Spreading and mutability ofSelenomonas ruminantium plasmids

Two small plasmids from Selenomonas ruminantium strain 19D were cloned in Escherichia coli and completely characterized. Sequence comparison indicated that the plasmids are similar to those reported in genetically vaguely related S. ruminantium strain S20. Small 1.4-kb plasmids pSRD191 and pONE430 are only distantly related (approximately 30 % for deduced Rep protein amino acid sequence) but possess a short highly conserved region outside rep gene. Larger plasmids pSRD192 and pONE429 possess large identical DNA regions in an otherwise dissimilar background. Recombination is proposed as an important mechanism of evolution and spreading of S. ruminantium plasmids.     

Construction of a new Streptococcus pneumoniae-Escherichia coli shuttle vector based on the replicon of an indigenous pneumococcal cryptic plasmid.

The nucleotide sequence of a cryptic plasmid (pRMG1) isolated from a type 1 Streptococcus pneumoniae has been determined and two recombinant plasmids, pRMGE1 and pRMGE2, bearing the pRMG1 replicon have been constructed. pRMGE2 is a shuttle vector for Escherichia coli and S. pneumoniae. The important characteristics of this cloning vector are: a size of 5.5 kb including a 1.4 kb fragment of pRMG1 (containing a double-stranded replication origin and an open reading frame encoding a putative replication initiation protein), a multicloning site, two antibiotic resistance markers for selection of plasmid containing cells, and blue-white colony screening in E. coli for identification of insert-containing plasmids.     

Characterization of a plasmid from Helicobacter pylori encoding a replication protein common to plasmids in Gram-positive bacteria

A 1.5 kb cryptic plasmid was isolated from Helicobacter pylori. Low-stringency hybridization analysis using this plasmid as a DNA probe revealed base sequence homology with other plasmids in this species. Nucleotide sequence analysis identified an open reading frame encoding a putative polypeptide of 25 kDa. This protein showed marked amino acid sequence similarity to replication-initiation proteins commonly found in small plasmids endogenous to Gram-positive bacteria which replicate by the 'rolling-circle' mechanism. Sequence motifs corresponding to the origins-of-replication consensus sequences were found on this cryptic plasmid. DNA and oligonucleotide probes to these plasmid replication sequences were used in hybridization analysis to identify similar sequences in other H. pylori plasmids. We believe this is the first plasmid isolated from a Gram-negative bacterium to show replication determinants characteristic of the 'rolling-circle' group of plasmids from Gram-positive bacteria. The cloned plasmid will be used to develop a shuttle-vector for H. pylori.     

Characterisation of a novel plasmid p9785S from Lactobacillus johnsonii FI9785

Lactobacillus johnsonii FI9785, a strain originally isolated from poultry gastrointestinal tract for its probiotic function as a competitive excluder of pathogens, was found to contain two cryptic plasmids of 3.5 and 25.6 kb. Nucleotide sequence analysis of the entire small plasmid, designated p9785S (3471 bp), indicated a G+C content of 35.8%, and revealed two open reading frames (orfs). The product of orf1 exhibited similarity to the relaxases of mobilizable plasmids, whereas the product of orf2 displayed significant homology to replication proteins of plasmids which use the rolling circle mode of replication. A conserved double-strand origin of replication was also present in p9785S. A definite minus origin was not identified although a region with extensive intrastrand base pairing potential was revealed. A 1.4 kb fragment encoding the chloramphenicol resistance gene was cloned into p9785S and the resulting vector, pFI2431, was stably maintained when introduced into the parent Lactobacillus cells.     

Isolation and characterization of antibiotic-resistance plasmids in thermophilic bacilli

Four antibiotic-resistance plasmids isolated from thermophilic bacilli were characterized in detail. Three tetracycline-resistance (Tc1) plasmids were designated as pTHT9 (7.7 kilobases (kb], pTHT15 (4.5 kb) and pTHT22 (8.4 kb). From the results of restriction endonuclease analysis and the subsequent Southern hybridization, these were found to possess extensive genetic homology in the regions that include the replication origin and the Tcr gene. Detailed restriction maps of the smallest Tcr plasmid pTHT15 and a kanamycin-resistance (Kmr) plasmid pTHN1 (4.8 kb) were constructed. The positions of antibiotic-resistance loci and regions essential for plasmid replication were determined by cloning plasmid fragments in Bacillus subtilis. These four plasmids were found to replicate and express the resistance genes stably in both B. subtilis and B. stearothermophilus.     

Comparative analyses of two cryptic plasmids from Haemophilus somnus (Histophilus somni)

Haemophilus somnus is an opportunistic bacterial pathogen capable of causing pneumonia, septicemia, and other systemic infections in bovines. An H. somnus isolate from bovine abortion (strain 649) was found to carry a approximately 1.3 kb plasmid (pHS649) that contained partial homology to two previously sequenced Haemophilus/Histophilus plasmids by BLAST analyses. Sequence analysis of pHS649 identified a putative RepA protein with 48% similarity to the RepA protein of Escherichia coli plasmid pKL1. A approximately 5 kb plasmid (pHS129) from H. somnus preputial isolate 129Pt was also sequenced and found to encode two copies of a putative RepB protein. Whereas pHS649 stably replicated in E. coli DH5alpha, pHS129 did not. Genetic relatedness and possible replication mechanisms of these plasmids are described.     

Influence of different functional elements of plasmid pGT232 on maintenance of recombinant plasmids in Lactobacillus reuteri populations in vitro and in vivo

Plasmid pGT232 (5.1 kb), an indigenous plasmid of Lactobacillus reuteri 100-23, was determined, on the basis of nucleotide and deduced protein sequence data, to belong to the pC194-pUB110 family of plasmids that replicate via the rolling-circle mechanism. The minimal replicon of pGT232 was located on a 1.7-kb sequence consisting of a double-strand origin of replication and a gene encoding the replication initiation protein, repA. An erythromycin-selectable recombinant plasmid containing this minimal replicon was stably maintained (>97% erythromycin-resistant cells) without antibiotic selection in an L. reuteri population under laboratory growth conditions but was poorly maintained (<33% resistant cells) in the L. reuteri population inhabiting the murine gastrointestinal tract. Stable maintenance (>90% resistant cells) of pGT232-derived plasmids in the lactobacillus population in vivo required an additional 1.0-kb sequence which contained a putative single-strand replication origin (SSO). The SSO of pGT232 is believed to be novel and functions in an orientation-specific manner.     

Nucleotide sequence based characterizations of two cryptic plasmids from the marine bacterium Ruegeria isolate PR1b

Two plasmids, 76 and 148 kb in size, isolated from Ruegeria strain PR1b were entirely sequenced. These are the first plasmids to be characterized from this genus of marine bacteria. Sequence analysis revealed a biased distribution of function among the putative proteins encoded on the two plasmids. The smaller plasmid, designated pSD20, encodes a large number of putative proteins involved in polysaccharide biosynthesis and export. The larger plasmid, designated pSD25, primarily encodes putative proteins involved in the transport of small molecules and in DNA mobilization. Sequence analysis revealed uncommon potential replication systems on both plasmids. pSD25, the first repABC-type replicon isolated from the marine environment, actually contains two repABC-type replicons. pSD20 contains a complex replication region, including a replication origin and initiation protein similar to iteron-containing plasmids (such as pSW500 from the plant pathogen Erwinia stewartii) linked to putative RepA and RepB stabilization proteins of a repABC-type replicon and is highly homologous to a plasmid from the phototrophic bacterium Rhodobacter sphaeroides. Given the nature of the putative proteins encoded by both plasmids it is possible that these plasmids enhance the metabolic and physiological flexibility of the host bacterium, and thus its adaptation to the marine sediment environment.     

Replication of the Streptomyces plasmid pSN22 through single-stranded intermediates

The replication of the 11 kb conjugative multicopy Streptomyces plasmid pSN22 was analyzed. Mutation and complementation analyses indicated that the minimal region essential for plasmid replication was located on a 1.9 kb fragment of pSN22, containing a trans-acting element encoding a replication protein and a cis-acting sequence acting as a replication origin. Southern hybridization showed that minimal replicon plasmids accumulated much more single-stranded plasmid molecules than did wild-type pSN22. Only one strand was accumulated. A 500 by fragment from the pSN22 transfer region was identified which reduced the relative amount of single-stranded DNA, when added in the native orientation to minimal replicon plasmids. This 500 by DNA sequence may be an origin for second-strand synthesis. It had no effect on the efficiency of co-transformation, plasmid incompatibility, or stability. The results indicate that pSN22 replicates via single-stranded intermediates by a rolling circle mechanism.     

Molecular characterization of <Emphasis Type="Italic">Bifidobacterium longum</Emphasis> biovar <Emphasis Type="Italic">longum</Emphasis> NAL8 plasmids and construction of a novel replicon screening system

In this study, we performed molecular characterization and sequence analysis of three plasmids from the human intestinal isolate Bifidobacterium longum biovar longum NAL8 and developed a novel vector screening system. Plasmids pNAL8H (10 kb) and pNAL8M (4.9 kb) show close sequence similarity to and the same gene organization as the already characterized B. longum plasmids. The B. longum plasmid pNAC1 was identified as being most closely related to pNAL8L (3.5 kb). However, DNA sequence analysis suggested that direct repeat-rich sites could have promoted several recombination events to diversify the two plasmid molecules. We verified the likely rolling circle replication of plasmid pNAL8L and studied the phylogenetic relationship in all the Bifidobacterium plasmids fully sequenced to date based on in silico comparative sequence analysis of their replication proteins and iteron regions. Our transformation experiments confirmed that the ColE1 replication origin from high-copy-number pUC vectors could interfere with the replication apparatus of Bifidobacterium plasmids and give rise to false positive clones. As a result, we developed a system suitable for avoiding possible interference by other functional replication modules on the vector and for screening functional replicons from wild-type plasmids. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users only.     

Replication of the Streptomyces plasmid pSN22 through single-stranded intermediates

The replication of the 11 kb conjugative multicopy Streptomyces plasmid pSN22 was analyzed. Mutation and complementation analyses indicated that the minimal region essential for plasmid replication was located on a 1.9 kb fragment of pSN22, containing a trans-acting element encoding a replication protein and a cis-acting sequence acting as a replication origin. Southern hybridization showed that minimal replicon plasmids accumulated much more single-stranded plasmid molecules than did wild-type pSN22. Only one strand was accumulated. A 500 by fragment from the pSN22 transfer region was identified which reduced the relative amount of single-stranded DNA, when added in the native orientation to minimal replicon plasmids. This 500 by DNA sequence may be an origin for second-strand synthesis. It had no effect on the efficiency of co-transformation, plasmid incompatibility, or stability. The results indicate that pSN22 replicates via single-stranded intermediates by a rolling circle mechanism.     

The integrated state of the rolling-circle plasmid pTB913 in the composite Bacillus plasmid pTB19.

Summary pTB19, a 27 kb plasmid originating from a thermophilic Bacillus species, contains integrated copies of two rolling-circle type plasmids on a 10.6 kb DNA fragment. In the present study we analysed the part of pTB19 that contains the rolling-circle plasmid pTB913 and the region in between the two rolling-circle plasmids. We show that, in the integrated state, pTB913 was flanked by a 55 by direct repeat that duplicated part of the replication initiation gene repB. Since repB was interrupted, the integrated pTB913 could not initiate rolling-circle replication. Autonomously replicating pTB913 was produced from pTB19, probably through recombination between the 55 by direct repeats; this was a rare event. Since the second integrated rolling-circle type plasmid also contained a non-functional replication initiation gene, replication of pT1319 must be controlled by the RepA determinant. Theta-type replication, controlled by RepA is likely to account for the high stability of pTB19. In between the two integrated rolling-circle plasmids was present an open reading frame (447 codons) which could encode a protein of unknown function.     

Comparative analysis of staphylococcal plasmids carrying three streptogramin-resistance genes: vat-vgb-vga.

Several staphylococcal plasmids (26-45 kb) carry all three streptogramin-resistance (Sg(R)) genes, vat, vgb, and vga. Seven such plasmids harbored by independent strains belonging to three taxa (Staphylococcus aureus, S. simulans, and S. cohnii subsp. urealyticum) were compared and the deleted derivative of one of them, pIP680 (11.3 kb), carrying the three streptogramin-resistance genes was sequenced. The seven native plasmids had in common a 12.1-kb part cocarrying the three Sg(R) genes. Sequence analysis of pIP680 revealed that the simultaneous presence of these three genes has probably resulted from cointegration of two plasmids: (i) a pAMbeta1-like plasmid harboring vat-vgb and whose replication gene has been inactivated by an IS257 insertion and (ii) a functional vga plasmid whose replication is similar to that of two staphylococcal plasmids, pSX267 and pSK41.     

Influence of Different Functional Elements of Plasmid pGT232 on Maintenance of Recombinant Plasmids in Lactobacillus reuteri Populations In Vitro and In Vivo

Plasmid pGT232 (5.1 kb), an indigenous plasmid of Lactobacillus reuteri 100-23, was determined, on the basis of nucleotide and deduced protein sequence data, to belong to the pC194-pUB110 family of plasmids that replicate via the rolling-circle mechanism. The minimal replicon of pGT232 was located on a 1.7-kb sequence consisting of a double-strand origin of replication and a gene encoding the replication initiation protein, repA. An erythromycin-selectable recombinant plasmid containing this minimal replicon was stably maintained (>97% erythromycin-resistant cells) without antibiotic selection in an L. reuteri population under laboratory growth conditions but was poorly maintained (<33% resistant cells) in the L. reuteri population inhabiting the murine gastrointestinal tract. Stable maintenance (>90% resistant cells) of pGT232-derived plasmids in the lactobacillus population in vivo required an additional 1.0-kb sequence which contained a putative single-strand replication origin (SSO). The SSO of pGT232 is believed to be novel and functions in an orientation-specific manner.     

Presence of a family of plasmids (29 to 65 kilobases) with a 26-kilobase common region in different strains of the sulfur-oxidizing bacterium Acidithiobacillus caldus

Three large cryptic plasmids from different isolates of Acidithiobacillus caldus were rescued by using an in vitro transposition system that delivers a kanamycin-selectable marker and an Escherichia coli plasmid origin of replication. The largest of the plasmids, the 65-kb plasmid pTcM1, was isolated from a South African A. caldus strain, MNG. This plasmid was sequenced and compared to that of pTcF1 (39 kb, from strain "f," South Africa) and pC-SH12 (29 kb, from strain C-SH12, Australia). With the exception of a 2.7-kb insertion sequence, pC-SH12 appears to represent the DNA common to all three plasmids and includes a number of accessory genes plus the plasmid "backbone" containing the replication region. The two larger plasmids carry, in addition, a number of insertion sequences of the ISL3 family and a composite transposon related to the Tn21 subfamily containing a highly mosaic region within the borders of the inverted repeats. Genes coding for arsenic resistance, plasmid mobilization, plasmid stability, and a putative restriction-modification system occur within these mosaic regions.     

Identification and characterization of a shuttle plasmid with antibiotic resistance gene from Staphylococcus aureus

While studying antibiotic-resistant plasmids from multi-drug-resistant nosocomial Staphylococcus aureus strains, we isolated a small (2.889 kb) chloramphenicol-resistant (Cm(r)) plasmid, which was designated as pMC524/MBM. The molecular size of pMC524/MBM was close to that of pC194 (2.910 kb), a well-known Cm(r) staphylococcal plasmid. Unlike pC194, this plasmid can replicate and express itself efficiently and stably in Escherichia coli. However, Cm is needed for stable maintenance of pMC524/MBM in different hosts. In this study, the nucleotide sequences of these two plasmids were compared after sequencing of pMC524/MBM [EMBL Accession No. AJ312056 SAU312056]. Although these two plasmids have striking nucleotide sequence homology, the Plus Origin, Minus Origin, the replication protein (Rep), and the chloramphenicol acetyl transferase (Cat) have considerable variations. Possibly, these changes have modulated pMC524/MBM into an efficient shuttle-plasmid.