Yeast Immobilization in LentiKats®: A New Strategy for Xylitol Bioproduction from Sugarcane Bagasse

Summary A new PVA-hydrogel matrix for yeast cell immobilization for xylitol bioproduction from sugarcane bagasse was studied. Five repeated-batch fermentation runs were carried out in medium based on sugarcane bagasse hemicellulosic hydrolysate with reuse of the entrapped biocatalyst. The system performance as well as the metabolic behaviour of cells entrapped into the matrix were evaluated. The biocatalyst remained stable and exhibited a similar fermentative profile in all the successive batches, demonstrating the viability of the system. At the end of the run, an average xylitol production was observed of 35.1 g l⁻¹ and average xylitol yield and productivity of 0.58 g g⁻¹ and 0.49 g l⁻¹ h⁻¹, respectively.     

Improvement in lactic acid production from starch using α-amylase-secreting <Emphasis Type="Italic">Lactococcus lactis</Emphasis> cells adapted to maltose or starch

To achieve direct and efficient lactic acid production from starch, a genetically modified Lactococcus lactis IL 1403 secreting α-amylase, which was obtained from Streptococcus bovis 148, was constructed. Using this strain, the fermentation of soluble starch was achieved, although its rate was far from efficient (0.09 g l⁻¹ h⁻¹ lactate). High-performance liquid chromatography revealed that maltose accumulated during fermentation, and this was thought to lead to inefficient fermentation. To accelerate maltose consumption, starch fermentation was examined using L. lactis cells adapted to maltose instead of glucose. This led to a decrease in the amount of maltose accumulation in the culture, and, as a result, a more rapid fermentation was accomplished (1.31 g l⁻¹ h⁻¹ lactate). Maximum volumetric lactate productivity was further increased (1.57 g l⁻¹ h⁻¹ lactate) using cells adapted to starch, and a high yield of lactate (0.89 g of lactate per gram of consumed sugar) of high optical purity (99.2% of l-lactate) was achieved. In this study, we propose a new approach to lactate production by α-amylase-secreting L. lactis that allows efficient fermentation from starch using cells adapted to maltose or starch before fermentation.     

Lactic acid production from cellulosic waste by immobilized cells of Lactobacillus delbrueckii

Industrial waste corn cob residue (from xylose manufacturing) without pretreatment was hydrolyzed by cellulase and cellobiase. The cellulosic hydrolysate contained 52.4 g l⁻¹ of glucose and was used as carbon source for lactic acid fermentation by cells of Lactobacillus delbrueckii ZU-S2 immobilized in calcium alginate gel beads. The final concentration of lactic acid and the yield of lactic acid from glucose were 48.7 g l⁻¹ and 95.2%, respectively, which were comparative to the results of pure glucose fermentation. The immobilized cells were quite stable and reusable, and the average yield of lactic acid from glucose in the hydrolysate was 95.0% in 12 repeated batches of fermentation. The suitable dilution rate of continuous fermentation process was 0.13 h⁻¹, and the yield of lactic acid from glucose and the productivity were 92.4% and 5.746 g l⁻¹ h⁻¹, respectively. The production of lactic acid by simultaneous saccharification and fermentation (SSF) process was carried out in a coupling bioreactor, the final concentration of lactic acid was 55.6 g l⁻¹, the conversion efficiency of lactic acid from cellulose was 91.3% and the productivity was 0.927 g l⁻¹ h⁻¹. By using fed-batch technique in the SSF process, the final concentration of lactic acid and the productivity increased to 107.6 g l⁻¹ and 1.345 g l⁻¹ h⁻¹, respectively, while the dosage of cellulase per gram substrate decreased greatly. This research work should advance the bioconversion of renewable cellulosic resources and reduce environmental pollution.     

Production of lipase by high cell density fed-batch culture of Candida cylindracea

Candida cylindracea NRRL Y-17506 was grown to produce extracellular lipase from oleic acid as a carbon source. Through flask cultures, it was found that the optimum initial oleic acid concentration for cell growth was 20 g l⁻¹. However, high initial concentrations of oleic acid up to 50 g l⁻¹ were not inhibitory. The highest extracellular lipase activity obtained in flask culture was 3.0 U ml⁻¹ after 48 h with 5 g l⁻¹ of initial oleic acid concentration. Fed-batch cultures (intermittent and stepwise feeding) were carried out to improve cell concentration and lipase activity. For the intermittent feeding fed-batch culture, the final cell concentration was 52 g l⁻¹ and the extracellular lipase activity was 6.3 U ml⁻¹ at 138.5 h. Stepwise feeding fed-batch cultures were carried out to simulate an exponential feeding and to investigate the effects of specific growth rate (0.02, 0.04 and 0.08 h⁻¹) on cell growth and lipase production. The highest final cell concentration obtained was 90 g l⁻¹ when the set point of specific growth rate (μ_set) was 0.02 h⁻¹. High specific growth rate (0.04 and 0.08 h⁻¹) decreased extracellular lipase production in the later part of fed-batch cultures due to build-up of the oleic acid oversupplied. The highest extracellular lipase activity was 23.7 U ml⁻¹ when μ_set was 0.02 h⁻¹, while the highest lipase productivity was 0.31 U ml⁻¹ h⁻¹ at μ_set of 0.08 h⁻¹.     

Batch and repeated batch production of l(+)-lactic acid by Enterococcus faecalis RKY1 using wood hydrolyzate and corn steep liquor

Lactic acid production was investigated for batch and repeated batch cultures of Enterococcus faecalis RKY1, using wood hydrolyzate and corn steep liquor. When wood hydrolyzate (equivalent to 50 g l⁻¹ glucose) supplemented with 15–60 g l⁻¹ corn steep liquor was used as a raw material for fermentation, up to 48.6 g l⁻¹ of lactic acid was produced with, volumetric productivities ranging between 0.8 and 1.4 g l⁻¹ h⁻¹. When a medium containing wood hydrolyzate and 15 g l⁻¹ corn steep liquor was supplemented with 1.5 g l⁻¹ yeast extract, we observed 1.9-fold and 1.6-fold increases in lactic acid productivity and cell growth, respectively. In this case, the nitrogen source cost for producing 1 kg lactic acid can be reduced to 23% of that for fermentation from wood hydrolyzate using 15 g l⁻¹ yeast extract as a single nitrogen source. In addition, lactic acid productivity could be maximized by conducting a cell-recycle repeated batch culture of E. faecalis RKY1. The maximum productivity for this process was determined to be 4.0 g l⁻¹ h⁻¹.     

High-yield production of erythritol from raw glycerol in fed-batch cultures of <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis>

An acetate-negative mutant of Yarrowia lipolytica Wratislavia K1 was selected that, when grown with 300 g raw glycerol l⁻¹ at pH 3, produced 170 g erythritol l⁻¹ after 7 days, corresponding to a 56% yield and a productivity of 1 g l⁻¹ h⁻¹. The Wratislavia K1 strain did not produce citric acid.     

Optimization of lactic acid production by immobilized <Emphasis Type="Italic">Lactococcus lactis</Emphasis> IO-1

Production of lactic acid from glucose by immobilized cells of Lactococcus lactis IO-1 was investigated using cells that had been immobilized by either entrapment in beads of alginate or encapsulation in microcapsules of alginate membrane. The fermentation process was optimized in shake flasks using the Taguchi method and then further assessed in a production bioreactor. The bioreactor consisted of a packed bed of immobilized cells and its operation involved recycling of the broth through the bed. Both batch and continuous modes of operation of the reactor were investigated. Microencapsulation proved to be the better method of immobilization. For microencapsulated cells at immobilized cell concentration of 5.3 g l⁻¹, the optimal production medium had the following initial concentrations of nutrients (g l⁻¹): glucose 45, yeast extract 10, beef extract 10, peptone 7.5 and calcium chloride 10 at an initial pH of 6.85. Under these conditions, at 37 °C, the volumetric productivity of lactic acid in shake flasks was 1.8 g l⁻¹ h⁻¹. Use of a packed bed of encapsulated cells with recycle of the broth through the bed, increased the volumetric productivity to 4.5 g l⁻¹ h⁻¹. The packed bed could be used in repeated batch runs to produce lactic acid.     

Conversion of oleic acid to 10-hydroxystearic acid by whole cells of <Emphasis Type="Italic">Stenotrophomonas nitritireducens</Emphasis>

The optimal reaction conditions for the conversion of oleic acid to 10-hydroxystearic acid by whole cells of Stenotrophomonas nitritireducens were: pH 7.5, 35°C, 0.05% (w/v) Tween 80, 20 g cells l⁻¹, and 30 g oleic acid l⁻¹ in an anaerobic atmosphere. Under these conditions, the cells produced 31.5 g 10-hydroxystearic acid l⁻¹ over 4 h with a conversion yield of 100% (mol/mol) and a productivity of 7.9 g l⁻¹ h⁻¹, indicating that oleic acid was converted completely to 10-hydroxystearic acid, with no detectable byproduct. This is the highest concentration, productivity, and yield of 10-hydroxystearic acid from oleic acid reported thus far.     

Effect of growth rate on the production of<Emphasis Type="SmallCaps">l</Emphasis>-proline in the fed-batch culture of<Emphasis Type="Italic">Corynebacterium acetoacidophilum</Emphasis>

Corynebacterium acetoacidophilum RYU3161 was cultivated in al-histidine-limited fed-batch culture. To investigate the effect of cell growth on thel-proline production, 5l fed-batch culture was performed using an exponential feeding rate to obtain the specific growth rates (μ) of 0.04, 0.06, 0.08, and 0.1 h⁻¹. The results show that the highest production ofl-proline was obtained at μ=0.04 h⁻¹. The specificl-proline production rate (Q_p) increased proportionally as a function of the specific growth rate, but decreased after it revealed the maximum value at μ=0.08 h⁻¹. Thus, the highest productivity ofl-proline was 1.66 g L⁻¹ h⁻¹ at μ=0.08 h⁻¹. The results show that the production of L-proline inC. acetoacidophilum RYU3161 has mixed growth-associated characteristics.     

Fermentation of pretreated sugarcane bagasse hemicellulose hydrolysate to ethanol by <Emphasis Type="Italic">Pachysolen tannophilus</Emphasis>

Sugarcane bagasse hemicellulose hydrolysates, pretreated by either over-liming or electrodialysis and, supplemented with nutrient materials, were fermented to ethanol using Pachysolen tannophilus DW06. Compared with detoxification by over-liming, detoxification by electrodialysis decreased the loss of sugar and increased the acetic acid removal, leading to better fermentability. A batch culture with electrodialytically pretreated hydrolysate as substrate was developed giving 21 g ethanol l⁻¹ with a yield of 0.35 g g⁻¹ sugar and productivity of 0.59 g l⁻¹ h⁻¹.     

Ethanol production from sweet sorghum juice in batch and fed-batch fermentations by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

Sweet sorghum juice supplemented with 0.5% ammonium sulphate was used as a substrate for ethanol production by Saccharomyces cerevisiae TISTR 5048. In batch fermentation, kinetic parameters for ethanol production depended on initial cell and sugar concentrations. The optimum initial cell and sugar concentrations in the batch fermentation were 1 × 10⁸ cells ml⁻¹ and 24 °Bx respectively. At these conditions, ethanol concentration produced (P), yield (Y _ps) and productivity (Q _p ) were 100 g l⁻¹, 0.42 g g⁻¹ and 1.67 g l⁻¹ h⁻¹ respectively. In fed-batch fermentation, the optimum substrate feeding strategy for ethanol production at the initial sugar concentration of 24 °Bx was one-time substrate feeding, where P, Y _ps and Q _p were 120 g l⁻¹, 0.48 g g⁻¹ and 1.11 g l⁻¹ h⁻¹ respectively. These findings suggest that fed-batch fermentation improves the efficiency of ethanol production in terms of ethanol concentration and product yield.     

Production of 1,3-Propanediol by Clostridium butyricum VPI 3266 in continuous cultures with high yield and productivity

The effects of dilution rate and substrate feed concentration on continuous glycerol fermentation by Clostridium butyricum VPI 3266, a natural 1,3-propanediol producer, were evaluated in this work. A high and constant 1,3-propanediol yield (around 0.65 mol/mol), close to the theoretical value, was obtained irrespective of substrate feed concentration or dilution rate. Improvement of 1,3-propanediol volumetric productivity was achieved by increasing the dilution rate, at a fixed feed substrate concentration of 30, 60 or 70 g l⁻¹. Higher 1,3-propanediol final concentrations and volumetric productivities were also obtained when glycerol feed concentration was increased from 30 to 60 g l⁻¹, at D=0.05–0.3 h⁻¹, and from 60–70 g l⁻¹, at D=0.05 and 0.1 h⁻¹·30 g l⁻¹ of 1,3-propanediol and the highest reported value of productivity, 10.3 g l⁻¹ h⁻¹, was achieved at D=0.30 h⁻¹ and 60 g l⁻¹ of feed glycerol. A switch to an acetate/butyrate ratio higher than one was observed for 60 g l⁻¹ of feed glycerol and a dilution rate higher than 0.10 h⁻¹; moreover, at D=0.30 h⁻¹ 3-hydroxypropionaldehyde accumulation was observed for the first time in the fermentation broth of C. butyricum.     

Carbon-limited fed-batch production of medium-chain-length polyhydroxyalkanoates from nonanoic acid by <Emphasis Type="Italic">Pseudomonas putida</Emphasis> KT2440

Pseudomonas putida KT2440 grew on glucose at a specific rate of 0.48 h⁻¹ but accumulated almost no poly-3-hydroxyalkanoates (PHA). Subsequent nitrogen limitation on nonanoic acid resulted in the accumulation of only 27% medium-chain-length PHA (MCL-PHA). In contrast, exponential nonanoic acid-limited growth (μ = 0.15 h⁻¹) produced 70 g l⁻¹ biomass containing 75% PHA. At a higher exponential feed rate (μ = 0.25 h⁻¹), the overall productivity was increased but less biomass (56 g l⁻¹) was produced due to higher oxygen demand, and the biomass contained less PHA (67%). It was concluded that carbon-limited exponential feeding of nonanoic acid or related substrates to cultures of P. putida KT2440 is a simple and highly effective method of producing MCL-PHA. Nitrogen limitation is unnecessary.     

Propionic acid fermentation from glycerol: comparison with conventional substrates

Instead of the conventional carbon sources used for propionic acid biosynthesis, the utilization of glycerol is considered here, since the metabolic pathway involved in the conversion of glycerol to propionic acid is redox-neutral and energetic. Three strains, Propionibacterium acidipropionici, Propionibacterium acnes and Clostridium propionicum were tested for their ability to convert glycerol to propionic acid during batch fermentation with initially 20 g/l glycerol. P. acidipropionici showed higher efficiency in terms of fermentation time and conversion yield than did the other strains. The fermentation profile of this bacterium consisted in propionic acid as the major product (0.844 mol/mol), and in minimal by-products: succinic (0.055 mol/mol), acetic (0.023 mol/mol) and formic (0.020 mol/mol) acids and n-propanol (0.036 mol/mol). The overall propionic acid productivity was 0.18 g l⁻¹h⁻¹. A comparative study with glucose and lactic acid as carbon sources showed both less diversity in end-product composition and a 17% and 13% lower propionic acid conversion yield respectively than with glycerol. Increasing the initial glycerol concentration resulted in an enhanced productivity up to 0.36 g l⁻¹h⁻¹ and in a maximal propionic acid concentration of 42 g/l, while a slight decrease of the conversion yield was noticed. Such a propionic acid production rate was similar or higher than the values obtained with lactic acid (0.35 g l⁻¹h⁻¹) or glucose (0.28 g l⁻¹h⁻¹). These results demonstrated that glycerol is a carbon source of interest for propionic acid production. Received: 15 July 1996 / Received revision: 11 November 1996 / Accepted: 11 November 1996     

Lactic acid production from sugar-cane juice by a newly isolated Lactobacillus sp.

A newly isolated sucrose-tolerant, lactic acid bacterium, Lactobacillus sp. strain FCP2, was grown on sugar-cane juice (125 g sucrose l⁻¹, 8 g glucose l⁻¹ and 6 g fructose l⁻¹) for 5 days and produced 104 g lactic acid l⁻¹ with 90% yield. A higher yield (96%) and productivity (2.8 g l⁻¹ h⁻¹) were obtained when strain FCP2 was cultured on 3% w/v (25 g sucrose l⁻¹, 2 g glucose l⁻¹ and 1 g fructose l⁻¹) sugar-cane juice for 10 h. Various cheap nitrogen sources such as silk worm larvae, beer yeast autolysate and shrimp wastes were also used as a substitute to yeast extract.     

Influence of agitation and aeration on growth and antibiotic production by <Emphasis Type="Italic">Xenorhabdus nematophila</Emphasis>

The effect of agitation and aeration on the growth and antibiotic production by Xenorhabdus nematophila YL001 grown in batch cultures were investigated. Efficiency of aeration and agitation was evaluated through the oxygen mass transfer coefficient (K _L a). With increase in K _L a, the biomass and antibiotic activity increased. Activity units of antibiotic and dry cell weight were increased to 232 U ml⁻¹ and 19.58 g l⁻¹, respectively, productivity in cell and antibiotic was up more than 30% when K _L a increased from 115.9 h⁻¹ to 185.7 h⁻¹. During the exponential growth phase, DO concentration was zero, the oxygen supply was not sufficient. So, based on process analysis, a three-stage oxygen supply control strategy was used to improved the DO concentration above 30% by controlling the agitation speed and aeration rate. The dry cell weight and activity units of antibiotic were further increased to 24.22 g l⁻¹ and 249 U ml⁻¹, and were improved by 24.0% and 7.0%, compared with fermentation at a constant agitation speed and a constant aeration rate (300 rev min⁻¹, 2.5 l min⁻¹).     

Production of fructose from inulin using mixed inulinases from <Emphasis Type="Italic">Aspergillus niger</Emphasis> and <Emphasis Type="Italic">Candida guilliermondii</Emphasis>

Two new effective microbial producers of inulinases were isolated from Jerusalem artichoke tubers grown in Thailand and identified as Aspergillus niger TISTR 3570 and Candida guilliermondii TISTR 5844. The inulinases produced by both these microorganisms were appropriate for hydrolysing inulin to fructose as the principal product. An initial inulin concentration of ∼100 g l⁻¹ and the enzyme concentration of 0.2 U g⁻¹ of substrate, yielded 37.5 g l⁻¹ of fructose in 20 h at 40°C when A. niger TISTR 3570 inulinase was the biocatalyst. The yield of fructose on inulin was 0.39 g g⁻¹. Under identical conditions, the yeast inulinase afforded 35.3 g l⁻¹ of fructose in 25 h. The fructose yield was 0.35 g g⁻¹ of substrate. The fructose productivities were 1.9 g l⁻¹ h⁻¹ and 1.4 g l⁻¹ h⁻¹ for the mold and yeast enzymes, respectively. After 20 h of reaction, the mold enzyme hydrolysate contained 53% fructose and more than 41% of initial inulin had been hydrolysed. Using the yeast enzymes, the hydrolysate contained nearly 38% fructose at 25 h and nearly 36% of initial inulin had been hydrolysed. The A. niger TISTR 3570 inulinases exhibited both endo-inulinase and exo-inulinase activities. In contrast, the yeast inulinases displayed mainly exo-inulinase activity. The mold and yeast crude inulinases mixed in the activity ratio of 5:1 proved superior to individual crude inulinases in hydrolysing inulin to fructose. The enzyme mixture provided a better combination of endo- and exo-inulinase activities than did the crude extracts of either the mold or the yeast individually.     

Isolation of <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> mutants for heterologous protein production from a double proteinase gene disruptant

The recombinant Pichia pastoris harboring an improved methionine adenosyltransferase (MAT) shuffled gene was employed to biosynthesize S-adenosyl-l-methionine (SAM). Two l-methionine (l-Met) addition strategies were used to supply the precursor: the batch addition strategy (l-Met was added separately at three time points) and the continuous feeding strategies (l-Met was fed continuously at the rate of 0.1, 0.2, and 0.5 g l⁻¹ h⁻¹, respectively). SAM accumulation, l-Met conversion rate, and SAM productivity with the continuous feeding strategies were all improved over the batch addition strategy, which reached 8.46 ± 0.31 g l⁻¹, 41.7 ± 1.4%, and 0.18 ± 0.01 g l⁻¹ h⁻¹ with the best continuous feeding strategy (0.2 g l⁻¹ h⁻¹), respectively. The bottleneck for SAM production with the low l-Met feeding rate (0.1 g L⁻¹ h⁻¹) was the insufficient l-Met supply. The analysis of the key enzyme activities indicated that the tricarboxylic acid cycle and glycolytic pathway were reduced with the increasing l-Met feeding rate, which decreased the adenosine triphosphate (ATP) synthesis. The MAT activity also decreased as the l-Met feeding rate rose. The reduced ATP synthesis and MAT activity were probably the reason for the low SAM accumulation when the l-Met feeding rate reached 0.5 g l⁻¹ h⁻¹.     

Kinetics of kojic acid fermentation by Aspergillus flavus using different types and concentrations of carbon and nitrogen sources

Kinetics of kojic acid fermentation by Aspergillus flavus Link 44-1 using various sources of carbon [glucose, xylose, sucrose, starch, maltose, lactose or fructose] and nitrogen [NH₄Cl, (NH₄)₂S₂O₈, (NH₄)₂NO₃, yeast extract or peptone] were analyzed using models based on logistic and Luedeking–Piret equations. The highest kojic acid production (39.90 g l⁻¹) in submerged batch fermentation was obtained when 100 g l⁻¹ glucose was used as a carbon source. Organic nitrogen sources such as peptone and yeast extract were favorable for kojic acid production as compared to inorganic nitrogen sources. Yeast extract at 5 g l⁻¹ was optimal. The optimal carbon to nitrogen (C/N) ratio for kojic acid fermentation was 93.3. In a resuspended cell system, the rate of glucose conversion to kojic acid by cell-bound enzymes increased with increasing glucose concentration up to 70 g l⁻¹, suggesting that the reaction followed the Michaelis–Menten enzyme kinetic model. The value of K _m and V _max for the reaction was 18.47 g l⁻¹ glucose and 0.154 g l⁻¹ h⁻¹, respectively. Journal of Industrial Microbiology & Biotechnology (2000) 25, 20–24. Received 13 October 1999/ Accepted in revised form 02 April 2000     

Expression of glf Z.m. increases D-mannitol formation in whole cell biotransformation with resting cells of Corynebacterium glutamicum

A recombinant oxidation/reduction cycle for the conversion of D-fructose to D-mannitol was established in resting cells of Corynebacterium glutamicum. Whole cells were used as biocatalysts, supplied with 250 mM sodium formate and 500 mM D-fructose at pH 6.5. The mannitol dehydrogenase gene (mdh) from Leuconostoc pseudomesenteroides was overexpressed in strain C. glutamicum ATCC 13032. To ensure sufficient cofactor [nicotinamide adenine dinucleotide (reduced form, NADH)] supply, the fdh gene encoding formate dehydrogenase from Mycobacterium vaccae N10 was coexpressed. The recombinant C. glutamicum cells produced D-mannitol at a constant production rate of 0.22 g (g cdw)⁻¹ h⁻¹. Expression of the glucose/fructose facilitator gene glf from Zymomonas mobilis in C. glutamicum led to a 5.5-fold increased productivity of 1.25 g (g cdw)⁻¹ h⁻¹, yielding 87 g l⁻¹ D-mannitol from 93.7 g l⁻¹ D-fructose. Determination of intracellular NAD(H) concentration during biotransformation showed a constant NAD(H) pool size and a NADH/NAD⁺ ratio of approximately 1. In repetitive fed-batch biotransformation, 285 g l⁻¹ D-mannitol over a time period of 96 h with an average productivity of 1.0 g (g cdw)⁻¹ h⁻¹ was formed. These results show that C. glutamicum is a favorable biocatalyst for long-term biotransformation with resting cells. Dedicated to Prof. Hermann Sahm on the occasion of his 65th birthday.