Studies on agenesis in the permanent dentition

Tooth dimensions in 104 males and females with agenesis of one or more permanent teeth, other than third molars, have been examined. The amounts of size reduction from normal in mesiodistal and buccolingual tooth diameters appear to be independent. Also some apparent differences from normal tooth size variability were noted. Interestingly, first molars and canines, both considered to be stable components of the dentition, showed significant variability in tooth size. In addition the incidence of individual tooth agenesis within this sample was noted and maxillary lateral incisor was most frequently absent in both sexes.     

Sexual dimorphism in modern human permanent teeth

On average, males possess larger tooth crowns than females in contemporary human populations, although the degree of dimorphism varies within different populations. In previous studies, different amounts of either enamel or dentine were implicated as the cause of this dimorphism. In this study, we attempt to determine the nature of sexual dimorphism in the crowns of permanent modern human teeth and to determine if two contrasting tooth types (permanent third molars and canines) show identical patterns of dimorphism in enamel and dentine distribution. We estimated the relative contributions of both enamel and dentine to total crown size, from buccolingual sections of teeth. Our sample consisted of a total of 144 mandibular permanent third molars and 25 permanent mandibular canines of known sex. We show that sexual dimorphism is likely due, in part, to the presence of relatively more dentine in the crowns of male teeth. However, whatever the underlying cause, dimorphism in both tooth root and tooth crown size should produce measurable dimorphism in tooth weight, though this has not been previously explored. Therefore, we provide some preliminary data that indicate the usefulness of wet tooth weight as a measure of sexual dimorphism. Both male permanent third molars and canines are significantly heavier than those of females. The weight dimorphism reported here for both classes of teeth may prove a useful finding for future forensic studies. In particular, weights of canines may be more useful as a means of sexing modern human skeletal material than linear or area measurements of teeth.     

Sexual dimorphism of cusp dimensions in human maxillary molars

Cusp dimensions of human maxillary molars were compared between males and females to determine whether the later-developed, distal cusps displayed greater sexual dimorphism than the earlier-developed, mesial cusps, and whether the later-forming second molar displayed greater sexual dimorphism than the first molar. First and second permanent molar crowns (M1 and M2) were measured indirectly, using dental casts obtained from 117 Japanese (65 males and 52 females). Measurements included maximum mesiodistal and buccolingual crown diameters and the diameters of the four main cusps: the paracone, protocone, metacone, and hypocone. Mean values of crown dimensions were larger in males than in females for both M1 and M2, but the sexual difference in protocone diameter of M1 was not significant. The protocone in M1 showed the least amount of sexual dimorphism, followed by the metacone, hypocone, and paracone, while in M2, the percentage sexual dimorphism corresponded to the order of cusp formation: paracone, protocone, metacone, and hypocone. With the exception of the paracone diameter, M2 showed greater sexual dimorphism than M1. Sexual dimorphism was not always greater in the later-developed, distal cusps of M1 or M2, but the protocone, the most important cusp in terms of occlusal function, displayed the least dimorphism in M1.     

Size and morphology of the permanent dentition in prehistoric Ohio Valley Amerindians.

Metric and morphological characterizations of the permanent teeth from a total of 155 prehistoric Amerindians are presented. The individuals represent samples from three Ohio Valley burial complexes (considered together as the Late Diffuse group): Glacial Kame, Adena and Ohio Hopewell. Metric data include common measures of central tendency and dispersion. From these measures estimates and analyses of the magnitude of sexual dimorphism and relative variability are presented as well as analyses of the patterns of these estimates. Forty morphological characters are also tabulated. The results indicate a number of provisional hypotheses: the generally larger tooth size of the Late Archaic Indian Knoll when compared to the Late Diffuse groups is consistent with the hypothesis of mitigated selective pressures in more technologically advanced groups; although tooth size is smaller in the Late Diffuse groups, dental morphology is as complex, or more so when compared to the Indian Knoll group. Since morphology and size do not covary exactly the biocultural forces resulting in smaller tooth size do not seem to act as strongly on dental morphology; odontological differences within the Late Diffuse arise primarily between the Glacial Kame-Adena and the Ohio Hopewell. These differences correspond to major biocultural changes in this area; although provisional hypotheses concerning odontological variability are erected, hypotheses concerning evolutionary trends must await the discovery of evolving lineages within these groups; similarities are noted among all compared groups including the pattern and magnitude of sexual dimorphism and relative variability. These parameters may be similar for all eastern Amerindians during this period; finally, the morphology of the deciduous dentition, which generally predicts that of the permanent teeth, is found to be less complex than the permanent teeth. This may be the result of a selective disadvantage for the individuals in the deciduous dentition sample which is reflected in the dentition.     

An odontometric analysis of the early Griqua dentition

The teeth of 28 Griqua skeletons were subjected to odontometric analysis. Significant sexual dimorphism in tooth size was demonstrated in canines and molars. Coefficients of variation were generally greater in the more distal tooth within morphological classes. Rank order correlations suggest similar patterns of variability in males and females. Comparisons of the Griqua dentition with similar populations were made.     

Sexual dimorphism of root length on a Greek population sample

Sexual dimorphism in teeth has been an area of research for osteoarchaeologists and forensic anthropologists studying human skeletal remains. As most studies have been based on the mesiodistal and buccolingual crown measurements, sexual dimorphism from root length dimensions remains “neglected” by comparison to crown dimensions. The aim of the present study was to test the existence of sexual dimorphism in the root length of single-rooted teeth with the purpose of investigating whether maximum root length can be reliably used to determine sex. A total of 774 permanent teeth in 102 individuals (58 males and 44 females) from the Athens Collection were examined. The maximum root length of each tooth was measured on the mesial, distal, buccal, and lingual side. Almost all teeth presented a high degree of sexual dimorphism with males showing numerically higher values in root length than females. The most dimorphic teeth were the maxillary second incisors followed by maxillary canines. The percentage of sexual dimorphism reached 16.56%, with maxillary teeth showing the highest degree of dimorphism. The classification results show that the overall correctly specified group percentage ranged from 58.6% to 90.0%. The data generated from this study suggest that root length measurements offer a reliable method for determining sex and are therefore useful in osteoarchaeological studies, particularly in cases of fragmented or cremated material, but also in forensic contexts. Moreover, root length can be used to separate the remains of female and male subadult individuals with a high level of accuracy thus addressing one of the most problematic issues in human osteoarchaeology and anthropology as immature skeletons are the most difficult to sex.     

Associations between Carabelli trait and cusp areas in human permanent maxillary first molars

Few dental anthropological studies have investigated the associations between tooth crown size and crown traits in humans using quantitative methods. We tested several hypotheses about overall crown size, individual cusp areas, and expression of Carabelli cusps in human permanent first molars by obtaining data from standardized occlusal photographs of 308 Australians of European descent (171 males and 137 females). Specifically, we aimed to calculate the areas of the four main molar cusps, and also Carabelli cusp, and to compare the relative variability of cusp areas in relation to timing of development. We also aimed to compare cusp areas between males and females and to describe how Carabelli cusp interacted with other molar cusps. Measurements included maximum crown diameters (mesiodistal and buccolingual crown diameters), the areas of the four main cusps, and the area of Carabelli cusp. The pattern of relative variability in absolute areas of molar cusps corresponded with their order of formation, the first-forming paracone displaying the least variation, and the last-forming Carabelli cusp showing the greatest. Overall crown size and areas of individual cusps all showed sexual dimorphism, with values in males exceeding those in females. Sexual dimorphism was smallest for paracone area and greatest for Carabelli cusp area. Overall crown size and cusp areas were larger in individuals displaying a Carabelli cusp, especially the hypocone area. Although the combined area of the protocone and a Carabelli cusp was greater in cuspal forms than noncuspal forms, protocone area alone was significantly smaller in the former. Our findings lead us to propose that, in individuals with the genotype for Carabelli trait expression, larger molar crowns are more likely to display Carabelli cusps, whereas molars with smaller crowns are more likely to display reduced forms of expression of the trait. We suggest that the pattern of folding of the internal enamel epithelium in developing molar crowns, particularly in the protocone region, can be modified by a developing Carabelli cusp.     

Geometric morphometric 3D shape analysis and covariation of human mandibular and maxillary first molars

Dental casts of 160 Greek subjects (80 males, 80 females) were scanned by a structured‐light scanner. The upper and lower right first molar occlusal surface 3D meshes were processed using geometric morphometric methods. A total of 265 and 274 curve and surface sliding semilandmarks were placed on the upper and lower molar surfaces, respectively. Principal component analysis and partial least square analysis were performed to assess shape parameters. Molars tended to vary between an elongated and a more square form. The first two principal components (PCs), comprising almost 1/3 of molar shape variation, were related to mesiodistal–buccolingual ratios and relative cusp position. Distal cusps displayed the greatest shape variability. Molars of males were larger than those of females (2.8 and 3.2% for upper and lower molars respectively), but no shape dimorphism was observed. Upper and lower molar sizes were significantly correlated (r² = 0.689). Allometry was observed for both teeth. Larger lower molars were associated with shorter cusps, expansion of the distal cusp, and constriction of the mesial cusps (predicted variance 3.25%). Upper molars displayed weaker allometry (predicted variance 1.59%). Upper and lower molar shape covariation proved significant (RV = 17.26%, P < 0.0001). The main parameter of molar covariation in partial least square axis 1, contributing to 30% of total covariation, was cusp height, in contrast to the primary variability traits exhibited by PC1 and PC2. The aim of this study was to evaluate shape variation and covariation, including allometry and sexual dimorphism, of maxillary and mandibular first permanent molar occlusal surfaces. Am J Phys Anthropol 152:186–196, 2013. © 2013 Wiley Periodicals, Inc.     

Fluctuating dental asymmetry: Variation among skeletal populations

Recent investigations have shown that nongenetic, environmental factors can adversely affect dental growth and produce bilateral asymmetries in tooth size. When asymmetries do not favor either side, i.e., absence of directional asymmetry, the condition is termed fluctuating asymmetry. Fluctuating asymmetry of the mesiodistal and buccolingual dimensions of the total permanent dentition was compared among human skeletal populations which differ socio-economically and nutritionally. Odontometric data were collected from prehistoric hunters (Indian Knoll site), later aboriginal farming groups (Campbell and Larson sites), and a modern cadaver population (Hamann-Todd). The magnitude of asymmetry is expressed by the familiar correlation coefficient, r. The proportion, then, of intra-individual variation due to fluctuating asymmetry is equal to 1-r. With Wilcoxon's signed ranks test on the correlation coefficients no significant sex difference was shown within populations. Among groups, though, Indian Knoll was the most odontometrically asymmetrical; moreover, within Indian Knoll, the taller and ostensibly better nourished individuals had larger, less asymmetrical teeth than the shorter individuals. These results suggest that environmentally mediated growth disturbance may be sensitively reflected by dental asymmetry. A population exhibiting other signs of severe growth disturbance, e.g., enamel hypoplasia and Harris lines, was the most dentally asymmetrical.     

Reduction of maxillary molars in Homo sapiens sapiens: a different perspective.

Crown and cusp areas, and buccolingual and mesiodistal diameters of maxillary molars of complete upper tooth rows (30 males, 30 females) were analysed in order to quantify changes in size and shape from the first to the third molar. Uni- and multivariate analyses revealed the mesial cusps, in particular the protocone (mesiolingual cusp), to be more stable than the other cusps. Although there is a gradient in size from the first to third molar, shape changes were found to be marked. Overall, the findings are in keeping with the field theory and the hypotheses of environmental constraints on later developing teeth. However, not all of the results could be entirely explained by these concepts. Functional aspects seem to account for the relative stability of the protocone and the buccolingual crown diameter. It appears that this functional complex is relatively stable despite the overall reduction of tooth size, which is probably secondary to processes occurring in the jaws and the cranium. This finding may have implications for studies on tooth reduction between populations of different time periods.     

Data on morphometric analysis of anterior teeth from Hazaribag College of Dental Sciences and Hospital,jharkhand

It is of interest to document data on morphometric (measurement of external form) analysis of maxillary and mandibular anterior teeth collected from a dental set up using mesio-distal (MD) dimension. The mesiodistal dimensions of all permanent anterior teeth (central incisor, lateral incisor and canine) of 25 males and 25 females patients were recorded using digital vernier calipers. Data were charted and statistical analysis was done using Mann Whitney U test. Data shows sexual dimorphism for every tooth between males and females. However, dimorphism was exhibited only in maxillary and mandibular canine, mandibular central incisors, and lateral incisor. Hence,odontometric parameters offer simple, reliable and cost-effective in forensic investigation for recording gender discrimination.     

Patterns of sexual dimorphism and of variability in the dentition ofOtolemur crassicaudatus

Normative odontometric data are presented on a sample of 66 adult thick-tailed bushbabies Otolemur crassicaudatus(34 male, 32 female). This species is characterized by low levels of sexual dimorphism, with univariate differences centered on the canines and the maxillary third molar. Multivariate canonical analysis isolates a third discriminator, the maxillary second molar. Stepwise discriminant analyses, performed after jackknifing, indicate high percentages of correct classification (males, 79.8–81.8%;females, 81–85.2%). When variability profiles consisting of arrays of CVs are compared, males and females are found to share similar patterns. Data for maxillary teeth offer support for Gingerich’s occlusal complexity model, while morphogenetic clusterings within regressions of variability on tooth size conform to those previously reported in other species. These relationships are lost in the mandibular dentition, suggesting an independence of upper from lower toothsize determination.     

Reduced tooth size in 45,X (Turner syndrome) females

Mean values and variances of deciduous and permanent tooth dimensions were compared between 121 45,X (Turner syndrome) females and 171 control subjects to clarify the role of the X chromosome on dental development. Although deciduous molars tended to be smaller than normal in 45,X females, there was no evidence of a reduction in tooth size for deciduous anterior teeth. In the permanent dentition, all mesiodistal dimensions were significantly smaller in 45,X females but only some of the buccolingual dimensions were smaller. The findings for deciduous tooth-size may reflect a sampling effect related to the extremely high frequency of spontaneous abortion in 45,X individuals. Results for permanent teeth are consistent with the concept of a decrease in enamel thickness in 45,X females.     

Family studies of tooth size factors in the permanent dentition.

Correlations between dimensions of the permanent teeth in Australian Aboriginals were studied by factor analysis to disclose the main sources of shared variability. Findings indicated that in both males and females most of the common variability in the tooth dimensions could be accounted for by factors representing mesiodistal size of anterior teeth, buccolingual size of anterior teeth, generalized size of the premolars and generalized size of the molars. Factor scores derived from the analysis were used to calculate intraclass correlations among brothers and among sisters. These correlations tended to be higher for the factors contributing most to the common variability indicating that the factors might represent fields under direct genetic control. There was no trend for intraclass correlations among siblings derived from multivariate scores to be consistently higher than those based on observed tooth dimensions. The main advantage to the user of factor analysis is the ability to interpret associations between interrelated variables more objectively than is possible by conventional correlation methods.     

A twin study of dental dimension. II. Independent genetic determinants

To demonstrate the presence of independent genetic determinants of multiple correlated tooth dimensions from twin data, a multivariate analysis was performed on the covariance matrices of monozygotic and dizygotic within-pair differences for mesiodistal and buccolingual dimensions of 28 teeth of the secondary dentition. The results provided strong evidences that the correlation among tooth dimensions is primarily genetic in origin, probably attributable to the pleiotropic action of either independent genes or groups of genes. Among the genetic factors that were identified, one appeared to affect the maxillary teeth in general while a second influenced primarily the anterior mandibular teeth. There was a striking tendency for homologous measurements on the right and left sides to be associated with the same genetic factor. In contrast, genetic determination of the maxillary and mandibular dentition seemed to be independent of each other, and a wider range of genetic factors were found to influence the mandibular than the maxillary teeth, suggesting that a differential degree of evolutionary stability may have been achieved in the teeth of the two jaws.     

Metric and morphological variability in the dentition of Colobine monkeys

A morphological study was performed using 97 Colobus polykomos and 41 Nasalis larvatus. The premolars and molars of these two taxa of leaf-eating monkeys were similar in that they possessed deeply grooved and highly pointed cusps. Of 7 dental traits investigated, 4 were significantly different between the 2 forms. Indeed, with 2 of these, the position of the lingual cusp on PM₄ and the number of cusps on PM³ displayed highly contrasting structures.Metric analysis was conducted using 47 C. polykomos and 37 N. larvatus specimens. Mesiodistal and buccolingual measurements were taken on the upper canine and all postcanine teeth. Sexual dimorphism was detected in most maxillary dental measurements and all mandibular estimates of both species. In all cases, males exceeded females in tooth diameter. Testing between species by sex revealed that C. polykomos was significantly larger in several canine and premolar dimensions while N. larvatus had significantly larger molar dimensions. An additional 73 measurements were selected to represent occluding dental structures and a morphological integration analysis was conducted. Results of this analysis indicated that C. polykomos possessed a C¹-PM₃ complex which was more highly intercorrelated whereas the broad lophed N. larvatus molars constituted a more highly correlated functional unit.It was suggested that the above differences between these two groups of leaf-eating monkeys probably resulted from inbreeding, isolation and drift.     

Intercusp relationships of the permanent maxillary first and second molars in American whites

Much of a human molar's morphology is concentrated on its occlusal surface. In view of embryologists' recent attention on the determination of crown morphology by enamel knots that initiate cusp formation, we were interested in the arrangement of cusp apices in the definitive tooth. Computer-assisted image analysis was used to measure intercusp distances and angles on permanent maxillary M1 and M2 in a sample of 160 contemporary North American whites. The intent was to generate normative data and to compare the size and variability gradients from M1 to M2. There is little sexual dimorphism in intercusp distances or angles, even though the conventional mesiodistal (MD) and buccolingual (BL) crown size is 2.0% and 4.0% larger in males, respectively, in these same teeth. Dimensions decreased in size and increased in variability from M1 to M2, but differentially. Cusps of the trigon were more stable between teeth, especially the paracone-protocone relationship. Principal components analysis on the six M1 distances disclosed only one eigenvalue above 1.0, indicating that overall crown size itself is the paramount controlling factor in this tooth that almost invariably exhibits a hypocone. In contrast, four components were extracted from among the 12 angular cusp relationships in M1. These axes of variation may prove useful in studies of intergroup differences. A shape difference occurs in M2, depending on whether the hypocone is present; when absent, the metacone is moved lingually, creating more of an isosceles arrangement for the cusps of the trigon. Statistically, correlations are low between occlusal intercusp relationships and conventional crown diameters measured at the margins of the crowns that form later. Weak statistical dependence between cusp relationships and traditional MD and BL diameters suggest that separate stage- and location-specific molecular signals control these different parts (and different stages) of crown formation.     

Carabelli's trait and tooth size of human maxillary first molars

Carabelli's trait is a morphological feature that can occur on the protocone of human maxillary molars. This study tests the hypothesis that Carabelli's trait is correlated statistically with the dimensions of the crown's four principal cusps or whether, as a cingular feature, the trait truly accretes onto an otherwise unaffected crown. Computer-assisted image analysis was used to measure the 6 intercusp distances and 12 angular relationships among cusp tips on the permanent first molar of 300 young adult American whites. Carabelli's complex was scored using an 8-grade ordinal scheme. Crown size was quantified in three ways, namely as 1) maximum mesiodistal and buccolingual diameters, 2) the 6 intercusp distances, and 3) the 12 angular cusp arrangements. There was no sex difference in the morphological expression of Carabelli's trait in this sample. Overall crown size and intercusp distances were significantly and progressively larger in molars with larger Carabelli's trait expressions. There are graded size responses between crown size (mesiodistal and buccolingual diameters), sizes of the four principal cusps, and morphological stage of Carabelli's complex, though the statistical relationships are appreciably stronger in males than females. Carabelli's trait occurs preferentially in larger molars. In contrast, angular (shape) relationships among cusp tips are not discernibly affected by trait size in either sex. There is the situation, then, that Carabelli's trait is developmentally correlated with crown size, but with no apparent alteration of cusp arrangements, suggesting that the increases are isometric across the occlusal table. Why the association is much weaker in females remains speculative, but these data provide yet another line of evidence that, within a population, tooth size is associated in a positive fashion with crown complexity.     

Sex estimation based on deciduous and permanent dentition in a contemporary spanish population

Sex estimation of skeletal remains with satisfactory allocation accuracy represents an essential step in reconstructing the biological profile of unknown individuals in archaeological research and forensic practice. Teeth are among the most frequently recovered physical elements of an individual that remain after death due to their hardness, durability, and resistance to postmortem insults. This study was based on the deciduous and permanent dentition of 269 individuals (150 males and 119 females) from the Granada osteological collection of identified infants, young children, and adults (Granada, Spain). Mesiodistal, buccolingual, and diagonal crown and cervical diameters of both dentitions were measured, and logistic regression analyses were performed to create equations for sex discrimination. The results show that the first and second deciduous molars and the permanent canines are the teeth with the greatest sexual dimorphism, providing percentages of correct assignment of sex between 78.1 and 93.1% in deciduous dentition and between 79.4 and 92.6% in permanent teeth, depending on the dimensions used. The results indicate that this method may be applicable as an adjunct with other accepted procedures for sex estimation when fragmentary skeletal remains are encountered in archaeological excavations and in forensic contexts. Am J Phys Anthropol 152:163–164, 2013. © 2013 Wiley Periodicals, Inc.     

Cusp size, sexual dimorphism, and heritability of cusp size in twins.

Overall measures of mandibular molars reflect the combined size contributions of the component cusps and ridges. Until now, the size hierarchy of primary and permanent mandibular molar cusps remained unclear. This paper utilizes the relative plane surface areas (basal area dimensions) of the individual molar cusps, as assays of cusp size to demonstrate cusp size variations within populations, antimere cuspal variations, sexual dimorphism, and, the heritability of cusp size. Duplicate dental casts from 199 pairs of like-sexed twins provide the raw dats. Defined anatomic landmarks on the occlusal surfaces were reduced to X-Y rectangular coordinates prior to the computation of the basal areas dimensions. The results establish a cusp size hierarchy specific for molar type, i.e., five-cusped molars with a distal fovea and distal marginal ridge (5fd), five-cusped molars without a distal fovea and without a distal marginal ridge (5o), and four-cusped molars (4c). Sexual dimorphism in cusp size is apparent in 5fd molar cusped but not in 5o molar cusps. However, males have a significantly higher frequency of 5fd molars. Females have a higher frequency of smaller 5o and 4c molars which have fewer crown components. Moreover, female 5o molars have cusps as large as or larger than 5o male molor cusps. Right-side-left-side differences exist between antimere cusps based on relatively low correlations. The mirroring of molor types occurs infrequently. When observed, most intrapair differences for cusp size, using F-ratios, indicate a low component of hereditary variability.