SdrF,a Staphylococcus epidermidis Surface Protein,Contributes to the Initiation of Ventricular Assist Device Driveline–Related Infections

Staphylococcus epidermidis remains the predominant pathogen in prosthetic-device infections. Ventricular assist devices, a recently developed form of therapy for end-stage congestive heart failure, have had considerable success. However, infections, most often caused by Staphylococcus epidermidis, have limited their long-term use. The transcutaneous driveline entry site acts as a potential portal of entry for bacteria, allowing development of either localized or systemic infections. A novel in vitro binding assay using explanted drivelines obtained from patients undergoing transplantation and a heterologous lactococcal system of surface protein expression were used to identify S. epidermidis surface components involved in the pathogenesis of driveline infections. Of the four components tested, SdrF, SdrG, PIA, and GehD, SdrF was identified as the primary ligand. SdrF adherence was mediated via its B domain attaching to host collagen deposited on the surface of the driveline. Antibodies directed against SdrF reduced adherence of S. epidermidis to the drivelines. SdrF was also found to adhere with high affinity to Dacron, the hydrophobic polymeric outer surface of drivelines. Solid phase binding assays showed that SdrF was also able to adhere to other hydrophobic artificial materials such as polystyrene. A murine model of infection was developed and used to test the role of SdrF during in vivo driveline infection. SdrF alone was able to mediate bacterial adherence to implanted drivelines. Anti-SdrF antibodies reduced S. epidermidis colonization of implanted drivelines. SdrF appears to play a key role in the initiation of ventricular assist device driveline infections caused by S. epidermidis. This pluripotential adherence capacity provides a potential pathway to infection with SdrF-positive commensal staphylococci first adhering to the external Dacron-coated driveline at the transcutaneous entry site, then spreading along the collagen-coated internal portion of the driveline to establish a localized infection. This capacity may also have relevance for other prosthetic device–related infections.     

Atomic force microscopy reveals a dual collagen‐binding activity for the staphylococcal surface protein SdrF

Staphylococcus epidermidis causes nosocomial infections by colonizing and forming biofilms on indwelling medical devices. This process involves specific interactions between cell wall‐anchored (CWA) proteins and host proteins adsorbed onto the biomaterial. Here, we have explored the molecular forces by which the S. epidermidis CWA protein serine‐aspartate repeat protein F (SdrF) binds to type I collagen, by means of advanced atomic force microscopy (AFM) techniques. Using single‐cell force spectroscopy, we found that SdrF mediates bacterial adhesion to collagen‐coated substrates through both weak and strong bonds. Single‐molecule force spectroscopy demonstrated that these bonds involve the A and B regions of SdrF, thus revealing that the protein is capable of dual ligand‐binding activity. Both weak and strong bonds showed high dissociation rates, indicating they are much less stable than those formed by the well‐characterized ‘dock, lock and latch’ mechanism. Collectively, our results show that CWA proteins can bind to ligands by novel mechanisms. We anticipate that AFM will greatly contribute to the identification of novel binding partners and binding mechanisms in staphylococcal CWA proteins.     

Is the GehD lipase from Staphylococcus epidermidis a collagen binding adhesin?

The opportunistic human pathogen Staphylococcus epidermidis is the major cause of nosocomial biomaterial infections. S. epidermidis has the ability to attach to indwelling materials coated with extracellular matrix proteins such as fibrinogen, fibronectin, vitronectin, and collagen. To identify the proteins necessary for S. epidermidis attachment to collagen, we screened an expression library using digoxigenin-labeled collagen as well as two monoclonal antibodies generated against the Staphylococcus aureus collagen-adhesin, Cna, as probes. These monoclonal antibodies recognize collagen binding epitopes on the surface of S. aureus and S. epidermidis cells. Using this approach, we identified GehD, the extracellular lipase originally found in S. epidermidis 9, as a collagen-binding protein. Despite the monoclonal antibody cross-reactivity, the GehD amino acid sequence and predicted structure are radically different from those of Cna. The mature GehD circular dichroism spectra differs from that of Cna but strongly resembles that of a mammalian cell-surface collagen binding receptor, known as the alpha(1) integrin I domain, suggesting that they have similar secondary structures. The GehD protein is translated as a preproenzyme, secreted, and post-translationally processed into mature lipase. GehD does not have the conserved LPXTG C-terminal motif present in cell wall-anchored proteins, but it can be detected in lysostaphin cell wall extracts. A recombinant version of mature GehD binds to collagens type I, II, and IV adsorbed onto microtiter plates in a dose-dependent saturable manner. Recombinant, mature GehD protein and anti-GehD antibodies can inhibit the attachment of S. epidermidis to immobilized collagen. These results provide evidence that GehD may be a bi-functional molecule, acting not only as a lipase but also as a cell surface-associated collagen adhesin.     

Fibronectin binding to the Salmonella enterica serotype Typhimurium ShdA autotransporter protein is inhibited by a monoclonal antibody recognizing the A3 repeat

ShdA is a large outer membrane protein of the autotransporter family whose passenger domain binds the extracellular matrix proteins fibronectin and collagen I, possibly by mimicking the host ligand heparin. The ShdA passenger domain consists of approximately 1,500 amino acid residues that can be divided into two regions based on features of the primary amino acid sequence: an N-terminal nonrepeat region followed by a repeat region composed of two types of imperfect direct amino acid repeats, called type A and type B. The repeat region bound bovine fibronectin with an affinity similar to that for the complete ShdA passenger domain, while the nonrepeat region exhibited comparatively low fibronectin-binding activity. A number of fusion proteins containing truncated fragments of the repeat region did not bind bovine fibronectin. However, binding of the passenger domain to fibronectin was inhibited in the presence of immune serum raised to one truncated fragment of the repeat region that contained repeats A2, B8, A3, and B9. Furthermore, a monoclonal antibody that specifically recognized an epitope in a recombinant protein containing the A3 repeat inhibited binding of ShdA to fibronectin.     

Selective binding of collagen subtypes by integrin alpha 1I, alpha 2I, and alpha 10I domains

Four integrins, namely alpha(1)beta(1), alpha(2)beta(1), alpha(10)beta(1), and alpha(11)beta(1), form a special subclass of cell adhesion receptors. They are all collagen receptors, and they recognize their ligands with an inserted domain (I domain) in their alpha subunit. We have produced the human integrin alpha(10)I domain as a recombinant protein to reveal its ligand binding specificity. In general, alpha(10)I did recognize collagen types I-VI and laminin-1 in a Mg(2+)-dependent manner, whereas its binding to tenascin was only slightly better than to albumin. When alpha(10)I was tested together with the alpha(1)I and alpha(2)I domains, all three I domains seemed to have their own collagen binding preferences. The integrin alpha(2)I domain bound much better to fibrillar collagens (I-III) than to basement membrane type IV collagen or to beaded filament-forming type VI collagen. Integrin alpha(1)I had the opposite binding pattern. The integrin alpha(10)I domain was similar to the alpha(1)I domain in that it bound very well to collagen types IV and VI. Based on the previously published atomic structures of the alpha(1)I and alpha(2)I domains, we modeled the structure of the alpha(10)I domain. The comparison of the three I domains revealed similarities and differences that could potentially explain their functional differences. Mutations were introduced into the alphaI domains, and their binding to types I, IV, and VI collagen was tested. In the alpha(2)I domain, Asp-219 is one of the amino acids previously suggested to interact directly with type I collagen. The corresponding amino acid in both the alpha(1)I and alpha(10)I domains is oppositely charged (Arg-218). The mutation D219R in the alpha(2)I domain changed the ligand binding pattern to resemble that of the alpha(1)I and alpha(10)I domains and, vice versa, the R218D mutation in the alpha(1)I and alpha(10)I domains created an alpha(2)I domain-like ligand binding pattern. Thus, all three collagen receptors appear to differ in their ability to recognize distinct collagen subtypes. The relatively small structural differences on their collagen binding surfaces may explain the functional specifics.     

Monkey rotavirus binding to alpha2beta1 integrin requires the alpha2 I domain and is facilitated by the homologous beta1 subunit

Rotaviruses utilize integrins during virus-cell interactions that lead to infection. Cell binding and infection by simian rotavirus SA11 were inhibited by antibodies (Abs) to the inserted (I) domain of the alpha2 integrin subunit. To determine directly which integrins or other proteins bind rotaviruses, cell surface proteins precipitated by rotaviruses were compared with those precipitated by anti-alpha2beta1 Abs. Two proteins precipitated by SA11 and rhesus rotavirus RRV from MA104 and Caco-2 cells migrated indistinguishably from alpha2beta1 integrin, and SA11 precipitated beta1 from alpha2beta1-transfected CHO cells. These viruses specifically precipitated two MA104 cell proteins only, but an additional 160- to 165-kDa protein was precipitated by SA11 from Caco-2 cells. The role of the alpha2 I domain in rotavirus binding, infection, and growth was examined using CHO cell lines expressing wild-type or mutated human alpha2 or alpha2beta1. Infectious SA11 and RRV, but not human rotavirus Wa, specifically bound CHO cell-expressed human alpha2beta1 and, to a lesser extent, human alpha2 combined with hamster beta1. Binding was inhibited by anti-alpha2 I domain monoclonal Abs (MAbs), but not by non-I domain MAbs to alpha2, and required the presence of the alpha2 I domain. Amino acid residues 151, 221, and 254 in the metal ion-dependent adhesion site of the alpha2 I domain that are necessary for type I collagen binding to alpha2beta1 were not essential for rotavirus binding. Rotavirus-alpha2beta1 binding led to increased virus infection and RRV growth. SA11 and RRV require the alpha2 I domain for binding to alpha2beta1, and their binding to this integrin is distinguishable from that of collagen.     

Distinct recognition of collagen subtypes by alpha(1)beta(1) and alpha(2)beta(1) integrins. Alpha(1)beta(1) mediates cell adhesion to type XIII collagen

Two integrin-type collagen receptors, alpha(1)beta(1) and alpha(2)beta(1), are structurally very similar. However, cells can concomitantly express the both receptors and they might have independent functions. Here, Chinese hamster ovary (CHO) cells, which lack endogenous collagen receptors, were transfected with either alpha(1) or alpha(2) integrin cDNA. Cells were allowed to adhere to various collagen types and their integrin function was tested by observing the progression of cell spreading. The cells expressing alpha(1)beta(1) integrin could spread on collagen types I, III, IV, and V but not on type II, while alpha(2)beta(1) integrin could mediate cell spreading on collagen types I-V. Type XIII is a transmembrane collagen and its interaction with the integrins has not been previously studied. CHO-alpha1beta1 cells could spread on human recombinant type XIII collagen, unlike CHO-alpha2beta1 cells. Integrins alpha(1)beta(1) and alpha(2)beta(1) recognize collagens with the specific alphaI domains. The alpha(1)I and alpha(2)I domains were produced as recombinant proteins, labeled with europium and used in a sensitive solid-phase binding assay based on time-resolved fluorescence. alpha(1)I domain, unlike the alpha(2)I domain, could attach to type XIII collagen. The results indicate, that alpha(1)beta(1) and alpha(2)beta(1) have different ligand binding specificity. Distinct recognition of different collagen subtypes by the alphaI domains can partially explain the differences seen in cell spreading. However, despite the fact that CHO-alpha1beta1 cells could not spread on type II collagen alpha(1)I domain could bind to this collagen type. Thus, the cell spreading on collagens may also be regulated by factors other than the integrins.     

Integrin-mediated cell adhesion to type I collagen fibrils

In the integrin family, the collagen receptors form a structurally and functionally distinct subgroup. Two members of this subgroup, alpha(1)beta(1) and alpha(2)beta(1) integrins, are known to bind to monomeric form of type I collagen. However, in tissues type I collagen monomers are organized into large fibrils immediately after they are released from cells. Here, we studied collagen fibril recognition by integrins. By an immunoelectron microscopy method we showed that integrin alpha(2)I domain is able to bind to classical D-banded type I collagen fibrils. However, according to the solid phase binding assay, the collagen fibril formation appeared to reduce integrin alpha(1)I and alpha(2)I domain avidity to collagen and to lower the number of putative alphaI domain binding sites on it. Respectively, cellular alpha(1)beta(1) integrin was able to mediate cell spreading significantly better on monomeric than on fibrillar type I collagen matrix, whereas alpha(2)beta(1) integrin appeared still to facilitate both cell spreading on fibrillar type I collagen matrix and also the contraction of fibrillar type I collagen gel. Additionally, alpha(2)beta(1) integrin promoted the integrin-mediated formation of long cellular projections typically induced by fibrillar collagen. Thus, these findings suggest that alpha(2)beta(1) integrin is a functional cellular receptor for type I collagen fibrils, whereas alpha(1)beta(1) integrin may only effectively bind type I collagen monomers. Furthermore, when the effect of soluble alphaI domains on type I collagen fibril formation was tested in vitro, the observations suggest that integrin type collagen receptors might guide or even promote pericellular collagen fibrillogenesis.     

Structural and functional analysis of integrin alpha2I domain interaction with echovirus 1

Integrins are cell surface receptors for several microbial pathogens including echovirus 1 (EV1), a picornavirus. Cryo-electron microscopy revealed that the functional domain (alpha(2)I) of human alpha(2)beta(1) integrin binds to a surface depression on the EV1 capsid. This three-dimensional structure of EV1 bound to alpha(2)I domain provides the first structural details of an integrin interacting with a picornavirus. The model indicates that alpha(2)beta(1) integrin cannot simultaneously bind both EV1 and the physiological ligand collagen. Compared with collagen binding to the alpha(2)I domain, the virus binds with a 10-fold higher affinity but in vitro uncoating of EV1 was not observed as a result of attachment of alpha(2)I. A molecular model, constructed on the basis of the EV1-integrin complex, shows that multiple alpha(2)beta(1) heterodimers can bind at adjacent sites around the virus 5-fold symmetry axes without steric hindrance. In agreement with this, virus attachment to alpha(2)beta(1) integrin on the cell surface was found to result in integrin clustering, which can give rise to signaling and facilitate the initiation of the viral entry process that takes place via caveolae-mediated endocytosis.     

Determinants of ligand binding specificity of the alpha(1)beta(1) and alpha(2)beta(1) integrins.

The alpha(1)beta(1) and alpha(2)beta(1) integrins are cell surface collagen receptors. Cells expressing the alpha(1)beta(1) integrin preferentially adhere to collagen IV, whereas cells expressing the alpha(2)beta(1) integrin preferentially adhere to collagen I. Recombinant alpha(1) and alpha(2) integrin I domains exhibit the same collagen type preferences as the intact integrins. In addition, the alpha(2) integrin I domain binds echovirus 1; the alpha(1) I domain does not. To identify the structural components of the I domains responsible for the varying ligand specificities, we have engineered several alpha(1)/alpha(2) integrin I domain chimeras and evaluated their virus and collagen binding activities. Initially, large secondary structural components of the alpha(2) I domain were replaced with corresponding regions of the alpha(1) I domain. Following analysis in echovirus 1 and collagen binding assays, chimeras with successively smaller regions of alpha(1) I were constructed and analyzed. The chimeras were analyzed by ELISA with several different alpha(2) integrin monoclonal antibodies to assess their proper folding. Three different regions of the alpha(1) I domain, when present in the alpha(2) I domain, conferred enhanced collagen IV binding activity upon the alpha(2) I domain. These include the alpha3 and alpha5 helices and a portion of the alpha6 helix. Echovirus 1 binding was lost in a chimera containing the alphaC-alpha6 loop; higher resolution mapping identified Asn(289) as playing a critical role in echovirus 1 binding. Asn(289) had not been implicated in previous echovirus 1 binding studies. Taken together, these data reveal the existence of multiple determinants of ligand binding specificities within the alpha(1) and alpha(2) integrin I domains.     

Crystal structure of EMS16 in complex with the integrin alpha2-I domain

Snake venoms contain a number of heterodimeric C-type lectin-like proteins (CLPs) that interact specifically with components of the haemostatic system. EMS16 from the venom of Echis multisquamatus binds to the collagen receptor, integrin alpha2beta1, also known as glycoprotein (GP) Ia/IIa, and specifically inhibits collagen binding. Here we report the crystal structure of EMS16 in complex with recombinant integrin alpha2-I domain that plays a central role in collagen binding. The structure of the complex at 1.9 Angstrom resolution reveals that the collagen-binding site of the alpha2-I domain is covered completely by the bound EMS16. This blockage by EMS16 appears to spatially inhibit collagen binding to the alpha2-I domain. The bound alpha2-I domain adopts a closed conformation, which is seen in the absence of ligand, suggesting that EMS16 stabilizes a closed conformation corresponding to the less active structure of the alpha2-I domain. EMS16 does not directly bind to the manganese ion and residues of the metal ion-dependent adhesion site (MIDAS) of the alpha2-I domain, suggesting that EMS16 may have the potential to bind specifically to the alpha2-I domain in a metal ion-independent fashion.     

Binding of soluble type I collagen to fibroblasts: specificities for native collagen types, triple helical structure, telopeptides, propeptides, and cyanogen bromide-derived peptides

Unlabeled collagenous proteins were quantified as inhibitors of binding of native, soluble, radioiodinated type I collagen to the fibroblast surface. Collagen types IV, V a minor cartilage isotype (1 alpha 2 alpha 3 alpha), and the collagenlike tail of acetylcholinesterase did not inhibit binding. Collagen types II and III behaved as competitive inhibitors of type I binding. Denaturation of native collagenous molecules exposed cryptic inhibitory determinants in the separated constituent alpha chains. Inhibition of binding by unlabeled type I collagen was not changed by enzymatic removal of the telopeptides. Inhibitory determinants were detected in cyanogen bromide-derived peptides from various regions of helical alpha 1 (I) and alpha 1(III) chains. The aminoterminal propeptide of chick pro alpha 1(I) was inhibitory for binding, whereas the carboxyterminal three-chain propeptide fragment of human type I procollagen was not. The data are discussed in terms of the proposal that binding to surface receptors initiates the assembly of periodic collagen fibrils in vivo.     

Role of fibronectin-binding MSCRAMMs in bacterial adherence and entry into mammalian cells

Most bacterial infections are initiated by the adherence of microorganisms to host tissues. This process involves the interaction of specific bacterial surface structures, called adhesins, with host components. In this review, we discuss a group of microbial adhesins known as Microbial Surface Components Recognizing Adhesive Matrix Molecules (MSCRAMMs) which recognize and bind FN. The interaction of bacteria with FN is believed to contribute significantly to the virulence of a number of microorganisms, including staphylococci and streptococci. Several FN-binding MSCRAMMs of staphylococci and streptococci exhibit a similar structural organization and mechanism of ligand recognition. The ligand-binding domain consists of tandem repeats of a ∼45 amino acid long unit which bind to the 29-kDa N-terminal region of FN. The binding mechanism is unusual in that the repeat units are unstructured and appear to undergo a conformational change upon ligand binding. Apart from supporting bacterial adherence, FN is also involved in bacterial entry into non-phagocytic mammalian cells. A sandwich model has been proposed in which FN forms a molecular bridge between MSCRAMMs on the bacterial surface and integrins on the host cell. However, the precise mechanism of bacterial invasion and the roles of FN and integrins in this process have yet to be fully elucidated.     

The leucine-rich repeat protein PRELP binds perlecan and collagens and may function as a basement membrane anchor

PRELP (proline arginine-rich end leucine-rich repeat protein) is a heparin-binding leucine-rich repeat protein in connective tissue extracellular matrix. In search of natural ligands and biological functions of this molecule, we found that PRELP binds the basement membrane heparan sulfate proteoglycan perlecan. Also, recombinant perlecan domains I and V carrying heparan sulfate bound PRELP, whereas other domains without glycosaminoglycan substitution did not. Heparin, but not chondroitin sulfate, inhibited the interactions. Glycosaminoglycan-free recombinant perlecan domain V and mutated domain I did not bind PRELP. The dissociation constants of the PRELP-perlecan interactions were in the range of 3-18 nm as determined by surface plasmon resonance. As expected, truncated PRELP, without the heparin-binding domain, did not bind perlecan. Confocal immunohistochemistry showed that PRELP outlines basement membranes with a location adjacent to perlecan. We also found that PRELP binds collagen type I and type II through its leucine-rich repeat domain. Electron microscopy visualized a complex with PRELP binding simultaneously to the triple helical region of procollagen I and the heparan sulfate chains of perlecan. Based on the location of PRELP and its interaction with perlecan heparan sulfate chains and collagen, we propose a function of PRELP as a molecule anchoring basement membranes to the underlying connective tissue.     

A novel gain-of-function mutation of the integrin alpha2 VWFA domain.

Integrin alpha2beta1 is the major receptor for collagens in human tissues, being involved in cell adhesion and the control of collagen and collagenase gene expression. The collagen binding site of alpha2beta1 has been localized to the alpha2 von Willebrand Factor type A (VWFA) domain (A-domain or I-domain) and the residues responsible for the interaction with collagen have been mapped. We report a study of alpha2 VWFA domain in which residue E318, which lies outside the collagen binding site, is mutated to tryptophan, showing that this is a gain-of-function mutation. Recombinant alpha2-E318W VWFA domain showed elevated and specific binding to collagen I compared with the wild-type. Side chain hydrophobicity was important for the gain-of-function as elevated binding was seen with E318I and E318Y, but not with E318R. The E318W mutation had additional effects on VWFA domain properties as alpha2-E318W VWFA domain differed from the wild-type in its cation preferences for ligand binding and in binding to monoclonal antibody JA203, which bound at a site distal to E318. The gain-of-function effect was not restricted to binding to collagen I as alpha2-E318W also showed elevated binding to collagen IV, collagen I C-propeptide, laminin and E-cadherin. Binding to these ligands was inhibited by collagen peptide containing the GFOGER motif, indicating that these bound to the VWFA domain by a similar mechanism to collagen I. These data indicate that residue E318 plays a novel and important role in modulating alpha2 VWFA domain--ligand binding and may be involved in the conformational changes associated with its regulation.     

Evidence for the "dock, lock, and latch" ligand binding mechanism of the staphylococcal microbial surface component recognizing adhesive matrix molecules (MSCRAMM) SdrG

Staphylococcus epidermidis is an opportunistic pathogen and a major cause of foreign body infections. The S. epidermidis fibrinogen (Fg)-binding adhesin SdrG is necessary and sufficient for the attachment of this pathogen to Fg-coated materials. Based largely on structural analyses of the ligand binding domain of SdrG as an apo-protein and in complex with a Fg-like peptide, we proposed that SdrG follows a "dock, lock, and latch" mechanism to bind to Fg. This binding mechanism involves the docking of the ligand in a pocket formed between two SdrG subdomains followed by the movement of a C-terminal extension of one subdomain to cover the ligand and to insert and complement a beta-sheet in a neighboring subdomain. These proposed events result in a greatly stabilized closed conformation of the MSCRAMM-ligand complex. In this report, we describe a biochemical analysis of the proposed conformational changes that SdrG undergoes upon binding to its ligand. We have introduced disulfide bonds into SdrG to stabilize the open and closed forms of the apo-form of the MSCRAMM. We show that the stabilized closed form does not bind to the ligand and that binding can be restored in the presence of reducing agents such as dithiothreitol. We have also used F?rster resonance energy transfer to dynamically show the conformational changes of SdrG upon binding to its ligand. Finally, we have used isothermic calorimetry to determine that hydrophobic interactions between the ligand and the protein are responsible for re-directing the C-terminal extension of the second subdomain required for triggering the beta-strand complementation event.     

Fibromodulin binds collagen type I via Glu-353 and Lys-355 in leucine-rich repeat 11

Fibromodulin belongs to the small leucine-rich repeat proteoglycan family, interacts with collagen type I, and controls collagen fibrillogenesis and assembly. Here, we show that a major fibromodulin-binding site for collagen type I is located in leucine-rich repeat 11 in the C terminus of the leucine-rich repeat domain. We identified Glu-353 and Lys-355 in repeat 11 as essential for binding, and the synthetic peptide RLDGNEIKR, including Glu-353 and Lys-355, inhibits the binding of fibromodulin to collagen in vitro. Fibromodulin and lumican compete for the same binding region on collagen, and fibromodulin can inhibit the binding of lumican to collagen type I. However, the peptide RLDGNEIKR does not inhibit the binding of lumican to collagen, suggesting separate but closely situated fibromodulin- and lumican-binding sites in collagen. The collagen-binding Glu-353 and Lys-355 residues in fibromodulin are exposed on the exterior of the beta-sheet-loop structure of the leucine-rich repeat, which resembles the location of interacting residues in other leucine-rich repeat proteins, e.g. decorin.     

Primary structure of the heparin-binding site of type V collagen

The abilities of collagens, type I, II, III, IV, and V, to bind heparin were examined by heparin-affinity chromatography and binding studies with [35S]heparin. At a physiological pH and ionic strength, only type V collagen bound to heparin. Collagens type I and II showed higher affinities than types III and IV for heparin, but did not bind to a heparin column at a physiological ionic strength. The heparin binding site of type V collagen was located in a 30 kDa CNBr fragment of the alpha 1(V) chain, and the amino acid sequence of this fragment was determined. The 30 kDa fragment contained a cluster of basic amino acid residues, and enzymatic cleavage within this basic domain greatly reduced the heparin-binding activities of the resulting peptides. Thus this basic region is probably the heparin-binding site of type V collagen.     

Endo180 binds to the C-terminal region of type I collagen

Type I collagen is a fibril-forming heterotrimer composed of two alpha1 and one alpha2 chains and plays a crucial role in cell-matrix adhesion and cell differentiation. Through a comprehensive differential display screening of oncogenic ras target genes, we have shown that the alpha1 chain of type I collagen (col1a1) is markedly down-regulated by the ras oncogene through the mitogen-activated protein kinase pathway. Although ras-transformed cells are no longer able to produce and secrete endogenous collagen, they can still adhere to exogenous collagen, suggesting that the cells express a collagen binding factor(s) on the cell surface. When the region of col1a1 encompassing the C-terminal glycine repeat and C-prodomain (amino acids 1000-1453) was affinity-labeled with human placental alkaline phosphatase, the secreted trimeric fusion protein could bind to the surface of Ras-transformed cells. Using biochemical purification followed by matrix-assisted laser desorption/ionization mass spectrometry analysis, we identified this collagen binding factor as Endo180 (uPARAP, CD280), a member of the mannose receptor family. Ectopic expression of Endo180 in CosE5 cells followed by in situ staining and quantitative binding assays confirmed that Endo180 indeed recognizes and binds to placental alkaline phosphatase. The interaction between Endo180 and the C-terminal region of type I collagen appears to play an important role in cell-matrix adhesion.