Identification of Critical Residues for the Tight Binding of Both Correct and Incorrect Nucleotides to Human DNA Polymerase λ

DNA polymerase λ (Pol λ) is a novel X-family DNA polymerase that shares 34% sequence identity with DNA polymerase β. Pre-steady-state kinetic studies have shown that the Pol λ-DNA complex binds both correct and incorrect nucleotides 130-fold tighter, on average, than the DNA polymerase β-DNA complex, although the base substitution fidelity of both polymerases is 10^− 4 to 10^− 5. To better understand Pol λ's tight nucleotide binding affinity, we created single-substitution and double-substitution mutants of Pol λ to disrupt the interactions between active-site residues and an incoming nucleotide or a template base. Single-turnover kinetic assays showed that Pol λ binds to an incoming nucleotide via cooperative interactions with active-site residues (R386, R420, K422, Y505, F506, A510, and R514). Disrupting protein interactions with an incoming correct or incorrect nucleotide impacted binding to each of the common structural moieties in the following order: triphosphate ? base > ribose. In addition, the loss of Watson-Crick hydrogen bonding between the nucleotide and the template base led to a moderate increase in K_d. The fidelity of Pol λ was maintained predominantly by a single residue, R517, which has minor groove interactions with the DNA template.     

DNA polymerase III α subunit from Mycobacterium tuberculosis H37Rv: Homology modeling and molecular docking of its inhibitor

The alpha subunit of Mycobacterial DNA polymerase III holo enzyme catalyzes the polymerization of both DNA strands. The present investigation reports three dimensional (3-D) structure model of DNA polymerase III α subunit of Mycobacterium tuberculosis H37Rv (MtbDnaE1) generated using homology modeling with the backbone structure of DNA polymerase III α of Thermus aquaticus as a template. The model was evaluated at various structure verification servers, which assess the stereo chemical parameters of the residues in the model, as well as structural and functional domains. Comparative analysis of MtbDnaE1 structure reveals the structure of its catalytic domain to be unrelated to that of the human. Successful docking of known inhibitor of bacterial DNA polymerases, 251D onto the modeled MtbDnaE1 was also performed. Therefore, the structure model of MtbDnaE1, a potential anti-mycobacterial target, opens a new avenue for structure-based drug designing against the pathogen. ABBREVIATIONS: aa - amino acid(s), PolIIIα - DNA polymerase III alpha subunit, Taq Pol IIIα - Pol IIIα of Thermus aquaticus, MtbDnaE1 - PolIIIα of Mycobacterium tuberculosis.     

Structure of the Human Rev1-DNA-dNTP Ternary Complex

Y-family DNA polymerases have proven to be remarkably diverse in their functions and in strategies for replicating through DNA lesions. The structure of yeast Rev1 ternary complex has revealed the most radical replication strategy, where the polymerase itself dictates the identity of the incoming nucleotide, as well as the identity of the templating base. We show here that many of the key elements of this highly unusual strategy are conserved between yeast and human Rev1, including the eviction of template G from the DNA helix and the pairing of incoming deoxycytidine 5'-triphosphate with a surrogate arginine residue. We also show that the catalytic core of human Rev1 is uniquely augmented by two large inserts, I1 and I2, wherein I1 extends > 20 Å away from the active site and may serve as a platform for protein-protein interactions specific for Rev1's role in translesion DNA synthesis in human cells, and I2 acts as a “flap” on the hydrophobic pocket accommodating template G. We suggest that these novel structural features are important for providing human Rev1 greater latitude in promoting efficient and error-free translesion DNA synthesis through the diverse array of bulky and potentially carcinogenic N²-deoxyguanosine DNA adducts in human cells.     

Snapshots of a Y-family DNA polymerase in replication: substrate-induced conformational transitions and implications for fidelity of Dpo4

Y-family DNA polymerases catalyze translesion DNA synthesis over damaged DNA. Each Y-family polymerase has a polymerase core consisting of a palm, finger and thumb domain in addition to a fourth domain known as a little finger domain. It is unclear how each domain moves during nucleotide incorporation and what type of conformational changes corresponds to the rate-limiting step previously reported in kinetic studies. Here, we present three crystal structures of the prototype Y-family polymerase: apo-Dpo4 at 1.9 Å resolution, Dpo4-DNA binary complex and Dpo4-DNA-dTMP ternary complex at 2.2 Å resolution. Dpo4 undergoes dramatic conformational changes from the apo to the binary structures with a 131° rotation of the little finger domain relative to the polymerase core upon DNA binding. This DNA-induced conformational change is verified in solution by our tryptophan fluorescence studies. In contrast, the polymerase core retains the same conformation in all three conformationally distinct states. Particularly, the finger domain which is responsible for checking base pairing between the template base and an incoming nucleotide retains a rigid conformation. The inflexibility of the polymerase core likely contributes to the low fidelity of Dpo4, in addition to its loose and solvent-accessible active site. Interestingly, while the binary and ternary complexes of Dpo4 retain an identical global conformation, the aromatic side chains of two conserved tyrosines at the nucleotide-binding site change orientations between the binary and ternary structures. Such local conformational changes may correspond to the rate-limiting step in the mechanism of nucleotide incorporation. Together, the global and local conformational transitions observed in our study provide a structural basis for the distinct kinetic steps of a catalytic cycle of DNA polymerization performed by a Y-family polymerase.     

Structural Basis for Promutagenicity of 8-Halogenated Guanine

8-Halogenated guanine (haloG), a major DNA adduct formed by reactive halogen species during inflammation, is a promutagenic lesion that promotes misincorporation of G opposite the lesion by various DNA polymerases. Currently, the structural basis for such misincorporation is unknown. To gain insights into the mechanism of misincorporation across haloG by polymerase, we determined seven x-ray structures of human DNA polymerase β (polβ) bound to DNA bearing 8-bromoguanine (BrG). We determined two pre-catalytic ternary complex structures of polβ with an incoming nonhydrolyzable dGTP or dCTP analog paired with templating BrG. We also determined five binary complex structures of polβ in complex with DNA containing BrG·C/T at post-insertion and post-extension sites. In the BrG·dGTP ternary structure, BrG adopts syn conformation and forms Hoogsteen base pairing with the incoming dGTP analog. In the BrG·dCTP ternary structure, BrG adopts anti conformation and forms Watson-Crick base pairing with the incoming dCTP analog. In addition, our polβ binary post-extension structures show Hoogsteen BrG·G base pair and Watson-Crick BrG·C base pair. Taken together, the first structures of haloG-containing DNA bound to a protein indicate that both BrG·G and BrG·C base pairs are accommodated in the active site of polβ. Our structures suggest that Hoogsteen-type base pairing between G and C8-modified G could be accommodated in the active site of a DNA polymerase, promoting G to C mutation.     

Different Behaviors In Vivo of Mutations in the β Hairpin Loop of the DNA Polymerases of the Closely Related Phages T4 and RB69

The T4 and RB69 DNA replicative polymerases are members of the B family and are highly similar. Both replicate DNA with high fidelity and employ the same mechanism that allows efficient switching of the primer terminus between the polymerase and exonuclease sites. Both polymerases have a β hairpin loop (hereafter called the β loop) in their exonuclease domains that plays an important role in active-site switching. The β loop is involved in strand separation and is needed to stabilize partially strand-separated exonuclease complexes. In T4 DNA polymerase, modification of the β-loop residue G255 to Ser confers a strong mutator phenotype in vivo due to a reduced ability to form editing complexes. Here, we describe the RB69 DNA polymerase mutant with the equivalent residue (G258) changed to Ser but showing only mild mutator activity in vivo. On the other hand, deletion of the tip of the RB69 β loop confers a strong mutator phenotype in vivo. Based on detailed mutational spectral analyses, DNA binding activities, and coupled polymerase/exonuclease assays, we define the differences between the T4 and RB69 polymerases. We propose that their β loops facilitate strand separation in both polymerases, while the residues that form the loop have low structural constraints.     

Structure of the PolIIIα-τc-DNA Complex Suggests an Atomic Model of the Replisome

1. Download : Download high-res image (457KB)
2. Download : Download full-size image

Highlights? Crystal structure of the DNA polymerase IIIα in complex with τ_c and a DNA substrate ? τ_c interacts with the C-terminal domain of PolIIIα through its C-terminal helix and the loop that follows it ? PolIIIα in complex with τ_c and DNA displays an open form ? The structure of this complex suggests an atomic model of the bacterial replisome     

Processivity factor of DNA polymerase and its expanding role in normal and translesion DNA synthesis

Clamp protein or clamp, initially identified as the processivity factor of the replicative DNA polymerase, is indispensable for the timely and faithful replication of DNA genome. Clamp encircles duplex DNA and physically interacts with DNA polymerase. Clamps from different organisms share remarkable similarities in both structure and function. Loading of clamp onto DNA requires the activity of clamp loader. Although all clamp loaders act by converting the chemical energy derived from ATP hydrolysis to mechanical force, intriguing differences exist in the mechanistic details of clamp loading. The structure and function of clamp in normal and translesion DNA synthesis has been subjected to extensive investigations. This review summarizes the current understanding of clamps from three kingdoms of life and the mechanism of loading by their cognate clamp loaders. We also discuss the recent findings on the interactions between clamp and DNA, as well as between clamp and DNA polymerase (both the replicative and specialized DNA polymerases). Lastly the role of clamp in modulating polymerase exchange is discussed in the context of translesion DNA synthesis.     

Examination of the role of the clamp-loader and ATP hydrolysis in the formation of the bacteriophage T4 polymerase holoenzyme

Transient kinetic analyses further support the role of the clamp-loader in bacteriophage T4 as a catalyst which loads the clamp onto DNA through the sequential hydrolysis of two molecules of ATP before and after addition of DNA. Additional rapid-quench and pulse-chase experiments have documented this stoichiometry. The events of ATP hydrolysis have been related to the opening/closing of the clamp protein through fluorescence resonance energy transfer (FRET). In the absence of a hydrolysable form of ATP, the distance across the subunit interface of the clamp does not increase as measured by intramolecular FRET, suggesting gp45 cannot be loaded onto DNA. Therefore, ATP hydrolysis by the clamp-loader appears to open the clamp wide enough to encircle DNA easily. Two additional molecules of ATP then are hydrolyzed to close the clamp onto DNA. The presence of an intermolecular FRET signal indicated that the dissociation of the clamp-loader from this complex occurred after guiding the polymerase onto the correct face of the clamp bound to DNA. The final holoenzyme complex consists of the clamp, DNA, and the polymerase. Although this sequential assembly mechanism can be generally applied to most other replication systems studied to date, the specifics of ATP utilization seem to vary across replication systems.     

The biochemistry and fidelity of synthesis by the apicoplast genome replication DNA polymerase Pfprex from the malaria parasite Plasmodium falciparum

Plasmodium falciparum, the major causative agent of human malaria, contains three separate genomes. The apicoplast (an intracellular organelle) contains an ∼ 35-kb circular DNA genome of unusually high A/T content (> 86%) that is replicated by the nuclear-encoded replication complex Pfprex. Herein, we have expressed and purified the DNA polymerase domain of Pfprex [KPom1 (Klenow-like polymerase of malaria 1)] and measured its fidelity using a LacZ-based forward mutation assay. In addition, we analyzed the kinetic parameters for the incorporation of both complementary and noncomplementary nucleotides using Kpom1 lacking 3′ → 5′ exonucleolytic activity. KPom1 exhibits a strongly biased mutational spectrum in which T → C is the most frequent single-base substitution and differs significantly from the closely related Escherichia coli DNA polymerase I. Using E. coli harboring a temperature-sensitive polymerase I allele, we established that KPom1 can complement the growth-defective phenotype at an elevated temperature. We propose that the error bias of KPom1 may be exploited in the complementation assay to identify nucleoside analogs that mimic this base-mispairing and preferentially inhibit apicoplast DNA replication.     

A direct proofreader–clamp interaction stabilizes the Pol III replicase in the polymerization mode

Processive DNA synthesis by the αεθ core of the Escherichia coli Pol III replicase requires it to be bound to the β₂ clamp via a site in the α polymerase subunit. How the ε proofreading exonuclease subunit influences DNA synthesis by α was not previously understood. In this work, bulk assays of DNA replication were used to uncover a non‐proofreading activity of ε. Combination of mutagenesis with biophysical studies and single‐molecule leading‐strand replication assays traced this activity to a novel β‐binding site in ε that, in conjunction with the site in α, maintains a closed state of the αεθ–β₂ replicase in the polymerization mode of DNA synthesis. The ε–β interaction, selected during evolution to be weak and thus suited for transient disruption to enable access of alternate polymerases and other clamp binding proteins, therefore makes an important contribution to the network of protein–protein interactions that finely tune stability of the replicase on the DNA template in its various conformational states.     

Role of human DNA polymerase κ in extension opposite from a cis-syn thymine dimer

Exposure of DNA to UV radiation causes covalent linkages between adjacent pyrimidines. The most common lesion found in DNA from these UV-induced linkages is the cis-syn cyclobutane pyrimidine dimer. Human DNA polymerase κ (Polκ), a member of the Y-family of DNA polymerases, is unable to insert nucleotides opposite the 3'T of a cis-syn T-T dimer, but it can efficiently extend from a nucleotide inserted opposite the 3'T of the dimer by another DNA polymerase. We present here the structure of human Polκ in the act of inserting a nucleotide opposite the 5'T of the cis-syn T-T dimer. The structure reveals a constrained active-site cleft that is unable to accommodate the 3'T of a cis-syn T-T dimer but is remarkably well adapted to accommodate the 5'T via Watson-Crick base pairing, in accord with a proposed role for Polκ in the extension reaction opposite from cyclobutane pyrimidine dimers in vivo.     

The C-terminal Domain (CTD) of Human DNA Glycosylase NEIL1 Is Required for Forming BERosome Repair Complex with DNA Replication Proteins at the Replicating Genome: DOMINANT NEGATIVE FUNCTION OF THE CTD*

The human DNA glycosylase NEIL1 was recently demonstrated to initiate prereplicative base excision repair (BER) of oxidized bases in the replicating genome, thus preventing mutagenic replication. A significant fraction of NEIL1 in cells is present in large cellular complexes containing DNA replication and other repair proteins, as shown by gel filtration. However, how the interaction of NEIL1 affects its recruitment to the replication site for prereplicative repair was not investigated. Here, we show that NEIL1 binarily interacts with the proliferating cell nuclear antigen clamp loader replication factor C, DNA polymerase δ, and DNA ligase I in the absence of DNA via its non-conserved C-terminal domain (CTD); replication factor C interaction results in ∼8-fold stimulation of NEIL1 activity. Disruption of NEIL1 interactions within the BERosome complex, as observed for a NEIL1 deletion mutant (N311) lacking the CTD, not only inhibits complete BER in vitro but also prevents its chromatin association and reduced recruitment at replication foci in S phase cells. This suggests that the interaction of NEIL1 with replication and other BER proteins is required for efficient repair of the replicating genome. Consistently, the CTD polypeptide acts as a dominant negative inhibitor during in vitro repair, and its ectopic expression sensitizes human cells to reactive oxygen species. We conclude that multiple interactions among BER proteins lead to large complexes, which are critical for efficient BER in mammalian cells, and the CTD interaction could be targeted for enhancing drug/radiation sensitivity of tumor cells.     

Integrative Modelling Coupled with Ion Mobility Mass Spectrometry Reveals Structural Features of the Clamp Loader in Complex with Single-Stranded DNA Binding Protein

DNA polymerase III, a decameric 420-kDa assembly, simultaneously replicates both strands of the chromosome in Escherichia coli. A subassembly of this holoenzyme, the seven-subunit clamp loader complex, is responsible for loading the sliding clamp (β₂) onto DNA. Here, we use structural information derived from ion mobility mass spectrometry (IM-MS) to build three-dimensional models of one form of the full clamp loader complex, γ₃δδ′ψχ (254 kDa). By probing the interaction between the clamp loader and a single-stranded DNA (ssDNA) binding protein (SSB₄) and by identifying two distinct conformational states, with and without ssDNA, we assemble models of ψχ–SSB₄ (108 kDa) and the clamp loader–SSB₄ (340 kDa) consistent with IM data. A significant increase in measured collision cross-section (~ 10%) of the clamp loader–SSB₄ complex upon DNA binding suggests large conformational rearrangements. This DNA bound conformation represents the active state and, along with the presence of ψχ, stabilises the clamp loader–SSB₄ complex. Overall, this study of a large heteromeric complex analysed by IM-MS, coupled with integrative modelling, highlights the potential of such an approach to reveal structural features of previously unknown complexes of high biological importance.     

DNA replication defects in a mutant deficient in the thioredoxin homolog YbbN

Escherichia coli contains two thioredoxins, Trx1 and Trx2, and a thioredoxin-like protein, YbbN, that displays both redox and chaperone properties. Since three out of the six proteins of the YbbN interactome (Butland et al., 2005) are components of DNA polymerase 3 holoenzyme (i.e. the β-clamp DnaN, the θ subunit HolE and the δ′ subunit HolB), we investigated whether the ybbN mutant presents DNA replication defects. We found that this mutant incorporates ³H-thymidine at higher rates than the parental strain and displays overinitiation, hypermutator and filamentation phenotypes with the occurrence of anucleated cells. Moreover, YbbN functions as a bona fide chaperone in the refolding of the urea-unfolded β-clamp. These results suggest that the DNA replication and cell division defects of the ybbN mutant might best be explained by chaperone functions of YbbN in the biogenesis of DNA polymerase 3 holoenzyme.     

DNA polymerase switching on homotrimeric PCNA at the replication fork of the euryarchaea Pyrococcus abyssi

DNA replication in Archaea, as in other organisms, involves large protein complexes called replisomes. In the Euryarchaeota subdomain, only two putative replicases have been identified, and their roles in leading and lagging strand DNA synthesis are still poorly understood. In this study, we focused on the coupling of proliferating cell nuclear antigen (PCNA)-loading mechanisms with DNA polymerase function in the Euryarchaea Pyrococcus abyssi. PCNA spontaneously loaded onto primed DNA, and replication factor C dramatically increased this loading. Surprisingly, the family B DNA polymerase (Pol B) also increased PCNA loading, probably by stabilizing the clamp on primed DNA via an essential motif. In contrast, on an RNA-primed DNA template, the PCNA/Pol B complex was destabilized in the presence of dNTPs, allowing the family D DNA polymerase (Pol D) to perform RNA-primed DNA synthesis. Then, Pol D is displaced by Pol B to perform processive DNA synthesis, at least on the leading strand.     

Crystal structures of a ddATP-, ddTTP-, ddCTP, and ddGTP- trapped ternary complex of Klentaq1: insights into nucleotide incorporation and selectivity

The mechanism by which DNA polymerase I enzymes function has been the subject of extensive biochemical and structural studies. We previously determined the structure of a ternary complex of the large fragment of DNA polymerase I from Thermus aquaticus (Klentaq1) bound to a primer/template DNA and a dideoxycytidine 5'-triphosphate (ddCTP). In this report, we present the details of the 2.3-A resolution crystal structures of three additional ternary complexes of Klentaq1 bound to a primer/template DNA and a dideoxyguanosine 5'-triphosphate (ddGTP), a dideoxythymidine 5'-triphosphate (ddTTP), or a dideoxyadenosine 5'-triphosphate (ddATP). Comparison of the active site of the four ternary complexes reveals that the protein residues around the nascent base pair (that formed between the incoming dideoxynucleoside triphosphate [ddNTP] and the template base) form a snug binding pocket into which only a correct Watson-Crick base pair can fit. Except in the ternary complex bound to dideoxyguanosine 5'-triphosphate, there are no sequence specific contacts between the protein side chains and the nascent base pair, suggesting that steric constraints imposed by the protein onto the nascent base pair is the major contributor to nucleotide selectivity at the polymerase active site. The protein around the polymerase active site also shows plasticity, which may be responsible for the substrate diversity of the enzyme. Two conserved side chains, Q754 and R573, form hydrogen bonds with the N3 atom in the purine base and O2 atom in the pyrimidine base at the minor groove side of the base pair formed by the incorporated ddNMP and the corresponding template base in all the four ternary complexes. These hydrogen-bonding interactions may provide a means of detecting misincorporation at this position.     

Architecture of the Pol III–clamp–exonuclease complex reveals key roles of the exonuclease subunit in processive DNA synthesis and repair

DNA polymerase III (Pol III) is the catalytic α subunit of the bacterial DNA Polymerase III holoenzyme. To reach maximum activity, Pol III binds to the DNA sliding clamp β and the exonuclease ε that provide processivity and proofreading, respectively. Here, we characterize the architecture of the Pol III–clamp–exonuclease complex by chemical crosslinking combined with mass spectrometry and biochemical methods, providing the first structural view of the trimeric complex. Our analysis reveals that the exonuclease is sandwiched between the polymerase and clamp and enhances the binding between the two proteins by providing a second, indirect, interaction between the polymerase and clamp. In addition, we show that the exonuclease binds the clamp via the canonical binding pocket and thus prevents binding of the translesion DNA polymerase IV to the clamp, providing a novel insight into the mechanism by which the replication machinery can switch between replication, proofreading, and translesion synthesis.     

Fluorescence measurements on the E.coli DNA polymerase clamp loader: implications for conformational changes during ATP and clamp binding

Sliding clamps are ring-shaped proteins that tether DNA polymerases to their templates during processive DNA replication. The action of ATP-dependent clamp loader complexes is required to open the circular clamps and to load them onto DNA. The crystal structure of the pentameric clamp loader complex from Escherichia coli (the gamma complex), determined in the absence of nucleotides, revealed a highly asymmetric and extended form of the clamp loader. Consideration of this structure suggested that a compact and more symmetrical inactive form may predominate in solution in the absence of crystal packing forces. This model has the N-terminal domains of the delta and delta' subunits of the clamp loader close to each other in the inactive state, with the clamp loader opening in a crab-claw-like fashion upon ATP-binding. We have used fluorescence resonance energy transfer (FRET) to investigate the structural changes in the E.coli clamp loader complex that result from ATP-binding and interactions between the clamp loader and the beta clamp. FRET measurements using fluorophores placed in the N-terminal domains of the delta and delta' subunits indicate that the distances between these subunits in solution are consistent with the previously crystallized extended form of the clamp loader. Furthermore, the addition of nucleotide and clamp to the labeled clamp loader does not appreciably alter these FRET distances. Our results suggest that the changes that occur in the relative positioning of the delta and delta' subunits when ATP binds to and activates the complex are subtle, and that crab-claw-like movements are not a significant component of the clamp loader mechanism.