Mapping of IS6110 flanking regions in clinical isolates of Mycobacterium tuberculosis demonstrates genome plasticity

Southern hybridization was used in combination with IS6110 insertion-locus-specific probes in a comparative study to determine the structure of chromosomal domains flanking IS6110 elements in clinical isolates of Mycobacterium tuberculosis. The resulting restriction fragment length polymorphism (RFLP) data demonstrated three mutational mechanisms responsible for the polymorphisms observed: IS6110 insertion, chromosomal mutation and deletion. The frequency of IS6110 insertion within many of the chromosomal regions demonstrates that preferential integration regions are common in M. tuberculosis. Mapping the IS6110 insertion positions and chromosomal deletions in relation to the M. tuberculosis H37Rv and M. bovis BCG genome sequences reveals numerous disruptions of predicted open reading frames (ORFs). A phylogenetic tree, based on the mutational data, showed a number of independently evolving lineages of M. tuberculosis, while analysis of the mutational events occurring at each branch point suggests both divergent and convergent evolution. A significant positive correlation was demonstrated between the mutation rate and the frequency of occurrence of different isolates in families of strains, suggesting that evolution may impact on strain 'fitness' or that strain proliferation may increase the chance of mutation. We conclude that the genome of clinical isolates of M. tuberculosis continues to evolve.     

Analysis of sequence diversity among IS6110 sequence of Mycobacterium tuberculosis: possible implications for PCR based detection

The IS6110 belongs to the family of insertion sequences (IS) of the IS3 category. This insertion sequence was reported to be specific for Mycobacterium tuberculosis complex and hence is extensively exploited for laboratory detection of the agent of tuberculosis and for epidemiological investigations based on polymerase chain reaction. IS6110 is 1361-bp long and within this sequence different regions have been utilized as targets in the identification of M. tuberculosis by PCR. However, the results are not always consistent, specific and sensitive. In recent years, a few clinical investigations raised concerns over IS6110 specificity and sensitivity in the diagnosis of tuberculosis due to false-positive (homology with other target DNA besides M. tuberculosis) or false negative (due to absence of copies of IS6110) results with IS6110 specific primers. To unravel the variations in IS6110 sequences, an insilico analysis of IS6110 sequence of different strains of M. tuberculosis was carried out. Our results of comparative analysis of IS6110 insertion sequences of M. tuberculosis complex suggests that, IS6110 insertion sequences harbored variations in its sequence, which is evident from the phylogenetic analysis. Importantly, IS6110 sequence has divergence within the copies of same strain and formed different clusters. A list of IS6110 specific primers used in various clinical investigation of tuberculosis was obtained from the literature and their performance scrutinized. Our study emphasizes the need to develop PCR assays (multiplex format) targeting more than one region of the genome of M. tuberculosis.     

IS6110 fingerprinting of sensitive and resistant strains (1991-1992) of Mycobacterium tuberculosis in Colombia

The standardized method to study the polymorphism of IS 6110 was used to characterize 53 isolates of Mycobacterium tuberculosis obtained during 1991-1992 from 14 regions in Colombia. In Valle region cluster rate was 25% (4/16). The mean number of IS6110 band was 10 +/- 3. Similarity between strains was of 60% in 81% of strains and this tended to be correlated with geographic origin. For the first time M. tuberculosis without IS6110 bands in restriction fragment length polymorphism analysis was found in Colombia. Additional studies are necessaries in order to best characterize the situation in relation to human immunodeficiency virus epidemic and recent changes in tuberculosis control program.     

Molecular evidence for independent occurrence of IS6110 insertions at the same sites of the genome of Mycobacterium tuberculosis in different clinical isolates

Several characteristics of Mycobacterium tuberculosis (e.g., conserved genome and low growth rate) have severely restricted the study of the microorganism. The discovery of IS6110 raised hopes of overcoming these obstacles. However, our knowledge of this IS element is relatively limited; even its two basic characteristics (transposition mechanism and target site selection) are far from well understood. In this study, IS6110 insertions in ipl loci (iplA and iplB) in two collections of clinical isolates of M. tuberculosis from different geographic locations, one from Scotland and the other from Thailand, were investigated. Five different IS6110 insertions in the loci were identified: ipl-4::IS6110, ipl-5::IS6110, ipl-11::IS6110, ipl-12::IS6110, and ipl-13::IS6110. An attempt to establish the phylogenetic relationship of the isolates containing these insertions was unsuccessful, suggesting that some of these insertions may have arisen from more than one event. This possibility is further supported by the observation that IS6110 copies existed in the same site but with different orientations in different isolates, and the insertion site of ipl-1::IS6110 harbored IS6110 copies in both iplA and iplB in different strains. All these suggest the independent occurrence of IS6110 insertions at the same sites of the genome of M. tuberculosis in different clinical isolates. The implications of this finding are discussed.     

A genomic library-based amplification approach (GL-PCR) for the mapping of multiple IS6110 insertion sites and strain differentiation of Mycobacterium tuberculosis

Evidence suggests that insertion of the IS6110 element is not without consequence to the biology of Mycobacterium tuberculosis complex strains. Thus, mapping of multiple IS6110 insertion sites in the genome of biomedically relevant clinical isolates would result in a better understanding of the role of this mobile element, particularly with regard to transmission, adaptability and virulence. In the present paper, we describe a versatile strategy, referred to as GL-PCR, that amplifies IS6110-flanking sequences based on the construction of a genomic library. M. tuberculosis chromosomal DNA is fully digested with HincII and then ligated into a plasmid vector between T7 and T3 promoter sequences. The ligation reaction product is transformed into Escherichia coli and selective PCR amplification targeting both 5' and 3' IS6110-flanking sequences are performed on the plasmid library DNA. For this purpose, four separate PCR reactions are performed, each combining an outward primer specific for one IS6110 end with either T7 or T3 primer. Determination of the nucleotide sequence of the PCR products generated from a single ligation reaction allowed mapping of 21 out of the 24 IS6110 copies of two 12 banded M. tuberculosis strains, yielding an overall sensitivity of 87,5%. Furthermore, by simply comparing the migration pattern of GL-PCR-generated products, the strategy proved to be as valuable as IS6110 RFLP for molecular typing of M. tuberculosis complex strains. Importantly, GL-PCR was able to discriminate between strains differing by a single IS6110 band.     

The control of copy number of IS6110 in Mycobacterium tuberculosis

Insertion sequence (IS) elements are bacterial genes that are able to transpose to different locations in the genome. These elements are often used in molecular epidemiology as genetic markers that track the spread of pathogens. Transposable elements have frequently been described as "selfish DNA" because they facilitate their own transposition, causing damage when they insert into coding regions, while contributing little if anything to the bacterial host. According to this hypothesis, the expansion of copy number of insertion sequences is opposed by negative selection against high copy numbers. From an alternative point of view, we might expect IS elements to intrinsically regulate transposition within cells, thereby limiting damage to their bacterial host. Here, we report evidence that the copy number of IS6110 in Mycobacterium tuberculosis is controlled by selection against the element. We first construct 12 different models of marker change resulting from a combination of possible transposition functions and selective regimes. We then compute the Akaike Information Criterion for each model to identify the models that best explain data consisting of serial isolates of M. tuberculosis genotyped with IS6110. We find that the best performing models all include selection against the accumulation of copies. Specifically, our analysis points to the interaction of separate copies of the element causing lethal effects. We discuss the implications of these findings for genome evolution and molecular epidemiology.     

Differentiation of the Mycobacterium tuberculosis W-Beijing family strains from the Russian Federation by the VNTR-typing

Recent phylogenetic studies allowed the Mycobacterium tuberculosis complex to be divided into a number of the strain families. The W-Beijing family is one of most widespread M. tuberculosis variants frequently causing epidemic outbreaks. This family is genetically homogenous and conserved so that ETR A, B, C, D, E - typing is insufficient for the W-Beijing differentiation. All W-Beijing isolates have common profile (42435). This led to the false clustering in the molecular epidemiology study, especially in the region of predominance of the W-Beijing family. In this investigation we searched for the VNTR loci with high evolution rate, which were polymorphic in the W-Beijing genome. Eleven VNTR-loci were assayed in the DNA panel of 99 M. tuberculosis isolates from the tuberculosis patients in North-West and West-Siberian regions of Russia during the period from 2000 to 2001. Ninety nine strains of M. tuberculosis were divided into 74 VNTR-types, 51 isolates of the W-Beijing family were subdivided into 30 VNTR-types. The Hunter-Gudson index (HGDI) for all studied loci (ETR-A, ETR-C, ETR-E, V, V2, V3, V4, V5, V6, V10, V11) was close to one of the IS6110 RFLP indices being "the gold standard" of the M. tuberculosis complex genotyping. The V2, V3 loci located in the sequences of the PPE gene family, were highly polymorphic and more discriminative then others (HGDI is about 0.8). The congruence between the IS6110 RFLP-typing and 11 loci VNTR-typing was measured during genotyping for 23 isolates of the W-Beijing family. The isolates were divided into 9 genotypes by the IS6110 RFLP and into 13 variants by the VNTR-typing. The profiles correlation coefficient was 0.767689 that reflected the differences in the rate and type of the given genome target evolution.     

Mutations in the CCGTTCACA DnaA box of Mycobacterium tuberculosis oriC that abolish replication of oriC plasmids are tolerated on the chromosome

The origin of replication (oriC) region in some clinical strains of Mycobacterium tuberculosis is a hot spot for IS6110 elements. To understand how clinical strains with insertions in oriC can replicate their DNA, we characterized the oriC regions of some clinical strains. Using a plasmid-based oriC-dependent replication assay, we showed that IS6110 insertions that disrupted the DnaA box sequence CCGTTCACA abolished oriC activity in M. tuberculosis. Furthermore, by using a surface plasmon resonance technique we showed that purified M. tuberculosis DnaA protein binds native but not mutant DnaA box sequence, suggesting that stable interactions of the DnaA protein with the CCGTTCACA DnaA box are crucial for replication of oriC plasmids in vivo. Replacement by homologous recombination of the CCGTTCACA DnaA box sequence of the laboratory strain M. tuberculosis H37Ra with a mutant sequence did not result in nonviability. Together, these results suggest that M. tuberculosis strains have evolved mechanisms to tolerate mutations in the oriC region and that functional requirements for M. tuberculosis oriC replication are different for chromosomes and plasmids.     

Whole genome shotgun sequencing of one Colombian clinical isolate of Mycobacterium tuberculosis reveals DosR regulon gene deletions

Several genomes of different Mycobacterium tuberculosis isolates have been completely sequenced around the world. The genomic information obtained have shown higher diversity than originally thought and specific adaptations to different human populations. Within this work, we sequenced the genome of one Colombian M.?tuberculosis virulent isolate. Genomic comparison against the reference genome of H37Rv and other strains showed multiple deletion and insertions that ranged between a few bases to thousands. Excluding PPE and PG-PGRS genes, 430 proteins present changes in at least 1 amino acid. Also, novel positions of the IS6110 mobile element were identified. This isolate is also characterized by a large genomic deletion of 3.6?kb, leading to the loss and modification of the dosR regulon genes, Rv1996 and Rv1997. To our knowledge, this is the first report of the genome sequence of a Latin American M.?tuberculosis clinical isolate.     

Use of the insertion element IS6110 for DNA fingerprinting of Mycobacterium tuberculosis isolates presenting various profiles of drug susceptibility

Abstract IS 6100 is an insertion sequence of the IS3 family and it is present in multiple copies in the chromosome of Mycobacterium tuberculosis . Four to 15 copies are present in various strains of M. tuberculosis . In this study, the value of IS 6110 as an epidemiological marker of tuberculosis was examined. Unrelated clinical strains from Greek patients presented, in restriction fragment length polymorphism analysis, a high degree of polymorphism, whereas patterns of related clinical strains from familial outbreaks were identical. Since RFLP analysis with acetylaminofluorene labeled IS 6110 as the probe gave satisfactory results, it is suggested that this non-radioactive probe can be used in hospitals and health centres for the epidemiological survey of M. tuberculosis infections.     

Usefulness of ligation-mediated PCR genotyping in tracking outbreak-associated Mycobacterium tuberculosis strains

With the emergence of a multidrug resistant tuberculosis (MDR-TB) outbreak, the availability of a rapid typing method to carry out a nationwide prospective survey for the tracking of newly emerging MDR-TB foci became a priority. For this purpose, we have applied the IS6110 PCR-based genotyping assay, namely, LM-PCR (ligation-mediated PCR). The latter relies on ligation of a synthetic oligonucleotide priming site to a restriction site flanking IS6110. Sequences between the IS element and the restriction site are then amplified using an IS6110 specific outward primer and an oligonucleotide specific to the ligated priming site. Although it was found slightly less discriminative than the standard IS6110 restriction fragment length polymorphism analysis (IS6110 RFLP), LM-PCR allowed for the rapid and prospective identification of new outbreak-related cases within a large pool of circulating M. tuberculosis isolates. In comparison to IS6110 RFLP LM-PCR was found simple enough to justify its implementation in laboratories involved in MDR-TB surveillance at a nationwide scale.     

结核分枝杆菌中插入序列的研究

用人型复合分枝杆菌的特异插入序列IS6110和IS1081制 备探针,对5种限制性内切酶消化的结核分枝杆菌DNA进行杂交。结果表明,经PvuⅡ酶消化 的结核分枝杆菌DNA,用IS6110制备的探针进行杂交呈现高度多态性,说明IS6110对于人型 复合分枝杆菌分型研究和结核病流行病学研究具有很大价值。用IS6110制备的317bp探针对4 6株人结核分枝杆菌分离株多态性分析研究证实,这些菌株呈现高度DNA多态性,而且所含拷 贝数也极为不同,一般含7～18个拷贝。     

Stimulation of transposition of the Mycobacterium tuberculosis insertion sequence IS6110 by exposure to a microaerobic environment

The Mycobacterium tuberculosis-specific insertion sequence IS6110/986 has been widely used as a probe because of the multiple polymorphism observed among different strains. To investigate transposition of IS6110, a series of artificially constructed composite transposons containing IS6110 and a kanamycin resistance marker were constructed. The composite transposons were inserted into a conditionally replicating, thermosensitive, Escherichia coli-mycobacterial shuttle vector and introduced into M. smegmatis mc2155. Lawns of transformants were grown at the permissive temperature on kanamycin-supplemented agar and subsequently prevented from further growth by shifting to the non-permissive temperature. Under normal atmospheric conditions, kanamycin-resistant papillae appeared after only about 5-6 weeks of incubation. However, these events were not associated with transposon mobilization. In contrast, lawns that were exposed to a 48 h microaerobic shock generated kanamycin-resistant papillae after only 6-14 days. These events were generated by conservative transposition of the IS6110 composite transposon into the M. smegmatis chromosome, with loss of the shuttle vector. In common with other IS3 family elements, transposition of IS6110 is thought to be controlled by translational frameshifting. However, we were unable to detect any significant frameshifting within the putative frameshifting site of IS6110, and the level of frameshifting was not affected by microaerobic incubation. The finding that transposition of IS6110 is stimulated by incubation at reduced oxygen tensions may be relevant to transposition of IS6110 in M. tuberculosis harboured within TB lesions.     

IS6110 restriction fragment length polymorphism typing of Mycobacterium tuberculosis isolates from East Azerbaijan Province of Iran

To investigate the genetic variation among Mycobacterium tuberculosis isolates in the East Azerbaijan Province of Iran and to evaluate the level of and risk factors for recent transmission of tuberculosis (TB), we performed IS6110-based restriction fragment length polymorphism analysis of strains, isolated from 105 patients during the period of September 2002 to March 2003 in TB centers and university hospitals of the province. Among 105 isolates, 81 different IS6110 patterns were found, of which 70 were observed only once and 11 were shared by two to eight isolates. Ninety-six isolates (91.4%) were found to have more than five copies of IS6110 and together with high patterns polymorphism, shows that IS6110-RFLP typing could be useful for studying the epidemiology of TB in Azerbaijan. The minimum estimated rate of recent transmission was 23%, suggesting that the degree of recent transmission in East Azerbaijan Province is relatively low. Clustering was not associated with age, sex or site of infection of TB but drug-resistant isolates were less likely to be clustered than sensitive isolates (p < 0.05).     

Evolutionary relationships among strains of Mycobacterium tuberculosis with few copies of IS6110

Molecular typing of Mycobacterium tuberculosis by using IS6110 shows low discrimination when there are fewer than five copies of the insertion sequence. Using a collection of such isolates from a study of the epidemiology of tuberculosis in London, we have shown a substantial degree of congruence between IS6110 patterns and both spoligotype and PGRS type. This indicates that the IS6110 types mainly represent distinct families of strains rather than arising through the convergent insertion of IS6110 into favored positions. This is supported by identification of the genomic sites of the insertion of IS6110 in these strains. The combined data enable identification of the putative evolutionary relationships of these strains, comprising three lineages broadly associated with patients born in South Asia (India and Pakistan), Africa, and Europe, respectively. These lineages appear to be quite distinct from M. tuberculosis isolates with multiple copies of IS6110.     

An appraisal of PCR-based technology in the detection of Mycobacterium tuberculosis

Tuberculosis is an under-recognized yet catastrophic health problem, particularly in developing countries. The HIV pandemic has served to increase the number of susceptible individuals, and multidrug-resistance and poor socioeconomic conditions also augment the prevalence and the consequences of the disease. To control the disease and its spread, it is vital that tuberculosis diagnostics are accurate and rapid. Whereas microscopy and culture have several limitations (low sensitivity is a problem for the former, while the latter has a delayed turnaround time), PCR-based techniques targeting regions of the Mycobacterium tuberculosis genome such as IS6110 have proved to be useful. The purpose of this review is to assess the use of PCR-RFLP, nested PCR and real-time PCR protocols and the choice of target regions for the detection of M. tuberculosis. Real-time PCR for the detection of M. tuberculosis target genes in clinical specimens has contributed to improving diagnosis and epidemiologic surveillance in the past decade. However, targeting one genome sequence such as IS6110 may not by itself be sufficiently sensitive to reach 100% diagnosis, especially in the case of pulmonary tuberculosis. Additional testing for target genome sequences such as hsp65 seems encouraging. An interesting approach would be a multiplex real-time PCR targeting both IS6110 and hsp65 to achieve comprehensive and specific molecular diagnosis. This technology needs development and adequate field testing before it becomes the acceptable gold standard for diagnosis.     

Transmission of tuberculosis in Havana, Cuba: a molecular epidemiological study by IS6110 restriction fragment length polymorphism typing

The combination of molecular and conventional epidemiological methods has improved the knowledge about the transmission of tuberculosis in urban populations. To examine transmission of tuberculosis in Havana, Cuba, with DNA fingerprinting, we studied 51 out of 92 Mycobacterium tuberculosis strains isolated from tuberculosis patients who resided in Havana and whose infection was culture-confirmed in the period from September 1997 to March 1998. Isolates from 28 patients (55%) had unique IS6110 restriction fragment length polymorphism (RFLP) patterns, while isolates from 23 others (45%) had identical patterns and belonged to 7 clusters. Three clusters consisting of six, five and two cases were each related to small outbreaks that occurred in a closed setting. Three other clustered cases were linked to a large outbreak that occurred in another institution. Younger patients were more correlated to clustering than older ones. The finding that 45% of the isolates had clustered RFLP patterns suggests that recent transmission is a key factor in the tuberculosis cases in Havana. The IS6110 RFLP typing made it possible to define the occurrence of outbreaks in two closed institutions.     

Nature of DNA polymorphism in the direct repeat cluster of Mycobacterium tuberculosis; application for strain differentiation by a novel typing method

Mycobacterium tuberculosis complex strains contain a unique chromosomal region, which consists of multiple 36bp direct repeats (DRs), which are interspersed by unique spacers 35 to 41 bp in length. In this study we investigated the nature of the DNA polymorphism of this DR cluster by sequencing part of this region in a large number of M. tuberculosis complex strains. Two types of genetic rearrangements were observed. One type consists of the variation in one or a few discrete, contiguous DRs plus spacer sequences. This variation is probably driven by homologous recombination between adjacent or distant DRs. The other type of polymorphism is probably driven by transpositional events of the insertion sequence, IS6110, which is almost invariably present in the DR cluster of M. tuberculosis complex strains. Based on the nature of the DNA polymorphism in the DR cluster, we developed a novel method of strain differentiation, direct variable repeat polymer chain reaction (DVR-PCR), which enables typing of individual M. tuberculosis strains in a single PCR. The method allows an excellent differentiation of epidemiologically unrelated isolates and, in principle, the DVR-PCR allows the detection of M. tuberculosis and strain differentiation at the same time.     

IS6110, a Mycobacterium tuberculosis complex-specific insertion sequence, is also present in the genome of Mycobacterium smegmatis, suggestive of lateral gene transfer among mycobacterial species

IS6110 is an insertion element found exclusively within the members of the Mycobacterium tuberculosis complex (MTBC), and because of this exclusivity, it has become an important diagnostic tool in the identification of MTBC species. The restriction of IS6110 to the MTBC is hypothesized to arise from the inability of these bacteria to exchange DNA. We have identified an IS6110-related element in a strain of Mycobacterium smegmatis. The presence of IS6110 indicates that lateral gene transfer has occurred among mycobacterial species, suggesting that the mycobacterial gene pool is larger than previously suspected.     

IS6110 Transposition and Evolutionary Scenario of the Direct Repeat Locus in a Group of Closely Related Mycobacterium tuberculosis Strains

In recent years, various polymorphic loci and multicopy insertion elements have been discovered in the Mycobacterium tuberculosis genome, such as the direct repeat (DR) locus, the major polymorphic tandem repeats, the polymorphic GC-rich repetitive sequence, IS6110, and IS1081. These, especially IS6110 and the DR locus, have been widely used as genetic markers to differentiate M. tuberculosis isolates and will continue to be so used, due to the conserved nature of the genome of M. tuberculosis. However, little is known about the processes involved in generating these or of their relative rates of change. Without an understanding of the biological characteristics of these genetic markers, it is difficult to use them to their full extent for understanding the population genetics and epidemiology of M. tuberculosis. To address these points, we identified a cluster of 7 isolates in a collection of 101 clinical isolates and investigated them with various polymorphic genetic markers, which indicated that they were highly related to each other. This cluster provided a model system for the study of IS6110 transposition, evolution at the DR locus, and the effects of these on the determination of evolutionary relationships among M. tuberculosis strains. Our results suggest that IS6110 restriction fragment length polymorphism patterns are useful in grouping closely related isolates together; however, they can be misleading if used for making inferences about the evolutionary relationships between closely related isolates. DNA sequence analysis of the DR loci of these isolates revealed an evolutionary scenario, which, complemented with the information from IS6110, allowed a reconstruction of the evolutionary steps and relationships among these closely related isolates. Loss of the IS6110 copy in the DR locus was noted, and the mechanisms of this loss are discussed.