1 at 10 A g^?1, 92.0% retention; 417.1 mA h g^?1 at 20 A g^?1, 91.7% retention after 1000 cycles).     

MnMoO4 Electrocatalysts for Superior Long‐Life and High‐Rate Lithium‐Oxygen Batteries

Lithium‐oxygen batteries represent a significant scientific challenge for high‐rate and long‐term cycling using oxygen electrodes that contain efficient electrocatalysts. The mixed transition metal oxide catalysts provide the most efficient catalytic activity for partial heterogeneous surface cations with oxygen vacancies as the active phase. They include multiple oxidation states and oxygen vacancies. Here, using a combination of transmission electron microscopy, differential electrochemical mass spectrometry, X‐ray photoelectron spectroscopy, and electrochemical properties to probe the surface of the MnMoO₄ nanowires, it is shown that the intrinsic MnMoO₄ oxygen vacancies on the oxygen electrode are an effective strategy to achieve a high reversibility and high efficiency for lithium‐oxygen (Li‐O₂) batteries. The modified MnMoO₄ nanowires exhibit a highly stable capacity at a fixed capacity of 5000 mA h g_sp^?1 (calculated weight of Super P carbon black) during 50 cycles, a high‐rate capability at a current rate of 3000 mA g_sp^?1 during 70 cycles, and a long‐term reversible capacity during 188 cycles at a fixed capacity of 1000 mA h g_sp^?1. It is demonstrated that this strategy for creating mixed transition metal oxides (e.g., MnMoO₄) may pave the way for the new structural design of electrocatalysts for Li‐O₂ batteries.     

Mesoporous TiO2‐Sn/C Core‐Shell Nanowire Arrays as High‐Performance 3D Anodes for Li‐Ion Batteries

Three‐dimensional mesoporous TiO₂‐Sn/C core‐shell nanowire arrays are prepared on Ti foil as anodes for lithium‐ion batteries. Sn formed by a reduction of SnO₂ is encapsulated into TiO₂ nanowires and the carbon layer is coated onto it. For additive‐free, self‐supported anodes in Li‐ion batteries, this unique core‐shell composite structure can effectively buffer the volume change, suppress cracking, and improve the conductivity of the electrode during the discharge‐charge process, thus resulting in superior rate capability and excellent long‐term cycling stability. Specifically, the TiO₂‐Sn/C nanowire arrays display rechargeable discharge capacities of 769, 663, 365, 193, and 90 mA h g^?1 at 0.1C, 0.5C, 2C 10C, and 30C, respectively (1C = 335 mA g^?1). Furthermore, the TiO₂‐Sn/C nanowire arrays exhibit a capacity retention rate of 84.8% with a discharge capacity of over 160 mA h g^?1, even after 100 cycles at a high current rate of 10C.     

Sulfur‐Embedded Activated Multichannel Carbon Nanofiber Composites for Long‐Life,High‐Rate Lithium–Sulfur Batteries

Despite the 3–5 fold higher energy density than the conventional Li‐ion cells at a lower cost, commercialization of Li–S batteries is hindered by the insulating nature of sulfur and the dissolution of intermediate polysulfides (Li₂S _X , 4 < X ≤ 8) into the electrolyte. The authors demonstrate here multichannel carbon nanofibers that are composed of parallel mesoporous channels connected with micropores as sulfur containment. In addition, hydroxyl functional groups are formed on the carbon surface through a chemical activation to enhance the interaction between sulfur and carbon. In the sulfur embedded composite, the mesoporous multichannel enhances the active material utilization and sulfur loading, while the micropores act as a reaction chamber for sulfur component and trap site for polysulfide with the assistance of the functional groups. This sulfur–carbon composite electrode with 2.2 mg cm^?2 sulfur displays excellent performance with high rate capability (initial capacity of 1351 mA h g^?1 at C/5 rate and 847 mA h g^?1 at 5C rate), maintaining 920 mA h g^?1 even after 300 cycles (a decay of 0.07% per cycle). Furthermore, a stable reversible capacity of as high as ≈1100 mA h g^?1 is realized with a higher sulfur loading of 4.6 mg cm^?2.     

Mn‐Rich P′2‐Na0.67[Ni0.1Fe0.1Mn0.8]O2 as High‐Energy‐Density and Long‐Life Cathode Material for Sodium‐Ion Batteries

Herein, P′2‐type Na_0.67[Ni_0.1Fe_0.1Mn_0.8]O₂ is introduced as a promising new cathode material for sodium‐ion batteries (SIBs) that exhibits remarkable structural stability during repetitive Na⁺ de/intercalation. The O? Ni? O? Mn? O? Fe? O bond in the octahedra of transition‐metal layers is used to suppress the elongation of the Mn? O bond and to improve the electrochemical activity, leading to the highly reversible Na storage mechanism. A high discharge capacity of ≈220 mAh g^?1 (≈605 Wh kg^?1) is delivered at 0.05 C (13 mAg^?1) with a high reversible capacity of ≈140 mAh g^?1 at 3 C and excellent capacity retention of 80% over 200 cycles. This performance is associated with the reversible P′2–OP4 phase transition and small volume change upon charge and discharge (≈3%). The nature of the sodium storage mechanism in a full cell paired with a hard carbon anode reveals an unexpectedly high energy density of ≈542 Wh kg^?1 at 0.2 C and good capacity retention of ≈81% for 500 cycles at 1 C (260 mAg^?1).     

A Dual‐Insertion Type Sodium‐Ion Full Cell Based on High‐Quality Ternary‐Metal Prussian Blue Analogs

Prussian blue analogs (PBAs) are especially investigated as superior cathodes for sodium‐ion batteries (SIBs) due to high theoretical capacity (≈170 mA h g^?1) with 2‐Na storage and low cost. However, PBAs suffer poor cyclability due to irreversible phase transition in deep charge/discharge states. PBAs also suffer low crystallinity, with considerable [Fe(CN)₆] vacancies, and coordinated water in crystal frameworks. Presently, a new chelating agent/surfactant coassisted crystallization method is developed to prepare high‐quality (HQ) ternary‐metal Ni_xCo_1?x[Fe(CN)₆] PBAs. By introducing inactive metal Ni to suppress capacity fading caused by excessive lattice distortion, these PBAs have tunable limits on depth of charge/discharge. HQ‐Ni_xCo_1?x[Fe(CN)₆] (x = 0.3) demonstrates the best reversible Na‐storage behavior with a specific capacity of ≈145 mA h g^?1 and a remarkably improved cycle performance, with ≈90% capacity retention over 600 cycles at 5 C. Furthermore, a dual‐insertion full cell on the cathode and NaTi₂(PO₄)₃ anode delivers reversible capacity of ≈110 mA h g^?1 at a current rate of 1.0 C without capacity fading over 300 cycles, showing promise as a high‐performance SIB for large‐scale energy‐storage systems. The ultrastable cyclability achieved in the lab and explained herein is far beyond that of any previously reported PBA‐based full cells.     

Hierarchical Zn–Co–S Nanowires as Advanced Electrodes for All Solid State Asymmetric Supercapacitors

A facile two‐step strategy is developed to design the large‐scale synthesis of hierarchical, unique porous architecture of ternary metal hydroxide nanowires grown on porous 3D Ni foam and subsequent effective sulfurization. The hierarchical Zn–Co–S nanowires (NWs) arrays are directly employed as an electrode for supercapacitors application. The as‐synthesized Zn–Co–S NWs deliver an ultrahigh areal capacity of 0.9 mA h cm^?2 (specific capacity of 366.7 mA h g^?1) at a current density of 3 mA cm^?2, with an exceptional rate capability (≈227.6 mA h g^?1 at a very high current density of 40 mA cm^?2) and outstanding cycling stability (≈93.2% of capacity retention after 10 000 cycles). Most significantly, the assembled Zn–Co–S NWs//Fe₂O₃@reduced graphene oxide asymmetric supercapacitors with a wide operating potential window of ≈1.6 V yield an ultrahigh volumetric capacity of ≈1.98 mA h cm^?3 at a current density of 3 mA cm^?2, excellent energy density of ≈81.6 W h kg^?1 at a power density of ≈559.2 W kg^?1, and exceptional cycling performance (≈92.1% of capacity retention after 10 000 cycles). This general strategy provides an alternative to design the other ternary metal sulfides, making it facile, free‐standing, binder‐free, and cost‐effective ternary metal sulfide‐based electrodes for large‐scale applications in modern electronics.     

In Situ Generation of Few‐Layer Graphene Coatings on SnO2‐SiC Core‐Shell Nanoparticles for High‐Performance Lithium‐Ion Storage

A simple ball‐milling method is used to synthesize a tin oxide‐silicon carbide/few‐layer graphene core‐shell structure in which nanometer‐sized SnO₂ particles are uniformly dispersed on a supporting SiC core and encapsulated with few‐layer graphene coatings by in situ mechanical peeling. The SnO₂‐SiC/G nanocomposite material delivers a high reversible capacity of 810 mA h g^?1 and 83% capacity retention over 150 charge/discharge cycles between 1.5 and 0.01 V at a rate of 0.1 A g^?1. A high reversible capacity of 425 mA h g^?1 also can be obtained at a rate of 2 A g^?1. When discharged (Li extraction) to a higher potential at 3.0 V (vs. Li/Li⁺), the SnO₂‐SiC/G nanocomposite material delivers a reversible capacity of 1451 mA h g^?1 (based on the SnO₂ mass), which corresponds to 97% of the expected theoretical capacity (1494 mA h g^?1, 8.4 equivalent of lithium per SnO₂), and exhibits good cyclability. This result suggests that the core‐shell nanostructure can achieve a completely reversible transformation from Li_4.4Sn to SnO₂ during discharging (i.e., Li extraction by dealloying and a reversible conversion reaction, generating 8.4 electrons). This suggests that simple mechanical milling can be a powerful approach to improve the stability of high‐performance electrode materials involving structural conversion and transformation.     

High and Reversible Lithium Ion Storage in Self‐Exfoliated Triazole‐Triformyl Phloroglucinol‐Based Covalent Organic Nanosheets

Covalent organic framework (COF) can grow into self‐exfoliated nanosheets. Their graphene/graphite resembling microtexture and nanostructure suits electrochemical applications. Here, covalent organic nanosheets (CON) with nanopores lined with triazole and phloroglucinol units, neither of which binds lithium strongly, and its potential as an anode in Li‐ion battery are presented. Their fibrous texture enables facile amalgamation as a coin‐cell anode, which exhibits exceptionally high specific capacity of ≈720 mA h g^?1 (@100 mA g^?1). Its capacity is retained even after 1000 cycles. Increasing the current density from 100 mA g^?1 to 1 A g^?1 causes the specific capacity to drop only by 20%, which is the lowest among all high‐performing anodic COFs. The majority of the lithium insertion follows an ultrafast diffusion‐controlled intercalation (diffusion coefficient, D_Li⁺ = 5.48 × 10^?11 cm² s^?1). The absence of strong Li‐framework bonds in the density functional theory (DFT) optimized structure supports this reversible intercalation. The discrete monomer of the CON shows a specific capacity of only 140 mA h g^?1 @50 mA g^?1 and no sign of lithium intercalation reveals the crucial role played by the polymeric structure of the CON in this intercalation‐assisted conductivity. The potentials mapped using DFT suggest a substantial electronic driving‐force for the lithium intercalation. The findings underscore the potential of the designer CON as anode material for Li‐ion batteries.     

Hydrogenated Core–Shell MAX@K2Ti8O17 Pseudocapacitance with Ultrafast Sodium Storage and Long‐Term Cycling

Sodium‐ion batteries are considered alternatives to lithium‐ion batteries for energy storage devices due to their competitive cost and source abundance. However, the development of electrode materials with long‐term stability and high capacity remains a great challenge. Here, this paper describes for the first time the synthesis of a new class of core–shell MAX@K₂Ti₈O₁₇ by alkaline hydrothermal reaction and hydrogenation of MAX, which grants high sodium ion‐intercalation pseudocapacitance. This composite electrode displays extraordinary reversible capacities of 190 mA h g^?1 at 200 mA g^?1 (0.9 C, theoretical value of ≈219 mA h g^?1) and 150 mA h g^?1 at 1000 mA g^?1 (4.6 C). More importantly, a reversible capacity of 75 mA h g^?1 at 10 000 mA g^?1 (46 C) is retained without any apparent capacity decay even after more than 10 000 cycles. Experimental tests and first‐principle calculations confirm that the increase in Ti³⁺ on the surface layers of MAX@K₂Ti₈O₁₇ by hydrogenation increases its conductivity in addition to enhancing the sodium‐ion intercalation pseudocapacitive process. Furthermore, the distorted dodecahedrons between Ti and O layers not only provide abundant sites for sodium‐ion accommodation but also act as wide tunnels for sodium‐ion transport.     

Carbon Coated Bimetallic Sulfide Hollow Nanocubes as Advanced Sodium Ion Battery Anode

Sodium ion battery (SIB) as a next‐generation battery has been drawing much attention due to the abundance and even distribution of sodium source. Metal sulfides with high theoretical capacity and good electrical conductivity are promising anode candidates for SIB, however, the structural collapse caused by severe volume change during the de/sodiation process typically results in a fast capacity decay, limited rate capability, and cycling stability. In this work, by careful composition and structure design, polydopamine coated Prussian blue analogs derived carbon coated bimetallic sulfide hollow nanocubes (PBCS) are prepared with distinguished morphology, higher surface area, smaller charge transfer resistance, and higher sodium diffusion coefficient than the uncoated bimetallic sulfides. An optimum carbon coated bimetallic sulfide hollow nanocube anode delivers a specific capacity of ≈500 mA h g^?1 at 50 mA g^?1 with ethylene carbonate/dimethyl carbonate (1:1, vol%) electrolyte in the presence of fluoroethylene carbonate additives. A capacity of 122.3 mA h g^?1 can be realized at 5000 mA g^?1, showing good rate performance. In addition the carbon coated bimetallic sulfide hollow nanocubes can maintain capacity of 87 mA h g^?1 after being cycled at 500 mA g^?1 for 150 times, indicating its good cycling stability. The structure integrity, high specific capacity, good rate performance, and cycling stability of PBCS render it a promising anode material for advanced SIB.     

Promoting Highly Reversible Sodium Storage of Iron Sulfide Hollow Polyhedrons via Cobalt Incorporation and Graphene Wrapping

Sodium ion batteries (SIBs) have drawn significant attention owing to their low cost and inherent safety. However, the absence of suitable anode materials with high rate capability and long cycling stability is the major challenge for the practical application of SIBs. Herein, an efficient anode material consisting of uniform hollow iron sulfide polyhedrons with cobalt doping and graphene wrapping (named as CoFeS@rGO) is developed for high‐rate and long‐life SIBs. The graphene‐encapsulated hollow composite assures fast and continuous electron transportation, high Na⁺ ion accessibility, and strong structural integrity, showing an extremely small volume expansion of only 14.9% upon sodiation and negligible volume contraction during the desodiation. The CoFeS@rGO electrode exhibits high specific capacity (661.9 mAh g^?1 at 100 mA g^?1), excellent rate capability (449.4 mAh g^?1 at 5000 mA g^?1), and long cycle life (84.8% capacity retention after 1500 cycles at 1000 mA g^?1). In situ X‐ray diffraction and selected‐area electron diffraction patterns show that this novel CoFeS@rGO electrode is based on a reversible conversion reaction. More importantly, when coupled with a Na₃V₂(PO₄)₃/C cathode, the sodium ion full battery delivers a superexcellent rate capability (496.8 mAh g^?1 at 2000 mA g^?1) and ≈96.5% capacity retention over 200 cycles at 500 mA g^?1 in the 1.0–3.5 V window. This work indicates that the rationally designed anode material is highly applicable for the next generation SIBs with high‐rate capability and long‐term cyclability.     

Nanoparticles Encapsulated in Porous Carbon Matrix Coated on Carbon Fibers: An Ultrastable Cathode for Li‐Ion Batteries

Nanostructured V₂O₅ is emerging as a new cathode material for lithium ion batteries for its distinctly high theoretic capacity over the current commercial cathodes. The main challenges associated with nanostructured V₂O₅ cathodes are structural degradation, instability of the solid‐electrolyte interface layer, and poor electron conductance, which lead to low capacity and rapid decay of cyclic stability. Here, a novel composite structure of V₂O₅ nanoparticles encapsulated in 3D networked porous carbon matrix coated on carbon fibers (V₂O₅/3DC‐CFs) is reported that effectively addresses the mentioned problems. Remarkably, the V₂O₅/3DC‐CF electrode exhibits excellent overall lithium‐storage performance, including high Coulombic efficiency, excellent specific capacity, outstanding cycling stability and rate property. A reversible capacity of ≈183 mA h g^?1 is obtained at a high current density of 10 C, and the battery retains 185 mA h g^?1 after 5000 cycles, which shows the best cycling stability reported to date among all reported cathodes of lithium ion batteries as per the knowledge. The outstanding overall properties of the V₂O₅/3DC‐CF composite make it a promising cathode material of lithium ion batteries for the power‐intensive energy storage applications.     

Vertically Aligned MoS2 Nanosheets Patterned on Electrochemically Exfoliated Graphene for High‐Performance Lithium and Sodium Storage

Molybdenum disulfide (MoS₂) has been recognized as a promising anode material for high‐energy Li‐ion (LIBs) and Na‐ion batteries (SIBs) due to its apparently high capacity and intriguing 2D‐layered structure. The low conductivity, unsatisfied mechanical stability, and limited active material utilization are three key challenges associated with MoS₂ electrodes especially at high current rates and mass active material loading. Here, vertical MoS₂ nanosheets are controllably patterned onto electrochemically exfoliated graphene (EG). Within the achieved hierarchical architecture, the intimate contact between EG and MoS₂ nanosheets, interconnected network, and effective exposure of active materials by vertical channels simultaneously overcomes the above three problems, enabling high mechanical integrity and fast charge transport kinetics. Serving as anode material for LIBs, EG‐MoS₂ with 95 wt% MoS₂ content delivered an ultrahigh‐specific capacity of 1250 mA h g^?1 after 150 stable cycles at 1 A g^?1, which is among the highest values in all reported MoS₂ electrodes, and excellent rate performance (970 mA h g^?1 at 5 A g^?1). Moreover, impressive cycling stability (509 mA h g^?1 at 1 A g^?1 after 250 cycles) and rate capability (423 mA h g^?1 at 2 A g^?1) were also achieved for SIBs. The area capacities reached 1.27 and 0.49 mA h cm^?2 at ≈1 mA cm^?2 for LIBs and SIBs, respectively. This work may inspire the development of new 2D hierarchical structures for high efficiency energy storage and conversion.     

Tailored Plum Pudding‐Like Co2P/Sn Encapsulated with Carbon Nanobox Shell as Superior Anode Materials for High‐Performance Sodium‐Ion Capacitors

Sodium‐ion capacitors (SICs) are emerging energy storage devices with high energy, high power, and durable life. Sn is a promising anode material for lithium storage, but the poor conductivity of the a‐NaSn phase upon sodaition hinders its implementation in SICs. Herein, a superior Sn‐based anode material consisting of plum pudding‐like Co₂P/Sn yolk encapsulated with nitrogen‐doped carbon nanobox (Co₂P/Sn@NC) for high‐performance SICs is reported. The 8–10 nm metallic nanoparticles produced in situ are uniformly dispersed in the amorphous Sn matrix serving as conductive fillers to facilitate electron transfer in spite of the formation of electrically resistive a‐NaSn phase during cycling. Meanwhile, the carbon shell buffers the large expansion of active Sn and provides a stable electrode–electrolyte interface. Owing to these merits, the yolk–shell Co₂P/Sn@NC demonstrates a large capacity of 394 mA h g^?1 at 100 mA g^?1, high rate capability of 168 mA h g^?1 at 5000 mA g^?1, and excellent cyclability with 87% capacity retention after 10 000 cycles. By integrating the Co₂P/Sn@NC anode with a peanut shell‐derived carbon cathode in the SIC, high energy densities of 112.3 and 43.7 Wh kg^?1 at power densities of 100 and 10 000 W kg^?1 are achieved.     

A Versatile Pyramidal Hauerite Anode in Congeniality Diglyme‐Based Electrolytes for Boosting Performance of Li‐ and Na‐Ion Batteries

For the first time, environmentally friendly sulfur‐rich pyramidal MnS₂ synthesized via a single‐step hydrothermal process is used as a high‐performance anode material in Li‐ion and Na‐ion batteries. The superior electrochemical performance of the MnS₂ electrode along with its high compatibility with ether‐based electrolytes are analyzed in both half‐ and full‐cell configurations. The reversible capacities of ≈84 mAh g^?1 and ≈74 mAh g^?1 at a current density of 50 mA g^?1 are retained in the Li‐ion and Na‐ion full‐cells, respectively, over 200 cycles with excellent capacity retentions. Moreover, important findings regarding activation processes in the presence of a new phase transition and protective electrolyte interphase layer are revealed using ab initio density function theory calculation and in situ potentio‐electrochemical impedance spectroscopy. The detailed complex redox mechanism of MnS₂ in Li/Na half‐cells is also elucidated by ex situ X‐ray photoelectron spectroscopy.     

Chemical Synthesis of 3D Graphene‐Like Cages for Sodium‐Ion Batteries Applications

Sodium (Na) super ion conductor structured Na₃V₂(PO₄)₃ (NVP) is extensively explored as cathode material for sodium‐ion batteries (SIBs) due to its large interstitial channels for Na⁺ migration. The synthesis of 3D graphene‐like structure coated on NVP nanoflakes arrays via a one‐pot, solid‐state reaction in molten hydrocarbon is reported. The NVP nanoflakes are uniformly coated by the in situ generated 3D graphene‐like layers with the thickness of 3 nm. As a cathode material, graphene covered NVP nanoflakes exhibit excellent electrochemical performances, including close to theoretical reversible capacity (115.2 mA h g^?1 at 1 C), superior rate capability (75.9 mA h g^?1 at 200 C), and excellent cyclic stability (62.5% of capacity retention over 30000 cycles at 50 C). Furthermore, the 3D graphene‐like cages after removing NVP also serve as a good anode material and deliver a specific capacity of 242.5 mA h g^?1 at 0.1 A g^?1. The full SIB using these two cathode and anode materials delivers a high specific capacity (109.2 mA h g^?1 at 0.1 A g^?1) and good cycling stability (77.1% capacity retention over 200 cycles at 0.1 A g^?1).