Free and centrosome-attached microtubules: Quantitative analysis and modeling of two-component system

In cultivated in vitro interphase animal cells, microtubules form a network whose density is highest in the central cell area, in the region of centrosome, and decreases towards the cell periphery. Since identification of individual microtubules in the central cell area is significantly difficult and more often is impossible, there are several approaches to studying microtubules in the internal cell cytoplasm. These approaches are based on a decrease of microtubule density—both real, due to their partial depolymerization (by the action of cold temperatures or cytostatics), or apparent, due to a decrease of cell thickness (by photobleaching of preexisting microtubules and analysis of newly formed ones). In the present work, we propose a method based on the determination of optical density which allows evaluation of the state of the cytoplasmic microtubule system as a whole. The method consists of a comparison of the dependences describing changes of the microtubule optical density from the cell center to the periphery in controls and in experiments. Analysis of living cells by the proposed method has shown that the character of curves describing the decrease of optical density from the cell center to its periphery is different for various cell types; the dependence can be described both as an exponential regression (the CHO cell line) and as a linear regression (the NIH-3T3 and REF cell lines). Our previous studies have allowed the suggestion that the character of the dependence is determined by the ratio of free and centrosome-attached microtubules and by the position of their ends in the cell cytoplasm. To test this hypothesis, we considered model systems with all microtubules assumed to be in a straight orientation and divergent radially from the centrosome, but with different arrangements of plus-and minus-ends. In the model system, in which all the microtubule minus-ends are attached to the centrosome while the plus-ends are at different distances from it, the microtubule density is described by the exponential (f(x) = ae ^?bx ). Introduction of free microtubules into the system leads to a change of the character of this dependence, and the system in which the concentration of free microtubules with minus ends located at different distances from the cytoplasm is 5 times higher than that of the centrosome-attached microtubules is described by the linear regression equation (f(x) = k ^* x + b), which corresponds to the experimentally obtained dependences for 3T3 and REF cells. Thus, we believe that even in cells with a radial microtubule system, free microtubules may constitute the majority.     

Flexural Rigidity Measurements of Biopolymers Using Gliding Assays

Microtubules are cytoskeletal polymers which play a role in cell division, cell mechanics, and intracellular transport. Each of these functions requires microtubules that are stiff and straight enough to span a significant fraction of the cell diameter. As a result, the microtubule persistence length, a measure of stiffness, has been actively studied for the past two decades¹. Nonetheless, open questions remain: short microtubules are 10-50 times less stiff than long microtubules^2-4, and even long microtubules have measured persistence lengths which vary by an order of magnitude^5-9.Here, we present a method to measure microtubule persistence length. The method is based on a kinesin-driven microtubule gliding assay¹⁰. By combining sparse fluorescent labeling of individual microtubules with single particle tracking of individual fluorophores attached to the microtubule, the gliding trajectories of single microtubules are tracked with nanometer-level precision. The persistence length of the trajectories is the same as the persistence length of the microtubule under the conditions used¹¹. An automated tracking routine is used to create microtubule trajectories from fluorophores attached to individual microtubules, and the persistence length of this trajectory is calculated using routines written in IDL.This technique is rapidly implementable, and capable of measuring the persistence length of 100 microtubules in one day of experimentation. The method can be extended to measure persistence length under a variety of conditions, including persistence length as a function of length along microtubules. Moreover, the analysis routines used can be extended to myosin-based acting gliding assays, to measure the persistence length of actin filaments as well.     

Developmental Features of Cell Wall Formation in Sieve Elements of the Grass Aegilops comosa var. thessalica

In differentiating sieve elements of Aegilops comosa var. thessalicadictyosomes are abundant and they produce numerous smooth vesicles.Coated vesicles seem to bud from smooth ones. Since both kindsof vesicles appear both in the cytoplasm and in associationwith the plasmalemma, it is proposed that they move to and fusewith the plasmalemma transferring products for cell wall synthesis.During differentiation sub-plasmalemmal microtubules are initiallyscarce and randomly oriented but soon afterwards they becomenumerous and transversely oriented to the long axis. Cellulosemicrofibrils in the cell wall appear to run parallel to themicrotubules and the latter may regulate microfibril orientation. Root protophloem sieve elements develop wave-like wall thickenings,which are, during development, overlaid by microtubules perpendicularto the long axis. Just after maturation these thickenings progressivelybecome smooth and finally the walls appear uniform in thickness.The wave-like wall thickenings may function as stored wall material,utilized in later stages of development when wall material willbe needed and its synthesis will be impossible because of theabsence of a synthesizing mechanism in the highly degraded protoplastsof mature sieve elements. It is suggested that in this way thethickenings may enable root protophloem sieve elements to growand keep pace with the active clongation of the surroundingcells. Aegilops comosa var. thessalica, sieve elements. cell wall, microtubules, dictyosomes, coated vesicles, wave-like thickenings     

Nanomechanical model of microtubule translocation in the presence of electric fields

Research efforts in recent years have been directed toward actively controlling the direction of translocation of microtubules on a kinesin-coated glass surface with E-fields (electric fields), opening up the possibility of engineering controllable nanodevices that integrate microtubules and motor proteins into their function. Here, we present a detailed, biophysical model that quantitatively describes our observations on the steering of microtubules by electric fields. A sudden application of an electric field parallel to the surface and normal to the translocation direction of a microtubule bends the leading end toward the anode, because Coulombic (electrophoretic) forces are dominant on negatively charged microtubules. Modeling this bending as a cantilever deflection with uniform loading requires accurate mechanical and electrical properties of microtubules, including their charge density, viscous drag, and flexural rigidity. We determined the charge density of microtubules from measurements of the electrophoretic mobility in a “zero flow” capillary electrophoresis column and estimate it to be 256 e⁻ per micron of length. Viscous drag forces on deflecting microtubules in electroosmotic flows were studied theoretically and experimentally by directly characterizing flows using a caged dye imaging method. The flexural rigidity of microtubules was measured by applying E-fields to microtubules with biotinylated segments that were bound to streptavidin-coated surfaces. From the calculated loading, and the Bernoulli-Euler curvature and moment equation, we find that the flexural rigidity of microtubules depends on their length, suggesting microtubules are anisotropic. Finally, our model accurately predicts the biophysical properties and behavior of microtubules directed by E-fields, which opens new avenues for the design of biomolecular nanotransport systems.     

Cytoskeletal elements in cotton seed hair developmentin vitro: Their possible regulatory role in cell wall organization

Summary The localization and orientation of cytoskeletal elements in developing cotton fibres were studied by the indirect immunofluorescence and the dry cleaving technique. Microtubules are transversely arranged to the cell axis, most probably in a flat helix, in the cortex of expanding fibres. Since the innermost deposited cellulose microfibrils always show primarily the same orientation it is postulated that the microtubules control the transverse deposition of the cellulose fibrils. Little further cell expansion takes place during secondary wall formation and the microfibril pattern corresponds to that of the cortical microtubules,e.g., in the steepness of their helicoidal turns. Microtubules with a length of 7–20 m were observed, probably they are longer. The importance of microtubule length on microfibril deposition is discussed. The density of microtubule packing is in the range of 8–14 m^-1 as in other comparable cell types. In contrast to the microtubules, actin filaments are most likely longitudinally oriented during different phases of fibre development. The dry cleaving technique reveals numerous coated pits in the plasma membrane which are not crossed by microtubules. They seem to be linked to the latter by filamentous structures.     

Resolving the molecular structure of microtubules under physiological conditions with scanning force microscopy

We have imaged microtubules, essential structural elements of the cytoskeleton in eukaryotic cells, in physiological conditions by scanning force microscopy. We have achieved molecular resolution without the use of cross-linking and chemical fixation methods. With tip forces below 0.3 nN, protofilaments with ~6 nm separation could be clearly distinguished. Lattice defects in the microtubule wall were directly visible, including point defects and protofilament separations. Higher tip forces destroyed the top half of the microtubules, revealing the inner surface of the substrate-attached protofilaments. Monomers could be resolved on these inner surfaces.Abbreviations APTS (3-aminopropyl)triethoxysilane - DETA N¹-[3-(trimethoxysilyl)propyl]diethylenetriamine - EM electron microscopy - MT microtubule - SFM scanning force microscopy     

Effects of four agents that modify microtubules and microfilaments (vinblastine,colchicine, lidocaine,and cytochalasin B) on macrophage-mediated cytotoxicity to tumor cells

Summary The effects of vinblastine, colchicine, lidocaine, and cytochalasin B on tumor cell killing by BCG-activated macrophages were examined. These four drugs were selected for their action on membrane-associated cytoskeletal components, microtubules, and microfilaments. Colchicine and vinblastine, which block microtubular synthesis, inhibit macrophage-mediated tumor-cell cytotoxicity at a concentration of 10^–6 M. Cytochalasin B, which disrupts microfilaments, enhances tumor cell lysis and stasis due to activated macrophages at a concentration of 10^–7 M. Lidocaine, which may induce the disappearance of both microtubules and microfilaments, has the same inhibiting effect as vinblastine at a concentration of 5×10^–7 M. Whereas vinblastine and lidocaine seem to act on the macrophage itself, cytochalasin B exerts its effect predominantly on the tumor cell. These results suggest that microtubules and microfilaments play a role in the destruction of tumor cells by activated macrophages.     

Characterization of the role of calcium in regulating the microtubule-destabilizing activity of MDP25

Regulation of cell elongation is important for plant morphogenesis. Many studies have shown that cortical microtubules play crucial roles during cell elongation and that microtubule stability, organization, and dynamics are regulated by microtubule regulatory proteins.¹ Recently, we reported that a novel protein from Arabidopsis, termed microtubule-destabilizing protein 25 (MDP25), functions as a negative regulator of hypocotyl cell elongation. MDP25 destabilizes microtubules and exerts its effect on microtubules as a result of transient elevation of cytosolic calcium levels.²     

STRUCTURE AND PHYSIOLOGY OF THE HAPTONEMA IN CHRYSOCHROMULINA (PRYMNESIOPHYCEAE). II. MECHANISMS OF HAPTONEMATAL COILING AND THE REGENERATION PROCESS1

The axoneme in the free part of the haptonema in Chrysochromulina acantha Leadbeater & Manton and C. simplex Estep et al. consists of seven single microtubules, except in the extreme distal swelling where, in C. simplex, there are only three microtubules. In the extended haptonema, the microtubules are arranged in a ring though they are not evenly spaced, the gap between two of the microtubules being larger than that between any other neighboring pairs. In the coiled haptonema, rearrangement of the microtubules occurs so that the ring becomes distorted and the microtubules form two superposed arcs. A sliding microtubule mechanism is considered as a means by which haptonematal movement might be affected, and this is discussed in relation to the fine structure of both embedded material and negatively stained demembranated cells. We show that haptonematal coiling is dependent on the presence of calcium ions and that an external concentration of between 10^?6 and 10^?7 M Ca²⁺ is the threshold below which the frequency of coiling on cell death is reduced. The results of experiments using ethylene bis-(oxyethylenenitrilo)-tetracetic acid (EGTA) and lanthanum ions to control extracellular and intracellular Ca²⁺ concentrations are discussed in terms of both external free calcium and intracellular pools. We also show that haptonematal regeneration following excision begins with a short lag phase. This is followed by a period of rapid growth, decreasing after approximately 4 h. Full haptonematal regrowth is not achieved until after 12–15 h. The rate of haptonematal regeneration is strongly affected when the flagella are regenerating simultaneously. These observations are interpreted in terms of competition for intracellular precursors.     

Colchicine-binding Proteins in Chromatin and Membranes

THE cytoplasm of several cell types contains a protein which is characterized by its specific capability to bind colchicine^1–4 and which may be in dynamic equilibria between monomers and a distinct form of polymer structure, the microtubules. Studies of the character of this protein have hitherto usually proceeded from the cellular homogenate to the 100,000g supernatant which, at least in brain tissue, provides the largest enrichment and recovery. Two lines of observations prompted us to examine the possibility that colchicine-binding proteins exist in association with structures other than microtubules. First, considerable amounts of colchicine-binding protein are recovered in the 100,000g sediments. This is especially noticeable with mammalian liver but has also been noted during vertebrate brain fractionation^4–7. Second, certain structures exhibit frequent and conspicuous associations with microtubules, in particular membranes^8,9 and chromosomal structures. Membrane preparations too have been reported to share some protein properties in common with tubulin^10,11.     

Micronuclear division and microtubular stability in the ciliate Colpoda steinii

The first microtubules which appear in the prophase micronucleus of Colpoda steinii are located beneath the nuclear envelope and not connected to the chromosomes. Most microtubules of the metaphase spindle are connected to the tapered tips of the micronucleus and terminate singly at the chromosomes surrounded by a conical, RNA-containing kinetochore which disappears upon cold treatment. During anaphase, an interzonal stembody is formed which is maximally stretched at telophase before the daughter micronuclei are pinched off from its ends. The macronucleus, which also stretches parallel to the micronuclear stembody, has fewer microtubules which insert at the inner nuclear envelope but are not attached to the chromatin. Based upon the effects of depolymerizing factors different classes of microtubules can be distinguished. Kinetochore microtubules are sensitive to cold and vinblastine (VLB). In 2.5×10^–5 M VLB their number is drastically reduced and the interzonal microtubules of early anaphase, which are also highly sensitive to nocodazole, become completely disassembled. The cross-bridged microtubules of the fully formed stembody of late anaphase display the highest resistance to depolymerization. They show signs of partial disassembly only after prolonged cold exposure and withstand higher concentrations of VLB or nocodazole than other micronuclear microtubules. Microtubules in the elongating macronucleus are fairly insensitive to cold but are depolymerized by 5×10^–5 M VLB while 1.66×10^–5 M nocodazole, which leaves only traces of stembody microtubules, merely reduces their number and length. All microtubules are fairly resistant to colchicine since high concentrations (5×10^–2 M) are required to prevent assembly while fully formed stembodies are unaffected. Macronuclear microtubules are depolymerized at this concentration. Nocodazole, which depolymerizes all premetaphase microtubules at 6.6×10^–6 M, leads to multipolar metaphase spindles with numerous microtubules, even at 1.66×10^–5 M, an effect ascribed to the activity of the nuclear envelope as a microtubule organizing centre. At twice this concentration multipolar spindles are no longer found and the remaining microtubules show no apparent order. A stabilizing influence of the micronuclear envelope is indicated by the fact that whenever remnants of microtubules are found after depolymerizing treatments, they are located in its vicinity.     

Studies on the fine structure of teleost blood cells

Summary Electron microscopic study of nucleated erythrocytes of the goldfish, Carassius auratus, reveals the microtubular elements comprising the marginal band which encircles the cell. Six to ten units are visible at each pole of the cell, immediately within the plasmalemma. Each tubular unit is composed of an electron dense membrane enclosing a less dense core. Cross-sectional units average 264 Å outer diameter, whereas tubules measured in longitudinal sections average 237 Å.The functions of the microtubules of the marginal bands are analyzed in view of Meves' original interpretation of maintenance of the discoidal form of the nucleated erythrocyte, and the more recent investigations in cell physiology of Trotter and Tilney. It is proposed that the microtubules possess a dual function: the support of the cell which is attributed to the hydroelastic properties of the turgid microtubules resulting from intratubular hydrostatic pressures; and the intracellular transport of materials via the intratubular fluid. The microtubules may, therefore, be considered as a skeletal system and part of an intracellular circulatory system.This project was supported by grants 2 G-895 and 2 G-505 from the United States Public Health Service.     

Axoplasmic transport in the crayfish nerve cord. The role of fibrillar constituents of neurons

(a) Axoplasmic transport of tritium-labeled proteins in crayfish nerve cord was confirmed at a slow rate of 1 mm/day. A second proteinaceous component which moves at a rate of 10 mm/day was also detected. Radioautography and biochemical analysis indicate that proteins migrating at these velocities have a perikaryal origin and move caudad within axons as sharply defined peaks. (b) Evidence is presented for the blockage of the slow and the fast movement of proteins by intraganglionic injection of the anti-mitotic agent vinblastine sulfate (0.1 mM). (c) Electron microscope observations of vinblastine-treated ganglia revealed a reduction in the number of axonal microtubules and the formation of intracellular aggregates presumably composed of microtubular protein. (d) These findings would be compatible with the involvement of microtubules in both slow and fast axoplasmic transport. However, the block induced by vinblastine was detected in regions of the cord (up to 10 mm away from the injection site) where the number and morphology of microtubules appeared unaltered. In addition, axons showing effects of vinblastine occasionally contained mitochondria with remarkably dense and thickened membranes. (e) In association with the surfaces of axonal microtubules are lateral filamentous elements (40–80 A in diameter) which also showed vinblastine-induced alterations. Our observations indicate that such filiform structures, associated with microtubules, may be a necessary component in the transport mechanism(s).     

Microtubule-driven nuclear movements and linear elements as meiosis-specific characteristics of the fission yeasts Schizosaccharomyces versatilis and Schizosaccharomyces pombe

Meiotic prophase in Schizosaccharomyces pombe is characterized by striking nuclear movements and the formation of linear elements along chromosomes instead of tripartite synaptonemal complexes. We analysed the organization of nuclei and microtubules in cells of fission yeasts undergoing sexual differentiation. S. japonicus var. versatilis and S. pombe cells were studied in parallel, taking advantage of the better cytology in S. versatilis. During conjugation, microtubules were directed towards the mating projection. These microtubules seem to lead the haploid nuclei together in the zygote by interaction with the spindle pole bodies at the nuclear periphery. After karyogamy, arrays of microtubules emanating from the spindle pole body of the diploid nucleus extended to both cell poles. The same differentiated microtubule configuration was elaborated upon induction of azygotic meiosis in S. pombe. The cyclic movements of the elongated nuclei between the cell poles is reflected by a dynamic and coordinated shortening and lengthening of the two microtubule arrays. When the nucleus was at a cell end, one array was short while the other bridged the whole cell length. Experiments with inhibitors showed that microtubules are required for karyogamy and for the elongated shape and movement of nuclei during meiotic prophase. In both fission yeasts the SPBs and nucleoli are at the leading ends of the moving nuclei. Astral and cytoplasmic microtubules were also prominent during meiotic divisions and sporulation. We further show that in S. versatilis the linear elements formed during meiotic prophase are similar to those in S. pombe. Tripartite synaptonemal complexes were never detected. Taken together, these findings suggest that S. pombe and S. versatilis share basic characteristics in the organization of microtubules and the structure and behaviour of nuclei during their meiotic cell cycle. The prominent differentiations of microtubules and nuclei may be involved in the pairing, recombination, and segregation of meiotic chromosomes.     

Xylogenesis in tissue culture: Taxol effects on microtubule reorientation and lateral association in differentiating cells

Summary InZinnia elegans tissue cultures, cortical microtubules reorient from longitudinal to transverse arrays as the culture age increases and before differentiation of tracheary elements is visible. The orientation of microtubules, in the period just before visible differentiation, determines the direction of the secondary wall bands in forming tracheary elements. Taxol, applied early in culture, stabilizes the microtubules of most cells in the longitudinal direction. Tracheary elements differentiating in these taxol treated cultures show secondary wall bands parallel to the long axis of the cell while those differentiating in control cultures always have wall bands transverse to the long axis of the cell.It is proposed that, in untreatedZinnia cultures, microtubules are reoriented by a gradual shift from longitudinal to transverse and this reorientation normally occurs before differentiation becomes visible. Once initiated, tracheary element differentiation involves lateral association of microtubules to form the discrete bands typical of secondary wall patterns.     

Quantitative analysis of the microtubule system in isolated fish melanophores

Isolated melanophores of the angelfish, Pterophyllum scalare, have been used in a morphometric analysis and a quantitative study of their microtubule system. Using transverse sections spaced at regular intervals, the changes associated with the process of pigment aggregation have been determined. Upon the concentration of pigment granules in the central cell region, almost half of the cytoplasmic portion is also withdrawn from the peripheral cell regions. Counts of microtubules within a cell sector in cells with pigment aggregated and dispersed, respectively, reveal (a) a constancy of the number of microtubules in this sector regardless of the distance from the cell center, and (b) a reduction of microtubule number in cells with pigment aggregated by about 58%. On the basis of these counts, the total number of microtubules has been calculated. In the dispersed state, about 2,400 microtubules extend between the center and the periphery of the cell, while their number is about 1,000 in the aggregated state. Using a 13-protofilament model of a microtubule and relevant data on size and molecular weight of microtubule subunits, the amount of tubulin present as microtubules is calculated. In the average, the cells contain 1.95·10⁸ monomers corresponding to 1.78·10^?8 mg tubulin. A tentative estimation of the concentration of tubulin inside a melanophore yields values of 6.1 mg/ml for the whole cell and 16.5 mg/ml for the cytoplasm alone (excluding membrane-bound organelles). Based on this estimation, a comparison, with microtubule assembly in vitro is made.     

The presence of extended phragmosomes containing cytoskeletal elements in fusiform cambial cells ofFraxinus excelsior L.

Summary Fusiform cambial cells of the ash (Fraxinus excelsior L.), which are strongly elongated and vacuolated, contain a phragmosome which traverses the whole length of the cells during preprophase and karyokinesis and which remains present during cytokinesis until it is integrated in cell plate with adjacent cytoplasm.The phragmosome consists of a thin perforated cytoplasmic layer located in the plane of the future cell plate. Otherwise oriented transvacuolar cytoplasmic layers or strands are not present in these cells.The phragmosome contains cytoskeletal elements, namely microtubules and also microfilament bundles both of which are oriented mainly in longitudinal direction.The phragmosomal microtubules are a new category of microtubules associated with cell division; presumably they guide the centrifugally growing cell plate to the parental cell wall site previously marked by the preprophase band of microtubules.     

The effect of ruthenium red on the assembly and disassembly of microtubules and on rapid axonal transport

The assembly of microtubules was found to decrease in proportion to the amount of added ruthenium red, indicating a high affinity of ruthenium red for the microtubule system. An equimolar amount of ruthenium red per tubulin dimer inhibited the microtubule assembly completely and disassembled existing microtubules. Binding of ruthenium red to tubulin is accompanied by a shift in the absorption maximum from 535 to 538 nm. The binding is very strong, as shown by the finding that ruthenium red could not be displaced from tubulin by gel chromatography on Sephadex, or by the addition of Ca²⁺ or Mg²⁺. The binding of ruthenium red to tubulin did not affect the single colchicine site, nor the Mg²⁺ site(s), as shown by use of Mn²⁺ as an EPR probe. Ruthenium red also interfered with microtubules in an intact cell system, as it inhibited rapid axonal transport in the frog sciatic nerve, measured by the accumulation of [³H]leucine-labelled proteins in front of a ligature.     

A Comparative electron microscopic study of cytoplasmic microtubules and axial unit tubules in a spermatozoon and a protozoan

Cytoplasmic microtubules and axial unit tubules were studied in both sectioned and negatively-stained material. Walls of microtubules of frog lung-fluke (Haematoloechus medioplexus) spermatozoa have a helical substructure, while those of the flagellate, Trypanosoma lewisi, are composed of ten longitudinally-oriented filaments. Cross-bridges occur between some filaments of trypanosome microtubules. Doublet tubules of axial units in both cell types are structurally similar to the trypanosome microtubules, which may indicate similarity of function. Microtubules of fluke spermatozoa appear to be somewhat rigid, are resistant to sonication, and are considered to be mainly supportive. Circular profiles of wall subunits are seen in transverse sections of microtubules of both cell types and in doublet tubules of the trypanosome. Comparisons are made between sectioned and negatively-stained material; while negative-staining better reveals the fundamental substructure of microtubular elements, some distortion appears to occur. In connection with this research, a brief preliminary article demonstrated the presence of subunits in the walls of cytoplasmic microtubules of fluke spermatozoa (Burton, '66). Also, it was shown that the wall of these tubular elements possesses a helical structure, and a diagrammatic representation of the wall structure was set forth.     

THE CONTRACTILE PROCESS IN THE CILIATE, STENTOR COERULEUS : I. The Role of Microtubules and Filaments

The structural basis for the function of microtubules and filaments in cell body contractility in the ciliate Stentor coeruleus was investigated. Cells in the extended state were obtained for ultrastructural analysis by treatment before fixation with a solution containing 10 mM EGTA, 50–80 mM Tris, 3 mM MgSO₄, 7.5 mM NH₄Cl, 10 mM phosphate buffer (pH 7.1). The response of Stentor to changes in the divalent cation concentrations in this solution suggests that Ca⁺² and Mg⁺² are physiologically important in the regulation of ciliate contractility. The generation of motive force for changes in cell length in Stentor resides in two distinct longitudinal cortical fiber systems, the km fibers and myonemes. Cyclic changes in cell length are associated with (a) the relative sliding of parallel, overlapping microtubule ribbons in the km fibers, and (b) a distinct alteration in the structure of the contractile filaments constituting the myonemes. The microtubule and filament systems are distinguished functionally as antagonistic contractile elements. The development of motive force for cell extension is accomplished by active microtubule-to-microtubule sliding generated by specific intertubule bridges. Evidence is presented which suggests that active shortening of contractile filaments, reflected in a reversible structural transformation of dense 4-nm filaments to tubular 10–12-nm filaments, provides the basis for rapid cell contraction.