Hydration and molecular motions in synthetic phytanyl-chained glycolipid vesicle membranes.

Proton permeation rates across membranes of a synthetic branch-chained glycolipid, 1,3-di-O-phytanyl-2-O-(beta-D-maltotriosyl)glycerol (Mal3(Phyt)2) as well as a branch-chained phospholipid, diphytanoylphosphatidylcholine (DPhPC) were lower than those of straight-chained lipids such as egg yolk phosphatidylcholine (EPC) by a factor of approximately 4 at pH 7.0 and 25 degrees C. To examine whether degrees of water penetration and molecular motions in Mal3(Phyt)2 membranes can account for the lower permeability, nanosecond time-resolved fluorescence spectroscopy was applied to various membranes of branch-chained lipids (Mal3(Phyt)2, DPhPC, and a tetraether lipid from an extremely thermoacidophilic archaeon Thermoplasma acidophilum), as well as straight-chained lipids (EPC, 1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC), and digalactosyldiacylglycerol (DGDG)) using several fluorescent lipids. Degrees of hydration of glycolipids, Mal3(Phyt)2, and DGDG were lower than those of phospholipids, EPC, POPC, and DPhPC at the membrane-water interfaces. DPhPC showed the highest hydration among the lipids examined. Meanwhile, rotational and lateral diffusive motions of the fluorescent phospholipid in branch-chained lipid membranes were more restricted than those in straight-chained ones. The results suggest that the restricted motion of chain segments rather than the lower hydration accounts for the lower proton permeability of branch-chained lipid membranes.     

Long Open Amphotericin Channels Revealed in Cholesterol-Containing Phospholipid Membranes Are Blocked by Thiazole Derivative

The action of antifungal drug, amphotericin B (AmB), on solvent-containing planar lipid bilayers made of sterols (cholesterol, ergosterol) and synthetic C14–C18 tail phospholipids (PCs) or egg PC has been investigated in a voltage-clamp mode. Within the range of PCs tested, a similar increase was achieved in the lifetime of one-sided AmB channels in cholesterol- and ergosterol-containing membranes with the C16 tail PC, DPhPC at sterol/DPhPC molar ratio ≤1. The AmB channel lifetimes decreased only at sterol/DPhPC molar ratio >1 that occurred with sterol/PC molar ratio of target cell membranes at a pathological state. These data obtained on bilayer membranes two times thicker than one-sided AmB channel length are consistent with the accepted AmB pore-forming mechanism, which is associated with membrane thinning around AmB–sterol complex in the lipid rafts. Our results show that AmB can create cytotoxic (long open) channels in cholesterol membrane with C14–C16 tail PCs and nontoxic (short open) channels with C17–C18 tail PCs as the lifetime of one-sided AmB channel depends on ~2–5 Å difference in the thickness of sterol-containing C16 and C18 tail PC membranes. The reduction in toxic AmB channels efficacy can be required at the drug administration because C16 tails in native membrane PCs occur almost as often as C18 tails. The comparative analysis of AmB channel blocking by tetraethylammonium chloride, tetramethylammonium chloride and thiazole derivative of vitamin B₁, 3-decyloxycarbonylmethyl-4-methyl-5-(2-hydroxyethyl) thiazole chloride (DMHT), has proved that DMHT is a comparable substitute for both tetraalkylammonia that exhibits a much higher affinity.     

Homogeneous hybrid droplet interface bilayers assembled from binary mixtures of DPhPC phospholipids and PB-b-PEO diblock copolymers

Hybrid membranes built from phospholipids and amphiphilic block copolymers seek to capitalize on the benefits of both constituents for constructing biomimetic interfaces with improved performance. However, hybrid membranes have not been formed or studied using the droplet interface bilayer (DIB) method, an approach that offers advantages for revealing nanoscale changes in membrane structure and mechanics and offers a path toward assembling higher-order tissues. We report on hybrid droplet interface bilayers (hDIBs) formed in hexadecane from binary mixtures of synthetic diphytanoyl phosphatidylcholine (DPhPC) lipids and low molecular weight 1,2 polybutadiene-b-polyethylene oxide (PBPEO) amphiphilic block copolymers and use electrophysiology measurements and imaging to assess the effects of PBPEO in the membrane. This work reveals that hDIBs containing up to 15 mol% PBPEO plus DPhPC are homogeneously mixtures of lipids and polymers, remain highly resistive to ion transport, and are stable—including under applied voltage. Moreover, they exhibit hydrophobic thicknesses similar to DPhPC-only bilayers, but also have significantly lower values of membrane tension. These characteristics coincide with reduced energy of adhesion between droplets and the formation of alamethicin ion channels at significantly lower threshold voltages, demonstrating that even moderate amounts of amphiphilic block copolymers in a lipid bilayer provide a route for tuning the physical properties of a biomimetic membrane.     

Synthetic copoly(Lys/Phe) and poly(Lys) translocate through lipid bilayer membranes

Several membrane-transporting peptides (MTP) containing basic amino acid residues such as Lys and Arg that carry macromolecules such as DNA and proteins across cell plasma membranes by an unknown mechanism have been actively studied. On the basis of these results, we have been investigating the translocation ability of synthetic polypeptides, copoly(Lys/Phe) and poly(Lys), through negatively charged phospholipid (soybean phospholipid (SBPL)) bilayer membranes by zeta potential analysis, circular dichroism (CD) spectroscopy, fluorescence spectroscopy, an electrophysiology technique, and confocal laser scanning microscopy (CLSM). The binding of these polypeptides to the membrane, which is the first step for translocation across the membrane, resulted in the conformational transition of the polypeptide from a random coil form or helix-poor form to a helix-rich form. The fluorescence studies demonstrated that the time-dependent decrease in the fluorescence intensities of the FITC-labeled polypeptides bound to the SBPL liposome reflected translocation of the polypeptide across the lipid bilayer with the low dielectric constant. Both the rate constant and the efficiency of the polypeptide translocation across the lipid bilayer were greater for copoly(Lys/Phe) than for poly(Lys). These results suggest that the random incorporation of the hydrophobic Phe residue into the positively charged Lys chain results in a lowering of the potential barrier for passage of the polypeptide in the hydrophobic core portion of the lipid bilayer. We presented the first direct observation that the positively charged polypeptides, copoly(Lys/Phe) (MW: 41,500) and poly(Lys) (MW: 23,400), could translocate across the lipid bilayer membrane.     

Membrane packing geometry of diphytanoylphosphatidylcholine is highly sensitive to hydration: phospholipid polymorphism induced by molecular rearrangement in the headgroup region.

Diphytanoylphosphatidylcholine (DPhPC) has often been used in the study of protein-lipid interaction and membrane channel activity, because of the general belief that it has high bilayer stability, low ion leakage, and fatty acyl packing comparable to that of phospholipid bilayers in the liquid-crystalline state. In this solid-state 31P and 2H NMR study, we find that the membrane packing geometry and headgroup orientation of DPhPC are highly sensitive to the temperature studied and its water content. The phosphocholine headgroup of DPhPC starts to change its orientation at a water content as high as approximately 16 water molecules per lipid, as evidenced by hydration-dependent 2H NMR study at room temperature. In addition, a temperature-induced structural transition in the headgroup orientation is detected in the temperature range of approximately 20-60 degrees C for lipids with approximately 8-11 water molecules per DPhPC. Dehydration of the lipid by one more water molecule leads to a nonlamellar, presumably cubic, phase formation. The lipid packing becomes a hexagonal phase at approximately 6 water molecules per lipid. A phase diagram of DPhPC in the temperature range of -40 degrees C to 80 degrees C is thus constructed on the basis of NMR results. The newly observed hydration-dependent DPhPC lipid polymorphism emphasizes the importance of molecular packing in the headgroup region in modulating membrane structure and protein-induced pore formation of the DPhPC bilayer.     

Synthetic copoly(Lys/Phe) and poly(Lys) translocate through lipid bilayer membranes

Several membrane-transporting peptides (MTP) containing basic amino acid residues such as Lys and Arg that carry macromolecules such as DNA and proteins across cell plasma membranes by an unknown mechanism have been actively studied. On the basis of these results, we have been investigating the translocation ability of synthetic polypeptides, copoly(Lys/Phe) and poly(Lys), through negatively charged phospholipid (soybean phospholipid (SBPL)) bilayer membranes by zeta potential analysis, circular dichroism (CD) spectroscopy, fluorescence spectroscopy, an electrophysiology technique, and confocal laser scanning microscopy (CLSM). The binding of these polypeptides to the membrane, which is the first step for translocation across the membrane, resulted in the conformational transition of the polypeptide from a random coil form or helix-poor form to a helix-rich form. The fluorescence studies demonstrated that the time-dependent decrease in the fluorescence intensities of the FITC-labeled polypeptides bound to the SBPL liposome reflected translocation of the polypeptide across the lipid bilayer with the low dielectric constant. Both the rate constant and the efficiency of the polypeptide translocation across the lipid bilayer were greater for copoly(Lys/Phe) than for poly(Lys). These results suggest that the random incorporation of the hydrophobic Phe residue into the positively charged Lys chain results in a lowering of the potential barrier for passage of the polypeptide in the hydrophobic core portion of the lipid bilayer. We presented the first direct observation that the positively charged polypeptides, copoly(Lys/Phe) (MW: 41,500) and poly(Lys) (MW: 23,400), could translocate across the lipid bilayer membrane.     

Interaction of saponin and digitonin with black lipid membranes and lipid monolayers

The effects of the plant glycosides saponin as well as digitonin on the electrical conductance of black lipid membranes and the effect of these agents on the surface pressure of lipid monofilms was investigated. Both saponin and digitonin induced channel-like fluctuations in planar bilayers made either of diphytanoylphosphatidylcholine ( DPhPC ) or of DPhPC and cholesterol 2: 1 (w/w). In cholesterol-free bilayers the amount needed to induce an increase in conductance was 0.3-1 mg/ml for saponin and about 0.2 mg/ml for digitonin. In contrast, in cholesterol-containing bilayers the concentration needed to induce pores was about 10 micrograms/ml for both saponin and digitonin. In cholesterol-containing membranes the fluctuating pores induced by saponin were about 3-times more permeable to K+ than to Cl- and the macroscopic current showed an ohmic behaviour. Surface pressure experiments demonstrate that both glycosides could penetrate into lipid monofilms of pure DPhPC spread at the air/water interface with an initial surface pressure of 30 mN/m. The increase in surface pressure was considerably enhanced in cholesterol-containing films. It is assumed that the channel-like fluctuations induced by saponin as well as digitonin, in both cholesterol-free and cholesterol-rich bilayers are due to the formation of micellar structures within the lipid lattice. Probably the penetration of the glycosides into the lipid bilayer is considerably enhanced by the presence of cholesterol.     

Specific interactions of tryptophan with phosphatidylcholine and digalactosyldiacylglycerol in pure and mixed bilayers in the dry and hydrated state

Amphiphilic solutes play an important role in the desiccation tolerance of plant cells, because they can reversibly partition into cellular membranes during dehydration. Their effects on membrane stability depend on their chemical structure, but also on the lipid composition of the host membrane. We have shown recently that tryptophan destabilizes liposomes during freezing. The degree of destabilization depends on the presence of glycolipids in the membranes, but not on the phase preference (bilayer or non-bilayer) of the lipids in mixtures with the bilayer lipid phosphatidylcholine. Here, we have investigated the influence of tryptophan on the phase behavior and intermolecular interactions in dry and hydrated bilayers made from the phospholipid egg phosphatidylcholine and the plant chloroplast glycolipid digalactosyldiacylglycerol, or from a mixture (1:1) of these lipids, using Fourier-transform infrared spectroscopy. To distinguish effects of the hydrophobic ring structure of tryptophan from those of the amino acid moiety, we also performed experiments with the hydrophilic amino acid glycine. Our data show that there are specific interactions between tryptophan and either phospholipid or glycolipid in the dry state, as well as H-bonding interactions between the lipids and both solutes. In the rehydrated state, the H-bonding interactions between amino acids and lipids are mostly replaced by interactions between water and lipids, while the hydrophobic interactions between lipids and tryptophan mostly persist.     

Interaction of all-<Emphasis Type="Italic">trans</Emphasis>-Retinal with bilayer lipid membranes

The interaction of all-trans-retinal (hereinafter referred to as retinal) with planar bilayer lipid membranes has been studied. Addition of retinal into aqueous solutions on both sides of the membrane formed from diphytanoilphosphatidylcholine (DPhPC) or its mixture with diphytanoilphosphatidylethanolamine (DPhPC/DPhPE in w/w proportion of 3: 5) led to a change of conductance induced by ionophores nonactin (increase of conductance) or pentachlorophenol (decrease). Increase of nonactin-induced conductance was dependent on the membrane lipid composition and was two times higher in the case of DPhPC/DPhPE mixture. The change of conductance caused by ionophores of different signs (plus or minus) had different direction suggesting the influence of the retinal on the dipole potential upon its incorporation into BLM. The boundary potentials difference measured by the intramembrane field compensation method (IFC) after the retinal addition on one side of the membrane did not exceed 2.5 mV suggesting that its distribution in the bilayer is almost symmetrical. The illumination of the retinal-containing BLM caused a decrease in its lifetime when the membranes were formed from unsaturated lipids. Retinal incorporated into BLM led also to photoinactivation of the gramicidin channels. The process was completely inhibited by a singlet oxygen quencher (sodium azide). These results indicate that retinal accumulated in the membrane can affect both membrane proteins and the unsaturated lipids by their oxidation by the singlet oxygen.     

Non-vesicular transfer of membrane proteins from nanoparticles to lipid bilayers

Discoidal lipoproteins are a novel class of nanoparticles for studying membrane proteins (MPs) in a soluble, native lipid environment, using assays that have not been traditionally applied to transmembrane proteins. Here, we report the successful delivery of an ion channel from these particles, called nanoscale apolipoprotein-bound bilayers (NABBs), to a distinct, continuous lipid bilayer that will allow both ensemble assays, made possible by the soluble NABB platform, and single-molecule assays, to be performed from the same biochemical preparation. We optimized the incorporation and verified the homogeneity of NABBs containing a prototypical potassium channel, KcsA. We also evaluated the transfer of KcsA from the NABBs to lipid bilayers using single-channel electrophysiology and found that the functional properties of the channel remained intact. NABBs containing KcsA were stable, homogeneous, and able to spontaneously deliver the channel to black lipid membranes without measurably affecting the electrical properties of the bilayer. Our results are the first to demonstrate the transfer of a MP from NABBs to a different lipid bilayer without involving vesicle fusion.     

The interaction of dipole modifiers with amphotericin-ergosterol complexes. Effects of phospholipid and sphingolipid membrane composition

The influence of agents, known to affect the membrane dipole potential, phloretin and RH 421, on the multi channel activity of amphotericin B in lipid bilayers of various compositions, was studied. It was shown that the effects were dependent on the membrane’s phospholipid and sphingolipid type. Phloretin enhanced amphotericin B induced steady-state transmembrane current through bilayers made from binary mixtures of POPC (DOPC) and ergosterol and ternary mixture of DPhPC, ergosterol and stearoylphytosphingosine. RH 421 increased steady-state polyene induced transmembrane current through membranes made from binary mixtures of DPhPC (DPhPS) and ergosterol and ternary mixture of DPhPS, ergosterol and stearoylphytosphingosine. It was proposed that the observed effects reflect the fine balance of the interactions between the various components present: amphotericin B, ergosterol, phospholipid, sphingolipid and dipole modifier. The shape of lipid molecules seems to be an important factor impacting the responses of amphotericin B modified bilayers to dipole modifiers. The influence of different phospholipids and sphingolipids on the physical and structural properties of ordered lipid microdomains, enriched in AmB, was also discussed. It was also shown that RH 421 enhanced the antifungal activity of amphotericin B in vitro.     

Model membranes bearing glycolipids and glycoproteins

The forces that hold cell membrane components together are non-covalent and thermodynamically favoured in aqueous media. Hence virtually any glycolipid or membrane glycoprotein might be expected to be incorporable into lipid bilayer membranes and this expectation has been borne out. In addition methods have been developed for linking lipid fragments to species that would not otherwise be expected to associate with bilayers. Techniques that have been successfully used to generate bilayer structures bearing glycolipids and glycoproteins include hydration of films dried down from non-aqueous solutions of the components, detergent removal from aqueous component solutions, exogenous addition to preformed membranes, and various organic solvent injection or reverse phase approaches. Bilayer association of glycolipids and membrane glycoproteins, with preservation of specific receptor function, seem easy to achieve — in fact difficult not to achieve. Optimization of receptor function to accurately mimic that of cell membranes and efficient preservation of functions such as transport or second messenger activation, are typically more demanding, although still feasible. A systematic approach can give considerable insight into the processes involved via identification of minimal necessary factors. Unfortunately, the actual relative arrangement of components, so critical to subtleties of glycolipid and glycoprotein function, remains almost totally unknown for lack of morphological information in the size range of individual macromolecules. The latter problem has come to be the most critical limitation to many studies.     

Mechanism of proton permeation through chloroplast lipid membranes.

Electrical measurements were carried out to investigate the contribution of chloroplast lipids to the passive proton permeability of both the thylakoid and inner-envelope membranes. Permeability coefficient and conductance to protons were measured for solvent-free bilayers made from monogalactosyldiglyceride:digalactosyldiglycerid: sulfoquinovosyldiglyceride:phosphatidylglycerol (2:1:0.5:0.5, w/w) in the presence of a pH gradient of 7.4/8.1. The permeability coefficient for protons in glycolipids was 5.5 +/- 1.1 x 10(-4) cm s-1 (n = 14). To determine whether this high H+ permeability could be explained by the presence of lipid contaminants such as weak acids, we investigated the effects of (a) bovine serum albumin, which can remove some amphiphilic molecules such as free fatty acids, (b) 6-ketocholestanol, which increases the membrane dipole potential, (c) oleic acid, and (d) chlorodecane, which increases the dielectric constant of the lipid bilayer. Our results show that free fatty acids are inefficient protonophores, as compared with carbonylcyanide-m-chlorphenythydrazone, and that the hypothesis of a weak acid mechanism is not valid with glycolipid bilayers. In the presence of deuterium oxide the H+ conductane was reduced significantly, indicating that proton transport through the glycolipid matrix could occur directly by a hydrogen bond process. The passive transport of H+ through the glycolipid matrix is discussed with regard to the activity of the thylakoid ATP synthase and the inner-envelope H(+)-ATPase.     

On measurements of the higher harmonics of transmembrane current

The higher harmonics of the current caused by an alternating voltage applied to bilayer lipid membranes made of diphytanoyl phosphatidylcholine (DPhPC) in decane and tetradecane were measured. A universal relation between the amplitudes of harmonics was proposed and experimentally verified. This allowed the coefficients of expansion of the capacitance in even powers of voltage to be calculated for the DPhPC membrane in tetradecane; it also permitted comparison of the inhomogeneity in the thickness of the DPhPC membranes in decane and tetradecane.     

Synthetic phytanyl-chained glycolipid vesicle membrane as a novel matrix for functional reconstitution of cyanobacterial photosystem II complex

The vesicles composed of synthetic phytanyl-chained glycolipid and natural sulfoquinovosyldiacylglycerol at 9:1 molar ratio were successfully applied to functional reconstitution of photosystem II complex (PS II) from a thermophilic cyanobacterium. The synthetic glycolipid employed was one of our model archaeal diether lipids, 1, 3-di-O-phytanyl-2-O-(beta-D-maltotriosyl)glycerol. The light-induced oxygen-evolving activity of PS II reconstituted in the glycolipid vesicles was approximately 6-fold higher than that reconstituted in several phosphatidylcholine vesicles. The present results reveal the first evidence that a well-designed synthetic glycolipid is effective for the functional reconstitution of complicated and labile membrane protein complexes, such as PS II.     

Apolipoproteins L1-6 share key cation channel-regulating residues but have different membrane insertion and ion conductance properties

The human apolipoprotein L gene family encodes the apolipoprotein L1–6 (APOL1–6) proteins, which are effectors of the innate immune response to viruses, bacteria and protozoan parasites. Due to a high degree of similarity between APOL proteins, it is often assumed that they have similar functions to APOL1, which forms cation channels in planar lipid bilayers and membranes resulting in cytolytic activity. However, the channel properties of the remaining APOL proteins have not been reported. Here, we used transient overexpression and a planar lipid bilayer system to study the function of APOL proteins. By measuring lactate dehydrogenase release, we found that APOL1, APOL3, and APOL6 were cytolytic, whereas APOL2, APOL4, and APOL5 were not. Cells expressing APOL1 or APOL3, but not APOL6, developed a distinctive swollen morphology. In planar lipid bilayers, recombinant APOL1 and APOL2 required an acidic environment for the insertion of each protein into the membrane bilayer to form an ion conductance channel. In contrast, recombinant APOL3, APOL4, and APOL5 readily inserted into bilayers to form ion conductance at neutral pH, but required a positive voltage on the side of insertion. Despite these differences in membrane insertion properties, the ion conductances formed by APOL1-4 were similarly pH-dependent and cation-selective, consistent with conservation of the pore-lining region in each protein. Thus, despite structural conservation, the APOL proteins are functionally different. We propose that these proteins interact with different membranes and under different voltage and pH conditions within a cell to effect innate immunity to different microbial pathogens.     

Differential scanning calorimetry and (2)H nuclear magnetic resonance and Fourier transform infrared spectroscopy studies of the effects of transmembrane alpha-helical peptides on the organization of phosphatidylcholine bilayers

We have studied the effects of the incorporation of the alpha-helical transmembrane peptides Ac-K(2)-L(24)-K(2)-amide (L(24)) and Ac-K(2)-(L-A)(12)-K(2)-amide ((LA)(12)) on the thermotropic phase behavior of 1,2-dipalmitoyl-d(62)-sn-glycero-3-phosphocholine (DPPC-d(62)) and 1-palmitoyl-d(31)-2-oleoyl-sn-glycero-3-phosphocholine (POPC-d(31)) lipid bilayer model membranes by differential scanning calorimetry (DSC) and the conformational and orientational order of the phospholipid chains by Fourier transform infrared (FTIR) spectroscopy and (2)H nuclear magnetic resonance ((2)H-NMR) spectroscopy, respectively. Our DSC and FTIR spectroscopic studies indicate that the peptides L(24) and (LA)(12) both decrease the temperature and enthalpy of the gel/liquid-crystalline phase transition of DPPC-d(62) bilayers, with (LA)(12) having the greater effect in this regard. An examination of the frequencies of the CH(2) and CD(2) symmetric stretching bands of the infrared spectra of liquid-crystalline states of the peptide-free and peptide-containing DPPC-d(62) and POPC-d(31) samples, and a comparison with the orientational order as measured by (2)H-NMR spectroscopy as well as with the chain order as measured by electron spin resonance spectroscopy, lead us to conclude that the CH(2) (or CD(2)) stretching frequencies of lipid hydrocarbon chains are not a reliable measure of chain conformational order in lipid bilayers containing significant amounts of peptides or other lipophilic inclusions. In contrast, the results of our (2)H-NMR spectroscopic studies present a consistent picture in which both L(24) and (LA)(12) increased in a similar way the time-averaged orientational order of the lipid chains of their liquid-crystalline lipid bilayer hosts. The comparison of the effects L(24) and (LA)(12) on phosphatidylcholine bilayers indicates that the gel-to-liquid-crystalline phase transition appears to be more sensitive to small changes in transmembrane peptide surface topology than hydrocarbon carbon chain orientational order in the liquid-crystalline state.     

Activating and deactivating roles of lipid bilayers on the Ca(2+)-ATPase/phospholamban complex

The physicochemical properties of the lipid bilayer shape the structure and topology of membrane proteins and regulate their biological function. Here, we investigated the functional effects of various lipid bilayer compositions on the sarcoplasmic reticulum (SR) Ca(2+)-ATPase (SERCA) in the presence and absence of its endogenous regulator, phospholamban (PLN). In the cardiac muscle, SERCA hydrolyzes one ATP molecule to translocate two Ca(2+) ions into the SR membrane per enzymatic cycle. Unphosphorylated PLN reduces SERCA's affinity for Ca(2+) and affects the enzymatic turnover. We varied bilayer thickness, headgroup, and fluidity and found that both the maximal velocity (V(max)) of the enzyme and its apparent affinity for Ca(2+) (K(Ca)) are strongly affected. Our results show that (a) SERCA's V(max) has a biphasic dependence on bilayer thickness, reaching maximum activity with 22-carbon lipid chain length, (b) phosphatidylethanolamine (PE) and phosphatidylserine (PS) increase Ca(2+) affinity, and (c) monounsaturated lipids afford higher SERCA V(max) and Ca(2+) affinity than diunsaturated lipids. The presence of PLN removes the activating effect of PE and shifts SERCA's activity profile, with a maximal activity reached in bilayers with 20-carbon lipid chain length. Our results in synthetic lipid systems compare well with those carried out in native SR lipids. Importantly, we found that specific membrane compositions closely reproduce PLN effects (V(max) and K(Ca)) found in living cells, reconciling an ongoing controversy regarding the regulatory role of PLN on SERCA function. Taken with the physiological changes occurring in the SR membrane composition, these studies underscore a possible allosteric role of the lipid bilayers on the SERCA/PLN complex.     

Lipid Clustering Correlates with Membrane Curvature as Revealed by Molecular Simulations of Complex Lipid Bilayers

Cell membranes are complex multicomponent systems, which are highly heterogeneous in the lipid distribution and composition. To date, most molecular simulations have focussed on relatively simple lipid compositions, helping to inform our understanding of in vitro experimental studies. Here we describe on simulations of complex asymmetric plasma membrane model, which contains seven different lipids species including the glycolipid GM3 in the outer leaflet and the anionic lipid, phosphatidylinositol 4,5-bisphophate (PIP₂), in the inner leaflet. Plasma membrane models consisting of 1500 lipids and resembling the in vivo composition were constructed and simulations were run for 5 µs. In these simulations the most striking feature was the formation of nano-clusters of GM3 within the outer leaflet. In simulations of protein interactions within a plasma membrane model, GM3, PIP₂, and cholesterol all formed favorable interactions with the model α-helical protein. A larger scale simulation of a model plasma membrane containing 6000 lipid molecules revealed correlations between curvature of the bilayer surface and clustering of lipid molecules. In particular, the concave (when viewed from the extracellular side) regions of the bilayer surface were locally enriched in GM3. In summary, these simulations explore the nanoscale dynamics of model bilayers which mimic the in vivo lipid composition of mammalian plasma membranes, revealing emergent nanoscale membrane organization which may be coupled both to fluctuations in local membrane geometry and to interactions with proteins.     

bSUM: A bead-supported unilamellar membrane system facilitating unidirectional insertion of membrane proteins into giant vesicles

Fused or giant vesicles, planar lipid bilayers, a droplet membrane system, and planar-supported membranes have been developed to incorporate membrane proteins for the electrical and biophysical analysis of such proteins or the bilayer properties. However, it remains difficult to incorporate membrane proteins, including ion channels, into reconstituted membrane systems that allow easy control of operational dimensions, incorporation orientation of the membrane proteins, and lipid composition of membranes. Here, using a newly developed chemical engineering procedure, we report on a bead-supported unilamellar membrane (bSUM) system that allows good control over membrane dimension, protein orientation, and lipid composition. Our new system uses specific ligands to facilitate the unidirectional incorporation of membrane proteins into lipid bilayers. Cryo–electron microscopic imaging demonstrates the unilamellar nature of the bSUMs. Electrical recordings from voltage-gated ion channels in bSUMs of varying diameters demonstrate the versatility of the new system. Using KvAP as a model system, we show that compared with other in vitro membrane systems, the bSUMs have the following advantages: (a) a major fraction of channels are orientated in a controlled way; (b) the channels mediate the formation of the lipid bilayer; (c) there is one and only one bilayer membrane on each bead; (d) the lipid composition can be controlled and the bSUM size is also under experimental control over a range of 0.2–20 µm; (e) the channel activity can be recorded by patch clamp using a planar electrode; and (f) the voltage-clamp speed (0.2–0.5 ms) of the bSUM on a planar electrode is fast, making it suitable to study ion channels with fast gating kinetics. Our observations suggest that the chemically engineered bSUMs afford a novel platform for studying lipid–protein interactions in membranes of varying lipid composition and may be useful for other applications, such as targeted delivery and single-molecule imaging.