Rescue of the orphan enzyme isoguanine deaminase

Cytosine deaminase (CDA) from Escherichia coli was shown to catalyze the deamination of isoguanine (2-oxoadenine) to xanthine. Isoguanine is an oxidation product of adenine in DNA that is mutagenic to the cell. The isoguanine deaminase activity in E. coli was partially purified by ammonium sulfate fractionation, gel filtration, and anion exchange chromatography. The active protein was identified by peptide mass fingerprint analysis as cytosine deaminase. The kinetic constants for the deamination of isoguanine at pH 7.7 are as follows: k(cat) = 49 s(-1), K(m) = 72 μM, and k(cat)/K(m) = 6.7 × 10(5) M(-1) s(-1). The kinetic constants for the deamination of cytosine are as follows: k(cat) = 45 s(-1), K(m) = 302 μM, and k(cat)/K(m) = 1.5 × 10(5) M(-1) s(-1). Under these reaction conditions, isoguanine is the better substrate for cytosine deaminase. The three-dimensional structure of CDA was determined with isoguanine in the active site.     

The catalase activity of diiron adenine deaminase

Adenine deaminase (ADE) from the amidohydrolase superfamily (AHS) of enzymes catalyzes the conversion of adenine to hypoxanthine and ammonia. Enzyme isolated from Escherichia coli was largely inactive toward the deamination of adenine. Molecular weight determinations by mass spectrometry provided evidence that multiple histidine and methionine residues were oxygenated. When iron was sequestered with a metal chelator and the growth medium supplemented with Mn²⁺ before induction, the post-translational modifications disappeared. Enzyme expressed and purified under these conditions was substantially more active for adenine deamination. Apo-enzyme was prepared and reconstituted with two equivalents of FeSO₄. Inductively coupled plasma mass spectrometry and Mössbauer spectroscopy demonstrated that this protein contained two high-spin ferrous ions per monomer of ADE. In addition to the adenine deaminase activity, [Fe^II/Fe^II]-ADE catalyzed the conversion of H₂O₂ to O₂ and H₂O. The values of k_cat and k_cat/K_m for the catalase activity are 200 s⁻¹ and 2.4 × 10⁴ M⁻¹ s⁻¹, respectively. [Fe^II/Fe^II]-ADE underwent more than 100 turnovers with H₂O₂ before the enzyme was inactivated due to oxygenation of histidine residues critical for metal binding. The iron in the inactive enzyme was high-spin ferric with g_ave = 4.3 EPR signal and no evidence of anti-ferromagnetic spin-coupling. A model is proposed for the disproportionation of H₂O₂ by [Fe^II/Fe^II]-ADE that involves the cycling of the binuclear metal center between the di-ferric and di-ferrous oxidation states. Oxygenation of active site residues occurs via release of hydroxyl radicals. These findings represent the first report of redox reaction catalysis by any member of the AHS.     

Three-dimensional structure and catalytic mechanism of cytosine deaminase

Cytosine deaminase (CDA) from E. coli is a member of the amidohydrolase superfamily. The structure of the zinc-activated enzyme was determined in the presence of phosphonocytosine, a mimic of the tetrahedral reaction intermediate. This compound inhibits the deamination of cytosine with a K(i) of 52 nM. The zinc- and iron-containing enzymes were characterized to determine the effect of the divalent cations on activation of the hydrolytic water. Fe-CDA loses activity at low pH with a kinetic pK(a) of 6.0, and Zn-CDA has a kinetic pK(a) of 7.3. Mutation of Gln-156 decreased the catalytic activity by more than 5 orders of magnitude, supporting its role in substrate binding. Mutation of Glu-217, Asp-313, and His-246 significantly decreased catalytic activity supporting the role of these three residues in activation of the hydrolytic water molecule and facilitation of proton transfer reactions. A library of potential substrates was used to probe the structural determinants responsible for catalytic activity. CDA was able to catalyze the deamination of isocytosine and the hydrolysis of 3-oxauracil. Large inverse solvent isotope effects were obtained on k(cat) and k(cat)/K(m), consistent with the formation of a low-barrier hydrogen bond during the conversion of cytosine to uracil. A chemical mechanism for substrate deamination by CDA was proposed.     

Kinetic and chemical mechanism of Mycobacterium tuberculosis 1-deoxy-D-xylulose-5-phosphate isomeroreductase

1-Deoxy-D-xylulose-5-phosphate (DXP) isomeroreductase catalyzes the isomerization and reduced nicotinamide adenine dinucleotide phosphate- (NADPH-) dependent reduction of DXP to generate 2-C-methylerythritol 4-phosphate (MEP) in the first committed step of the MEP pathway of isoprenoid biosynthesis. We have cloned the gene encoding the Mycobacterium tuberculosis DXP isomeroreductase, expressed the protein in Escherichia coli, and purified the enzyme to homogeneity using conventional column chromatography methods. DXP isomeroreductase is a metal ion-activated enzyme displaying superior specificity for Co(2+), good specificity for Mn(2+), and poor specificity for Mg(2+). Although NADPH is preferred over reduced nicotinamide adenine dinucleotide (NADH) about 100-fold as evaluated by the relative k(cat)/K(m) values, the maximum turnover numbers are similar, suggesting that the 2'-phosphate of NADPH contributes predominantly to binding and not to catalysis. While k(cat) was independent of pH in the region 6.0 相似文献   

A new phosphotriesterase from Sulfolobus acidocaldarius and its comparison with the homologue from Sulfolobus solfataricus

The phosphotriesterase PTE, identified in the soil bacterium Pseudomonas diminuta, is thought to have evolved in the last several decades to degrade the pesticide paraoxon with proficiency approaching the limit of substrate diffusion (k(cat)/K(M) of 4 x 10(7)M(-1)s(-1)). It belongs to the amidohydrolase superfamily, but its evolutionary origin remains obscure. The enzyme has important potentiality in the field of the organophosphate decontamination. Recently we reported on the characterization of an archaeal member of the amidohydrolase superfamily, namely Sulfolobus solfataricus, showing low but significant and extremely thermostable paraoxonase activity (k(cat)/K(M) of 4 x 10(3)M(-1)s(-1)). Looking for other thermostable phosphotriesterases we assayed, among others, crude extracts of Sulfolobus acidocaldarius and detected activity. Since the genome of S. acidocaldarius has been recently reported, we identified there an open reading frame highly related to the S. solfataricus enzyme. The gene was cloned, the protein overexpressed in Escherichia coli, purified, and proven to have paraoxonase activity. A comparative analysis detected some significant differences between the two archaeal enzymes.     

Constitutive expression, purification and characterization of a phosphoglucomutase from Fusarium oxysporum

The phosphoglucomutase gene from a wild type Fusarium oxysporum strain (F3), was homologously expressed, under the control of the constitutive promoter of gpdA of Aspergillus nidulans. The transformant produced elevated levels of phosphoglucomutase activity compared to the wild type, a fact that facilitated the subsequent purification procedure. The enzyme (FoPGM) was purified to homogeneity applying three anion exchange and one gel filtration chromatography steps. The native enzyme revealed a monomeric structure with a molecular mass of 60 kDa, while the isoelectric point was 3.5. FoPGM was active in pH ranged from 6.0 to 8.0, with an optimum using 3-(N-morpholino)propanesulfonic acid buffer at 7.0, while loss of activity was observed when phosphate buffer was used in the above mentioned pH range. The optimal temperature for activity was 45°C but the enzyme became unstable at temperatures above 40°C. FoPGM requires the presence of a divalent cation for its function with maximum activity being obtained with Co(2+). The apparent K(m) for Co(2+) was found to be 10 μM. The enzyme was also active with other divalent metal ions such as Mn(2+), Mg(2+), Ni(2+) and Ca(2+) but to a lesser extent. The following kinetic constants were determined: v(max), 0.74 μmol mg(protein)(-1)min(-1); k(cat), 44.2 min(-1); K(m)(G1P), 0.10mM; K(m)(G1,6 diP), 1.03 μM; k(cat)/K(m)(G1P), 443 mM(-1)min(-1) and k(cat)/K(m)(G1,6 diP), 42,860 mM(-1)min(-1). The enzyme was considered to follow a Ping Pong substituted enzyme or enzyme isomerization mechanism.     

Quercetinase QueD of Streptomyces sp. FLA, a monocupin dioxygenase with a preference for nickel and cobalt

Quercetinase (QueD) of Streptomyces sp. FLA is an enzyme of the monocupin family and catalyzes the 2,4-dioxygenolytic cleavage of the flavonol quercetin. After expression of the queD gene in Escherichia coli, high specific QueD activity was found in crude cell extracts when the growth medium was supplemented with NiCl 2 or CoCl 2, but not when Mn (2+), Fe (2+), Cu (2+), or Zn (2+) was added. The metal occupancy of Ni- and Co-QueD purified from these cells was 相似文献   

PURIFICATION AND CHARACTERIZATION OF A PROTEINASE FROM THE PROBIOTIC Lactobacillus rhamnosus OXY

A proteinase produced by the human gastrointestinal isolate Lactobacillus rhamnosus strain OXY was identified and characterized. The prtR2 gene coding for proteinase activity was detected in the examined strain. The PCR primers used were constructed on the basis of the sequence of the prtR2 proteinase gene from Lactobacillus rhamnosus GG. The enzyme was purified by fast protein liquid chromatography (FPLC) using CM-Sepharose Fast Flow and Sephacryl S-300 columns. Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) showed that the enzyme had a relatively low molecular mass of 60 kD. Protease activity was observed at a pH range from 6.5 to 7.5 with optimum k (cat)/K (m) values at pH 7.0 and 40°C. Maximum proteolytic activity (59?U mL(-1)) was achieved after 48?hr of cultivation. The activity of the enzyme was inhibited only by irreversible inhibitors specific for serine proteinases (PMSF and 3,4-dichloro-isocumarine), suggesting that the enzyme was a serine proteinase. Proteinase activity was increased by Ca(2+) and Mg(2+), and inhibited by Cu(2+), Zn(2+), Cd(2+), and Fe(2+.).     

Purification and characterization of enzymes involved in the degradation of chemotactic N-formyl peptides

N-Formyl peptides are derived from proteolytic degradation/processing of bacterial and mitochondrial proteins and serve as potent chemoattractants for mammalian phagocytic leukocytes. A response to the chemotactic N-formyl peptides released by commensal bacteria in the gut region could be detrimental, leading to unwanted inflammation. Here, two enzymes that act sequentially to degrade N-formyl peptides were purified from the rat intestinal mucosal layer and biochemically characterized. The first enzyme cleaves chemotactic peptide f-MLF to release N-formylmethionine (f-Met) and dipeptide leucylphenylalanine, with a k(cat) value of 14 s(-)(1), a K(M) value of 0.60 mM, and a k(cat)/K(M) value of 22 500 M(-)(1) s(-)(1). In-gel tryptic digestion followed by mass spectral fingerprinting identified the protein as the alpha-N-acylpeptide hydrolase (or acylamino acid-releasing enzyme, EC 3.4.19.1). The second enzyme hydrolyzes N-formylmethionine into formate and methionine with a k(cat) value of 7.9 s(-)(1), a K(M) value of 3.1 mM, and a k(cat)/K(M) value of 2550 M(-)(1) s(-)(1). This protein was identified as the N-acylase IA (or N(alpha)-acyl-l-amino acid amidohydrolase, EC 3.5.1.14). Together, these two enzymes play a protective role in degrading bacterial and mitochondrial N-formylated peptides.     

Diffusion-limited component of reactions catalyzed by Bacillus cereus beta-lactamase I

The Bacillus cereus beta-lactamase I catalyzes the hydrolysis of a wide variety of penicillins and cephalosporins with values of k(cat)/K(m) varying over several orders of magnitude. The values of this parameter for the most reactive of these compounds, benzylpenicillin, I, and furylacryloyl-penicillin, II (k(cat)/K(m) = 2.43 x 10(7) M(-1) s(-1) and 2.35 x 10(7) M(-1) s(-1), respectively, at pH 7.0 in potassium phosphate buffer containing 0.17 M KCl, I(c) = 0.63, 25 degrees C) are decreased markedly by increasing viscosity in sucrose- or glycerol-containing buffers. The relative sensitivities to viscosity of k(cat)/K(m) values for I and for cephaloridine, III, were found to be virtually unchanged at pH 3.8 from those observed at pH 7.0. The differential effects of viscosity on the reactive vs. the sluggish [e.g., cephalothin (IV), k(cat)/K(m) = 1 x 10(4) M(-1) s(-1)] substrates support the contention that the rates of reaction of the former with the enzyme are in part diffusion controlled. Quantitative analysis gives values for the association rate constants, k(1), of 7.6 x 10(7) M(-1) s(-1), 4 x 10(7) M(-1) s(-1), and 1.1 x 10(7) M(-1) s(-1) for I, II, and III, respectively. As both reactive and sluggish substrates associate with the active site of the enzyme with relatively similar rate constants, the variation in k(cat)/K(m) values is primarily due to the variation in the partition ratios k(-1)/k(2), for the ES complex, which are 2.3, 0.77, and 30 for I, II, and III, respectively. The preceding analysis is based on direct application of the Stokes-Einstein diffusion law to enzyme kinetics. The range of applicability of this law to the diffusion of substrate size molecules and the mechanics of diffusion of ionic species through viscous solutions of sucrose vs. polymers are explored.     

Kinetic and spectroscopic characterization of the H178A methionyl aminopeptidase from Escherichia coli

To gain insight into the role of the strictly conserved histidine residue, H178, in the reaction mechanism of the methionyl aminopeptidase from Escherichia coli (EcMetAP-I), the H178A mutant enzyme was prepared. Metal-reconstituted H178A binds only one equivalent of Co(II) or Fe(II) tightly with affinities that are identical to the WT enzyme based on kinetic and isothermal titration calorimetry (ITC) data. Electronic absorption spectra of Co(II)-loaded H178A EcMetAP-I indicate that the active site divalent metal ion is pentacoordinate, identical to the WT enzyme. These data indicate that the metal binding site has not been affected by altering H178. The effect of altering H178 on activity is, in general, due to a decrease in k(cat). The k(cat) value for Co(II)-loaded H178A decreased 70-fold toward MGMM and 290-fold toward MP-p-NA compared to the WT enzyme, while k(cat) decreased 50-fold toward MGMM for the Fe(II)-loaded H178A enzyme and 140-fold toward MP-p-NA. The K(m) values for MGMM remained unaffected, while those for MP-p-NA increased approximately 2-fold for Co(II)- and Fe(II)-loaded H178A. The k(cat)/K(m) values for both Co(II)- and Fe(II)-loaded H178A toward both substrates ranged from approximately 50- to 580-fold reduction. The pH dependence of log K(m), log k(cat), and log(k(cat)/K(m)) of both WT and H178A EcMetAP-I were also obtained and are identical, within error, for H178A and WT EcMetAP-I. Therefore, H178A is catalytically important but is not required for catalysis. Assignment of one of the observed pK(a) values at 8.1 for WT EcMetAP-I was obtained from plots of molar absorptivity at lambda(max(640)) vs pH for both WT and H178A EcMetAP-I. Apparent pK(a) values of 8.1 and 7.6 were obtained for WT and H178A EcMetAP-I, respectively, and were assigned to the deprotonation of a metal-bound water molecule. The data reported herein provide support for the key elements of the previously proposed mechanism and suggest that a similar mechanism can apply to the enzyme with a single metal in the active site.     

Cloning and characterization of histamine dehydrogenase from Nocardioides simplex

Histamine dehydrogenase (NSHADH) can be isolated from cultures of Nocardioides simplex grown with histamine as the sole nitrogen source. A previous report suggested that NSHADH might contain the quinone cofactor tryptophan tryptophyl quinone (TTQ). Here, the hdh gene encoding NSHADH is cloned from the genomic DNA of N. simplex, and the isolated enzyme is subjected to a full spectroscopic characterization. Protein sequence alignment shows NSHADH to be related to trimethylamine dehydrogenase (TMADH: EC 1.5.99.7), where the latter contains a bacterial ferredoxin-type [4Fe-4S] cluster and 6-S-cysteinyl FMN cofactor. NSHADH has no sequence similarity to any TTQ containing amine dehydrogenases. NSHADH contains 3.6+/-0.3 mol Fe and 3.7+/-0.2 mol acid labile S per subunit. A comparison of the UV/vis spectra of NSHADH and TMADH shows significant similarity. The EPR spectrum of histamine reduced NSHADH also supports the presence of the flavin and [4Fe-4S] cofactors. Importantly, we show that NSHADH has a narrow substrate specificity, oxidizing only histamine (K(m)=31+/-11 microM, k(cat)/K(m)=2.1 (+/-0.4)x10(5)M(-1)s(-1)), agmatine (K(m)=37+/-6 microM, k(cat)/K(m)=6.0 (+/-0.6)x10(4)M(-1)s(-1)), and putrescine (K(m)=1280+/-240 microM, k(cat)/K(m)=1500+/-200 M(-1)s(-1)). A kinetic characterization of the oxidative deamination of histamine by NSHADH is presented that includes the pH dependence of k(cat)/K(m) (histamine) and the measurement of a substrate deuterium isotope effect, (D)(k(cat)/K(m) (histamine))=7.0+/-1.8 at pH 8.5. k(cat) is also pH dependent and has a reduced substrate deuterium isotope of (D)(k(cat))=1.3+/-0.2.     

The variation of catalytic efficiency of Bacillus cereus metallo-beta-lactamase with different active site metal ions

The kinetics and mechanism of hydrolysis of the native zinc and metal substituted Bacillus cereus (BcII) metallo-beta-lactamase have been investigated. The pH and metal ion dependence of k(cat) and k(cat)/K(m), determined under steady-state conditions, for the cobalt substituted BcII catalyzed hydrolysis of cefoxitin, cephaloridine, and cephalexin indicate that an enzyme residue of apparent pK(a) 6.3 +/- 0.1 is required in its deprotonated form for metal ion binding and catalysis. The k(cat)/K(m) for cefoxitin and cephalexin with cadmium substituted BcII is dependent on two ionizing groups on the enzyme: one of pK(a1) = 8.7 +/- 0.1 required in its deprotonated form and the other of pK(a2) = 9.3 +/- 0.1 required in its protonated form for activity. The pH dependence of the competitive inhibition constant, K(i), for CdBcII with l-captopril indicates that pK(a1) = 8.7 +/- 0.1 corresponds to the cadmium-bound water. For the manganese substituted BcII, the pH dependence of k(cat)/K(m) for benzylpenicillin, cephalexin, and cefoxitin similarly indicated the importance of two catalytic groups: one of pK(a1) = 8.5 +/- 0.1 which needs to be deprotonated and the other of pK(a2) = 9.4 +/- 0.1 which needs to be protonated for catalysis; the pK(a1) was assigned to the manganese-bound water. The rate was metal ion concentration dependent at the highest manganese concentrations used (10(-)(3) M). The metal substituted species have similar or higher catalytic activities compared with the zinc enzyme, albeit at pHs above 7. Interestingly, with cefoxitin, a very poor substrate for ZnBcII, both k(cat) and k(cat)/K(m) increase with increasing pK(a) of the metal-bound water, in the order Zn < Co < Mn < Cd. A higher pK(a) for the metal-bound water for cadmium and manganese BCII leads to more reactive enzymes than the native zinc BcII, suggesting that the role of the metal ion is predominantly to provide the nucleophilic hydroxide, rather than to act as a Lewis acid to polarize the carbonyl group and stabilize the oxyanion tetrahedral intermediate.     

Characteristics of a new enantioselective thermostable dipeptidase from Brevibacillus borstelensis BCS-1 and its application to synthesis of a D-amino-acid-containing dipeptide

A new thermostable dipeptidase gene was cloned from the thermophile Brevibacillus borstelensis BCS-1 by genetic complementation of the D-Glu auxotroph Escherichia coli WM335 on a plate containing D-Ala-D-Glu. Nucleotide sequence analysis revealed that the gene included an open reading frame coding for a 307-amino-acid sequence with an M(r) of 35,000. The deduced amino acid sequence of the dipeptidase exhibited 52% similarity with the dipeptidase from Listeria monocytogenes. The enzyme was purified to homogeneity from recombinant E. coli WM335 harboring the dipeptidase gene from B. borstelensis BCS-1. Investigation of the enantioselectivity (E) to the P(1) and P(1)' site of Ala-Ala revealed that the ratio of the specificity constant (k(cat)/K(m)) for L-enantioselectivity to the P(1) site of Ala-Ala was 23.4 +/- 2.2 [E = (k(cat)/K(m))(L,D)/(k(cat)/K(m))(D,D)], while the D-enantioselectivity to the P(1)' site of Ala-Ala was 16.4 +/- 0.5 [E = (k(cat)/K(m))(L,D)/(k(cat)/K(m))(L,L)] at 55 degrees C. The enzyme was stable up to 55 degrees C, and the optimal pH and temperature were 8.5 and 65 degrees C, respectively. The enzyme was able to hydrolyze L-Asp-D-Ala, L-Asp-D-AlaOMe, Z-D-Ala-D-AlaOBzl, and Z-L-Asp-D-AlaOBzl, yet it could not hydrolyze D-Ala-L-Asp, D-Ala-L-Ala, D-AlaNH(2), and L-AlaNH(2.) The enzyme also exhibited beta-lactamase activity similar to that of a human renal dipeptidase. The dipeptidase successfully synthesized the precursor of the dipeptide sweetener Z-L-Asp-D-AlaOBzl.     

Evidence for nonbridged coordination of p-nitrophenyl phosphate to the dinuclear Fe(III)-M(II) center in bovine spleen purple acid phosphatase during enzymatic turnover.

The pH dependence of the catalytic parameters k(cat) and K(M) has been determined for the Fe(III)Fe(II)- and Fe(III)Zn(II)-forms of bovine spleen purple acid phosphatase (BSPAP). The parameter k(cat) was found to be maximal at pH 6.3, and a pK(a) of 5.4-5.5 was obtained for the acidic limb of the k(cat) vs pH profile. Two different EPR spectra were detected for the phosphate complex of the mixed-valent diiron enzyme; their relative amounts depended on the pH, with an apparent pK(a) of 6. The EPR spectra of Fe(III)Fe(II)-BSPAP.PO(4) and Fe(III)Zn(II)-BSPAP.PO(4) at pH 5.0 are similar to those previously reported for Fe(III)Fe(II)-Uf.PO(4) and Fe(III)Zn(II)-Uf.PO(4) complexes at pH 5.0. At higher pH, a new Fe(III)Fe(II)-BSPAP.PO(4) species is formed, with apparent g-values of 1.94, 1.71, and 1.50. The EPR spectrum of Fe(III)Zn(II)-BSPAP does not show significant changes upon addition of phosphate up to 30 mM at pH 6.5, suggesting that phosphate binds only to the spectroscopically silent Zn(II). To determine whether the phosphate complexes were good structural models for the enzyme substrate complexes, these complexes were studied using rapid-freeze EPR and stopped-flow optical spectroscopy. The stopped-flow studies showed the absence of burst kinetics at pH 7.0, which indicates that substrate hydrolysis is rate limiting, rather than phosphate release. The EPR spectrum of Fe(III)Fe(II)-BSPAP.p-NPP is similar, but not identical, to that of the corresponding phosphate complex, both at pH 5 and pH 6.5. We propose that both phosphate and p-NPP bridge the two metal ions at low pH. At higher pH where the enzyme is optimally active, we propose that hydroxide competes with phosphate and p-NPP for coordination to Fe(III) and that both phosphate and p-NPP coordinate only to the divalent metal ion.     

Induction of Adenosine Deaminase in Escherichia coli

Supplementing the salts-glucose medium of Escherichia coli with adenine initiates induction of adenosine deaminase (adenosine aminohydrolase, EC 3.5.4.4), growth inhibition, and an increased potential for the net deamination of adenine. The extent and duration of these events are proportional to the initial adenine concentration and are dependent upon adenylate pyrophosphorylase and repression of histidine biosynthesis for maximal expression. The conversion of adenine to hypoxanthine, though limited in rate, occurs concurrently with induction and accounts for the progressively decreasing rate of deaminase induction, since hypoxanthine is a relatively ineffective inducer. The subsequent decrease in deaminase activity is due to dilution by continued cell division and by enzyme inactivation which occurs during the late-log and early-stationary phases. The partially purified deaminase is labile to a number of environmental conditions, particularly to phosphate buffers of pH 6.8 or less. A disproportionately slow rate of adenine deamination by cells utilizing lactate permits a more prolonged period of induction and, consequently, a greater quantity of enzyme to be synthesized; cell division, but not enzyme inactivation, reduces enzyme concentration. The adenosine deaminases of Aerobacter aerogenes and Salmonella typhimurium are not inducible.     

Cloning, expression, and characterization of tomato (Lycopersicon esculentum) aminopeptidase P.

A cDNA (LeAPP2) was cloned from tomato coding for a 654 amino acid protein of 72.7 kDa. The deduced amino acid sequence was >40% identical with that of mammalian aminopeptidase P, a metalloexopeptidase. All amino acids reported to be important for binding of the active site metals and catalytic activity, respectively, were conserved between LeAPP2 and its mammalian homologues. LeAPP2 was expressed in Escherichia coli in N-terminal fusion with glutathione S-transferase and was purified from bacterial extracts. LeAPP2 was verified as an aminopeptidase P, hydrolyzing the amino-terminal Xaa-Pro bonds of bradykinin and substance P. LeAPP2 also exhibited endoproteolytic activity cleaving, albeit at a reduced rate, the internal -Phe-Gly bond of substance P. Apparent K(m) (15.2 +/- 2.4 microm) and K(m)/k(cat) (0.94 +/- 0.11 mm(-1) x s(-1)) values were obtained for H-Lys(Abz)-Pro-Pro-pNA as the substrate. LeAPP2 activity was maximally stimulated by addition of 4 mm MnCl(2) and to some extent also by Mg(2+), Ca(2+), and Co(2+), whereas other divalent metal ions (Cu(2+), Zn(2+)) were inhibitory. Chelating agents and thiol-modifying reagents inhibited the enzyme. The data are consistent with LeAPP2 being a Mn(II)-dependent metalloprotease. This is the first characterization of a plant aminopeptidase P.     

Structural studies on a mitochondrial glyoxalase II

Glyoxalase 2 is a beta-lactamase fold-containing enzyme that appears to be involved with cellular chemical detoxification. Although the cytoplasmic isozyme has been characterized from several organisms, essentially nothing is known about the mitochondrial proteins. As a first step in understanding the structure and function of mitochondrial glyoxalase 2 enzymes, a mitochondrial isozyme (GLX2-5) from Arabidopsis thaliana was cloned, overexpressed, purified, and characterized using metal analyses, EPR and (1)H NMR spectroscopies, and x-ray crystallography. The recombinant enzyme was shown to bind 1.04 +/- 0.15 eq of iron and 1.31 +/- 0.05 eq of Zn(II) and to exhibit k(cat) and K(m) values of 129 +/- 10 s(-1) and 391 +/- 48 microm, respectively, when using S-d-lactoylglutathione as the substrate. EPR spectra revealed that recombinant GLX2-5 contains multiple metal centers, including a predominant Fe(III)Z-n(II) center and an anti-ferromagnetically coupled Fe(III)Fe(II) center. Unlike cytosolic glyoxalase 2 from A. thaliana, GLX2-5 does not appear to specifically bind manganese. (1)H NMR spectra revealed the presence of at least eight paramagnetically shifted resonances that arise from protons in close proximity to a Fe(III)Fe(II) center. Five of these resonances arose from solvent-exchangeable protons, and four of these have been assigned to NH protons on metal-bound histidines. A 1.74-A resolution crystal structure of the enzyme revealed that although GLX2-5 shares a number of structural features with human GLX2, several important differences exist. These data demonstrate that mitochondrial glyoxalase 2 can accommodate a number of different metal centers and that the predominant metal center is Fe(III)Zn(II).     

Product release is rate-limiting in the activation of the prodrug 5-fluorocytosine by yeast cytosine deaminase

Yeast cytosine deaminase (yCD), a zinc metalloenzyme, catalyzes the hydrolytic deamination of cytosine to uracil. The enzyme is of great biomedical interest because it also catalyzes the deamination of the prodrug 5-fluorocytosine (5FC) to form the anticancer drug 5-fluorouracil (5FU). yCD/5FC is one of the most widely used enzyme/prodrug combinations for gene-directed enzyme prodrug therapy for the treatment of cancers. A pH indicator assay has been developed for the measurement of the steady-state kinetic parameters for the deamination reaction. Transient kinetic studies have shown that the product release is a rate-limiting step in the activation of the prodrug 5FC by yCD. The rate constant of the chemical step for the forward reaction (250 s(-)(1)) is approximately 8 times that of the product release (31 s(-)(1)) and approximately 15 times k(cat) (17 s(-)(1)). The transient kinetic results are consistent with those of the steady-state kinetic analysis in the sense that the k(cat) and K(m) values calculated from the rate constants determined by the transient kinetic analysis are in close agreement with those measured by the steady-state kinetic analysis. NMR experiments have demonstrated that free 5FU is in slow exchange with its complex with yCD but has a low affinity for yCD. The transient kinetic and NMR results together suggest that the release of 5FU is rate-limiting in the activation of the prodrug 5FC by yCD and may involve multiple steps.