Growth orientation of heart cells on nylon monofilament

Summary A new method is described for orienting the growth of embryonic chick heart cells as thin annuli about nylon monofilament. Analytical measurements of cell water, intracellular potassium, cell volume, and cell surface area incorporate several new techniques and provide the quantitative basis for characterizing the respective cell types in the preparation. The measurements support the hypothesis that tissue culture methodology does not alter the morphological and physiological properties of cardiac muscle cells. The preparations are ideally suited for radiotracer studies since tissue mass can be increased while retaining a relatively short diffusional distance.     

Preparation of cells from paraffin-embedded tissue for cytometry and cytomorphologic evaluation

A method is described for the preparation of monolayer smears from paraffin-embedded tissue. The smears are suitable for automated image analysis and DNA measurements while still allowing interpretation of nuclear morphology. The proposed technique uses enzyme treatment and syringing for cell dispersal. The preparation of cell monolayers is performed by cytocentrifugation. After staining the specimens with gallocyanin, nuclear DNA can be measured. Automated DNA measurements using the Leyden Television Analysis System (LEYTAS) showed coefficients of variation of 4.5% for the diploid cell population of suspended benign tissue. After DNA measurements, the specimens are counterstained using orange G and eosin. Since gallocyanin has spectral properties similar to those of hematoxylin, the obtained end product is comparable to specimens stained according to the routinely used Papanicolaou procedure. Using this technique, image cytometry can be applied to paraffin-embedded tissue in combination with conventional cytomorphologic study of the cells.     

Fast quantification of immunohistochemistry tissue microarrays in lung carcinoma

Tissue microarrays (TMAs) are an effective tool for high-throughput molecular analysis of tissues to help identify new diagnostic and prognostic markers and targets in human cancers. We have developed a fully automated method for rapid, continuous and quantitative analysis of TMAs based on immunohistochemistry. The method deals with complex and varying tissue architectures, segments tumour cells from normal cells, conducts cell compartmentalisation, identifies nuclei and cytoplasm and produces three different continuous measurements of marker expression levels within tumour cell nuclei, tumour cell cytoplasm and total tumour cell protein expression. We have demonstrated this method using three independent protein markers (BAK, BAX and a novel biomarker, named KS) over 7 TMAs, involving 2 BAK stained TMAs with 229 tumour tissue cores, 2 BAX stained TMAs with 229 tumour tissue cores and 3 KS stained TMAs with 373 tumour cores of lung carcinomas. We validated the automated method, showing that the automated scoring is significantly correlated with the pathologist-based scoring.     

Computerized Determination of Adipocyte Size

Objective: Fat cell size is a fundamental parameter in the study of adipose tissue metabolism, because it markedly influences the cellular rates of metabolism. Previous techniques for the sizing of adipocytes are often complicated or time‐consuming. The aim of this study was to develop a new, computerized method for rapid and accurate determination of adipocyte size in a cell suspension obtained by incubating human or rat adipose tissue biopsies with collagenase. Research Methods and Procedures: The cell suspension was placed between a siliconized glass slide and a cover slip. Using the reference method [designated as (R)], the cell diameters were determined manually using a microscope with a calibrated ocular. The new method presented here [designated as (C)] was based on computerized image analysis. Results: After two well‐defined corrective adjustments, measurements with (R) and (C) agreed very well. The small remaining differences seemed, in fact, to depend on inconsistencies in (R). Discussion: We propose that (C) constitutes a valuable tool to study fat cell size, because this method is fast and allows the assessment of a sufficient number of cells to get reliable data on size distribution. Furthermore, images of cell preparations may be stored for future reference.     

Improved Methods for the Measurement of Total Cell Surface Area in Leaf Mesophyll Tissue

Two improved methods are described for the measurement of thetotal surface area of mesophyll cells in leaf tissue. The firstinvolves stereological measurements on suspensions of enzymicallyisolated mesophyll cells; the second involves measurements ofthe total perimeter of mesophyll cell profiles on transversesections of the leaf, with allowance for curvature of the cellsurfaces by means of theoretically based correction factors.Application of the two methods to the mesophyll tissue of tobaccoleaves gave results which were in very good agreement with eachother. Both methods avoid the inaccuracies and uncertaintiesof previous methods for measurement of mesophyll cell surfaceareas. Key words: Mesophyll, Surface: Area     

Osteogenic differentiation of preconditioned bone marrow mesenchymal stem cells with lipopolysaccharide on modified poly-l-lactic-acid nanofibers

Tissue engineering is an interdisciplinary expertise that involves the use of nanoscaffolds for repairing, modifying, and removing tissue defects and formation of new tissues. Mesenchymal stem cells (MSCs) can differentiate into a variety of cell types, and they are attractive candidates for tissue engineering. In the current study, the electrospinning process was used for nanofiber preparation, based on a poly-l -lactic-acid (PLLA) polymer. The surface was treated with O ₂ plasma to enhance hydrophilicity, cell attachment, growth, and differentiation potential. The nanoscaffolds were preconditioned with lipopolysaccharide (LPS) to enhance induction of differentiation. The nanoscaffolds were categorized by contact angle measurements and scanning electron microscopy. The MTT assay was used to analyze the rate of growth and proliferation of cells. Osteogenic differentiation of cultured MSCs was evaluated on nanofibers using common osteogenic markers, such as alkaline phosphatase activity, calcium mineral deposition, quantitative real-time polymerase chain reaction, and immunocytochemical analysis. Based on the in vitro results, primed MSCs with LPS on the PLLA nanoscaffold significantly enhanced the proliferation and osteogenesis of MSCs. Also, the combination of LPS and electrospun nanofibers can provide a new and suitable matrix to support stem cells’ differentiation for bone tissue engineering.     

Preparation of monolayer smears from paraffin-embedded tissue for image cytometry

A method is described for the preparation of monolayer smears from paraffin-embedded tissue suitable for automated image analysis and DNA measurements. The proposed technique uses enzyme treatment and syringing for cell dispersal. Slide preparation is performed by centrifugal cytology. After Feulgen staining the quality of the monolayer smears is sufficiently high to enable visual morphologic evaluation. Automated DNA measurements using the Leyden television analysis system (LEYTAS) show coefficients of variation (CV) of 4.5% for the diploid cell population of the suspended tissue. This is approximately the same as the CV in fresh material from the same tumor. Formalin fixed trout red blood cells are used as reference cells. By applying image cytometry to paraffin-embedded tissue this method allows retrospective studies of, for instance, the significance of DNA content with regard to the behavior of a tumor.     

Various seeding methods for tissue development of human umbilical-cord-derived mesenchymal stem cells in 3-dimensional PET matrix

Mesenchymal stem cells derived from human umbilical cords (hUCMSCs) are attractive as a new cell source for tissue engineering. It is essential to investigate and optimize the seeding process of these cells for the success of cell culture and tissue regeneration in vitro. In this study, a static seeding method (SSM), a centrifugal seeding method (CSM), and a novel method-cycling filtration seeding method (CFSM) are evaluated in terms of seeding efficiency, cell damage, and distribution inside the scaffolds, cell proliferation, and osteogenic differentiation. Cells were seeded on three-dimensional (3-D) nonwoven PET discs at a density of 1×10⁴ cells/disc, followed by 21 days of cell culture and 20 days of osteogenic differentiation. Cells grown in 3-D conditions exhibited higher metabolic activity than those grown on a 2-D control surface. The CSM and CFSM groups showed higher seeding efficiency, proliferation capacity, and differentiation potential. H&E staining indicated a more uniform spatial distribution of cells in CFSM groups. LDH level measurements suggested that more cell damage was caused by the CFSM process. Above all, the results showed that the cells maintained their proliferation ability and differentiation potential ex vivo during approximately 7 weeks of culture. The CSM and CFSM are recommended for hUCMSC tissue engineering, although the seeding parameters still require further investigation and optimization.     

Transient Responses of Cell Turgor and Growth of Maize Roots as Affected by Changes in Water Potential

Transient responses of cell turgor (P) and root elongation to changes in water potential were measured in maize (Zea mays L.) to evaluate mechanisms of adaptation to water stress. Changes of water potential were induced by exposing roots to solutions of KCl and mannitol (osmotic pressure about 0.3 MPa). Prior to a treatment, root elongation was about 1.2 mm h-1 and P was about 0.67 MPa across the cortex of the expansion zone (3-10 mm behind the root tip). Upon addition of an osmoticum, P decreased rapidly and growth stopped completely at pressure below approximately 0.6 MPa, which indicated that the yield threshold (Ytrans,1) was just below the initial turgor. Turgor recovered partly within the next 30 min and reached a new steady value at about 0.53 MPa. The root continued to elongate as soon as P rose above a new threshold (Ytrans,2) of about 0.45 MPa. The time between Ytrans,1 and Ytrans,2 was about 10 min. During this transition turgor gradients of as much as 0.15 MPa were measured across the cortex. They resulted from a faster rate of turgor recovery of cells deeper inside the tissue compared with cells near the root periphery. Presumably, the phloem was the source of the compounds for the osmotic adjustment. Turgor recovery was restricted to the expansion zone, as was confirmed by measurements of pressure kinetics in mature root tissue. Withdrawal of the osmoticum caused an enormous transient increase of elongation, which was related to only a small initial increase of P. Throughout the experiment, the relationship between root elongation rate and turgor was nonlinear. Consequently, when Y were calculated from steady-state conditions of P and root elongation before and after the osmotic treatment, Yss was only 0.21 MPa and significantly smaller compared with the values obtained from direct measurements (0.42-0.64 MPa). Thus, we strongly emphasize the need for measurements of short-term responses of elongation and turgor to determine cell wall mechanics appropriately. Our results indicate that the rate of solute flow into the growth zone could become rate-limiting for cell expansion under conditions of mild water stress.     

Kinetic and Physical Studies of Cell Death Induced By Chemotherapeutic Agents Or Hyperthermia

The kinetics of three physical parameters: cell density, relative cytoplasmic viscosity and DNA stability to denaturation have been measured during the period preceding cell death induced by hyperthermia, methylprednisolone and a series of cancer chemotherapeutic agents. This series of measurements employed cultured human lymphoblastoid cells as an experimental system to establish the changes that can be observed in the early stages of cell death, prior to applying such measurements to tissue biopsies from solid human tumours. Cell death, induced by hyperthermia up to 43°C, methylprednisolone, vincristine, 5-fluorouracil, BCNU and melphalan, showed essentially identical and reproducible changes corresponding to those which characterize programmed cell death (apoptosis). Such changes could also be observed following hyperthermia above 43°C, but reproducibility was poor and increasing damage to the cell membranes was evident. In cells treated with adriamycin or methotrexate, cell sub-populations showing an increase in cell density were not detected. Measurements of DNA stability were readily performed by flow cytofluorometry thus allowing rapid quantitation of the fraction of cells in the early stages of cell death. Modified flow cytometric instrumentation would further allow measurement of cytoplastic viscosity as an additional parameter to indicate entry into programmed cell death. This suggests that these measurements could readily be applied to cell suspensions derived from tumour tissue biopsies for a more accurate assessment of tumour growth rate, and to allow monitoring of response to therapy in sequential tumour biopsies.     

Determination of mechanical properties of soft tissue scaffolds by atomic force microscopy nanoindentation

While the determination of mechanical properties of a hard scaffold is relatively straightforward, the mechanical testing of a soft tissue scaffold poses significant challenges due in part to its fragility. Here, we report a new approach for characterizing the stiffness and elastic modulus of a soft scaffold through atomic force microscopy (AFM) nanoindentation. Using collagen-chitosan hydrogel scaffolds as model soft tissue scaffolds, we demonstrated the feasibility of using AFM nanoindentation to determine a force curve of a soft tissue scaffold. A mathematical model was developed to ascertain the stiffness and elastic modulus of a scaffold from its force curve obtained under different conditions. The elastic modulus of a collagen-chitosan (80%/20%, v/v) scaffold is found to be 3.69 kPa. The scaffold becomes stiffer if it contains more chitosan. The elastic modulus of a scaffold composed of 70% collagen and 30% chitosan is about 11.6 kPa. Furthermore, the stiffness of the scaffold is found to be altered significantly by extracellular matrix deposited from cells that are grown inside the scaffold. The elastic modulus of collagen-chitosan scaffolds increased from 10.5 kPa on day 3 to 63.4 kPa on day 10 when human foreskin fibroblast cells grew inside the scaffolds. Data acquired from these measurements will offer new insights into understanding cell fate regulation induced by physiochemical cues of tissue scaffolds.     

Localization of ionic pathways in the teleost opercular membrane by extracellular recording with a vibrating probe

We have adapted the vibrating probe extracellular recording technique to use on an epithelium under voltage clamp in an Ussing chamber. The vibrating probe allows very low drift measurements of current density immediately over the epithelial surface. These measurements allowed sites of electrogenic transport in the epithelium to be localized with a spatial resolution of 5 micrometers. The technique was applied to the opercular membrane of the teleost fish, the tilapia, Sarotherodon mossambicus. The mitochondrion-rich "chloride cells" were shown to be the only sites of electrogenic ion transport in this heterogeneous epithelium. Cell sampling experiments demonstrated variable negative short-circuit currents associated with nearly all of approximately 300 chloride cells examined, which appeared to account for all of the tissue short-circuit current. Current-voltage relations for individual cells were also measured. Conductance associated with chloride cells (i.e. cellular and junctional pathways) accounted for all but 0.5 mS/cm2 of the tissue conductance, with the balance apparently accounted for by leak pathways near the edge of the tissue. Current and conductance associated with other cell types was at least 50-fold smaller than for the chloride cell. Chloride-free solutions reduced chloride cell current and conductance by 98 and 95%, respectively.     

A comparison of the size of photoreceptor cells from the retina of the domestic pig as determined by light and scanning electron microscopy

While gathering data on the visual pigments of numerous species, many light micrographs have been taken of the photoreceptor cells containing the visual pigment after spectral recordings have been made from these cells. These micrographs are used to view the cells and obtain measurements of their size. Usually the morphology of the photoreceptor cells is retained adequately so that such measurements can be taken. Occasionally it is necessary to partially fix the retinal tissue which aids in the maintenance of photoreceptor morphology while allowing visual pigment spectral recordings to be made. We have found that primate retinal tissue, as well as some other mammalian tissue, disintegrates rapidly. Although partial fixation allows spectral recordings to be made before the micrographs are taken, the treatment does not always adequately preserve cell morphology for quality micrographs to be obtained. In these cases, visual pigment recordings are made from pieces of unfixed and partially fixed retinal tissue; an additional piece of the same retinal material is well-fixed, embedded and thick-sectioned for light microscopy.Preparing retinal material for sectioning is lengthy and time consuming so an alternative tissue preparation technique was sought. Material can be processed for the scanning electron microscope (SEM) more rapidly than for sectioning, however severe tissue shrinkage occurs during this process. It was found that although shrinkage does occur in the retinal tissue prepared for SEM, the relative proportions of the photoreceptor cells are maintained extremely well. Using the critical point drying method (CPD) pig retinal tissue was prepared for SEM. Scanning electron micrographs of the pig photoreceptors were taken for cell measurement. Since these micrographs could be made at higher magnification than is available by light microscopy, a more detailed view of the pig photoreceptor cells was obtained. Cell measurements made from the light and the scanning electron micrographs indicate that an approximate shrinkage of 50% occurs in the SEM prepared material.     

Action Potential Duration Heterogeneity of Cardiac Tissue Can Be Evaluated from Cell Properties Using Gaussian Green's Function Approach

Action potential duration (APD) heterogeneity of cardiac tissue is one of the most important factors underlying initiation of deadly cardiac arrhythmias. In many cases such heterogeneity can be measured at tissue level only, while it originates from differences between the individual cardiac cells. The extent of heterogeneity at tissue and single cell level can differ substantially and in many cases it is important to know the relation between them. Here we study effects from cell coupling on APD heterogeneity in cardiac tissue in numerical simulations using the ionic TP06 model for human cardiac tissue. We show that the effect of cell coupling on APD heterogeneity can be described mathematically using a Gaussian Green''s function approach. This relates the problem of electrotonic interactions to a wide range of classical problems in physics, chemistry and biology, for which robust methods exist. We show that, both for determining effects of tissue heterogeneity from cell heterogeneity (forward problem) as well as for determining cell properties from tissue level measurements (inverse problem), this approach is promising. We illustrate the solution of the forward and inverse problem on several examples of 1D and 2D systems.     

Label-free, high-throughput measurements of dynamic changes in cell nuclei using angle-resolved low coherence interferometry

Accurate measurements of nuclear deformation, i.e., structural changes of the nucleus in response to environmental stimuli, are important for signal transduction studies. Traditionally, these measurements require labeling and imaging, and then nuclear measurement using image analysis. This approach is time-consuming, invasive, and unavoidably perturbs cellular systems. Light scattering, an emerging biophotonics technique for probing physical characteristics of living systems, offers a promising alternative. Angle-resolved low-coherence interferometry (a/LCI), a novel light scattering technique, was developed to quantify nuclear morphology for early cancer detection. In this study, a/LCI is used for the first time to noninvasively measure small changes in nuclear morphology in response to environmental stimuli. With this new application, we broaden the potential uses of a/LCI by demonstrating high-throughput measurements and by probing aspherical nuclei. To demonstrate the versatility of this approach, two distinct models relevant to current investigations in cell and tissue engineering research are used. Structural changes in cell nuclei due to subtle environmental stimuli, including substrate topography and osmotic pressure, are profiled rapidly without disrupting the cells or introducing artifacts associated with traditional measurements. Accuracy ≥ 3% is obtained for the range of nuclear geometries examined here, with the greatest deviations occurring for the more complex geometries. Given the high-throughput nature of the measurements, this deviation may be acceptable for many biological applications that seek to establish connections between morphology and function.     

Optimizing optical flow cytometry for cell volume-based sorting and analysis

Cell size is a defining characteristic central to cell function and ultimately to tissue architecture. The ability to sort cell subpopulations of different sizes would facilitate investigation at genomic and proteomic levels of mechanisms by which cells attain and maintain their size. Currently available cell sorters, however, cannot directly measure cell volume electronically, and it would therefore be desirable to know which of the optical measurements that can be made in such instruments provide the best estimate of volume. We investigated several different light scattering and fluorescence measurements in several different cell lines, sorting cell fractions from the high and low end of distributions, and measuring volume electronically to determine which sorting strategy yielded the best separated volume distributions. Since we found that different optical measurements were optimal for different cell lines, we suggest that following this procedure will enable other investigators to optimize their own cell sorters for volume-based separation of the cell types with which they work.     

Short-lived, transitory cell-cell interactions foster migration-dependent aggregation

During embryonic development, motile cells aggregate into cohesive groups, which give rise to tissues and organs. The role of cell migration in regulating aggregation is unclear. The current paradigm for aggregation is based on an equilibrium model of differential cell adhesivity to neighboring cells versus the underlying substratum. In many biological contexts, however, dynamics is critical. Here, we provide evidence that multicellular aggregation dynamics involves both local adhesive interactions and transport by cell migration. Using time-lapse video microscopy, we quantified the duration of cell-cell contacts among migrating cells that collided and adhered to another cell. This lifetime of cell-cell interactions exhibited a monotonic decreasing dependence on substratum adhesivity. Parallel quantitative measurements of cell migration speed revealed that across the tested range of adhesive substrata, the mean time needed for cells to migrate and encounter another cell was greater than the mean adhesion lifetime, suggesting that aggregation dynamics may depend on cell motility instead of the local differential adhesivity of cells. Consistent with this hypothesis, aggregate size exhibited a biphasic dependence on substratum adhesivity, matching the trend we observed for cell migration speed. Our findings suggest a new role for cell motility, alongside differential adhesion, in regulating developmental aggregation events and motivate new design principles for tuning aggregation dynamics in tissue engineering applications.     

Cellular composition of the cyclic corpus luteum of the cow

The cellular composition of CL from 6 cows on approximately Day 12 of the oestrous cycle, after synchronization with cloprostenol, was studied by ultrastructural morphometry. Point-count measurements of volume density (mean +/- s.d.) showed that large luteal cells occupied 40.2 +/- 7.0% of the luteal tissue, and small luteal cells 27.7 +/- 6.3%. Of the total of 393.4 +/- 52.0 x 10(3) cells per mm3 of luteal tissue, large luteal cells made up only 3.5% and small luteal cells 26.7%, a ratio of 1:7.6. Endothelial cells/pericytes, at 52.3%, were the most numerous cell type. The mean volume per large luteal cell was 29.6 +/- 6.3 x 10(3) microns 3, while that of small luteal cells was 2.7 +/- 0.4 x 10(3) microns 3. In spherical form, these volumes would represent mean diameters of 38.4 microns and 17.2 microns respectively, and are consistent with published measurements on dispersed luteal cells. However, the values for cell numbers are much higher than published values based on luteal tissue dispersion, suggesting that dispersion may result in substantial and possibly selective losses of luteal cells.     

A biomechanical model for fibril recruitment: Evaluation in tendons and arteries

Simulations of soft tissue mechanobiological behaviour are increasingly important for clinical prediction of aneurysm, tendinopathy and other disorders. Mechanical behaviour at low stretches is governed by fibril straightening, transitioning into load-bearing at recruitment stretch, resulting in a tissue stiffening effect. Previous investigations have suggested theoretical relationships between stress-stretch measurements and recruitment probability density function (PDF) but not derived these rigorously nor evaluated these experimentally. Other work has proposed image-based methods for measurement of recruitment but made use of arbitrary fibril critical straightness parameters. The aim of this work was to provide a sound theoretical basis for estimating recruitment PDF from stress-stretch measurements and to evaluate this relationship using image-based methods, clearly motivating the choice of fibril critical straightness parameter in rat tail tendon and porcine artery. Rigorous derivation showed that the recruitment PDF may be estimated from the second stretch derivative of the first Piola-Kirchoff tissue stress. Image-based fibril recruitment identified the fibril straightness parameter that maximised Pearson correlation coefficients (PCC) with estimated PDFs. Using these critical straightness parameters the new method for estimating recruitment PDF showed a PCC with image-based measures of 0.915 and 0.933 for tendons and arteries respectively. This method may be used for accurate estimation of fibril recruitment PDF in mechanobiological simulation where fibril-level mechanical parameters are important for predicting cell behaviour.