An Anti-microbial Peptide Derivative of Flesh Fruit Fly Mimics Secretory Signal Sequence and Inhibits Signal Peptidase-I in the Export Pathway

Combinatorial search of the antimicrobial peptide R⁷SLCLLHCRLK from flesh fruit fly yielded a substantially more active peptide of the sequence KLKL₅KLK-NH₂ that had signal sequence character as revealed by Neural-network survey. Bioinformatics survey of KLKL_nKLK revealed a sigmoidal relationship between SSP and the intervening Leu stretch. Synthetic enantiomeric KLKL_nKLK peptides inhibited Escherichia coli signal peptidase-I, in vitro, in correlation with their SSPs; KLKL₆₍₇₎KLK exterted maximum inhibition. Both (l)-and (d)-forms were bactericidal to Gram-positive and Gram-negative bacteria. However, the protease-resistant (d)-KLKL₆KLK-NH₂ proved more potent than (d)-KLKL₆KLK-NH₂ at inhibiting the bacterial protein secretion prior to inducing bacterial lysis. Kinetic analyses of the interaction of these peptides with the signal peptidase-I revealed competitive inhibition with K_i of 10 μM and 35 μM for the (d)- and (l)-forms, respectively. The left and right-handed helicity of the respective peptides assessed by CD concurs with their probable interaction at the active site of signal peptidase-I. Tasawar Khan is deceased.     

Characterization and validation of a chemiluminescent assay based on 1,2-dioxetanes for rapid detection of viable Escherichia coli

[(4-methoxy-4(3-β-d-galactose-4-chlorophenyl)]spiro[1,2-dioxetane-3-1,3-tricyclo[7.3.1.0^2,7]tridec-2,7-ene] (“sβ-Gal 102”) and sodium [4-methoxy-4(3-β-d-glucuronic acid-4-chlorophenyl)]spiro[1,2-dioxetane-3-1,3-tricyclo[7.3.1.0^2,7]tridec-2,7-ene] (“sβ-Glucor 102”) are carbohydrate-containing 1,2-dioxetane compounds that produce chemiluminescence upon enzymatic hydrolysis by β-d-galactosidase, and β-d-glucuronidase, respectively. In this study, we have characterized and validated a sensitive detection principle for viable Escherichia coli based on enzymatic cleavage of sβ-Gal 102 and sβ-Glucor 102 (“ColiLight II”). The proposed chemiluminescent assay was optimized with respect to analytical requirements including incubation time, temperature, pH, enzyme induction, and cell permeabilization. The sensitivity and specificity rates of the assay were tested on ten different bacterial genera. The assay was found to be representative based on low coefficients of variations for both accuracy and precision. The analysis time was less than 1 h and the analytical detection limit was 10² to 10³ E. coli cells. In combination with membrane filtration and a brief resuscitation step of 4 h, the proposed assay was capable of detecting low concentrations of stressed E. coli in potable water (<30 CFU 100 ml⁻¹). The proposed chemiluminescent enzyme assay may be used for assessing the metabolic activity of E. coli in oligotrophic environments and for early warning detection of low concentrations of E. coli in water for human consumption.     

Construction of an engineered yeast with glucose-inducible emission of green fluorescence from the cell surface

An engineered yeast with emission of fluorescence from the cell surface was constructed. Cell surface engineering was applied to display a visible reporter molecule, green fluorescent protein (GFP). A glucose-inducible promoter GAPDH as a model promoter was selected to control the expression of the reporter gene in response to environmental changes. The GFP gene was fused with the gene encoding the C-terminal half of α-agglutinin of Saccharomyces cerevisiae having a glycosylphosphatidylinositol anchor attachment signal sequence. A secretion signal sequence of the fungal glucoamylase precursor protein was connected to the N-terminal of GFP. This designed gene was integrated into the TRP1 locus of the chromosome of S. cerevisiae with homologous recombination. Fluorescence microscopy demonstrated that the transformant cells emitted green fluorescence derived from functionally expressed GFP involved in the fusion molecule. The surface display of GFP was further verified by immunofluorescence labeling with a polyclonal antibody (raised in rabbits) against GFP as the first antibody and Rhodamine Red-X-conjugated goat anti-rabbit IgG as the second antibody which cannot penetrate into the cell membrane. The display of GFP on the cell surface was confirmed using a confocal laser scanning microscope and by measuring fluorescence in each cell fraction obtained after the subcellular fractionation. As GFP was proved to be displayed as an active form on the cell surface, selection of promoters will endow yeast cells with abilities to respond to changes in environmental conditions, including nutrient concentrations in the media, through the emission of fluorescence. Received: 23 August 1999 / Received revision: 16 November 1999 / Accepted: 29 November 1999     

A physical model for PDZ-domain/peptide interactions

The PDZ domain is an interaction motif that recognizes and binds the C-terminal peptides of target proteins. PDZ domains are ubiquitous in nature and help assemble multiprotein complexes that control cellular organization and signaling cascades. We present an optimized energy function to predict the binding free energy (ΔΔG) of PDZ domain/peptide interactions computationally. Geometry-optimized models of PDZ domain/peptide interfaces were built using Rosetta, and protein and peptide side chain and backbone degrees of freedom are minimized simultaneously. Using leave-one-out cross-validation, Rosetta’s energy function is adjusted to reproduce experimentally determined ΔΔG values with a correlation coefficient of 0.66 and a standard deviation of 0.79 kcal mol⁻¹. The energy function places an increased weight on hydrogen bonding interactions when compared to a previously developed method to analyze protein/protein interactions. Binding free enthalpies (ΔΔH) and entropies (ΔS) are predicted with reduced accuracies of R = 0.60 and R = 0.17, respectively. The computational method improves prediction of PDZ domain specificity from sequence and allows design of novel PDZ domain/peptide interactions.     

A family GH51 α-<Emphasis Type="SmallCaps">l</Emphasis>-arabinofuranosidase from <Emphasis Type="BoldItalic">Pleurotus ostreatus</Emphasis>: identification,recombinant expression and characterization

An α-l-arabinofuranosidase produced by Pleurotus ostreatus (PoAbf) during solid state fermentation on tomato pomace was identified and the corresponding gene and cDNA were cloned and sequenced. Molecular analysis showed that the poabf gene carries 26 exons interrupted by 25 introns and has an open reading frame encoding a protein of 646 amino acid residues, including a signal peptide of 20 amino acid residues. The amino acid sequence similar to the other α-l-arabinofuranosidases indicated that the enzyme encoded by poabf can be classified as a family 51 glycoside hydrolase. Heterologous recombinant expression of PoAbf was carried out in the yeasts Pichia pastoris and Kluyveromyces lactis achieving the highest production level of the secreted enzyme (180 mg L⁻¹) in the former host. rPoAbf produced in P. pastoris was purified and characterized. It is a glycosylated monomer with a molecular weight of 81,500 Da in denaturing conditions. Mass spectral analyses led to the localization of a single O-glycosylation site at the level of Ser160. The enzyme is highly specific for α-l-arabinofuranosyl linkages and when assayed with p-nitrophenyl α-l-arabinofuranoside it follows Michaelis–Menten kinetics with a K _M of 0.64 mM and a k _cat of 3,010 min⁻¹. The optimum pH is 5 and the optimal temperature 40°C. It is worth noting that the enzyme shows a very high stability in a broad range of pH. The more durable activity showed by rPoAbf in comparison to the other α-l-arabinofuranosidases enhances its potential for biotechnological applications and increases interest in elucidating the molecular bases of its peculiar properties.     

High-level expression of a truncated 1,3-1,4-β-<Emphasis Type="SmallCaps">d</Emphasis>-glucanase from <Emphasis Type="Italic">Fibrobacter succinogenes</Emphasis> in <Emphasis Type="Italic">Pichia pastoris</Emphasis> by optimization of codons and fermentation

1,3-1,4-β-d-glucanase is an important endoglycosidase in the brewing and animal feed industries. To achieve high-level expression of recombinant glucanase in Pichia pastoris, we designed sequences encoding the α-factor signal peptide from Saccharomyces cerevisiae and the truncated 1,3-1,4-β-d-glucanase from Fibrobacter succinogenes as a whole. The codons encoding the 52 amino acids of the signal peptide and 106 residues of the glucanase protein were optimized for expression in P. pastoris; 189 nucleotides were changed. The G + C content was adjusted to 48–49%, and AT-rich stretches were eliminated to avoid premature termination. The messenger ribonucleic acid secondary structure near the AUG start codon was also adjusted to ensure efficient translation; the resulting glucanase production was twofold higher compared with that achieved with gene structure optimization alone. We also propose a new fermentation strategy for the induction phase, in which 5/95% glycerol/methanol mixed feed was used in days 1–3 and 100% methanol was used on days 4–6. By comparison with methanol feed and glycerol/methanol-mixed feed alone, the yield of recombinant glucanase increased by 38.5 and 16.5%, respectively. The expressed optimized recombinant 1,3-1,4-β-d-glucanase constituted ~90% of the total secreted protein, reaching up to 3 g l⁻¹ in the medium.     

Vacuolar Chloride Transport in Mesembryanthemum crystallinum L. Measured Using the Fluorescent Dye Lucigenin

To study vacuolar chloride (Cl⁻) transport in the halophilic plant Mesembryanthemum crystallinum L., Cl⁻ uptake into isolated tonoplast vesicles was measured using the Cl⁻-sensitive fluorescent dye lucigenin (N,N′-dimethyl-9,9′-bisacridinium dinitrate). Lucigenin was used at excitation and emission wavelengths of 433 nm and 506 nm, respectively, and showed a high sensitivity towards Cl⁻, with a Stern-Volmer constant of 173 m ⁻¹ in standard assay buffer. While lucigenin fluorescence was strongly quenched by all halides, it was only weakly quenched, if at all, by other anions. However, the fluorescence intensity and Cl⁻-sensitivity of lucigenin was shown to be strongly affected by alkaline pH and was dependent on the conjugate base used as the buffering ion. Chloride transport into tonoplast vesicles of M. crystallinum loaded with 10 mm lucigenin showed saturation-type kinetics with an apparent K _m of 17.2 mm and a V _max of 4.8 mm min⁻¹. Vacuolar Cl⁻ transport was not affected by sulfate, malate, or nitrate. In the presence of 250 μm p-chloromercuribenzene sulfonate, a known anion-transport inhibitor, vacuolar Cl⁻ transport was actually significantly increased by 24%. To determine absolute fluxes of Cl⁻ using this method, the average surface to volume ratio of the tonoplast vesicles was measured by electron microscopy to be 1.13 × 10⁷ m⁻¹. After correcting for a 4.4-fold lower apparent Stern-Volmer constant for intravesicular lucigenin, a maximum rate of Cl⁻ transport of 31 nmol m⁻² sec⁻¹ was calculated, in good agreement with values obtained for the plant vacuolar membrane using other techniques. Received: 18 February 2000/Revised: 30 June 2000     

Characterization of Candida sp. NY7122, a novel pentose-fermenting soil yeast

Yeasts that ferment both hexose and pentose are important for cost-effective ethanol production. We found that the soil yeast strain NY7122 isolated from a blueberry field in Tsukuba (East Japan) could ferment both hexose and pentose (d-xylose and l-arabinose). NY7122 was closely related to Candida subhashii on the basis of the results of molecular identification using the sequence in the D1/D2 domains of 26S rDNA and 5.8S-internal transcribed spacer region. NY7122 produced at least 7.40 and 3.86 g l⁻¹ ethanol from 20 g l⁻¹ d-xylose and l-arabinose within 24 h. NY7122 could produce ethanol from pentose and hexose sugars at 37°C. The highest ethanol productivity of NY7122 was achieved under a low pH condition (pH 3.5). Fermentation of mixed sugars (50 g l⁻¹ glucose, 20 g l⁻¹ d-xylose, and 10 g l⁻¹ l-arabinose) resulted in a maximum ethanol concentration of 27.3 g l⁻¹ for the NY7122 strain versus 25.1 g l⁻¹ for Scheffersomyces stipitis. This is the first study to report that Candida sp. NY7122 from a soil environment could produce ethanol from both d-xylose and l-arabinose.     

Biotechnological production of <Emphasis Type="SmallCaps">l</Emphasis>-ribose from <Emphasis Type="SmallCaps">l</Emphasis>-arabinose

l-Ribose is a rare and expensive sugar that can be used as a precursor for the production of l-nucleoside analogues, which are used as antiviral drugs. In this work, we describe a novel way of producing l-ribose from the readily available raw material l-arabinose. This was achieved by introducing l-ribose isomerase activity into l-ribulokinase-deficient Escherichia coli UP1110 and Lactobacillus plantarum BPT197 strains. The process for l-ribose production by resting cells was investigated. The initial l-ribose production rates at 39°C and pH 8 were 0.46 ± 0.01 g g⁻¹ h⁻¹ (1.84 ± 0.03 g l⁻¹ h⁻¹) and 0.27 ± 0.01 g g⁻¹ h⁻¹ (1.91 ± 0.1 g l⁻¹ h⁻¹) for E. coli and for L. plantarum, respectively. Conversions were around 20% at their highest in the experiments. Also partially purified protein precipitates having both l-arabinose isomerase and l-ribose isomerase activity were successfully used for converting l-arabinose to l-ribose.     

Cloning, characterization, and antifungal activity of an endo-1,3-β-d-glucanase from Streptomyces sp. S27

An endo-1,3-β-d-glucanase gene, designated as bglS27, was cloned from Streptomyces sp. S27 and successfully expressed in Escherichia coli BL21 (DE3). The full-length gene contains 1,362 bp and encodes a protein of 453 amino acids with a calculated molecular mass of 42.7 kDa. The encoded protein comprises a catalytic module of glycosyl hydrolase family 16, a short glycine linker region, and a family 13 carbohydrate-binding module. The purified recombinant enzyme (BglS27) showed optimal activity at 65°C and pH 5.5 and preferentially catalyzed the hydrolysis of glucans with a β-1,3-linkage using an endolytic mode of action. The specific activity and K _m value of BglS27 for laminarin were 236.0 U mg^–1 and 1.89 mg ml^–1, respectively. In antifungal assay, BglS27 had the ability to inhibit the growth of phytopathogenic fungi Rhizoctonic solani and Fusarium oxysporum and some mycotoxin-producing fungi Fusarium crookwellense and Paecilomyces variotii. These favorable properties make BglS27 a good candidate for utilization in biotechnological applications such as plant protection, feed, and food preservation.     

Complete stereospecific repair of a synthetic dinucleotide spore photoproduct by spore photoproduct lyase

Spore photoproduct lyase (SP lyase), a member of the radical S-adenosylmethionine superfamily of enzymes, catalyzes the repair of 5-thyminyl-5,6-dihydrothymine [spore photoproduct (SP)], a type of UV-induced DNA damage unique to bacterial spores. The anaerobic purification and characterization of Clostridium acetobutylicum SP lyase heterologously expressed in Escherichia coli, and its catalytic activity in repairing stereochemically defined synthetic dinucleotide SPs was investigated. The purified enzyme contains between 2.3 and 3.1 iron atoms per protein. Electron paramagnetic resonance (EPR) spectroscopy reveals an isotropic signal centered at g = 1.99, characteristic of a [3Fe–4S]⁺ cluster accounting for 3–4% of the iron in the sample. Upon reduction, a nearly axial signal (g = 2.03, 1.93 and 1.92) characteristic of a [4Fe–4S]⁺ cluster is observed that accounts for 34–45% of total iron. Addition of S-adenosylmethionine to the reduced enzyme produces a rhombic signal (g = 2.02, 1.93, 1.82) unique to the S-adenosyl-l-methionine complex while decreasing the overall EPR intensity. This reduced enzyme is shown to rapidly and completely repair the 5R diastereomer of a synthetic dinucleotide SP with a specific activity of 7.1 ± 0.6 nmol min⁻¹ mg⁻¹, whereas no repair was observed for the 5S diastereomer.     

Biochemical characterization of glyceraldehyde-3-phosphate dehydrogenase from <Emphasis Type="Italic">Thermococcus kodakarensis</Emphasis> KOD1

Glyceraldehyde-3-phosphate dehydrogenase (GAPDH) plays an essential role in glycolysis by catalyzing the conversion of d-glyceraldehyde 3-phosphate (d-G3P) to 1,3-diphosphoglycerate using NAD⁺ as a cofactor. In this report, the GAPDH gene from the hyperthermophilic archaeon Thermococcus kodakarensis KOD1 (GAPDH-tk) was cloned and the protein was purified to homogeneity. GAPDH-tk exists as a homotetramer with a native molecular mass of 145 kDa; the subunit molecular mass was 37 kDa. GAPDH-tk is a thermostable protein with a half-life of 5 h at 80–90°C. The apparent K _m values for NAD⁺ and d-G3P were 77.8 ± 7.5 μM and 49.3 ± 3.0 μM, respectively, with V _max values of 45.1 ± 0.8 U/mg and 59.6 ± 1.3 U/mg, respectively. Transmission electron microscopy (TEM) and image processing confirmed that GAPDH-tk has a tetrameric structure. Interestingly, GAPDH-tk migrates as high molecular mass forms (~232 kDa and ~669 kDa) in response to oxidative stress.     

Synthesis,Expression and Purification of a Type of Chlorotoxin-like Peptide from the Scorpion, <Emphasis Type="Italic">Buthus martensii</Emphasis> Karsch,and its Acute Toxicity Analysis

A gene, rBmK Cta, encoding a chlorotoxin-like peptide from the scorpion, Buthus martensii Karsch, was synthesized according to the sequence optimized for codon usage in Escherichia coli and was expressed in E.␣coli BL21 (DE3) using a pExSecI expression system in which the IgG-binding domain-ZZ of protein A is fused to the N-terminal of rBmK CTa. The fusion protein, ZZ-rBmK CTa, was expressed in soluble form (7.8 mg l⁻¹) and was purified to give a single band on SDS-PAGE. The domain-ZZ of fusion protein ZZ-rBmK CTa was removed by cleavage of an Asn–Gly peptide bond with hydroxylamine. The rBmK CTa was separated from the IgG-binding moiety by a second passage through the IgG affinity column. Western blot analysis demonstrated that this protein was rBmK CTa. Acute toxicity assay in mice demonstrated that the rBmK CTa had an LD₅₀ value of 4.3 mg kg⁻¹.     

Sandwich ELISA for quantitative detection of human collagen prolyl 4-hydroxylase

Background  

We describe a method for specific, quantitative and quick detection of human collagen prolyl 4-hydroxylase (C-P4H), the key enzyme for collagen prolyl-4 hydroxylation, in crude samples based on a sandwich ELISA principle. The method is relevant to active C-P4H level monitoring during recombinant C-P4H and collagen production in different expression systems. The assay proves to be specific for the active C-P4H α₂β₂ tetramer due to the use of antibodies against its both subunits. Thus in keeping with the method C-P4H is captured by coupled to an anti-α subunit antibody magnetic beads and an anti-β subunit antibody binds to the PDI/β subunit of the protein. Then the following holoenzyme detection is accomplished by a goat anti-rabbit IgG labeled with alkaline phosphatase which AP catalyzes the reaction of a substrate transformation with fluorescent signal generation.     

Production of <Emphasis Type="SmallCaps">l</Emphasis>-phenylalanine from glycerol by a recombinant <Emphasis Type="Italic">Escherichia coli</Emphasis>

The production of l-phenylalanine is conventionally carried out by fermentations that use glucose or sucrose as the carbon source. This work reports on the use of glycerol as an inexpensive and abundant sole carbon source for producing l-phenylalanine using the genetically modified bacterium Escherichia coli BL21(DE3). Fermentations were carried out at 37°C, pH 7.4, using a defined medium in a stirred tank bioreactor at various intensities of impeller agitation speeds (300–500 rpm corresponding to 0.97–1.62 m s⁻¹ impeller tip speed) and aeration rates (2–8 L min⁻¹, or 1–4 vvm). This highly aerobic fermentation required a good supply of oxygen, but intense agitation (impeller tip speed ~1.62 m s⁻¹) reduced the biomass and l-phenylalanine productivity, possibly because of shear sensitivity of the recombinant bacterium. Production of l-phenylalanine was apparently strongly associated with growth. Under the best operating conditions (1.30 m s⁻¹ impeller tip speed, 4 vvm aeration rate), the yield of l-phenylalanine on glycerol was 0.58 g g⁻¹, or more than twice the best yield attainable on sucrose (0.25 g g⁻¹). In the best case, the peak concentration of l-phenylalanine was 5.6 g L⁻¹, or comparable to values attained in batch fermentations that use glucose or sucrose. The use of glycerol for the commercial production of l-phenylalanine with E. coli BL21(DE3) has the potential to substantially reduce the cost of production compared to sucrose- and glucose-based fermentations.     

Heterologous expression and characterization of <Emphasis Type="Italic">Bacillus coagulans</Emphasis><Emphasis Type="SmallCaps">l</Emphasis>-arabinose isomerase

Bacillus coagulans has been of great commercial interest over the past decade owing to its strong ability of producing optical pure l-lactic acid from both hexose and pentose sugars including l-arabinose with high yield, titer and productivity under thermophilic conditions. The l-arabinose isomerase (L-AI) from Bacillus coagulans was heterologously over-expressed in Escherichia coli. The open reading frame of the L-AI has 1,422 nucleotides encoding a protein with 474 amino acid residues. The recombinant L-AI was purified to homogeneity by one-step His-tag affinity chromatography. The molecular mass of the enzyme was estimated to be 56 kDa by SDS-PAGE. The enzyme was most active at 70°C and pH 7.0. The metal ion Mn²⁺ was shown to be the best activator for enzymatic activity and thermostability. The enzyme showed higher activity at acidic pH than at alkaline pH. The kinetic studies showed that the K _m, V _max and k _cat/K _m for the conversion of l-arabinose were 106 mM, 84 U/mg and 34.5 mM⁻¹min⁻¹, respectively. The equilibrium ratio of l-arabinose to l-ribulose was 78:22 under optimal conditions. l-ribulose (97 g/L) was obtained from 500 g/l of l-arabinose catalyzed by the enzyme (8.3 U/mL) under the optimal conditions within 1.5 h, giving at a substrate conversion of 19.4% and a production rate of 65 g L⁻¹ h⁻¹.     

Production of hexanoic acid from d-galactitol by a newly isolated Clostridium sp. BS-1

In a study screening anaerobic microbes utilizing d-galactitol as a fermentable carbon source, four bacterial strains were isolated from an enrichment culture producing H₂, ethanol, butanol, acetic acid, butyric acid, and hexanoic acid. Among these isolates, strain BS-1 produced hexanoic acid as a major metabolic product of anaerobic fermentation with d-galactitol. Strain BS-1 belonged to the genus Clostridium based on phylogenetic analysis using 16S rRNA gene sequences, and the most closely related strain was Clostridium sporosphaeroides DSM 1294^T, with 94.4% 16S rRNA gene similarity. In batch cultures, Clostridium sp. BS-1 produced 550 ± 31 mL L⁻¹ of H₂, 0.36 ± 0.01 g L⁻¹ of acetic acid, 0.44 ± 0.01 g L⁻¹ of butyric acid, and 0.98 ± 0.03 g L⁻¹ of hexanoic acid in a 4-day cultivation. The production of hexanoic acid increased to 1.22 and 1.73 g L⁻¹ with the addition of 1.5 g L⁻¹ of sodium acetate and 100 mM 2-(N-morpholino)ethanesulfonic acid (MES), respectively. Especially when 1.5 g L⁻¹ of sodium acetate and 100 mM MES were added simultaneously, the production of hexanoic acid increased up to 2.99 g L⁻¹. Without adding sodium acetate, 2.75 g L⁻¹ of hexanoic acid production from d-galactitol was achieved using a coculture of Clostridium sp. BS-1 and one of the isolates, Clostridium sp. BS-7, in the presence of 100 mM MES. In addition, volatile fatty acid (VFA) production by Clostridium sp. BS-1 from d-galactitol and d-glucose was enhanced when a more reduced culture redox potential (CRP) was applied via addition of Na₂S·9H₂O.     

Characterization of an L-arabinose isomerase from Bacillus subtilis

An isolated gene from Bacillus subtilis str. 168 encoding a putative isomerase was proposed as an L-arabinose isomerase (L-AI), cloned into Escherichia coli, and its nucleotide sequence was determined. DNA sequence analysis revealed an open reading frame of 1,491 bp, capable of encoding a polypeptide of 496 amino acid residues. The gene was overexpressed in E. coli and the protein was purified using nickel-nitrilotriacetic acid chromatography. The purified enzyme showed the highest catalytic efficiency ever reported, with a k _cat of 14,504 min⁻¹ and a k _cat/K _m of 121 min⁻¹ mM⁻¹ for L-arabinose. A homology model of B. subtilis L-AI was constructed based on the X-ray crystal structure of E. coli L-AI. Molecular dynamics simulation studies of the enzyme with the natural substrate, L-arabinose, and an analogue, D-galactose, shed light on the unique substrate specificity displayed by B. subtilis L-AI only towards L-arabinose. Although L-AIs have been characterized from several other sources, B. subtilis L-AI is distinguished from other L-AIs by its high substrate specificity and catalytic efficiency for L-arabinose.     

Characterization of a novel ginsenoside-hydrolyzing α-l-arabinofuranosidase, AbfA, from Rhodanobacter ginsenosidimutans Gsoil 3054T

The gene encoding an α-l-arabinofuranosidase that could biotransform ginsenoside Rc {3-O-[β-d-glucopyranosyl-(1–2)-β-d-glucopyranosyl]-20-O-[α-l-arabinofuranosyl-(1–6)-β-d-glucopyranosyl]-20(S)-protopanaxadiol} to ginsenoside Rd {3-O-[β-d-glucopyranosyl-(1–2)-β-d-glucopyranosyl]-20-O-β-d-glucopyranosyl-20(S)-protopanaxadiol} was cloned from a soil bacterium, Rhodanobacter ginsenosidimutans strain Gsoil 3054^T, and the recombinant enzyme was characterized. The enzyme (AbfA) hydrolyzed the arabinofuranosyl moiety from ginsenoside Rc and was classified as a family 51 glycoside hydrolase based on amino acid sequence analysis. Recombinant AbfA expressed in Escherichia coli hydrolyzed non-reducing arabinofuranoside moieties with apparent K _m values of 0.53 ± 0.07 and 0.30 ± 0.07 mM and V _max values of 27.1 ± 1.7 and 49.6 ± 4.1 μmol min⁻¹ mg⁻¹ of protein for p-nitrophenyl-α-l-arabinofuranoside and ginsenoside Rc, respectively. The enzyme exhibited preferential substrate specificity of the exo-type mode of action towards polyarabinosides or oligoarabinosides. AbfA demonstrated substrate-specific activity for the bioconversion of ginsenosides, as it hydrolyzed only arabinofuranoside moieties from ginsenoside Rc and its derivatives, and not other sugar groups. These results are the first report of a glycoside hydrolase family 51 α-l-arabinofuranosidase that can transform ginsenoside Rc to Rd.