Modulation of microtubule interprotofilament interactions by modified taxanes

Microtubules assembled with paclitaxel and docetaxel differ in their numbers of protofilaments, reflecting modification of the lateral association between αβ-tubulin molecules in the microtubule wall. These modifications of microtubule structure, through a not-yet-characterized mechanism, are most likely related to the changes in tubulin-tubulin interactions responsible for microtubule stabilization by these antitumor compounds. We have used a set of modified taxanes to study the structural mechanism of microtubule stabilization by these ligands. Using small-angle x-ray scattering, we have determined how modifications in the shape and size of the taxane substituents result in changes in the interprotofilament angles and in their number. The observed effects have been explained using NMR-aided docking and molecular dynamic simulations of taxane binding at the microtubule pore and luminal sites. Modeling results indicate that modification of the size of substituents at positions C7 and C10 of the taxane core influence the conformation of three key elements in microtubule lateral interactions (the M-loop, the S3 β-strand, and the H3 helix) that modulate the contacts between adjacent protofilaments. In addition, modifications of the substituents at position C2 slightly rearrange the ligand in the binding site, modifying the interaction of the C7 substituent with the M-loop.     

Microtubule structure at improved resolution.

Microtubule architecture can vary with eukaryotic species, with different cell types, and with the presence of stabilizing agents. For in vitro assembled microtubules, the average number of protofilaments is reduced by the presence of sarcodictyin A, epothilone B, and eleutherobin (similarly to taxol) but increased by taxotere. Assembly with a slowly hydrolyzable GTP analogue GMPCPP is known to give 96% 14 protofilament microtubules. We have used electron cryomicroscopy and helical reconstruction techniques to obtain three-dimensional maps of taxotere and GMPCPP microtubules incorporating data to 14 A resolution. The dimer packing within the microtubule wall is examined by docking the tubulin crystal structure into these improved microtubule maps. The docked tubulin and simulated images calculated from "atomic resolution" microtubule models show tubulin heterodimers are aligned head to tail along the protofilaments with the beta subunit capping the microtubule plus end. The relative positions of tubulin dimers in neighboring protofilaments are the same for both types of microtubule, confirming that conserved lateral interactions between tubulin subunits are responsible for the surface lattice accommodation observed for different microtubule architectures. Microtubules with unconventional protofilament numbers that exist in vivo are likely to have the same surface lattice organizations found in vitro. A curved "GDP" tubulin conformation induced by stathmin-like proteins appears to weaken lateral contacts between tubulin subunits and could block microtubule assembly or favor disassembly. We conclude that lateral contacts between tubulin subunits in neighboring protofilaments have a decisive role for microtubule stability, rigidity, and architecture.     

Microtubules switch occasionally into unfavorable configurations during elongation

Tubulin assembles to form a range of structures that differ by their protofilament and monomer helix-start numbers. The microtubule lattice is believed to accommodate these different configurations by skewing the protofilaments so that the lateral interactions between tubulin subunits are maintained. Here, we present the characterization of 14 types of microtubules, including six novel ones, through an extensive analysis of microtubules assembled in vitro from pure tubulin. Although the six new types represented only 1 % of the total length of the population examined ( approximately 17 mm), they define the limits of microtubule structure and assembly. Protofilament skewing is restricted to within +/-2 degrees. Outside this range, the restoring force induced by the skewed protofilaments is compensated by a longitudinal shift (less than +/-0.2 nm) between adjacent protofilaments. Configurations with theoretical protofilament skew angles larger than +/-4 degrees or that necessitate larger modifications of the microtubule surface lattice were not observed. Analysis of the microtubule types distribution reveals that it is sharply peaked around the less skewed conformations. These results indicate that both the flexibility of the protofilaments and the strength of their lateral interactions restrict the range of structures assembled. They also demonstrate that growing microtubules can occasionally switch into energetically unfavorable configurations, a behavior that may account for the stochastic nature of catastrophes.     

Different protofilament-dependence of the microtubule binding between MAP2 and MAP4

To see a molecular basis of the difference in the microtubule binding between MAP2 and MAP4, we compared the binding of them onto microtubule and Zinc-sheet in the presence of various concentrations of NaCl. The Zinc-sheet is the lateral association of protofilaments arranged in an antiparallel fashion with alternatively exposed opposite surfaces, so that binding requiring adjacent protofilaments is restricted. While the salt-dependence of the MAP2 desorption was not altered between these tubulin polymers, MAP4 dissociated from Zinc-sheet at lower concentrations of NaCl than from microtubule. These results suggest that single protofilament is sufficient for microtubule binding of MAP2 as observed by Al-Bassam et al. [J. Cell Biol. 157 (2002) 1187], but MAP4 appeared to interact with adjacent protofilaments during microtubule-binding. Weakened binding on Zinc-sheets was also observed in the projection domain-deletion mutants of MAP4, so that the difference in the protofilament-dependence would lie in the relatively conserved microtubule-binding domain.     

Metastability of microtubules induced by competing internal forces

Recent modeling efforts to estimate energies of tubulin-tubulin bonds shed light on a delicate balance between competing mechanical forces maintaining microtubule walls. Here we formulate two important refinements to the explanation of bond energetics. First, energy surface calculations in the elastic filament approximation reveal a finite stabilizing barrier assumed a simple Lennard-Jones-like potential for protein bonds. The presence of a guanosine triphosphate (GTP) cap represented by straight segments is necessary, as it is predicted for a long time. In the lack of such a cap, the protofilaments are either in an absolutely stable or absolutely unstable state. Second, our calculations show that this barrier appears only if the mechanical energy associated with the conformational change after GTP hydrolysis (curling energy) is larger than the strength of lateral bonds. The overall energy balance we propose supports continuous assembly of GTP dimers, a metastable state in the presence of a finite GTP cap and energetically driven disassembly of guanosine diphosphate protofilaments.     

A unique mode of microtubule stabilization induced by peloruside A

Microtubules are significant therapeutic targets for the treatment of cancer, where suppression of microtubule dynamicity by drugs such as paclitaxel forms the basis of clinical efficacy. Peloruside A, a macrolide isolated from New Zealand marine sponge Mycale hentscheli, is a microtubule-stabilizing agent that synergizes with taxoid drugs through a unique site and is an attractive lead compound in the development of combination therapies. We report here unique allosteric properties of microtubule stabilization via peloruside A and present a structural model of the peloruside-binding site. Using a strategy involving comparative hydrogen-deuterium exchange mass spectrometry of different microtubule-stabilizing agents, we suggest that taxoid-site ligands epothilone A and docetaxel stabilize microtubules primarily through improved longitudinal interactions centered on the interdimer interface, with no observable contributions from lateral interactions between protofilaments. The mode by which peloruside A achieves microtubule stabilization also involves the interdimer interface, but includes contributions from the α/β-tubulin intradimer interface and protofilament contacts, both in the form of destabilizations. Using data-directed molecular docking simulations, we propose that peloruside A binds within a pocket on the exterior of β-tubulin at a previously unknown ligand site, rather than on α-tubulin as suggested in earlier studies.     

Brownian Dynamics of Subunit Addition-Loss Kinetics and Thermodynamics in Linear Polymer Self-Assembly

The structure and free energy of multistranded linear polymer ends evolves as individual subunits are added and lost. Thus, the energetic state of the polymer end is not constant, as assembly theory has assumed. Here we utilize a Brownian dynamics approach to simulate the addition and loss of individual subunits at the polymer tip. Using the microtubule as a primary example, we examined how the structure of the polymer tip dictates the rate at which units are added to and lost from individual protofilaments. We find that freely diffusing subunits arrive less frequently to lagging protofilaments but bind more efficiently, such that there is no kinetic difference between leading and lagging protofilaments within a tapered tip. However, local structure at the nanoscale has up to an order-of-magnitude effect on the rate of addition. Thus, the kinetic on-rate constant, integrated across the microtubule tip (k_on,MT), is an ensemble average of the varying individual protofilament on-rate constants (k_on,PF). Our findings have implications for both catastrophe and rescue of the dynamic microtubule end, and provide a subnanoscale framework for understanding the mechanism of action of microtubule-associated proteins and microtubule-directed drugs. Although we utilize the specific example of the microtubule here, the findings are applicable to multistranded polymers generally.     

Brownian Dynamics of Subunit Addition-Loss Kinetics and Thermodynamics in Linear Polymer Self-Assembly

The structure and free energy of multistranded linear polymer ends evolves as individual subunits are added and lost. Thus, the energetic state of the polymer end is not constant, as assembly theory has assumed. Here we utilize a Brownian dynamics approach to simulate the addition and loss of individual subunits at the polymer tip. Using the microtubule as a primary example, we examined how the structure of the polymer tip dictates the rate at which units are added to and lost from individual protofilaments. We find that freely diffusing subunits arrive less frequently to lagging protofilaments but bind more efficiently, such that there is no kinetic difference between leading and lagging protofilaments within a tapered tip. However, local structure at the nanoscale has up to an order-of-magnitude effect on the rate of addition. Thus, the kinetic on-rate constant, integrated across the microtubule tip (k_on,MT), is an ensemble average of the varying individual protofilament on-rate constants (k_on,PF). Our findings have implications for both catastrophe and rescue of the dynamic microtubule end, and provide a subnanoscale framework for understanding the mechanism of action of microtubule-associated proteins and microtubule-directed drugs. Although we utilize the specific example of the microtubule here, the findings are applicable to multistranded polymers generally.     

Structural and functional differences between porcine brain and budding yeast microtubules

The cytoskeleton of eukaryotic cells relies on microtubules to perform many essential functions. We have previously shown that, in spite of the overall conservation in sequence and structure of tubulin subunits across species, there are differences between mammalian and budding yeast microtubules with likely functional consequences for the cell. Here we expand our structural and function comparison of yeast and porcine microtubules to show different distribution of protofilament number in microtubules assembled in vitro from these two species. The different geometry at lateral contacts between protofilaments is likely due to a more polar interface in yeast. We also find that yeast tubulin forms longer and less curved oligomers in solution, suggesting stronger tubulin:tubulin interactions along the protofilament. Finally, we observed species-specific plus-end tracking activity for EB proteins: yeast Bim1 tracked yeast but not mammalian MTs, and human EB1 tracked mammalian but not yeast MTs. These findings further demonstrate that subtle sequence differences in tubulin sequence can have significant structural and functional consequences in microtubule structure and behavior.     

Direct visualization of the microtubule lattice seam both in vitro and in vivo

Microtubules are constructed from alpha- and beta-tubulin heterodimers that are arranged into protofilaments. Most commonly there are 13 or 14 protofilaments. A series of structural investigations using both electron microscopy and x-ray diffraction have indicated that there are two potential lattices (A and B) in which the tubulin subunits can be arranged. Electron microscopy has shown that kinesin heads, which bind only to beta-tubulin, follow a helical path with a 12-nm pitch in which subunits repeat every 8-nm axially, implying a primarily B-type lattice. However, these helical symmetry parameters are not consistent with a closed lattice and imply that there must be a discontinuity or "seam" along the microtubule. We have used quick-freeze deep-etch electron microscopy to obtain the first direct evidence for the presence of this seam in microtubules formed either in vivo or in vitro. In addition to a conventional single seam, we have also rarely found microtubules in which there is more than one seam. Overall our data indicates that microtubules have a predominantly B lattice, but that A lattice bonds between tubulin subunits are found at the seam. The cytoplasmic microtubules in mouse nerve cells also have predominantly B lattice structure and A lattice bonds at the seam. These observations have important implications for the interaction of microtubules with MAPs and with motor proteins, and for example, suggest that kinesin motors may follow a single protofilament track.     

Side chain interactions determine the amyloid organization: a single layer beta-sheet molecular structure of the calcitonin peptide segment 15-19

In this paper we present a detailed atomic model for a protofilament, the most basic organization level, of the amyloid fibre formed by the peptide DFNKF. This pentapeptide is a segment derived from the human calcitonin, a natural amyloidogenic protein. Our model, which represents the outcome of extensive explicit solvent molecular dynamics (MD) simulations of different strand/sheet organizations, is a single beta-sheet filament largely without a hydrophobic core. Nevertheless, this structure is capable of reproducing the main features of the characteristic amyloid fibril organization and provides clues to the molecular basis of its experimental aggregation behaviour. Our results show that the side chains' chemical diversity induces the formation of a complex network of interactions that finally determine the microscopic arrangement of the strands at the protofilament level. This network of interactions, consisting of both side chain-side chain and backbone-side chain interactions, confers on the final single beta-sheet arrangement an unexpected stability, both by enhancing the association of related chemical groups and, at the same time, by shielding the hydrophobic segments from the polar solvent. The chemical physical characterization of this protofilament provides hints to the possible thermodynamical basis of the supra molecular organization that allows the formation of the filaments by lateral association of the preformed protofibrils. Its regular, highly polarized structure shows how other protofilaments can assemble. In terms of structural biology, our results clearly indicate that an amyloid organization implies a degree of complexity far beyond a simple nonspecific association of peptide strands via amide hydrogen bonds.     

Limited flexibility of the inter-protofilament bonds in microtubules assembled from pure tubulin

The superposition of the regular arrangement of tubulin subunits in microtubules gives rise to moiré patterns in cryo-electron micrographs. The moiré period can be predicted from the dimensions of the tubulin subunits and their arrangement in the surface lattice. Although the average experimental moiré period is usually in good agreement with the theoretical one, there is variation both within and between microtubules. In this study, we addressed the origin of this variability. We examined different possibilities, including artefacts induced by the preparation of the vitrified samples, and variations of the parameters that describe the microtubule surface lattice. We show that neither flattening nor bending of the microtubules, nor changes in the subunit dimensions, can account for the moiré period variations observed in 12 and 14 protofilament microtubules. These can be interpreted as slight variations, in the range –0.5 Å to +0.9 Å, of the lateral interactions between tubulin subunits in adjacent protofilaments. These results indicate that the inter-protofilament bonds are precisely maintained in microtubules assembled in vitro from pure tubulin. The fact that the moiré period is not affected by bending indicates that the local interactions between tubulin subunits are sufficiently stiff to accommodate large deformations of the microtubule wall.     

Simulations of Tubulin Sheet Polymers as Possible Structural Intermediates in Microtubule Assembly

The microtubule assembly process has been extensively studied, but the underlying molecular mechanism remains poorly understood. The structure of an artificially generated sheet polymer that alternates two types of lateral contacts and that directly converts into microtubules, has been proposed to correspond to the intermediate sheet structure observed during microtubule assembly. We have studied the self-assembly process of GMPCPP tubulins into sheet and microtubule structures using thermodynamic analysis and stochastic simulations. With the novel assumptions that tubulins can laterally interact in two different forms, and allosterically affect neighboring lateral interactions, we can explain existing experimental observations. At low temperature, the allosteric effect results in the observed sheet structure with alternating lateral interactions as the thermodynamically most stable form. At normal microtubule assembly temperature, our work indicates that a class of sheet structures resembling those observed at low temperature is transiently trapped as an intermediate during the assembly process. This work may shed light on the tubulin molecular interactions, and the role of sheet formation during microtubule assembly.     

EBs recognize a nucleotide-dependent structural cap at growing microtubule ends

Growing microtubule ends serve as transient binding platforms for essential proteins that regulate microtubule dynamics and their interactions with cellular substructures. End-binding proteins (EBs) autonomously recognize an extended region at growing microtubule ends with unknown structural characteristics and then recruit other factors to the dynamic end structure. Using cryo-electron microscopy, subnanometer single-particle reconstruction, and fluorescence imaging, we present a pseudoatomic model of how the calponin homology (CH) domain of the fission yeast EB Mal3 binds to the end regions?of growing microtubules. The Mal3 CH domain bridges protofilaments except at the microtubule seam. By binding close to the exchangeable GTP-binding site, the CH domain is ideally positioned to sense the microtubule's nucleotide state. The same microtubule-end region is also a stabilizing structural cap protecting the microtubule from depolymerization. This insight supports a common structural link between two important biological phenomena, microtubule dynamic instability and end tracking.     

Arrangement of subunits in microtubules with 14 profilaments

The structure of 14-protofilament microtubules reassembled from dogfish shark brain tubulin was analyzed by high resolution electron microscopy and optical diffraction. The simultaneous imaging of the protofilaments from near and far sides of these tubules produces a moire pattern with a period of approximately 96 nm. Optical diffraction patterns show that the 5-nm spots that arise from the protofilaments for the two sides of the tubule are not coincident but lie off the equator by a distance of 1/192 nm-1. These data provide evidence that in reassembled microtubules containing 14 protofilaments, the protofilaments are tilted 1.5 degrees with respect to the long axis of the tubule, giving a left-handed superhelix with a pitch of 2.7 micron. The hypothesis is that the tilt of the protofilaments occurs to accommodate the 14th protofilament. It is determined that when the 14th protofilament is incorporated, the 3-start helix is maintained, but the pitch angle changes from 10.5 degrees to 11.2 degrees, the angle between protofilaments measured from the center of the microtubule changes by 2 degrees, and the dimer lattice is discontinuous. These observations show that the tubulin molecule is sufficiently flexible to accomodate slight distortions at the lateral bonding sites and that the lateral bonding regions of the alpha and beta monomers are sufficiently similar to allow either alpha-alpha and beta-beta subunit pairing or alpha-beta subunit pairing.     

Assembly and three-dimensional image reconstruction of tubulin hoops

The three-dimensional structure of tubulin hoops has been determined by image reconstruction. The surface lattice of hoops is similar to that of microtubules, but in addition hoops possess a superstructure of protofilament triplets. The protofilaments differ mainly in their apparent volumes and lateral spacings. The volumes depend strongly on the orientation on the carbon support, while the spacings do not. The differences of appearance do not reflect changes of intrinsic subunit structure. They are explained by differential staining related to the orientation and packing of protofilament. Microtubule-associated proteins do not contribute to the average subunit structure. All apparent protofilament structures differ from that expected from X-ray patterns of microtubules in terms of subunit tilt and distribution of contrast. It is concluded that the negatively stained structure is a reliable representation of the arrangement of protein subunits, but not of their shape. Tubulin hoops occur in conditions of microtubule assembly near the critical concentration in a stabilizing buffer. Their formation depends on microtubule-associated proteins and on the initial presence of tubulin oligomers, which may associate into short protofilament triplets. If their elongation is rapid compared to lateral aggregation, they form closed hoops. The growth phase is followed by a redistribution phase, during which hoops disappear in favour of microtubules. This behaviour is explained by kinetic overshoot assembly. Each triplet resembles an incomplete microtubule wall so that the junction between two triplets may be compared to a junction between microtubule walls. Such junctions are formed by a closely spaced pair of protofilaments. They are analogous to junctions between microtubules and incomplete microtubule walls, and they have the same clockwise curvature when viewed at the growing end.     

Tannic acid-stained microtubules with 12, 13, and 15 protofilaments

Subunit structure in the walls of sectioned microtubules was first noted by Ledbetter and Porter (6), who clearly showed that certain microtubules of plant meristematic cells have 13 wall protofilaments when seen in cross section. Earlier, protofilaments of microtubular elements had been described in negatively stained material, although exact counts of their number were difficult to obtain. In microtubular elements of axonemes, some success has been achieved in visualizing protofilaments in conventionally fixed and sectioned material (8, 10); much less success has been achieved in identifying and counting protofilaments of singlet cytoplasmic microtubules. By using glutaraldehyde-tannic acid fixation, as described by Misuhira and Futaesaku (7), Tilney et al. (12) studied microtubules from a number of sources and found that all have 13 protofilaments comprising their walls. These authors note that "...the number of subunits and their arrangement as protofilaments appear universal...". Preliminary studies of ventral nerve cord of crayfish fixed in glutaraldehyde-tannic acid indicated that axonal microtubules in this material possess only 12 protofilaments (4). On the basis of this observation, tannic acid preparations of several other neuronal and non-neuronal systems were examined. Protofilaments in microtubules from these several cell types are clearly demonstrated, and counts have been made which show that some kinds of microtubules have more or fewer protofilaments than the usual 13 and that at least one kind of microtubule has an even rather than an odd number.     

New data on the microtubule surface lattice

The in vitro polymerisation of tubulin is a remarkable example of protein self-assembly in that several closely related microtubule structures coexist on the polymerisation plateau. Unfixed and unstained in vitro assembled microtubules were observed in vitreous ice by cryo-electron microscopy. New results are reported that considerably extend previous observations [47]. In ice, microtubule images have a distinctive contrast related to the number and skew of the protofilaments. The microtubules observed have from twelve to seventeen protofilaments. Comparison with thin sections of pelleted material allows a direct identification of images from microtubules with thirteen, fourteen and fifteen protofilaments. A surface lattice accommodation mechanism, previously proposed to explain how variable numbers of protofilaments can be incorporated into the basic thirteen protofilament structure, is described in detail. Our new experimental results are shown to be in overall agreement with the theoretical predictions. Only thirteen protofilament microtubules have unskewed protofilaments, this was confirmed by observations on axoneme fragments. The results imply that the microtubule surface lattice is based on a mixed packing which combines features of the standard A and B lattices.     

Microtubule dynamics and microtubule caps: a time-resolved cryo- electron microscopy study

Microtubules display the unique property of dynamic instability characterized by phase changes between growth and shrinkage, even in constant environmental conditions. The phases can be synchronized, leading to bulk oscillations of microtubules. To study the structural basis of dynamic instability we have examined growing, shrinking, and oscillating microtubules by time-resolved cryo-EM. In particular we have addressed three questions which are currently a matter of debate: (a) What is the relationship between microtubules, tubulin subunits, and tubulin oligomers in microtubule dynamics?; (b) How do microtubules shrink? By release of subunits or via oligomers?; and (c) Is there a conformational change at microtubule ends during the transitions from growth to shrinkage and vice versa? The results show that (a) oscillating microtubules coexist with a substantial fraction of oligomers, even at a maximum of microtubule assembly; (b) microtubules disassemble primarily into oligomers; and (c) the ends of growing microtubules have straight protofilaments, shrinking microtubules have protofilaments coiled inside out. This is interpreted as a transition from a tense to a relaxed conformation which could be used to perform work, as suggested by some models of poleward chromosome movement during anaphase.     

The minimum GTP cap required to stabilize microtubules

Background: Microtubules polymerized from pure tubulin show the unusual property of dynamic instability, in which both growing and shrinking polymers coexist at steady state. Shortly after its addition to a microtubule end, a tubulin subunit hydrolyzes its bound GTP. Studies with non-hydrolyzable analogs have shown that GTP hydrolysis is not required for microtubule assembly, but is essential for generating a dynamic polymer, in which the subunits at the growing tip have bound GTP and those in the bulk of the polymer have bound GDP. It has been suggested that loss of the ‘GTP cap’ through dissociation or hydrolysis exposes the unstable GDP core, leading to rapid depolymerization. However, evidence for a stabilizing cap has been very difficult to obtain.Results We developed an assay to determine the minimum GTP cap necessary to stabilize a microtubule from shrinking. Assembly of a small number of subunits containing a slowly hydrolyzed GTP analog (GMPCPP) onto the end of dynamic microtubules stabilized the polymer to dilution. By labeling the subunits with rhodamine, we measured the size of the cap and found that as few as 40 subunits were sufficient to stabilize a microtubule.Conclusion On the basis of statistical arguments, in which the proportion of stabilized microtubules is compared to the probability that when 40 GMPCPP-tubulin subunits have polymerized onto a microtubule end, all protofilaments have added at least one GMPCPP-tubulin subunit, our measurements of cap size support a model in which a single GTP subunit at the end of each of the 13 protofilaments of a microtubule is sufficient for stabilization. Depolymerization of a microtubule may be initiated by an exposed tubulin–GDP subunit at even a single position. These results have implications for the structure of microtubules and their means of regulation.