Changes in water quality in Lake Päijänne following decrease of effluent load from the pulp and paper industry in 1969–1989

Lake Päijänne, the second largest lake in Finland, has been seriously polluted since the 1960s due to the effluents from pulp and paper mills, notably the Äänekoski sulphate and sulphite pulp mills situated about 50 km north of the lake, and the sulphite pulp mill and paper mills of Jämsänkoski and Kaipola on Central Lake Päijänne.A sulphite lye evaporation and combustion plant installed at the Jämsänkoski sulphite pulp mill in 1969 reduced the organic pollution of Central Päijänne. Lignin concentration decreased and the oxygen balance improved. The sulphite pulp mill was closed in 1981 and replaced by a thermo-mechanical pulp mill. Eutrophication is the main threat to water quality in Central Lake Päijänne at present.A significant improvement in the water quality, especially in oxygen balance, was achieved in the watercourse of Äänekoski and in Northern Päijänne after replacement of the old sulphite and sulphate pulp mills at Äänekoski by a large sulphate pulp mill with a biological purification plant employing the activated sludge method. The BOD₇-loading dropped from 46 to 3–4 t d^–1, but the nutrient loading has not decreased sufficiently, and the Äänekoski watercourse and Northern Päijänne are still eutrophic.     

The role of microorganisms in the formation of pitch deposits in pulp and paper mills

The cause of pitch deposit formation seems still not fully understood. The work reported here demonstrates that microorganisms effect the agglomeration of emulgated resin droplets and the formation of sticky precipitates.

Pitch deposits from mills consist mainly of ethanol-soluble resins. It is also the ethanol-soluble fraction of wood resins which forms stable emulsions and which is easily agglomerated by microorganisms.

Pitch deposits, collected from various pulp and paper mills, were all found to contain large amounts of microorganisms. Sterile resin emulsions prepared from pitch deposits remained stable over long periods. After inoculation with microorganisms the emulsions were destabilized and the resins completely precipitated as sticky lumps.

Various bacteria and fungi are capable of agglomerating the resins, but species isolated from water, pulp and slime in paper mills were usually most effective. Resins from fresh wood were precipitated at a faster rate than aged resins.

Problems of pitch formation can be considerably reduced when microbial growth is kept under control in the production system. To be effective, the control measures, e.g. slimicides, must be applied at the right place and time, and in the correct concentrations. This presupposes a thorough knowledge of the plant's microbiological condition which can only be obtained by microbiological examination. Practical cases of the appropriate application of biocides in pulp and paper mill systems are discussed.     

Coliform bacteria and nitrogen fixation in pulp and paper mill effluent treatment systems

The majority of pulp and paper mills now biotreat their combined effluents using activated sludge. On the assumption that their wood-based effluents have negligible fixed N, and that activated-sludge microorganisms will not fix significant N, these mills routinely spend large amounts adding ammonia or urea to their aeration tanks (bioreactors) to permit normal biomass growth. N(2) fixation in seven Eastern Canadian pulp and paper mill effluent treatment systems was analyzed using acetylene reduction assays, quantitative nitrogenase (nifH) gene probing, and bacterial isolations. In situ N(2) fixation was undetectable in all seven bioreactors but was present in six associated primary clarifiers. One primary clarifier was studied in greater detail. Approximately 50% of all culturable cells in the clarifier contained nifH, of which >90% were Klebsiella strains. All primary-clarifier coliform bacteria growing on MacConkey agar were identified as klebsiellas, and all those probed contained nifH. In contrast, analysis of 48 random coliform isolates from other mill water system locations showed that only 24 (50%) possessed the nifH gene, and only 13 (27%) showed inducible N(2)-fixing activity. Thus, all the pulp and paper mill primary clarifiers tested appeared to be sites of active N(2) fixation (0.87 to 4.90 mg of N liter(-1) day(-1)) and a microbial community strongly biased toward this activity. This may also explain why coliform bacteria, especially klebsiellas, are indigenous in pulp and paper mill water systems.     

Determination of the kinetic parameters of the phenol-degrading thermophile Bacillus themoleovorans sp. A2

Phenolic compounds are pollutants in many wastewaters, e.g. from crude oil refineries, coal gasification plants or olive oil mills. Phenol removal is a key process for the biodegradation of pollutants at high temperatures because even low concentrations of phenol can inhibit microorganisms severely. Bacillus thermoleovorans sp. A2, a recently isolated thermophilic strain (temperature optimum 65 degrees C), was investigated for its capacity to degrade phenol. The experiments revealed that growth rates were about four times higher than those of mesophilic microorganisms such as Pseudomonas putida. Very high specific growth rates of 2.8 h(-1) were measured at phenol concentrations of 15 mg/l, while at phenol concentrations of 100-500 mg/l growth rates were still in the range of 1 h(-1). The growth kinetics of the thermophilic Bacillus thermoleovorans sp. A2 on phenol as sole carbon and energy source can be described using a three-parameter model developed in enzyme kinetics. The yield coefficient Yx/s of 0.8-1 g cell dry weight/g phenol was considerably higher than cell yields of mesophilic bacteria (Yx/s 0.40-0.52 g cell dry weight/g phenol). The highest growth rate was found at pH 6. Bacillus thermoleovorans sp. A2 was found to be insensitive to hydrodynamic shear stress in stirred bioreactor experiments (despite possible membrane damage caused by phenol) and flourished at an ionic strength of the medium of 0.25(-1) mol/l (equivalent to about 15-60 g NaCl/l). These exceptional properties make Bacillus thermoleovorans sp. A2 an excellent candidate for technical applications.     

Disruption of baker's yeast by a new bead mill

Summary A continuous high-speed bead mill of novel design (Sulzer Annu Mill 01) was tested for cell disruption of baker's yeast as a model system. The efficiency of cell disruption was evaluated for the relative amount of released protein. The effects of rotation speed, cell concentration and flow rate of cell suspension on the cell disruption were investigated. The maximum yield of released protein was found to be 2.62 kg protein/L.h. This novel design appears to be more effective than existing commercially available mills.Notations Cs cell concentration (g packed yeast/L) - F flow rate of suspension, mL/min - F_R cumulative residence time distribution - N rotation speed of the rotor (rpm) - P number of passes of suspension through mill - R amount of protein released from cell, mg/g packed yeast - R_m maximum amount of protein released, mg/g packed yeast - t time, s - mean residence time, s     

塔里木河冲积平原胡杨林的土壤水分状况研究

通过英巴扎断面实测资料,对塔里木河冲积平原胡杨(Populus euphratica)林的土壤水分状况进行了研究。结果表明：在胡杨幼林区域,地下水埋深1～2m,水质为1～3g·L-1的微咸水,且此区域可被洪水漫溢,整个土壤剖面土壤含水率都很高,利于胡杨种子萌发与植株扎根。在胡杨青壮林区域,地下水埋深2.5～4m,但地下水水质仍为1～3g·L-1。由于多数年份不能被洪水漫溢,土壤表层水分含量低,此区域难以满足胡杨幼林对水分的需求。但是,对于胡杨青壮林来说,它能够吸收2.5～4m深的土壤水分,因而此区域可以满足它的生长要求。在胡杨衰败林区域,地下水埋深已达5～10m,不能满足胡杨生长的要求,使得胡杨在逐步枯萎和衰败。     

Microbiologic problems associated with closed process water systems in the paper industry

Summary Process water from the entirely closed water system of a wastepaper reprocessing mill was examined for its content of different groups of microorganisms. Comparison with waste-paper reprocessing mills with nonclosed systems and concomitant higher specific water consumption showed that system closing is associated with a marked increase in the number of anaerobic microorganisms; Bifidobacteria were found to be the most frequently represented bacteria.The development of the microflora in the entirely closed water system was studied after total replacement of the process water with fresh water. Constant levels of anaerobic microorganisms were recorded after a lag period of 15 days. Gas chromatographic analyses showed that the process water from the entirely closed system contains significant amounts of metabolic products of anaerobic microorganisms.     

Chemical characterization of pitch deposits produced in the manufacturing of high-quality paper pulps from hemp fibers

The composition of pitch deposits occurring in pulp sheets and mill circuits during soda/anthraquinone pulping and elemental chlorine-free pulp bleaching of bast fibers of industrial hemp (Cannabis sativa) was studied. Pitch deposits were extracted with acetone, and the extracts analyzed by gas chromatography (GC) and gas chromatography/mass spectrometry (GC/MS). Acetone extracts (15-25% of pitch deposits) were constituted by the defoamers used at the mill and by lipophilic extractives from hemp fibers. Acetone-insoluble residues (75-85% of pitch deposits) were analyzed by pyrolysis-GC/MS in the presence and absence of tetramethylammonium hydroxide. These residues were constituted by salts of fatty acids (arising from hemp fibers) with calcium, magnesium, aluminum and other cations that were identified in the deposits. It was concluded that inappropriate use of defoamer together with the presence of multivalent ions seemed to be among the causes of hemp extractives deposition in the pitch problems reported here.     

枯草芽孢杆菌对泥鳅养殖池塘水水质的改善研究

通过在泥鳅(Misgurnus anguillicaudatus Cantor)养殖水体中施加一定浓度梯度枯草芽孢杆菌(Bacillus subtili Cohns),测定了水化学指标并观察泥鳅生长情况。试验结果表明:枯草芽孢杆菌能够稳定养殖水体的pH值,对COD_Mn、TN和NO₃^--N降解极为显著,其降解速率分别为1.2、0.24和2.7g·L^-1·d^-1,TP在一定范围内波动;当菌液浓度大于149mL·L^-1时,随着浓度的增加,停食后的泥鳅体重变化减小,因此,枯草芽孢杆菌对泥鳅养殖池塘水水质改善效果明显。     

The distribution,structure, and composition of freshwater ice deposits in Bolivian salt lakes

Freshwater ice deposits are described from seven, high elevation (4117–4730 m), shallow (mean depth <30 cm), saline (10–103 g l^-1) lakes in the southwestern corner of Bolivia. The ice deposits range to several hundred meters in length and to 7 m in height above the lake or playa surface. They are located near the lake or salar margins; some are completely surrounded by water, others by playa deposits or salt crusts. Upper surfaces and sides of the ice deposits usually are covered by 20–40 cm of white to light brown, dry sedimentary materials. Calcite is the dominant crystalline mineral in these, and amorphous materials such as diatom frustules and volcanic glass are also often abundant.Beneath the dry overburden the ice occurs primarily as horizontal lenses 1–1000 mm thick, irregularly alternating with strata of frozen sedimentary materials. Ice represents from 10 to 87% of the volume of the deposits and yields freshwater (TFR <3 g l^-1) when melted. Oxygen isotope ratios for ice are similar to those for regional precipitation and shoreline seeps but much lower than those for the lakewaters. Geothermal flux is high in the region as evidenced by numerous hot springs and deep (3.0–3.5 m) sediment temperatures of 5–10°C. This flux is one cause of the present gradual wasting away of these deposits. Mean annual air temperatures for the different lakes probably are all in the range of -2 to 4°C, and mean midwinter temperatures about 5°C lower. These deposits apparently formed during colder climatic conditions by the freezing of low salinity porewaters and the building up of segregation ice lenses.     

<Emphasis Type="Italic">Bacillus amyloliquefaciens</Emphasis> Spore Production Under Solid-State Fermentation of Lignocellulosic Residues

This study was conducted to elucidate cultivation conditions determining Bacillus amyloliquefaciens B-1895 growth and enhanced spore formation during the solid-state fermentation (SSF) of agro-industrial lignocellulosic biomasses. Among the tested growth substrates, corncobs provided the highest yield of spores (47?×?10¹⁰ spores g^?1 biomass) while the mushroom spent substrate and sunflower oil mill appeared to be poor growth substrates for spore formation. Maximum spore yield (82?×?10¹⁰ spores g^?1 biomass) was achieved when 15 g corncobs were moistened with 60 ml of the optimized nutrient medium containing 10 g peptone, 2 g KH₂PO₄, 1 g MgSO₄·7H₂O, and 1 g NaCl per 1 l of distilled water. The cheese whey usage for wetting of lignocellulosic substrate instead water promoted spore formation and increased the spore number to 105?×?10¹⁰ spores g^?1. Addition to the cheese whey of optimized medium components favored sporulation process. The feasibility of developed medium and strategy was shown in scaled up SSF of corncobs in polypropylene bags since yield of 10?×?10¹¹ spores per gram of dry biomass was achieved. In the SSF of lignocellulose, B. amyloliquefaciens B-1895 secreted comparatively high cellulase and xylanase activities to ensure good growth of the bacterial culture.     

Outdoor and indoor cultivation of Spirulina platensis in the extreme south of Brazil

Water supplemented with 10% or 20% (v/v) of Zarrouk medium was used to cultivate Spirulina platensis in closed and open bioreactors under controlled conditions (30 degrees C, 32.5 micromol m(-2) s(-1), 12 h light/dark photoperiod) and in a greenhouse (9.4 to 46 degrees C, up to 2800 micromol m(-2) s(-1), variable day length photoperiod) using different initial biomass concentrations (X0) in the extreme south of Brazil (32.05 degrees S, 52.11 degrees W). Under controlled conditions the maximum specific growth rate (micromax) was 0.102 d(-1), the biomass doubling time (t(d)) was 6.8 d, the maximum dry biomass concentration (Xmax) was 1.94 g L(-1) and the maximum productivity (Pmax) was 0.059 g L(-)1 d(-1), while the corresponding values in the greenhouse experiments were micromax = 0.322 d(-1), t(d) = 2.2 d, Xmax = 1.73 g L(-1) and Pmax = 0.112 g L(-1) d(-1). Under controlled conditions the highest values for these parameters occurred when X0 = 0.15 g L(-1), while in the greenhouse X0 = 0.4 g L(-1) produced the highest values. These results show that the cultivation of S. platensis in greenhouses in the extreme south of Brazil is technically viable and that the S. platensis inoculum and the concentration of Zarrouk medium can be combined in such a way as to obtain growth and productivity parameters comparable, or superior, to those occurring in bioreactors under controlled conditions of temperature, illuminance and photoperiod.     

Microbial metabolism of alkylbenzene sulphonates. Variance in enzyme complement of a Bacillus in response to growth substrate

Growth of a Bacillus species at the expense of an alkylbenzene sulphonate (ABS) synthetic detergent homologue (1-phenylundecane-p-sulphonate, 11-ABS) containing an odd number of carbon atoms in the alkyl side chain induced an enzyme complement able to biodegrade 11-ABS by alkyl side-chain oxidation, and ortho cleavage aromatic-ring oxidation reactions. Growth of the Bacillus at the expense of an ABS homologue containing an even number of carbon atoms in the alkyl side chain (1-phenyldodecane-p-sulphonate, 12-ABS) induced an enzyme complement able to biodegrade 12-ABS by alkyl side-chain oxidation, and meta cleavage aromatic-ring oxidation reactions.The results of a number of different growth and enzyme induction experiments confirm that both 11-ABS and 12-ABS are initially biodegraded by an identical complement of enzymes catalysing the alkyl-side-chain oxidation reactions, but that the subsequent metabolism of the aromatic moieties remaining after the removal of the alkyl side chain from 11-ABS and 12-ABS occurs by two separate pathways requiring the de novo induction of different substrate-specific enzyme complements. The detection of the predicted changes in enzyme complement subsequent to changes in the growth substrate of the Bacillus provide confirmation of the biodegradation pathways operating in the microorganism.     

Chemical investigations of Loch Etive,Scotland. II. Dissolved organic compounds

Variations in the levels of dissolved organic compounds in Loch Etive were studied during 1971. The amount of dissolved organic nitrogen, dissolved organic phosphorus, and Gelbstoff were markedly affected by the freshwater run-off. The surface (1 m) concentrations of the dissolved organic nitrogen and dissolved organic phosphorus throughout the year ranged from 3.0–9.0 μg-at. NO₃-N/l and 0.02-0.45 μg-at. PO₄-P/1, respectively. The surface levels of Gelbstoff during the year as measured by the optical density of the water at 320 nm and 400 nm fluctuated between 0.08-0.490 and 0.020-0.140, respectively. In the bottom layers of the Lower Basin (40–50 m) the optical density of the water at 320 nm and 400 nm throughout the year ranged between 0.060-0.150 and 0.010-0.047, in the Deep Basin (115–140 m) the values were between 0.086-0.130 and 0.018-0.037 and at the Head of the Loch, (25–35 m) they fluctuated between 0.080-0.229 and 0.017-0.052, respectively. The vertical concentrations of the dissolved organic nitrogen, dissolved organic phosphorus and Gelbstoff decreased irregularly from the surface downward. The concentrations of the dissolved organic nitrogen at the surface of the Lower Basin during the year were similar to those found at 40–50 m. In the Deep Basin and at the Head of the Loch the surface values were higher than those observed at 115–140 m and 25–35 m, respectively. The concentrations of the dissolved organic phosphorus at the surface of the Lower Basin were close to those found at the bottom (40–50 m). In the Deep Basin the surface values were higher than those at 115–140 m and at the Head of the Loch the surface concentrations were variably higher or lower than the bottom layers (25–35 m). The ratio of the optical density at 320 nm and 400 nm in the photic zone (1 m, 4–5 m, and 10 m) during the year ranged between 3.2–4.0 with the lowest ratios in winter and autumn. A similar pattern was observed in the water column of the Lower Basin and at the Head of the Loch. In the deeper strata of the Deep Basin, ratios were usually between 4.0–5.3 for most of the year. A comparison between the optical densities of the surface water during winter and autumn and that at 115–140 m (Deep Basin), suggests that the fraction more liable to precipitate is found in the visible region of the spectrum (400 nm).     

Bacterial community diversity in paper mills processing recycled paper

Paper mills processing recycled paper suffer from biofouling causing problems both in the mill and final product. The total bacterial community composition and identification of specific taxa in the process water and biofilms at the stock preparation and paper machine areas in a mill with recycled paper pulp was described by using a DNA-based approach. Process water in a similar mill was also analyzed to investigate if general trends can be found between mills and over time. Bacterial community profiles, analyzed by terminal-restriction fragment length polymorphism (T-RFLP), in process water showed that the dominant peaks in the profiles were similar between the two mills, although the overall composition was unique for each mill. When comparing process water and biofilm at different locations within one of the mills, we observed a separation according to location and sample type, with the biofilm from the paper machine being most different. 16S rRNA gene clone libraries were generated and 404 clones were screened by RFLP analysis. Grouping of RFLP patterns confirmed that the biofilm from the paper machine was most different. A total of 99 clones representing all RFLP patterns were analyzed, resulting in sequences recovered from nine bacterial phyla, including two candidate phyla. Bacteroidetes represented 45% and Actinobacteria 23% of all the clones. Sequences with similarity to organisms implicated in biofouling, like Chryseobacterium spp. and Brevundimonas spp., were recovered from all samples even though the mill had no process problems during sampling, suggesting that they are part of the natural paper mill community. Moreover, many sequences showed little homology to as yet uncultivated bacteria implying that paper mills are interesting for isolation of new organisms, as well as for bioprospecting.     

Effects of pulp and paper mill effluents on estuarine and marine ecosystems in Canada: a review

This review examines the impact of pulp and paper mill effluents by comparing effects from Canada's east and west coasts at a time when revisions to the federal Fisheries Act (Pulp and Paper Effluent Regulations) are being finalized. Pulp and paper mill effluents from Canadian coastal mills were usually acutely toxic at source, and in many cases had marked deleterious effects on receiving waters due to toxicity, high biochemical oxygen demand (BOD), and total suspended solids (TSS) loadings. Extreme reductions in ambient dissolved oxygen, impacts on benthic and intertidal organisms, changes in water colour and primary productivity, have been demonstrated over the years and continue to cause environmental damage. Contamination of biota by a wide range of chlorinated organic compounds has been more recently the focus of investigations.While sublethal effects of lowered dissolved oxygen levels and suspended solids on the water column and bottom communities are well known, the potential effects of major organochlorine contamination of water (measured as Adsorbable Organic Halogens=AOX), sediments, and biota are not fully understood, especially under natural and perturbated conditions. The findings of recent North American and Scandinavian studies which describe liver enzyme activation, histological damage, reproductive and population level changes in fish, are a major concern as they are a sign of ecosystem stress and pathology.The environmental effects described herein are long-term impacts which will not respond quickly to changes in pollutant loading. Integrated site-specific assessments need to be undertaken to document ecosystem response to process and treatment improvements at mill sites. Current biomonitoring techniques including measures of population structure and ecosystem function are needed in addition to sensitive biochemical indicators of contaminant exposure.     

Coliform Bacteria and Nitrogen Fixation in Pulp and Paper Mill Effluent Treatment Systems

The majority of pulp and paper mills now biotreat their combined effluents using activated sludge. On the assumption that their wood-based effluents have negligible fixed N, and that activated-sludge microorganisms will not fix significant N, these mills routinely spend large amounts adding ammonia or urea to their aeration tanks (bioreactors) to permit normal biomass growth. N₂ fixation in seven Eastern Canadian pulp and paper mill effluent treatment systems was analyzed using acetylene reduction assays, quantitative nitrogenase (nifH) gene probing, and bacterial isolations. In situ N₂ fixation was undetectable in all seven bioreactors but was present in six associated primary clarifiers. One primary clarifier was studied in greater detail. Approximately 50% of all culturable cells in the clarifier contained nifH, of which >90% were Klebsiella strains. All primary-clarifier coliform bacteria growing on MacConkey agar were identified as klebsiellas, and all those probed contained nifH. In contrast, analysis of 48 random coliform isolates from other mill water system locations showed that only 24 (50%) possessed the nifH gene, and only 13 (27%) showed inducible N₂-fixing activity. Thus, all the pulp and paper mill primary clarifiers tested appeared to be sites of active N₂ fixation (0.87 to 4.90 mg of N liter⁻¹ day⁻¹) and a microbial community strongly biased toward this activity. This may also explain why coliform bacteria, especially klebsiellas, are indigenous in pulp and paper mill water systems.     

Characterisation of aerobically grown non-spore-forming bacteria from paper mill pulps containing recycled fibres

A total of 179 non-spore-forming bacteria aerobically growing on Nutrient Agar, Plate Count Agar or in specific enrichment conditions for salmonella, campylobacteria, listeria, yersinia or staphylococci, were isolated from 16 untreated paper mill pulps. After phenotypical screening the isolates were characterised by automated ribotyping and partial sequencing of the 16S rRNA gene. They could be divided into seven taxonomical classes representing 63 taxa (species): actinobacteria (11 species), bacilli (7), flavobacteria (3) alphaproteobacteria (10), betaproteobacteria (5), gammaproteobacteria (25) and sphingobacteria (2). Most of the gammaproteobacteria were enterobacteria, mainly species of the genera Enterobacter (7 species, 7 samples/3 mills) and Klebsiella (5 species, 6 samples/3 mills). Other commonly occurring bacteria were most closely related to Microbacterium barkeri (7 samples/3 mills), Cloacibacterium normanense (6 samples/2 mills), Pseudoxanthomonas taiwanensis (5 samples/2 mills) and Sphingobacterium composti (5 samples/1 mill). Sporadic isolates of Listeria innocua, L. monocytogenes, Enterococcus casseliflavus and Staphylococcus warneri were detected, from which only L. monocytogenes is considered to be a food pathogen. No isolates of the genera Campylobacter, Salmonella or Yersinia were detected. The detected bacteria may be harmful in process control, but the load of food pathogens with recycled fibres to paper machines is insignificant. Faecal contamination of the pulp samples was not indicated.     

The influence of fish size size on the avoidance of hypoxia and oxygen selection by largemouth bass

When an oxygen gradient ranging from c . 10 to 95% air saturation was formed in a 5 m chamber, largemouth bass Micropterus salmoides avoided water in which dissolved oxygen values were <27% air saturation. There was a significant ( P <0·05) correlation between fish mass and the level of dissolved aquatic oxygen that was selected. Small fish (23–500 g) utilized waters of lower oxygen levels than did the larger fish (1000–3000 g). The results of this study suggest that largemouth bass are able to sense and avoid hypoxic water, and select aquatic oxygen tensions that maintain their metabolic scope for growth and activity.     

Activity and metabolic regulation of methane production in deep peat profiles of boreal bogs

The potential activity of methane production was determined in the vertical profiles of the peat deposits of three bogs in Tver oblast, which were representative of the boreal zone. In the minerotrophic fen, the rates of methane production measured throughout the profile did not change significantly with depth and comprised 3-6 ng CH4-C g(-1) h(-1). In ombrotrophic peat bogs, the rate did not exceed 5 ng CH4-C g(-1) h(-1) in the upper layer of the profile (up to 1.5 m) and increased to 15-30 ng CH4-C g(-1) h(-1) in the deep layers of the peat deposits. The distribution of fermentative microorganisms and methanogens in the profiles of peat deposits was uniform in all the studied bogs. In bog water samples, the presence of butyrate (up to 14.1 mg l(-1)) and acetate (up to 2.4 mg l(-1)) was revealed throughout the whole profile; in the upper 0.5-m layer of the ombrotrophic bogs, formate (up to 8.9 mg l(-1)) and propionate (up to 0.3 mg l(-1)) were detected as well. The arrangement of local maxima of the fatty acid content and methanogenic activity in the peat deposits, as well as the decrease in the acetate concentrations during summer, support the hypothesis that the initial substrates for methanogenesis come from the upper peat layers. It was established that the addition of sulfate and nitrate inhibits methane production in peat samples: the changes in the concentrations, recorded in situ, may also influence the methane content in peat layers.