电转化法构建变形链球菌UA159 comD缺陷菌株

目的构建变形链球菌UAl59密度感应相关的comD基因缺陷菌株,为进一步研究该基因功能做准备。方法根据同源重组原理,利用变形链球菌UAl59comD基因同源重组DNA片段,采用电击转化方法获取转化菌落,通过形态学观察、生化特性检测、PCR及测序、RT-PCR对缺陷菌进行鉴定。结果在含有红霉素（10μg/mL）的琼脂平板上出现转化菌落,鉴定结果均显示转化菌为comD缺陷菌。结论成功构建了变形链球菌UA159comD基因缺陷菌株。     

替代失活法构建变形链球菌LuxS基因缺陷株

目的 LuxS基因是变形链球菌生物膜早期形成过程中的关键基因,构建该基因的缺陷菌。方法采用长臂同源多聚酶链反应（LFH-PCR）方法构建含红霉素耐药基因片段的LuxS基因上、下游同源序列的连接片段,转化到变形链球菌中,在红霉素的平板上筛选缺陷菌株,并采用PCR鉴定。结果对变形链球菌LuxS基因缺陷菌株进行PCR和DNA序列测定分析证实构建成功。结论成功构建出变形链球菌LuxS基因的缺陷菌株,为后期针对变形链球菌LuxS基因的相关研究奠定基础。     

变形链球菌耐氟菌株耐酸相关基因ropA的克隆及蛋白表达

克隆并表达变形链球菌耐氟菌株耐酸相关基因ropA。以变形链球菌UA159的耐氟菌株全基因组为模版,PCR扩增ropA基因并与p MD-18T克隆载体连接构建重组克隆质粒,测序鉴定。Bam HⅠ、HindⅢ双酶切重组克隆质粒,回收目的基因片段并与p Pro EX HTa表达载体通过粘性末端连接构建重组表达质粒,转化入大肠埃希菌感受态细胞DH5α,IPTG诱导,SDS-PAGE检测Rop A表达量。测序结果为变形链球菌UA159的耐氟菌株ropA基因碱基序列与亲代菌株UA159完全一致。SDS-PAGE结果显示IPTG成功诱导Rop A蛋白表达,并且随诱导时间的延长蛋白表达增多。变形链球菌UA159耐氟菌株的耐酸相关基因ropA未发生突变,说明变形链球菌耐氟菌株耐酸性增强不是由ropA碱基序列的改变导致。本研究成功诱导Rop A蛋白表达,为后续研究Rop A蛋白功能奠定了基础。     

嗜线虫致病杆菌Xna基因同源重组载体的构建及遗传转化体系的建立

构建嗜线虫致病杆菌Xna基因的同源重组载体和建立该细菌的遗传转化体系.扩增嗜线虫致病杆菌XNA基因的左右同源片段及质粒PEASY-T1上的卡那抗性基因Km;利用重叠延伸引物PCR法将这3个片段连接起来,然后将其克隆至自杀性载体PJQ200.采用电激法将同源重组载体DNA转化到供体细菌,再利用二亲本结合转移方法将供体细菌中的载体转化到受体细菌CB6菌株.结果成功地扩增了Xna基因的左右同源臂及卡那抗性基因的全长融合片段、构建了Xna基因的同源重组载体,并建立了嗜线虫致病杆菌北京变种的遗传转化体系.     

产L-乳酸的运动发酵单胞菌代谢工程菌株的构建

以运动发酵单胞菌(Zymomonas mobilis)CP4基因组DNA为模板,采用PCR技术克隆得到其丙酮酸脱氢酶基因(pdc)同源下游p3片段,并连接到广谱宿主载体pBBR1MCS3-Ppdc-ldhL中构建了重组质粒pBBR1MCS3-Ppdc-ldhL-p3,将此重组质粒转化到受体菌Z.mobilis CP4中,分别以Ppdc和p3片段作为同源上游和下游片段,利用同源双交换重组技术将重组质粒中的ldhL基因置换了Z.mobilis染色体中的pdc基因,得到重组菌株Z.mobilis CP4(△pdc∷ldhL).测得重组菌株乳酸产量为10.8g/L,明显高于出发菌株,说明初步成功构建了产L-乳酸的运动发酵单胞菌代谢工程菌株.     

一种基于线性DNA片段同源重组的嗜盐古菌高效基因敲除系统

随着功能基因组学研究的深入发展,基因敲除技术日益成为基因功能研究的重要手段。嗜盐古菌Haloferax volcanii易于培养,是研究古菌基因功能的良好模式菌株。虽然现已开发了多种嗜盐古菌的遗传操作系统,但基因敲除成功率不十分理想。这些遗传操作方法基于pyrE筛选标记,利用携带同源片段的环状质粒与基因组同源片段间的两次同源重组,敲除目的基因。由于基于环状质粒和pyrE筛选标记的经典同源重组敲除方法在二次重组时,普遍存在回复到野生型菌株的可能,导致二次重组子中敲除目的基因的阳性菌株比例较低。为了克服传统同源重组技术的上述缺陷,文章建立了基于线性DNA片段的同源重组技术。该方法通过一次重组在目标基因的下游引入一段上游同源片段和pyrE标记,从而限定二次重组的发生部位只能在两段上游同源片段之间,发生二次重组的重组子理论上都敲除了目标基因。利用该方法,文章成功敲除了嗜盐古菌Haloferax volcanii的xpd2基因,阳性克隆率达65%。这种线性DNA片段重组法为嗜盐古菌的基因敲除提供了一种高效策略,便于嗜盐古菌的基因改造。     

以gfp为报告基因的肺炎链球菌启动子诱捕文库的构建与分析

首先构建一个以gfp(green fluorescence protein)为报告基因的自杀质粒pEVP3-SDGFP,将肺炎链球菌基因组DNA的随机酶切片段(200bp～800 bp)克隆到该质粒gfp基因上游的多克隆位点,得到约58000个含有肺炎链球茵基因组DNA随机酶切片段的重组子,提取质粒即为质粒库,该库大约覆盖肺炎链球菌基因组全长的5倍,插入率达到90%以上,且有较强的随机性,质量较高.将该质粒库转化入肺炎链球菌TIGR4菌株,带有随机片段的报告质粒通过同源重组的方式将gfp基因融合于细菌染色体上该随机片段之后,利用质粒的抗生素抗性基因筛选出重组菌株,从而构建出相应的菌株库,共获得包含约500000个肺炎链球菌转化子的菌株库,经体内、外实验表明,其包含插入了S.pn体内、外表达基因片段的细菌,可以报告特定条件下的基因表达,并可通过流式细胞仪识别、分选.该文库的构建为进一步利用差异荧光诱导技术筛选肺炎链球菌体内诱导基因奠定了基础.     

一种高效构建同源重组DNA片段的方法——融合PCR

融合PCR技术（fusion PCR）采用具有互补末端的引物,形成具有重叠链的PCR产物,通过PCR产物重叠链的延伸,从而将不同来源的任意DNA片段连接起来,此技术在不需要内切酶消化和连接酶处理的条件下实现DNA片段的体外连接,为同源重组片段的构建提供了快速简捷的途径。对原有的融合PCR技术进行改进,以三个同源重组线性DNA片段的构建为例,详细论述了改进的融合PCR技术的反应过程及技术体系。结果表明,改进的融合PCR技术可以同时进行三个片段及四个片段的融合反应,产物长度均在4.5kb以上,各同源重组片段在扩增过程中均无突变发生,获得的片段可以用于后续实验分析。     

变形链球菌UA159及其基因缺陷菌生长特性变化的初步研究

目的探讨变形链球菌密度信号系统相关基因缺陷后其生长特性的变化情况。方法分别配制BHI液体培养基,含2%葡萄糖的BHI液体培养基,含2%蔗糖的BHI液体培养基,然后将细菌接种于上述3个营养环境中生长,采用722S型可见光分光光度计,进行细菌生长曲线的测定。结果在3种不同的营养环境中,变形链球菌UA159△ComD基因缺陷菌株的生长速度最快,变形链球菌UA159菌株变形链球菌UA159△LuxS基因变异株次之,变形链球菌UA159野生菌株最慢。结论在本实验中,无论那种密度感应信号系统被阻断后,均会影响变形链球菌的生长。     

一步法快速构建多片段连接的同源臂载体

目的：建立一种简便、高效,可一步完成多个片段连接,从而构建含同源臂的载体的方法。方法：按照酶切后可产生前后片段相匹配的粘性末端接头的原则设计PCR引物,在目的片段两端均引入BsaⅠ酶切位点。以G160基因为例,PCR扩增打靶用左右同源臂片段、示踪基因CMV-EGFP片段、载体骨架pMD19－T等4个片段,纯化后一起加入一个反应管中,并加入BsaⅠ限制性内切酶和T7DNA连接酶及相应缓冲液,进行酶切、酶连接共10～50个循环反应,一步构建含同源臂载体的质粒;产物经高温处理后,直接转化感受态细胞,并进行重组子PCR鉴定;对pMD19－T载体进行优化,突变载体上的BsaⅠ酶切位点,把示踪基因CMV-EGFP片段引入pHSG298－T载体,再选择不同的G160基因同源臂片段组合对构建系统进行验证。结果：重组质粒酶切和PCR结果表明,应用一步法可成功连接多个片段来构建含同源臂及示踪基因的克隆载体;用优化后的pMD19－T－O载体体系,在2d内即完成了6种各含4个片段的载体的构建。结论：多个基因片段一步无缝连接的方法简便、易行、可靠,不仅可快速构建某类载体系统,还可对基因进行精确的点突变,该系统可用于快速构建基因打靶载体。     

变形链球菌反应调控蛋白ComE结合序列的初步筛选

目的：从变形链球菌基因组中筛选反应调控蛋白ComE结合的核酸序列。方法：⑴提取变形链球菌UA159 基因组,进行超声剪切处理。以基因组片段为模板,用随机引物进行延伸,切胶纯化和PCR 扩增后获得基因组文库。⑵应用基因组 SELEX 技术,以ComE 蛋白为靶物质,与变形链球菌基因组文库共同孵育,循环筛选8轮。筛选产物TA克隆后送去测序,测序结果进行生物信息学分析。⑶将分析得到的2个序列分别克隆入pFW5-luc载体中,然后分别重组到变形链球菌UA159野生株和comE突变株的基因组中,采用RT-PCR的方法检测luc片段的表达。结果：⑴获得了变形链球菌UA159 的基因组文库,片段范围约为100～300bp。⑵随机挑取54个克隆送去测序,经生物信息学分析和RT-PCR初步验证,最终获得1个ComE 蛋白可能的结合序列。结论：采用基因组 SELEX 技术,筛选反应调控蛋白ComE可能的结合序列,并进行了初步验证,为后续进行变形链球菌反应调控蛋白ComE调控机制的研究奠定了基础。     

The specific genes for lantibiotic mutacin II biosynthesis in Streptococcus mutans T8 are clustered and can be transferred en bloc

Mutacin II is a ribosomally synthesized peptide lantibiotic produced by group II Streptococcus mutans. DNA sequencing has revealed that the mutacin II biosynthetic gene cluster consists of seven specific open reading frames: a regulator (mutR), the prepromutacin structural gene (mutA), a modifying protein (mutM), an ABC transporter (mutT), and an immunity cluster (mutFEG). Transformations of a non-mutacin-producing strain, S. mutans UA159, and a mutacin I-producing strain, S. mutans UA140, with chromosomal DNA from S. mutans T8 with an aphIII marker inserted upstream of the mutacin II structural gene yielded transformants producing mutacin II and mutacins I and II, respectively.     

Competence-dependent endogenous DNA rearrangement and uptake of extracellular DNA give a natural variant of Streptococcus mutans without biofilm formation

The production of water-insoluble glucan (WIG) enables Streptococcus mutans to survive and persist in the oral niche. WIG is produced from sucrose by glucosyltransferase encoded tandemly by the highly homologous gtfB and gtfC genes. Conversely, a single hybrid gene from the endogenous recombination of gtfB and gtfC is easily generated using RecA, resulting in S. mutans UA159 WIG- (rate of ～1.0×10(-3)). The pneumococcus recA gene is regulated as a late competence gene. comX gene mutations did not lead to the appearance of WIG- cells. The biofilm collected from the flow cell had more WIG- cells than among the planktonic cells. Among the planktonic cells, WIG- cells appeared after 16 h and increased ～10-fold after 32 h of cultivation, suggesting an increase in planktonic WIG- cells after longer culture. The strain may be derived from the biofilm environment. In coculture with donor WIG+ and recipient WIG- cells, the recipient cells reverted to WIG+ and acquired an intact gtfBC region from the environment, indicating that the uptake of extracellular DNA resulted in the phenotypic change. Here we demonstrate that endogenous DNA rearrangement and uptake of extracellular DNA generate WIG- cells and that both are induced by the same signal transducer, the com system. Our findings may help in understanding how S. mutans can adapt to the oral environment and may explain the evolution of S. mutans.     

BrpA is involved in regulation of cell envelope stress responses in Streptococcus mutans

Previous studies have shown that BrpA plays a major role in acid and oxidative stress tolerance and biofilm formation by Streptococcus mutans. Mutant strains lacking BrpA also display increased autolysis and decreased viability, suggesting a role for BrpA in cell envelope integrity. In this study, we examined the impact of BrpA deficiency on cell envelope stresses induced by envelope-active antimicrobials. Compared to the wild-type strain UA159, the BrpA-deficient mutant (TW14D) was significantly more susceptible to antimicrobial agents, especially lipid II inhibitors. Several genes involved in peptidoglycan synthesis were identified by DNA microarray analysis as downregulated in TW14D. Luciferase reporter gene fusion assays also revealed that expression of brpA is regulated in response to environmental conditions and stresses induced by exposure to subinhibitory concentrations of cell envelope antimicrobials. In a Galleria mellonella (wax worm) model, BrpA deficiency was shown to diminish the virulence of S. mutans OMZ175, which, unlike S. mutans UA159, efficiently kills the worms. Collectively, these results suggest that BrpA plays a role in the regulation of cell envelope integrity and that deficiency of BrpA adversely affects the fitness and diminishes the virulence of OMZ175, a highly invasive strain of S. mutans.     

Functional genomics approach to identifying genes required for biofilm development by Streptococcus mutans

Streptococcus mutans, the primary etiological agent of human dental caries, is an obligate biofilm-forming bacterium. The goals of this study were to identify the gene(s) required for biofilm formation by this organism and to elucidate the role(s) that some of the known global regulators of gene expression play in controlling biofilm formation. In S. mutans UA159, the brpA gene (for biofilm regulatory protein) was found to encode a novel protein of 406 amino acid residues. A strain carrying an insertionally inactivated copy of brpA formed longer chains than did the parental strain, aggregated in liquid culture, and was unable to form biofilms as shown by an in vitro biofilm assay. A putative homologue of the enzyme responsible for synthesis of autoinducer II (AI-2) of the bacterial quorum-sensing system was also identified in S. mutans UA159, but insertional inactivation of the gene (luxS(Sm)) did not alter colony or cell morphology or diminish the capacity of S. mutans to form biofilms. We also examined the role of the homologue of the Bacillus subtilis catabolite control protein CcpA in S. mutans in biofilm formation, and the results showed that loss of CcpA resulted in about a 60% decrease in the ability to form biofilms on an abiotic surface. From these data, we conclude that CcpA and BrpA may regulate genes that are required for stable biofilm formation by S. mutans.     

Identification of nlmTE, the locus encoding the ABC transport system required for export of nonlantibiotic mutacins in Streptococcus mutans

Streptococcus mutans UA159, the genome sequence reference strain, exhibits nonlantibiotic bacteriocin (mutacin) activity. In this study, we have combined bioinformatic and mutational analyses to identify the ABC transporter designated NlmTE, which is required for mutacin biogenesis in strain UA159 as well as in another mutacin producer, S. mutans N.