Toxicity testing of polymer materials for dialysis equipment: is there any need forin vivo testing?

In an earlier work, slightly more than 650 plastic materials, intended for use in medical devices, were tested with a battery of chemical, as well asin vitro andin vivo biological tests. An analysis showed that only a limited number of the tests used were actually necessary to obtain the same pass or fail decision as that obtained using the full test battery. This prompted us to prescreen all new materials with a small test battery consisting of the two most discriminating chemical tests and anin vitro cell growth inhibition test. The present work is a report of our findings after testing another 155 materials using this prescreen system.For each single one of the 155 tested materials the same decision on whether or not to use the material in the intended medical device would have been reached without anyin vivo testing. In no single case in a total of 851in vivo tests did an eluate that had passed thein vitro cell test give rise to a reactionin vivo. Thus, among the tests on living systems the cell test alone seems to be sensitive enough to provide sufficient information. Nothing appears to be gained from thein vivo animal tests. However, some of the materials that passed the prescreening tests later failed in one or several of the chemical tests. Both nonspecific chemical tests and tests for specific molecules seem to detect undesirable levels of leachable substances not detected by the prescreening system. Therefore these tests should not be abandoned. Abandoning unnecessaryin vivo testing, on the other hand, would save considerable costs.     

Comparative cytotoxicity of fumonisin B1 in two cell lines derived from normal human bronchial epithelial cells using four distinct bioassay techniques

This study focuses on the cytotoxic effects of fumonisin B₁ (FB₁) on both immortalised and immortalised and subsequently transfected normal human bronchial epithelial (NHBE) cells of human origin using four bioassays. While the MTT, Neutral Red and hexosaminidase colorimetric assays showed little difference between the toxic effects on the two related cell lines, the clonogenic assay, measuring cell survival and proliferation, indicated that FB₁ had a more toxic effect on the nontransfected cells. This kind ofin vitro approach using cells which retain many characteristics of normal cell growth and differentiation can go some way to developing evaluation models for food safety in the case of mycotoxin contamination without resorting totally to whole animal testing. Nevertheless, one or two cytotoxicity tests may be inadequate for a complete appraisal of toxic potential: rather, as wide a range of methodologies as feasible should be employed initially before meaningful conclusions may be drawn.     

Amphiphilic hydrolyzable polydimethylsiloxane-b-poly(ethyleneglycol methacrylate-co-trialkylsilyl methacrylate) block copolymers for marine coatings. II. Antifouling laboratory tests and field trials

Abstract

Poly(dimethylsiloxane) (PDMS) elastomer coatings containing an amphiphilic hydrolyzable diblock copolymer additive were prepared and their potential as marine antifouling and antiadhesion materials was tested. The block copolymer additive consisted of a PDMS first block and a random poly(trialkylsilyl methacrylate (TRSiMA, R?=?butyl, isopropyl)-co-poly(ethyleneglycol) methacrylate (PEGMA) copolymer second block. PDMS-b-TRSiMA block copolymer additives without PEGMA units were also used as additives. The amphiphilic character of the coating surface was assessed in water using the captive air bubble technique for measurements of static and dynamic contact angles. The attachment of macro- and microorganisms on the coatings was evaluated by field tests and by performing adhesion tests to the barnacle Amphibalanus amphitrite and the green alga Ulva rigida. All the additive-based PDMS coatings showed better antiadhesion properties to A. amphitrite larvae than to U. rigida spores. Field tests provided meaningful information on the antifouling and fouling release activity of coatings over an immersion period of 23?months.     

Systemic candidiasis in mice treated with prednisolone and amphotericin B. 2. Ultrastructure and evidence for fungal toxin

The principal ultrastructural changes in cells of Candida albicans treated with amphotericin B (AmB), either in vitro or in vivo, and in the presence or absence of prednisolone included plasmolysis, vacuolation and destruction of organelles. Lamination of the cell wall, although discernible after 4 h antibiotic treatment in vitro, was conspicuous in vivo, especially in prednisolone-treated mice given AmB 72 h after inoculation and was seen in both phagocytosed cells and those free in inflammatory exudates. Somatic extracts from control cells and somatic extracts and leachates from AmB-treated cells showed the presence of low-grade toxic components when given i.p. to mice receiving actinomycin D(AMD) s.c. Culture filtrates were negative. Eighteen hour cultures were more toxic than those grown for 3 days and no toxicity was shown for cultures after 8 or 14 days. The behaviour of toxic materials during electrophoresis in polyacrylamide gels suggested that they were proteins of relatively high molecular weight.     

Use of in vitro assays to assess hematotoxic effects of environmental compounds

The number of chemicals being introduced into the environment increases and many of these substances may pose a health risk to exposed individuals. Many environmental toxicants with a potential toxicity to the hematopoietic system have been identified by animal experiments. Owing to the risks of severe chronic hematopoietic disorders, it is important to screen chemicals for their hematotoxicity. The aim of this work was to identify, through the use ofin vitro techniques, targets for hematotoxic effects. Our study focused on myeloid and erythroid hematopoietic progenitors and stromal stem cells as possible targets. Thein vitro assays showed that various hematotoxic compounds exert different effects on these cell populations. In vitro exposure of murine bone marrow cells to various inorganic (cadmium, lead) and organic (benzene metabolites, lindane, benzo-[a]-pyrene (BaP), PCB (polychlorinated biphenyl) congeners) environmental chemicals indicated that hematopoietic or stromal bone marrow cells were targets for most of the chemicals. Stromal cells were more affected by lead, cadmium, and BaP compared to myeloid cells. Benzene and phenol gave no response, but the metabolites catechol and hydroquinone were equally toxic to the stromal and the myeloid progenitor cells. Among the PCBs tested, PCB126 was most toxic. Human progenitor cells derived from cord blood were exposedin vitro to catechol, hydroquinone, lead nitrate, and PCBs. Human hematopoietic cells were sensitive to the tested compounds. Human erythroid progenitors are more susceptible to lead exposure than are myeloid progenitors. Based on thein vitro tests, humans are more sensitive to lead, catechol, and PCB126 than are mice. In contrast to the murine data, humans responded with individual differences to lead and PCB126. This revised version was published online in July 2006 with corrections to the Cover Date.     

In vitro biocompatibility of denture relining materials

Objective: The aim of the present study was to evaluate the in vitro biocompatibility of denture relining materials using cell culture tests and a test for irritation mechanisms. Background: Denture relining materials contain non‐reacted constituents that may leach out during use inducing local toxic or irritative effects. Materials and methods: One chemically cured, four visible light cured and five dual‐cured products were included. Cured test specimens were used for the filter diffusion test, and extracts of cured specimens were applied in the MTT and the irritation test using the hen's egg test‐chorioallantoic membrane (HET‐CAM) method. Results: Five of the tested materials were slightly or moderately cytotoxic in the filter diffusion test, and one product coated with a liner induced severe toxicity. Cell cultures incubated for 24 hour with the test samples were more damaged than those incubated for 2 hour. In the MTT test, extracts of nine of the 11 products induced cytotoxicity. No extracts showed irritation, whereas the coating and two bonding agents tested were strong irritants. Conclusion: Most of the tested materials contained water soluble, toxic substances that leach out of the products and that some time was needed to obtain cytotoxic amounts of the leachables. Many dental materials elicit cytotoxic response, but this does not necessarily reflect the long‐term risk for adverse effects as the oral mucosa is generally more resistant to toxic substances than a cell culture.     

Genetic toxicity evaluation of McN-5195: A novel analgesic

McN-5195, (±)trans-3-(2-bromophenyl)octahydroindolizine, a novel analgesic, was tested for genotoxic potential in a battery of tests with endpoints of mutagenicity, chromosomal alterations and DNA damage/ repair. McN-5195 was not mutagenic when tested in the Ames test using strains TA98, TA100, TA1535, TA1537 and TA 1538, in the absence of metabolic activation and in the presence of Aroclor 1254-induced rat or hamster S-9. Negative results were also obtained in the mouse lymphoma assay in the absence of activation, but reproducible mutagenic responses were seen in this mammalian cell assay in the presence of rat S-9 at high levels of induced toxicity (reduced cell growth). Testing of the enantiomers of McN-5195 in this assay supported these findings. A predominance of small mutant colonies in the mouse lymphoma assay suggested a potential chromosomal effect of McN-5195. This was confirmed with positive findings in an in vitro cytogenetics assay using CHO cells, again at toxic exposure levels and only in the presence of S-9. McN-5195 did not induce DNA repair in the primary rat hepatocyte/DNA repair assay, nor did it induce alterations in vivo of chromosome structure or number when tested in a rat bone marrow cytogenetics assay. The findings from this battery of tests indicate that McN-5195 has modest genotoxic activity when tested in the presence of rat liver S-9 in in vitro systems sensitive to cytogenetic change. The absence of genotoxicity in vitro in Salmonella and intact liver cells and in vivo in rat bone marrow suggests that McN-5195 is unlikely to present a genotoxic risk to whole animals.Abbreviations 2-AA 2-anthramine - 9-AA 9-aminoacridine HCI - 2-AAF 2-acetylaminofluorene - AO acridine orange - CHO Chinese hamster ovary - CP cyclophosphamide - EMS ethylmethane sulfonate - ³H-dThd methyl-³H-thymidine - LDH lactate dehydrogenase - 3-MCA 3-methylcholanthrene - McN-5195 (±)-trans-3-(2-bromophenyl) octahydroindolizine - McN-5195-11 hydrochloride salt of McN-5195 - Na azide sodium azide - RCG relative clonal growth - RSG relative suspension growth - RTG relative total growth - SMF spontaneous mutation frequency - TEM triethylenemelamine - TFT trifluorothymidine     

Cell responses and hemocompatibility of <Emphasis Type="Italic">g</Emphasis>-HA/PLA composites

The objective of this study was to investigate the hemocompatibility and cell responses to some novel poly(L-lactide) (PLA) composites containing surface modified hydroxyapatite particles for potential applications as a bone substitute material. The surface of hydroxyapatite (HA) particles was first grafted with L-lactic acid oligomers to form grafted HA (g-HA) particles. The g-HA particles were further blended with PLA to prepare g-HA/PLA composites. Our previous study has shown significant improvement in tensile properties of these materials due to the enhanced interfacial adhesion between the polymer matrix and HA particles. To further investigate the potential applications of these composites in bone repair and other orthopedic surgeries, a series of in vitro and in vivo experiments were conducted to examine the cell responses and hemocompatibility of the materials. In vitro experiments showed that the g-HA/PLA composites were well tolerated by the L-929 cells. Hemolysis of the composites was lower than that of pure PLA. Subcutaneous implantation demonstrated that the g-HA/PLA composites were more favorable than the control materials for soft tissue responses. The results suggested that the g-HA/PLA composites are promising and safe materials with potential applications in tissue engineering.     

A comparative study of cytotoxic effects of N-ethyl-N-nitrosourea,adriamycin, and mono-(2-ethylhexyl)phthalate on mouse primordial germ cells

Several strategies for the assessment of reproductive toxicity of chemical compounds has have been proposed. In the present work, we devised experimental in vitro assays to test the effect of potential toxicants on proliferating primordial germ cells (PGCs) in vitro using recently developed methods for isolation and culture of mouse PGCs. Primordial germ cells are the embryonic precursors of gametes of the adult that carry the genome from generation to generation. Any damage or mutations caused to these cells by potential toxicants might impair normal reproduction and be transmitted to next generation. Three representative compounds, N-ethyl-N-nitrosourea (ENU), adriamycin (ADR), and mono-(2-ethylhexyl)phthalate (MEHP), toxic to different targets and known to affect germ cell development and impair fertility, were tested on PGCs in culture using three different experimental protocols. Survival and growth of PGCs and their ability to adhere to cell monolayers, were taken as endpoints for drug effects. For each compound, sublethal and acute toxicity doses were determined. In addition, information about the mechanisms of action of these compounds on PGCs was obtained. Whereas the effects of ENU and ADR on PGCs were attributable to growth inhibition and apoptosis induction, MEHP affected PGC adhesion to somatic cells without significantly altering their growth and survival. The results of our in vitro tests were not always exactly predictive of the effects of the tested compounds on PGCs in vivo, determined in parallel experiments in which pregnant mice were exposed to the same compounds. Nevertheless, they can provide information on the sensitivity of PGCs to the direct action of drugs or the mechanisms of action of such agents. This revised version was published online in August 2006 with corrections to the Cover Date.     

Preconditioning influences mesenchymal stem cell properties in vitro and in vivo

Various diseases and toxic factors easily impair cellular and organic functions in mammals. Organ transplantation is used to rescue organ function, but is limited by scarce resources. Mesenchymal stem cell (MSC)‐based therapy carries promising potential in regenerative medicine because of the self‐renewal and multilineage potency of MSCs; however, MSCs may lose biological functions after isolation and cultivation for a long time in vitro. Moreover, after they are injected in vivo and migrate into the damaged tissues or organs, they encounter a harsh environment coupled with death signals due to the inadequate tensegrity structure between the cells and matrix. Preconditioning, genetic modification and optimization of MSC culture conditions are key strategies to improve MSC functions in vitro and in vivo, and all of these procedures will contribute to improving MSC transplantation efficacy in tissue engineering and regenerative medicine. Preconditioning with various physical, chemical and biological factors is possible to preserve the stemness of MSCs for further application in studies and clinical tests. In this review, we mainly focus on preconditioning and the corresponding mechanisms for improving MSC activities in vitro and in vivo; we provide a glimpse into the promotion of MSC‐based cell therapy development for regenerative medicine. As a promising consequence, MSC transplantation can be applied for the treatment of some terminal diseases and can prolong the survival time of patients in the near future.     

Synthesis of Arg–Gly–Asp (RGD) Sequence Conjugated Thermo-Reversible Gel via the PEG Spacer Arm as an Extracellular Matrix for a Pheochromocytoma Cell (PC12) Culture

Adhesion molecules composed of Gly–Arg–Gly–Asp–Ser (GRGDS) peptides and cell recognition ligands were inculcated into thermo-reversible hydrogel composed of N-isopropylacrylamide, with a small amount of succinyl poly(ethylene glycol) (PEG) acrylate (MW 3400) used as a biomimetic extracellular matrix (ECM). The GRGDS-containing p(NiPAAm-co-PEG) copolymer gel was studied in vitro for its ability to promote cell spreading and to increase the viability of cells by introducing PEG spacers. Hydrogel lacking the adhesion molecules proved to be a poor ECM for adhesion, permitting only a 20% spread of the seeded cells after 10 days. When PEG spacer arms, immobilized by a peptide linkage, had been integrated into the hydrogel, conjugation of RGD promoted cell spread by 600% in a 10-day trial. In addition, in a serum-free medium, only GRGDS peptides conjugated with the spacer arm were able to promote cell spread. In terms of the cell viability, GRGDS peptides conjugated with the PEG-carrying copolymer gel specifically mediated cell spread. This result supports the theory that specific recognition is the result of interaction between the integrin families on the fibroblast, and the RGD sequence on the p(NiPAAm-co-PEG) copolymer gel.     

In vitro and in vivo toxicity evaluation of the freshwater cyanobacterium Heteroleiblenia kuetzingii

Cyanobacteria are prokaryotic organisms characterized by their ability to produce secondary metabolites with different biological activities. The aim of this work was to evaluate the in vitro and in vivo toxicity of the cosmopolitan freshwater cyanobacterium H. kuetzingii. An extract from H. kuetzingii and cyanobacterial growth media were assessed for presence of intracellular and extracellular toxins by in vitro tests using primary cell cultures from mouse kidney and fibroblasts, cell lines A549 and 3T3, a fish cell line RTgill-W1 as well as by a traditional in vivo mouse bioassay. The presence of toxicity was compared with the ELISA and HPLC data for corresponding cyanotoxins. In vitro tests showed pronounced cytotoxicity of the cyanobacterium extract and growth medium in which H. kuetzingii released potential extracellular toxic compounds as the mammalian cells were significantly more sensitive to exposure compared to the fish cells. Histopathological analyses of the liver and kidneys of treated mice showed pathological changes such as leukocyte infiltration and necrosis, changes in the proximal and distal convoluted tubules, lack of differentiation of Bowman’s space, enlarged Bowman’s capsules and massive hemorrhages. ELISA and HPLC analyses confirmed the presence of saxitoxins and microcystins at low concentrations. In addition, the histological analyses suggest that H. kuetzingii produces other, yet unknown toxic metabolites. Monitoring efforts are therefore required to evaluate the potential hazard for the freshwater aquatic systems and possible public health implications associated with this cyanobacterium.     

Synthesis and characterization of a novel MPEG–chitosan diblock copolymer and self-assembly of nanoparticles

In this paper, a simple and novel method based on free-radical polymerization initiated by potassium persulfate (KPS) was developed to synthesize the MPEG–chitosan diblock copolymer (MPEG–CS). The obtained MPEG–CS diblock copolymer was characterized by Fourier transform infrared (FTIR), ¹H nuclear magnetic resonance (¹H NMR), X-ray diffraction (XRD) and differential scanning calorimetry (DSC), respectively. The MPEG–CS copolymer could self-assemble into nanoparticles in aqueous solution. A typical TEM photography indicated that the well-spherical nanoparticles with diameter at about 200 nm were obtained. In vitro cell culture assay indicated that MPEG–CS nanoparticles are non-toxic and cell-compatible as the polymer concentration was smaller than 0.6 mg/ml. In conclusion, the obtained MPEG–CS nanoparticles might have great potential application in drug-delivery system.     

In vitro cytotoxicity testing for prediction of acute human toxicity

This study was designed to compare the cytotoxic concentrations of chemicals, determined with three independentin vitro cytotoxicity testing protocols, with each other and with established animal LD₅₀ values, and against human toxic concentrations for the same chemicals. Ultimately, these comparisons allow us to evaluate the potential ofin vitro cell culture methods for the ability to screen a variety of chemicals for prediction of human toxicity. Each laboratory independently tested 50 chemicals with known human lethal plasma concentrations and LD₅₀ values. Two of the methods used monolayer cell cultures to measure the incorporation of radiolabeled amino acids into newly synthesized proteins and cellular protein content, while the third technique used the pollen tube growth test. The latter is based on the photometric quantification of pollen tube mass production in suspension culture. Experiments were performed in the absence or presence of increasing doses of the test chemical, during an 18- to 24-h incubation. Inhibitory concentrations were extrapolated from concentration-effect curves after linear regression analysis. Comparison of the cytotoxic concentrations confirms previous independent findings that the experimental IC₅₀ values are more accurate predictors of human toxicity than equivalent toxic blood concentrations (HETC values) derived from rodent LD₅₀s. In addition, there were no conclusive statistical differences among the methods. It is anticipated that, together, these procedures can be used as a battery of tests to supplement or replace currently used animal protocols for human risk assessment.Abbreviations DCP dichlorophenoxyacetic acid - DMEM Dulbecco's modified Eagles' medium - DMSO dimethylsulfoxide - IC inhibitory concentration - LD₅₀ lethal dose 50% - MEIC Multicenter Evaluation forIn Vitro Cytotoxicity - PI₅₀ protein inhibition 50% - PTG pollen tube growth - TCA trichloroacetic acid - TCE trichloroethane     

Single cell-produced and in vitro-assembled anti-FcRH5/CD3 T-cell dependent bispecific antibodies have similar in vitro and in vivo properties

Bispecific antibody production using single host cells has been a new advancement in the antibody engineering field. We previously showed comparable in vitro biological activity and in vivo mouse pharmacokinetics (PK) for two novel single cell variants (v10 and v11) and one traditional dual cell in vitro-assembled anti-human epidermal growth factor receptor 2/CD3 T-cell dependent bispecific (TDB) antibodies. Here, we extended our previous work to assess single cell-produced bispecific variants of a novel TDB against FcRH5, a B-cell lineage marker expressed on multiple myeloma (MM) tumor cells. An in vitro-assembled anti- FcRH5/CD3 TDB antibody was previously developed as a potential treatment option for MM. Two bispecific antibody variants (designs v10 and v11) for manufacturing anti-FcRH5/CD3 TDB in single cells were compared to in vitro-assembled TDB in a dual-cell process to understand whether differences in antibody design and production led to any major differences in their in vitro biological activity, in vivo mouse PK, and PK/pharmacodynamics (PD) or immunogenicity in cynomolgus monkeys (cynos). The binding, in vitro potencies, in vitro pharmacological activities and in vivo PK in mice and cynos of these single cell TDBs were comparable to those of the in vitro-assembled TDB. In addition, the single cell and in vitro-assembled TDBs exhibited robust PD activity and comparable immunogenicity in cynos. Overall, these studies demonstrate that single cell-produced and in vitro-assembled anti-FcRH5/CD3 T-cell dependent bispecific antibodies have similar in vitro and in vivo properties, and support further development of single-cell production method for anti-FcRH5/CD3 TDBs and other single-cell bispecifics.     

Nonviral vector loaded collagen sponges for sustained gene delivery in vitro and in vivo

Background

Naked DNA and standard vectors have previously been used for gene delivery from implantable carrier matrices with great potential for gene therapeutic assistance of wound healing or tissue engineering. We have previously developed copolymer‐protected gene vectors which are inert towards opsonization. Here we examine their potency in carrier‐mediated gene delivery in comparison to standard vectors using a vector‐loaded collagen sponge model.

Methods

Equine collagen type I sponges were loaded by a lyophilization method with naked DNA, polyethylenimine (PEI)‐DNA, DOTAP/cholesterol‐DNA and copolymer‐protected PEI‐DNA. These preparations were characterized in terms of vector‐release, cell growth on the matrices and reporter gene expression by cells colonizing the sponges in vitro and in vivo. Subcutaneous implantation of sponges in rats served as an in vivo model.

Results

At the chosen low vector dose, the loading efficiency was at least 86%. Naked DNA‐loaded collagen matrices lost 77% of the DNA dose in an initial burst in aqueous buffer in vitro. The other preparations examined displayed a sustained vector release. There was no difference in cell growth and invasion of the sponges between vector‐loaded and untreated collagen grafts. Reporter gene expression from cells colonizing the sponges in vitro was observed for not more than 7 days with naked DNA, whereas the lipoplex and polyplex preparations yielded long‐term expression throughout the experimental period of up to 56 days. The highest expression levels were achieved with the PEI‐DNA‐PROCOP (protective copolymer) formulation. Upon subcutaneous implantation in rats, no luciferase expression was detected with naked DNA preparations. DOTAP/cholesterol‐DNA and PEI‐DNA‐loaded implants lead to reporter gene expression for at least 3 days, but with poor reproducibility. PEI‐DNA‐PROCOP collagen matrices yielded consistently the highest reporter gene expression levels for at least 7 days with good reproducibility.

Conclusions

With the preparation method chosen, lipoplex‐ and polyplex‐loaded collagen sponges are superior in mediating sustained gene delivery in vitro and local transfection in vivo as compared to naked DNA‐loaded sponges. Protective copolymers are particularly advantageous in promoting the tranfection capacity of polyplex‐loaded sponges upon subcutaneous implantation, likely due to their stabilizing and opsonization‐inhibiting properties. Copyright © 2002 John Wiley & Sons, Ltd.

     

An Effective Diaryl Derivative Against Leishmania amazonensis and its Influence on the Parasite X Macrophage Interaction

The activity of several diarylheptanoid derivatives (curcuminoids) was previously evaluated against Leishmania amazonensis promastigotes and among them the most active compound was 5-hydroxy-7- (4-hydroxy-3-methoxyphenyl)-1-(4-methoxyphenyl)-1,4,6-heptatrien-3-one. This study was carried out to investigate the influence of this diaryl derivative on the infective promastigotes and Balb/c mice peritoneal macrophage interaction. The potential in?vitro toxicity was also evaluated. Promastigotes pretreated for 24?hours with the compound had their infective capacity significantly decreased. When the infection of Balb/c macrophage by L.?amazonensis promastigotes was already installed, addition of the drug resulted in a diminishing of the infection rate. It was demonstrated that the compound was not toxic to the host macrophage in a concentration equivalent to the LD₅₀/24?h from the previous in?vitro experiment.     

In vitro assessment of environmental toxicology using alveolar cells astarget

Biphasic culture of alveolar cells (alveolar macrophages and type II cells) has been widely developed and permits a precise evaluation of the toxic effects of air pollutants. Clearly, in vitro exposure of alveolar cells to high concentrations of oxidant gases is responsible for a loss of cell viability. In contrast, when exposed to realistic concentrations of gases (NO₂, O₃), cell viability is not altered and various proinflammatory mediators are released. This in vitro model has proved to be sensitive at levels of gas exposure of ambient air quality standards and appears a sensitive biological indicator of air pollutant cell toxicity.Abbreviations AM alveolar macrophages     

Investigation of parameters influencing incorporation,retention and cellular cytotoxicity in liposomal formulations of poorly soluble camptothecin

Abstract

Improving tumor delivery of lipophilic drugs through identifying advanced drug carrier systems with efficient carrier potency is of high importance. We have performed an investigative approach to identify parameters that affect liposomes’ ability to effectively deliver lipophilic camptothecin (CPT) to target cells. CPT is a potent anticancer drug, but its undesired physiological properties are impairing its therapeutic use. In this study, we have identified parameters influencing incorporation and retention of lipophilic CPT in liposomes, evaluating the effect of lipid composition, lipid chemical structure (head and tail group variations, polymer inclusion), zeta potential and anisotropy. Polyethyleneglycol (PEG) surface decoration was included to avoid liposome fusing and increase the potential for prolonged in vivo circulation time. The in vitro effect of the different carrier formulations on cell cytotoxicity was compared and the effect of active targeting of one of the formulations was evaluated. We found that a combination of liposome surface charge, lipid headgroup and carbon chain unsaturation affect CPT incorporation. Retention in liposomes was highly dependent on the liposomal surroundings and liposome zeta potential. Inclusion of lipid tethered PEG provided stability and prevented liposome fusing. PEGylation negatively affected CPT incorporation while improving retention. In vitro cell culture testing demonstrated that all formulations increased CPT potency compared to free CPT, while cationic formulations proved significantly more toxic to cancer cells that healthy cells. Finally, antibody mediated targeting of one liposome formulation further enhanced the selectivity towards targeted cancer cells, rendering normal cells fully viable after 1 hour exposure to targeted liposomes.     

Types and amounts of carcinogens as potential human cancer hazards

Current knowledge on the mechanisms of chemical carcinogenesis forms the basis for application of select short-term in vitro and in vivo tests to detect potential human carcinogens, for ultimate application to hazard assessment. Chemical carcinogenesis involves a series of distinct steps, proceeding from the initiation of a neoplastic cell, through its promotion, development, and progression to cancer. Some chemicals act in each of these stages as initiators, cocarcinogens, promoters, or inhibitors of carcinogenesis. Chemicals can be classified as operating by genotoxic or epigenetic mechanisms, and appropriate tests can be used to detect such properties. These abbreviated tests provide enhanced qualitative decision-making potential since they are based on mechanisms of action. Advances in molecular biology may provide additional tests to detect cancer risk. The quantitative data available from in vitro dose-response studies indicate that carcinogenic effects are dose dependent and, therefore, a threshold or no-effect level probably exists, which is low for potent carcinogens (especially genotoxins) and high for weaker ones (particularly epigenetic agents).Presented at a Symposium: Quantitative Assessment of Cancer Risk-Integration of Biological Events, organized by the Carcinogenesis Specialty Section, Society of Toxicology, (chairmen N.P. Page and D.V. Singh), Washington, D.C., February 23–27,1987.