A flow cytometric technique for quantification and differentiation of bacteria in bulk tank milk

AIMS: The present study describes a flow cytometric technique for quantification and differentiation of bacteria in bulk tank milk according to the main cause of elevated counts. METHODS AND RESULTS: A total of 75 Danish bulk tank milk samples exceeding the grading level of 3.0 x 10(4) CFU ml(-1) were examined by both flow cytometry and traditional microbiological analyses. The correlation coefficient (r) between the two methods was 0.71. For the differential analyses of the dominant bacterial populations four different parameters were used to give a species-characteristic pattern. The four parameters were as follows: staining with Oregon Green conjugated wheat germ agglutinin that binds to the cell wall of bacteria, staining with hexidium iodide that binds to all bacterial DNA, the flow cytometric forward scatter and the flow cytometric side scatter. Three regions in the flow cytometric plot were defined: region 1 includes bacteria mainly associated with poor hygiene, region 2 includes psychrotrophic hygiene bacteria and region 3 includes bacteria mainly related to mastitis. The ability of the flow cytometric technique to predict the main cause of elevated bacterial counts on routine samples was examined. Comparing these results with results obtained by traditional microbiological analyses for identification showed that for 81% of the samples the two techniques agreed on the main cause of an elevated bacterial count. CONCLUSIONS: The ability of the presented flow cytometric technique to enumerate and differentiate bacteria in bulk tank milk according to the main cause of elevated counts was demonstrated. SIGNIFICANCE AND IMPACT OF THE STUDY: This study described the first step in development of a technique suitable for routine analyses of bulk tank milk samples. A technique indicating the main cause of an elevated count will enable the farmer to eliminate the contamination source within a short time limit.     

Ion chromatography of azide in pharmaceutical protein samples with high chloride concentration using suppressed conductivity detection

Methods based on reversed-phase liquid chromatography with UV detection of 4-nitrobenzoyl- or 3,5-dinitrobenzoyl azide derivatives lack in accuracy and stability of derivatives to be applied for azide determination in pharmaceutical protein samples with high sodium chloride concentrations. This paper describes a sensitive and selective ion chromatographic method, with simple sample preparation and suppressed conductivity detection, developed for trace determination of azide in protein samples containing sodium chloride in concentrations as high as 11.6 g L(-1). Anion exchange stationary phase with quaternary alkyl amine functional groups and gradient elution with sodium hydroxide enabled good resolution of anions with similar retention times: azide, bromide and nitrate, as well as chloride whose retention time was shorter than azide's. Anions with high affinity to stationary phase (phosphate and citrate) were also eluted within acceptable analysis time of 32 min. The stability of sample solutions and the method selectivity, accuracy, precision and sensitivity satisfied the validation criteria of international organizations competent for pharmaceutical industry. The detection and quantitation limit ranges of sodium azide in protein samples were 0.007-0.02 mg L(-1) and 0.02-0.06 mg L(-1), respectively. Both limits increased with the concentration of sodium chloride.     

The plastid translocon component TOC36 exhibits an affinity for the bacterial protein translocation process

The 44-kDa envelope polypeptides are active components of the plastid translocon, but their role in plastid protein import remains elusive. One form from Brassica napus (bnToc36B) was previously observed to exert a significant overall effect on bacterial protein translocation, but the nature of the influence requires further characterization. The experimental strategies employed in this study thus focus specifically on the nature of the bnToc36B-bacterial Sec translocon relationship to gain an understanding of Toc36's function. BnToc36B's presence in bacteria created a number of effects related to the protein transport process that together point to functional interactions with the bacterial Sec translocon. These effects are (1) reduced sensitivity to azide impairment as measured by a higher recovery rate from azide treatment, (2) reduced sensitivity to suboptimal temperatures manifesting as sustained levels of protein synthesis and translocation, (3) sustained levels of growth and beta-lactamase transport in high ampicillin concentrations, and (4) evidence for a physical affinity for the bacterial translocon. A reduction in overall SecA levels and a more stable SecA profile, when subjected to azide treatment, was observed in bnToc36B-containing bacteria. The implications of the bacterial data are discussed.     

Bacterial membrane potential analyzed by spectrofluorocytometry

Cells ofMycobacterium smegmatis 607 in their late exponential growth were stained with rhodamine 123. The stained bacterial populations were analyzed by fluorocytometry and spectrofluorometry. Responses of the bacterial membrane potential to agents such as valinomycin, graimicidin, nigericin, and sodium azide were analyzed with the two techniques mentioned above. The results have shown that the flow cytometric technique allowed detection of changes in bacterial membrane potential and allowed population response analysis to ionophore activity. The applications of this technique are promising for the rapid detection of membrane potential mutants and for the estimation of the viability of a bacterial population.     

Determination of the sensitivity of bacteria to barium ions,a taxonomic marker of the genus <Emphasis Type="Italic">Pseudomonas</Emphasis>

Comparative efficacy of the determination of the sensitivity of bacterial cells to barium ions was evaluated on a synthetic nutrient medium, FMH agar, Mueller-Hinton agar, and AGV agar. The synthetic nutrient medium developed for this study contained L-proline and L-glutamine as the sole nitrogen and carbon source, which promoted growth of all Pseudomonas strains and ensured the minimal level of barium binding. The sensitivity of 80 strains belonging to 11 Pseudomonas species, including the type strains, as well as of 80 strains of 22 other bacterial species, was studied. The sensitivity of bacteria to barium ions was determined by using serial dilutions of barium chloride in the nutrient medium. The highest level of analytical sensitivity of pseudomonads to barium ions was determined on the synthetic nutrient medium: the minimal inhibitory concentration (MIC) values of barium chloride ranged from 0.5 to 6 g/L, the MIC₉₀ value was 2 g/L. At the same time, 86.1% of all strains of fluorescent Pseudomonas species produced fluorescein on the control BaCl₂-free synthetic nutrient medium. For representatives of other genera grown on all the studied nutrient media, the MIC values of barium chloride ranged from 20 to 50 g/L. The proposed method for determination of the sensitivity of bacteria to barium ions using the synthetic nutrient medium with 6 g/L of barium chloride as a criterion for the classification of barium-sensitive strains to the genus Pseudomonas is suitable for standardization.     

Effects of deflected droplet electrostatic cell sorting on the viability and exoproteolytic activity of bacterial cultures and marine bacterioplankton

The cell-sorting capability of flow cytometers makes it possible to isolate specific populations of cells with pre-defined cytometric characteristics. A better knowledge of the biological effects of the sorting process is necessary for the future cell sorting applications. In this paper we report the effects of flow cytometric sorting on bacterial viability and exoproteolytic activity (EPA) of bacterial cultures and marine bacterioplankton. Sorting bacterial cultures and bacterioplankton samples reduce viability as assessed by plate counts and produce variations in the exoproteolytic activity. These effects indicate that deflected electrostatic sorting may significantly alter the biological properties of the sorted bacteria.     

Determination of Complement-Mediated Killing of Bacteria by Viability Staining and Bioluminescence

Complement-mediated killing of bacteria was monitored by flow cytometric, luminometric, and conventional plate counting methods. A flow cytometric determination of bacterial viability was carried out by using dual staining with a LIVE/DEAD BacLight bacterial viability kit. In addition to the viable cell population, several other populations emerged in the fluorescence histogram, and there was a dramatic decrease in the total cell count in the light-scattering histogram in the course of the complement reaction. To permit luminometric measurements, Bacillus subtilis and Escherichia coli were made bioluminescent by expressing an insect luciferase gene. Addition of substrate after the complement reaction resulted in bioluminescence, the level of which was a measure of the viable cell population. All three methods gave essentially the same killing rate, suggesting that the bacteriolytic activity of serum complement can be measured rapidly and conveniently by using viability stains or bioluminescence. In principle, any bacterial strain can be used for viability staining and flow cytometric analysis. For the bioluminescence measurements genetically engineered bacteria are needed, but the advantage is that it is possible to screen automatically a large number of samples.     

Precipitation of barite by Myxococcus xanthus: possible implications for the biogeochemical cycle of barium

Bacterial precipitation of barite (BaSO(4)) under laboratory conditions is reported for the first time. The bacterium Myxococcus xanthus was cultivated in a solid medium with a diluted solution of barium chloride. Crystallization occurred as a result of the presence of live bacteria and the bacterial metabolic activity. A phosphorous-rich amorphous phase preceded the more crystalline barite formation. These experiments may indicate the involvement of bacteria in the barium biogeochemical cycle, which is closely related to the carbon cycle.     

Investigations of the localisation of bacterial activity on sandstone from ancient monuments

Methods were investigated for the determination of activity levels of bacteria on sandstone using the reduction of 2-(4-iodophenyl)-3-(4 nitrophenyl)-5-phenyl tetrazolium chloride (INT) to INT-formazan as a measure of dehydrogenase activity. A microscopy technique, based on use of acridine orange with bright-field illumination, was developed which gave a good visual image of bacterial cells, including those containing INT-formazan. Surveys at two monuments, Portchester Castle and Tintern Abbey, were carried out using this method which showed that between 20.7 and 51.9% of bacterial cells present in situ were active. Extraction of INT-formazan directly from the stone using methanol indicated that bacteria were tightly bound to stone particles and that microscopic methods would underestimate counts of bacteria. Surveys of five monuments using the extraction method showed that microbial populations on sandstone in situ were active but activity could not be related to decay state of the stone.     

Sensitive determination of microbial growth by nucleic acid staining in aqueous suspension

The determination of cell numbers or biomass in laboratory cultures or environmental samples is usually based on turbidity measurements, viable counts, biochemical determinations (e.g., protein and lipid measurements), microscopic counting, or recently, flow cytometric analysis. In the present study, we developed a novel procedure for the sensitive quantification of microbial cells in cultures and most-probable-number series. The assay combines fluorescent nucleic acid staining and subsequent fluorescence measurement in suspension. Six different fluorescent dyes (acridine orange, DAPI [4',6'-diamidino-2-phenylindole], ethidium bromide, PicoGreen, and SYBR green I and II) were evaluated. SYBR green I was found to be the most sensitive dye and allowed the quantification of 50,000 to up to 1.5 x 10(8) Escherichia coli cells per ml sample. The rapid staining procedure was robust against interference from rRNA, sample fixation by the addition of glutaric dialdehyde, and reducing agents such as sodium dithionite, sodium sulfide, and ferrous sulfide. It worked well with phylogenetically distant bacterial and archaeal strains. Excellent agreement with optical density measurements of cell increases was achieved during growth experiments performed with aerobic and sulfate-reducing bacteria. The assay offers a time-saving, more sensitive alternative to epifluorescence microscopy analysis of most-probable-number dilution series. This method simplifies the quantification of microbial cells in pure cultures as well as enrichments and is particularly suited for low cell densities.     

Sensitive Determination of Microbial Growth by Nucleic Acid Staining in Aqueous Suspension

The determination of cell numbers or biomass in laboratory cultures or environmental samples is usually based on turbidity measurements, viable counts, biochemical determinations (e.g., protein and lipid measurements), microscopic counting, or recently, flow cytometric analysis. In the present study, we developed a novel procedure for the sensitive quantification of microbial cells in cultures and most-probable-number series. The assay combines fluorescent nucleic acid staining and subsequent fluorescence measurement in suspension. Six different fluorescent dyes (acridine orange, DAPI [4′,6′-diamidino-2-phenylindole], ethidium bromide, PicoGreen, and SYBR green I and II) were evaluated. SYBR green I was found to be the most sensitive dye and allowed the quantification of 50,000 to up to 1.5 × 10⁸ Escherichia coli cells per ml sample. The rapid staining procedure was robust against interference from rRNA, sample fixation by the addition of glutaric dialdehyde, and reducing agents such as sodium dithionite, sodium sulfide, and ferrous sulfide. It worked well with phylogenetically distant bacterial and archaeal strains. Excellent agreement with optical density measurements of cell increases was achieved during growth experiments performed with aerobic and sulfate-reducing bacteria. The assay offers a time-saving, more sensitive alternative to epifluorescence microscopy analysis of most-probable-number dilution series. This method simplifies the quantification of microbial cells in pure cultures as well as enrichments and is particularly suited for low cell densities.     

Precipitation of Barite by Myxococcus xanthus: Possible Implications for the Biogeochemical Cycle of Barium

Bacterial precipitation of barite (BaSO₄) under laboratory conditions is reported for the first time. The bacterium Myxococcus xanthus was cultivated in a solid medium with a diluted solution of barium chloride. Crystallization occurred as a result of the presence of live bacteria and the bacterial metabolic activity. A phosphorous-rich amorphous phase preceded the more crystalline barite formation. These experiments may indicate the involvement of bacteria in the barium biogeochemical cycle, which is closely related to the carbon cycle.     

Are the actively respiring cells (CTC+) those responsible for bacterial production in aquatic environments?

The 5-cyano-2,3-ditolyl tetrazolium chloride (CTC) staining method is commonly and increasingly used to detect and to enumerate actively respiring cells (CTC+ cells) in aquatic systems. However, this method remains controversial since some authors promote this technique while others pointed out several drawbacks of the method. Using flow cytometry (FCM), we showed that CTC staining kinetics vary greatly from one sample to another. Therefore, there is no universal staining protocol that can be applied to aquatic bacterial communities. Furthermore, using (3)H-leucine incorporation, it was shown that the CTC dye has a rapid toxic effect on bacterial cells by inhibiting protein synthesis, a key physiological function. The coupling of radioactive labelling with cell sorting by FCM suggested that CTC+ cells contribute to less than 60% of the whole bacterial activity determined at the community level. From these results, it is clearly demonstrated that the CTC method is not valid to detect active bacteria, i.e. cells responsible for bacterial production.     

Determination of bacterial cell surface hydrophobicity of single cells in cultures and in wastewater in situ

Bacterial cell surface hydrophobicity is one of the most important factors that influence bacterial adhesion. A new method, microsphere adhesion to cells, for measuring bacterial cell surface hydrophobicity was developed. Microsphere adhesion to cells is based on microscopic enumeration of hydrophobic, fluorescent microspheres attaching to the bacterial surface. Cell surface hydrophobicity estimated by microsphere adhesion to cells correlates well with adhesion of bacteria to hydrocarbons or hydrophobic interaction chromatography for a set of hydrophilic and hydrophobic bacteria (linear correlation coefficients, R², were 0.845 and 0.981 respectively). We also used microsphere adhesion to cells to investigate the in situ properties of individual free-living bacteria directly in activated sludge. Results showed that the majority of the bacteria were hydrophilic, indicating the importance of cell surface hydrophobicity for bacterial adhesion in sludge, and for the overall success of the wastewater treatment process.     

A method for quantifying pulmonary Legionella pneumophila infection in mouse lungs by flow cytometry

ABSTRACT: BACKGROUND: Pulmonary load of Legionella pneumophila in mice is normally determined by counting serial dilutions of bacterial colony forming units (CFU) on agar plates. This process is often tedious and time consuming. We describe a novel, rapid and versatile flow cytometric method that detects bacteria phagocytosed by neutrophils. FINDINGS: Mice were infected with L. pneumophila via intratracheal or intranasal administration. At various times after bacteria inoculation, mouse lungs were harvested and analysed concurrently for bacterial load by colony counting and flow cytometry analysis. The number of L. pneumophila-containing neutrophils correlated strongly with CFU obtained by bacteriological culture. CONCLUSIONS: This technique can be utilised to determine pulmonary bacterial load and may be used in conjunction with other flow cytometric based analyses of the resulting immune response.     

A comparative study of carboxyfluorescein diacetate and carboxyfluorescein diacetate succinimidyl ester as indicators of bacterial activity

Staining bacteria with esterified fluorogenic substrates followed by flow cytometric analysis offers a means for rapid detection of metabolically active bacteria. Flow cytometry (FCM) was used to assess carboxyfluorescein diacetate (CFDA) and carboxyfluorescein diacetate succinimidyl ester (CFDA/SE) as indicators of bacterial activity for cultured bacteria, including Aeromonas hydrophila, Bacillus subtilis, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus epidermidis and bacteria from environmental waters. In theory, CFDA/SE should be a better indicator of metabolic bacterial activity compared to CFDA due to greater intracellular retention of the fluorescent product. Qualitative and quantitative analysis of exponential phase cultures, mixtures of active and inactive cells and bacteria from environmental waters revealed CFDA was successful in detecting active bacteria, whereas CFDA/SE was not. CFDA/SE labelled inactive cells with intensities equal to that of the active population and could not even discriminate between bacteria in exponential phase growth and a fixed cell preparation. We propose that the specific mode of action of the succinimidyl ester (SE) group in combination with the nonenzymatic aqueous hydrolysis of the CFDA moiety results in the nonspecific labelling of all cells, irrespective of their metabolic state. This study shows that CFDA/SE is a poor marker of bacterial activity.     

Online monitoring of Escherichia coli ghost production

Controlled expression of cloned phi X174 gene E in gram-negative bacteria results in lysis of the bacteria by the formation of a transmembrane tunnel structure built through the cell envelope complex. Production of bacterial ghosts is routinely monitored by classical microbiological procedures. These include determination of the turbidity of the culture and the total number of cells and the number of reproductive cells present during the time course of growth and lysis. Although conceptually simple, these methods are labor intensive and time consuming, providing a complete set of results after the determination of viable cell counts. To avoid culturing methods for bacterial growth, an alternative flow cytometric procedure is presented for the quantification of ghosts and polarized, as well as depolarized, nonlysed cells within a culture. For this method, which is based on the discriminatory power of the membrane potential-sensitive dye bis-(1,3-dibutylbarbituric acid) trimethine oxonol, a staining protocol was developed and optimized for the maximum discrepancy in fluorescence between bacterial ghosts and viable cells. The total quantitative analysis procedure takes less than 2 min. The results derived from classical or cytometric analyses correlate with respect to the total cell numbers and the viability of the culture.     

In situ abundance and carbon fixation activity of distinct anoxygenic phototrophs in the stratified seawater lake Rogoznica

Sulphide-driven anoxygenic photosynthesis is an ancient microbial metabolism that contributes significantly to inorganic carbon fixation in stratified, sulphidic water bodies. Methods commonly applied to quantify inorganic carbon fixation by anoxygenic phototrophs, however, cannot resolve the contributions of distinct microbial populations to the overall process. We implemented a straightforward workflow, consisting of radioisotope labelling and flow cytometric cell sorting based on the distinct autofluorescence of bacterial photopigments, to discriminate and quantify contributions of co-occurring anoxygenic phototrophic populations to in situ inorganic carbon fixation in environmental samples. This allowed us to assign 89.3% ± 7.6% of daytime inorganic carbon fixation by anoxygenic phototrophs in Lake Rogoznica (Croatia) to an abundant chemocline-dwelling population of green sulphur bacteria (dominated by Chlorobium phaeobacteroides), whereas the co-occurring purple sulphur bacteria (Halochromatium sp.) contributed only 1.8% ± 1.4%. Furthermore, we obtained two metagenome assembled genomes of green sulphur bacteria and one of a purple sulphur bacterium which provides the first genomic insights into the genus Halochromatium, confirming its high metabolic flexibility and physiological potential for mixo- and heterotrophic growth.     

Flow cytometric determination of circulating immune complexes with the indirect granulocyte phagocytosis test

A method for the determination of circulating immune complexes (CIC) was adapted for flow cytometric analysis. Human granulocytes were used to phagocytose IgG-bearing CIC of serum from systemic lupus erythematosus (SLE) patients. A method for labeling the phagocytosed CIC with FITC-conjugated anti-human IgG was developed where the granulocytes remain in suspension during fixation and labeling. The fluorescence per cell, measured with a flow cytometer, is a measure of the total amount of the phagocytosed IgG. The results indicate that a rapid and quantitative method for the detection and measurement of phagocytosed CIC is possible using the flow cytometer.