Standard electromotive force of the H2---AgCl;Ag cell in 30, 40, and 50 mass% dimethyl sulfoxide/water from −20 to 25 °C: pK2 and pH values for a standard “Bicine” buffer solution at subzero temperatures

The establishment of the pH (designated pH*) of a standard buffer solution suitable as a pH reference in 30, 40, and 50 mass% dimethyl sulfoxide (DMSO)/H₂O mixtures at temperatures in the range −20 to 0 °C is reported. The buffer material selected was the ampholyte Bicine (N,N-bis(2-hydroxyethyl)glycine), and the reference standard consists of equal molal quantities of Bicine and its sodium salt. The assignment of pH* values rests on measurements of the emf of cells without liquid junction, Pt;H₂(g, 1 atm) ¦Bicine, Na Bicinate, NaCl ¦AgCl;Ag, and the pH* was derived from a determination of K₂, the equilibrium constant for the dissociation process (Bicine) ^± (Bicinate)⁻ + H⁺. The standard emf in the DMSO/H₂O solvents at subzero temperatures was determined from emf measurements of the cell with solutions of HCl replacing the buffer-chloride mixture.     

Standard electromotive force of the H2-AgCl;Ag cell in 30, 40, and 50 mass% glycerol/water from -20 to 25 degrees C: pK2 and pH values for a standard "mops" buffer in 50 mass% glycerol/water

Data are presented regarding the establishment of the pH (designated pH*) of a standard buffer solution suitable as a pH reference in 50 mass% glycerol/water mixtures at temperatures ranging from -20 to 25 degrees C. The buffer material selected was the ampholyte Mops [(3-N-morpholino)-propane sulfonic acid], and the reference standard consists of equal molal amounts of Mops and its sodium salt. The assignment of pH* values is based on measurements of the electromotive force (emf) of cells without liquid junction of the type: Pt;H2(g, 1 atm) / Mops, Na Mopsate, NaCl / AgCl;Ag and the pH* was derived from a determination of K2, the equilibrium constant for the dissociation process (Mops) +/- in equilibrium with (Mopsate)- + H+. The standard emf of the silver-silver chloride electrode in 30, 40, and 50 mass% glycerol/water mixtures was determined from emf measurements of the cell at subzero temperatures with HCl solutions replacing the buffer-chloride mixtures.     

Acid dissociation constants and pH values for standard “bes” and “tricine” buffer solutions in 30, 40, and 50 mass% dimethyl sulfoxide/water between 25 and −25 °C

Information is given concerning two standard buffer solutions suitable as pH references in 30, 40, and 50 mass% dimethyl sulfoxide (DMSO)/H₂O mixed solvents at subzero temperatures from −20 to 0 °C, with the intention of establishing a pH (designated pH^*) scale. The two buffers selected were the ampholytes N,N-bis(2-hydroxyethyl)-2-aminoethane sulfonic acid (“bes”) and N-tris(hydroxymethyl)methylglycine (“tricine”), and the reference standard consisted of equal molal quantities of the buffer and its respective sodium salt. The assignment of pH^* values was based on measurements of the emf of cells without liquid junction of the type: Pt;H₂(g,1 atm) ¦Bes, Na Besate, NaCl ¦ AgCl;Ag and Pt;H₂(g,1 atm) ¦Tricine, Na Tricinate, NaCl ¦AgCl;Ag and the pH^* was derived from a determination of K₂, the equilibrium constant for the dissociation process (Buffer)^±/ai (Buffer)⁻ + H⁺.     

Acid dissociation constants and pH values for standard "bes" and "tricine" buffer solutions in 30, 40, and 50 mass% dimethyl sulfoxide/water between 25 and -25 degrees C

Information is given concerning two standard buffer solutions suitable as pH references in 30, 40, and 50 mass% dimethyl sulfoxide (DMSO)/H2O mixed solvents at subzero temperatures from -20 to 0 degrees C, with the intention of establishing a pH (designated pH*) scale. The two buffers selected were the ampholytes N,N-bis(2-hydroxyethyl)-2-aminoethane sulfonic acid ("bes") and N-tris(hydroxymethyl)methylglycine ("tricine"), and the reference standard consisted of equal molal quantities of the buffer and its respective sodium salt. The assignment of pH* values was based on measurements of the emf of cells without liquid junction of the type: Pt;H2(g,l atm) /Bes, Na Besate, NaCl / AgCl;Ag and Pt;H2(g,l atm) /Tricine, Na Tricinate, NaCl /AgCl;Ag and the pH* was derived from a determination of K2, the equilibrium constant for the dissociation process (Buffer)+/- in equilibrium with(Buffer)- + H+.     

Algae Permeability to Me2SO from −3 to 23°C

Biphasic transport of water and dimethyl sulfoxide (Me₂SO), a common cryoprotective agent (CPA), in algal cells was induced and measured on a cryoperfusion stage. A two-step experimental protocol provided data for the volumetric response of Chlorococcum (C.) texanum to impermeable and permeable solutes. First, the cells were exposed to a 500-mOsm sucrose solution, causing immediate shrinkage of the cell to a minimum equilibrium volume. Then an isoosmotic 200-mOsm/300-mOsm CPA/sucrose solution was introduced to the cells, resulting in increased cell volume to a new equilibrium state. Experiments were conducted at temperatures between −3 and 23°C. Cell volumes were measured off-line by computer analysis of video images. A network thermodynamic model was fit to the transient volume data to determine permeabilities of C. texanum to water and Me₂SO over the full temperature range, and results were calculated with two numeric methods. Biphasic transport was found to be slower at colder temperatures, with water entering the cell faster than Me₂SO. Experimental results were also compared with data from similar experiments using methanol (MeOH) as the CPA. MeOH influx was calculated to be a magnitude larger than that of water. Additionally, MeOH permeability was at least three orders of magnitude greater than Me₂SO permeability, and the difference in these solute permeabilities increased as temperature decreased.     

Cyrstal structure of a complex of α-cyclodextrin with 2-fluoro-4-nitrophenol · 3H2O

The crystal structure of a complex of α-cyclodextrin (α-CD) with 2-fluoro-4-nitrophenol · 3H₂O has been determined by the X-ray diffraction technique. The complex crystallizes in space group P2₁2₁2₁ with cell dimensions: a = 13.431(3), b = 15.299(4), c = 24.780(5) Å. The structure was solved by direct methods and refined to R = 6.7% for 4483 reflections. The crystal structure is isomorphous to the α-CD-4-nitrophneol · 3H₂O complex. The phenyl group is inside the cavity, so that the O-4 hexagon of the α-CD is distorted in a systematic manner: the longest diagonal [O-4(G2) O-4(G5)] is in the direction of the benzene ring. The phenolic OH group protrudes from the secondary OH side of the cavity and the NO₂ group is situated on the primary OH side. The hydrophobic F atom is statitically disordered over two sites and is located in the hydrophilic space, just beyond the rim of the secondary OH side of the cavity.     

Influence du pH sur la synthèse de l''oxidase (cytochrome a3) chez Bacillus coagulans, microorganisme thermophile, capable d'' “adaptation respiratoire”

In a new series of experiments on Bacillus coagulans (ATCC 11.369), it was demonstrated that this organism possesses a respiratory system with cytochromes b, c₁, c, (a+a₃) and also cytochrome o. A small decrease in the pH of the growth medium from 6.5 to 5.5 increases the respiratory activity by a factor of 4 and induces a variation of the absorption ratio [₆₀₃ (a+a₃)]/[₅₆₀ (b+c)] resulting in a preponderant increase in the ₆₀₃ absorption. The kinetic studies of the respiratory system synthesis during the phenomenon of “respiratory adaptation” have shown that lowering the pH of the adaption medium has the same effect. Spectral studies of membrane fractions (red dithionite) with or without carbon monoxide showed a preferential synthesis of oxidase a₃.     

An X-ray crystallographic study of α-d-allopyranosyl α-d-allopyranoside · CaCl2 · 5H2O (a pentadentate complex)

Three-dimensional, single-crystal, X-ray diffraction methods were used to determine the structure of the calcium chloride complex of α-d-allopyranosyl α-d-allopyranoside. The crystal is monoclinic with cell dimensions: a = 16.262(5), b = 8.345(5), c = 8.298(5)Å, β = 98.428(5)Å, and z = 2. The space group is P2₁. The structure was solved by three-dimensional Patterson and Fourier methods, and was refined by least-squares techniques to give a conventional discrepancy factor of R = 0.026; 2435 diffractometer-read reflections were used. The cation was found to be in 9-fold co-ordination to O-1, O-2, O-3, O-2′, O-3′, and four water molecules.     

Studies of the oxovanadium(IV)—oxalate system: syntheses and crystal structures of binuclear (Ph4P)2[(VO)2(H2O)2(C2O4)3]·4H2O and of the one-dimensional chain material, (Ph4P)[VOCl(C2O4)]

The hydrothermal reactions of (Ph₄P)[VO₂Cl₂] and H₂C₂O₄ at 150 and 125°C yield (Ph₄P)₂[V₂O₂(H₂O)₂(C₂O₄)₃]·4H₂O (1) and (Ph₄P)[VOCl(C₂O₄)] (2), respectively. The structure of the molecular anion of 1 consists of a binuclear unit of oxovanadium(IV) octahedra bridged by a bisbidentate oxalate group. The VO₆ coordination geometry at each vanadium site is defined by a terminal oxo group, an aquo ligand, and four oxygen donors — two from the bisbidentate bridging oxalate and two from the terminal bidentate oxalate. The structure of 2 consists of discrete Ph₄P⁺ cations occupying regions between [VOCl(C₂O₄)]⁻_∞ spiral chains. The structure of the one-dimensional anionic chain exhibits V(IV) octahedra bridged by bisbidentate oxalate groups. Crystal data: 1·4H₂O, monoclinic P2₁/n, A = 12.694(3), B = 12.531(3), C = 17.17(3) Å, β = 106.32(2)°, V = 2621.3(13) ų, Z = 2, D_calc = 1.501 g cm⁻³, structure solution and refinement converged at a conventional residual of 0.0518; 2, tetragonal P4₃, A = 12.145(2), C = 15.991(3) Å, V = 2358.7(12) ų, Z = 4, R = 0.0452.