Reaction of lactoperoxidase compound I with halides and thiocyanate

Lactoperoxidase (LPO) is found in mucosal surfaces and exocrine secretions, including milk, tears, and saliva, and has physiological significance in antimicrobial defense which involves (pseudo-) halide oxidation. This study for the first time presents transient kinetic measurements of the reactivity of its competent redox intermediate compound I with halides and thiocyanate, using the sequential stopped-flow technique. Compound I was produced with either H(2)O(2) [(1.1 +/- 0.1) x 10(7) M(-1) s(-1)] or hypochlorous acid [(3.2 +/- 0.1) x 10(7) M(-1) (s-1)]. At pH 7 and 15 degrees C, the two-electron reduction of compound I to native LPO by bromide and iodide has a second-order rate constant of (4.1 +/- 0.1) x 10(4) M(-1) s(-1) and (1.2 +/- 0.04) x 10(8) M(-1) s(-1), respectively. With thiocyanate the reaction is extremely fast (2.0 x 10(8) M(-1) s(-1)), whereas chloride cannot function as electron donor. The results are discussed with respect to known kinetic data of homologous mammalian peroxidases and to the physiological role of LPO in antimicrobial defense.     

Nucleotide sequence analysis, overexpression in Escherichia coli and kinetic characterization of Anacystis nidulans catalase-peroxidase

Bifunctional catalase-peroxidases are the least understood type of peroxidases. A high-level expression in Escherichia coli of a fully active recombinant form of a catalase-peroxidase (KatG) from the cyanobacterium Anacystis nidulans (Synechococcus PCC 6301) is reported. Since both physical and kinetic characterization revealed its identity with the wild-type protein, the large quantities of recombinant KatG allowed the examination of both the spectral characteristics and the reactivity of its redox intermediates by using the multi-mixing stopped-flow technique. The homodimeric acidic protein (pI = 4.6) contained high catalase activity (apparent K(m) = 4.8 mM and apparent k(cat) = 8850 s(-1)). Cyanide is shown to be an effective inhibitor of the catalase reaction. The second-order rate constant for cyanide binding to the ferric protein is (6.9 +/- 0.2) x 10(5) M(-1 )s(-1) at pH 7.0 and 15 degrees C and the dissociation constant of the cyanide complex is 17 microM. Because of the overwhelming catalase activity, peroxoacetic acid has been used for compound I formation. The apparent second-order rate constant for formation of compound I from the ferric enzyme and peroxoacetic acid is (1.3 +/- 0.3) x 10(4 )M(-1 )s(-1) at pH 7.0 and 15 degrees C. The spectrum of compound I is characterized by about 40% hypochromicity, a Soret region at 406 nm, and isosbestic points between the native enzyme and compound I at 355 and 428 nm. Rate constants for reduction of KatG compound I by o-dianisidine, pyrogallol, aniline and isoniazid are shown to be (7.3 +/- 0.4) x 10(6) M(-1 )s(-1), (5.4 +/- 0.3) x 10(5) M(-1 )s(-1), (1.6 +/- 0.3) x 10(5) M(-1 )s(-1) and (4.3 +/- 0.2) x 10(4) M(-1 )s(-1), respectively. The redox intermediate formed upon reduction of compound I did not exhibit the classical red-shifted peroxidase compound II spectrum which characterizes the presence of a ferryl oxygen species. Its spectral features indicate that the single oxidizing equivalent in KatG compound II is contained on an amino acid which is not electronically coupled to the heme.     

Mechanism of reaction of myeloperoxidase with nitrite

Myeloperoxidase (MPO) is a major neutrophil protein and may be involved in the nitration of tyrosine residues observed in a wide range of inflammatory diseases that involve neutrophils and macrophage activation. In order to clarify if nitrite could be a physiological substrate of myeloperoxidase, we investigated the reactions of the ferric enzyme and its redox intermediates, compound I and compound II, with nitrite under pre-steady state conditions by using sequential mixing stopped-flow analysis in the pH range 4-8. At 15 degrees C the rate of formation of the low spin MPO-nitrite complex is (2.5 +/- 0.2) x 10(4) m(-1) s(-1) at pH 7 and (2.2 +/- 0.7) x 10(6) m(-1) s(-1) at pH 5. The dissociation constant of nitrite bound to the native enzyme is 2.3 +/- 0.1 mm at pH 7 and 31.3 +/- 0.5 micrometer at pH 5. Nitrite is oxidized by two one-electron steps in the MPO peroxidase cycle. The second-order rate constant of reduction of compound I to compound II at 15 degrees C is (2.0 +/- 0.2) x 10(6) m(-1) s(-1) at pH 7 and (1.1 +/- 0.2) x 10(7) m(-1) s(-1) at pH 5. The rate constant of reduction of compound II to the ferric native enzyme at 15 degrees C is (5.5 +/- 0.1) x 10(2) m(-1) s(-1) at pH 7 and (8.9 +/- 1.6) x 10(4) m(-1) s(-1) at pH 5. pH dependence studies suggest that both complex formation between the ferric enzyme and nitrite and nitrite oxidation by compounds I and II are controlled by a residue with a pK(a) of (4.3 +/- 0.3). Protonation of this group (which is most likely the distal histidine) is necessary for optimum nitrite binding and oxidation.     

Spectral and kinetic studies of the oxidation of monosubstituted phenols and anilines by recombinant Synechocystis catalase-peroxidase compound I.

A high-level expression in Escherichia coli of a fully active recombinant form of a catalase-peroxidase (KatG) from the cyanobacterium Synechocystis PCC 6803 is reported. Since both physical and kinetic characterization revealed its identity with the wild-type protein, the large quantities of recombinant KatG allowed the first examination of second-order rate constants for the oxidation of a series of aromatic donor molecules (monosubstituted phenols and anilines) by a bifunctional catalase-peroxidase compound I using the sequential-mixing stopped-flow technique. Because of the overwhelming catalase activity, peroxoacetic acid has been used for compound I formation. A >/=50-fold excess of peroxoacetic acid is required to obtain a spectrum of relatively pure and stable compound I which is characterized by about 40% hypochromicity, a Soret maximum at 406 nm, and isosbestic points between the native enzyme and compound I at 357 and 430 nm. The apparent second-order rate constant for formation of compound I from ferric enzyme and peroxoacetic acid is (8.74 +/- 0.26) x 10(3) M(-)(1) s(-)(1) at pH 7. 0. Reduction of compound I by aromatic donor molecules is dependent upon the substituent effect on the benzene ring. The apparent second-order rate constants varied from (3.6 +/- 0.1) x 10(6) M(-)(1) s(-)(1) for p-hydroxyaniline to (5.0 +/- 0.1) x 10(2) M(-)(1) s(-)(1) for p-hydroxybenzenesulfonic acid. They are shown to correlate with the substituent constants in the Hammett equation, which suggests that in bifunctional catalase-peroxidases the aromatic donor molecule donates an electron to compound I and loses a proton simultaneously. The value of rho, the susceptibility factor in the Hammett equation, is -3.4 +/- 0.4 for the phenols and -5.1 +/- 0.8 for the anilines. The pH dependence of compound I reduction by aniline exhibits a relatively sharp maximum at pH 5. The redox intermediate formed upon reduction of compound I has spectral features which indicate that the single oxidizing equivalent in KatG compound II is contained on an amino acid which is not electronically coupled to the heme.     

The reactivity of myeloperoxidase compound I formed with hypochlorous acid

The reaction of human myeloperoxidase (MPO) with hypochlorous acid (HOCl) was investigated by conventional stopped-flow spectroscopy at pH 5, 7, and 9. In the reaction of MPO with HOCl, compound I is formed. Its formation is strongly dependent on pH. HOCl (rather than OCl-) reacts with the unprotonated enzyme in its ferric state. Apparent second-order rate constants were determined to be 8.1 x 10(7) M(-1)s(-1) (pH 5), 2.0 x 10(8) M(-1)s(-1) (pH 7) and 2.0 x 10(6) M(-1)s(-1) (pH 9) at 15 degrees C. Furthermore, the kinetics and spectra of the reactions of halides and thiocyanate and of physiologically relevant one-electron donors (ascorbate, nitrite, tyrosine and hydrogen peroxide) with this compound I were investigated using the sequential-mixing technique. The results show conclusively that the redox intermediates formed upon addition of either hydrogen peroxide or hypochlorous acid to native MPO exhibit the same spectral features and reactivities and thus are identical. In stopped-flow investigations, the MPO/HOCl system has some advantage since: (i) in contrast to H2O2, HOCl cannot function as a one-electron donor of compound I; and (ii) MPO can easily be prevented from cycling by addition of methionine as HOCl scavenger. As a consequence, the observed absorbance changes are bigger and errors in data analysis are smaller.     

Oxidation of hydroquinone, 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone by human myeloperoxidase

Myeloperoxidase is very susceptible to reducing radicals because the reduction potential of the ferric/ferrous redox couple is much higher compared with other peroxidases. Semiquinone radicals are known to reduce heme proteins. Therefore, the kinetics and spectra of the reactions of p-hydroquinone, 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone with compounds I and II were investigated using both sequential-mixing stopped-flow techniques and conventional spectrophotometric measurements. At pH 7 and 15 degrees C the rate constants for compound I reacting with p-hydroquinone, 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone were determined to be 5.6+/-0.4 x 10(7) M(-1)s(-1), 1.3+/-0.1 x 10(6) M(-1)s(-1) and 3.1+/-0.3 x 10(6) M(-1)s(-1), respectively. The corresponding reaction rates for compound II reduction were calculated to be 4.5+/-0.3 x 10(6) M(-1)s(-1), 1.9+/-0.1 x 10(5) M(-1)s(-1) and 4.5+/-0.2 x 10(4) M(-1)s(-1), respectively. Semiquinone radicals, produced by compounds I and II in the classical peroxidation cycle, promote compound III (oxymyeloperoxidase) formation. We could monitor formation of ferrous myeloperoxidase as well as its direct transition to compound II by addition of molecular oxygen. Formation of ferrous myeloperoxidase is shown to depend strongly on the reduction potential of the corresponding redox couple benzoquinone/semiquinone. With 2,3-dimethylhydroquinone and 2,3,5-trimethylhydroquinone as substrate, myeloperoxidase is extremely quickly trapped as compound III. These MPO-typical features could have potential in designing specific drugs which inhibit the production of hypochlorous acid and consequently attenuate inflammatory tissue damage.     

The Reaction Rates of NO with Horseradish Peroxidase Compounds I and II

In this study the reactions between nitric oxide (NO) and horseradish peroxidase (HRP) compounds I and II were investigated. The reaction between compound I and NO has biphasic kinetics with a clearly dominant initial fast phase and an apparent second-order rate constant of (7.0 +/- 0.3) x 10(5) M(-1) s(-1) for the fast phase. The reaction of compound II and NO was found to have an apparent second-order rate constant of k(app) = (1.3 +/- 0.1) x 10(6) M(-1) s(-1) or (7.4 +/- 0.7) x 10(5) M(-1) s(-1) when measured at 409 nm (the isosbestic point between HRP and HRP-NO) and 419 nm (lambda(max) of compound II and HRP-NO), respectively. Interestingly, the reaction of compound II with NO is unusually high relative to that of compound I, which is usually the much faster reaction. Since horseradish peroxidase is prototypical of mammalian peroxidases with respect to the oxidation of small substrates, these results may have important implications regarding the lifetime and biochemistry of NO in vivo after inflammation where both NO and H(2)O(2) generation are increased several fold.     

Purification and characterization of a new cationic peroxidase from fresh flowers of Cynara scolymus L

A basic heme peroxidase isoenzyme (AKPC) has been purified to homogeneity from artichoke flowers (Cynara scolymus L.). The enzyme was shown to be a monomeric glycoprotein, M(r)=42300+/-1000, (mean+/-S.D.) with an isoelectric point >9. The native enzyme exhibits a typical peroxidase ultraviolet-visible spectrum with a Soret peak at 404 nm (epsilon=137,000+/-3000 M(-1) cm(-1)) and a Reinheitzahl (Rz) value (A(404nm)/A(280nm)) of 3.8+/-0.2. The ultraviolet-visible absorption spectra of compounds I, II and III were typical of class III plant peroxidases but unlike horseradish peroxidase isoenzyme C, compound I was unstable. Resonance Raman and UV-Vis spectra of the ferric form show that between pH 5.0 and 7.0 the protein is mainly 6 coordinate high spin with a water molecule as the sixth ligand. The substrate-specificity of AKPC is characteristic of class III (guaiacol-type) peroxidases with chlorogenic and caffeic acids, that are abundant in artichoke flowers, as particularly good substrates at pH 4.5. Ferric AKPC reacts with hydrogen peroxide to yield compound I with a second-order rate constant (k(+1)) of 7.4 x 10(5) M(-1) s(-1) which is significantly slower than that reported for most other class III peroxidases. The reaction of ferric and ferrous AKPC with nitric oxide showed a potential use of this enzyme for quantitative spectrophotometric determination of NO and as a component of novel NO sensitive electrodes.     

Kinetics of oxidation of serotonin by myeloperoxidase compounds I and II.

The oxidation of serotonin (5-hydroxytryptamine) by the myeloperoxidase intermediates compounds I and II was investigated by using transient-state spectral and kinetic measurements at 25.0 +/- 0.1 degrees C. Rapid scan spectra demonstrated that both compound I and compound II oxidize serotonin via one-electron processes. Rate constants for these reactions were determined using both sequential-mixing and single-mixing stopped-flow techniques. The second order rate constant obtained for the one-electron reduction of compound I to compound II by serotonin is (1.7 +/- 0.1) x 10(7) M(-1) x s(-1), and that for compound II reduction to native enzyme is (1.4 +/- 0.1) x 10(6) M(-1) x s(-1) at pH 7.0. The maximum pH of the compound I reaction with serotonin occurs in the pH range 7.0-7.5. At neutral pH, the rate constant for myeloperoxidase compound I reacting with serotonin is an order of magnitude larger than for its reaction with chloride, (2.2 +/- 0.2) x 10(6) M(-1) x s(-1). A direct competition of serotonin with chloride for myeloperoxidase compound I oxidation was observed. Our results suggest that serotonin may have a role to protect lipoproteins from oxidation and to prevent enzymes from inactivation caused by the potent oxidants HOCl and active oxygen species.     

Mechanism of reaction of melatonin with human myeloperoxidase

Recently, it was suggested that melatonin (N-acetyl-5-methoxytryptamine) is oxidized by activated neutrophils in a reaction most probably involving myeloperoxidase (Biochem. Biophys. Res. Commun. (2000) 279, 657-662). Myeloperoxidase (MPO) is the most abundant protein of neutrophils and is involved in killing invading pathogens. To clarify if melatonin is a substrate of MPO, we investigated the oxidation of melatonin by its redox intermediates compounds I and II using transient-state spectral and kinetic measurements at 25 degrees C. Spectral and kinetic analysis revealed that both compound I and compound II oxidize melatonin via one-electron processes. The second-order rate constant measured for compound I reduction at pH 7 and pH 5 are (6.1 +/- 0.2) x 10(6) M(-1) s(-1) and (1.0 +/- 0.08) x 10(7) M(-1) s(-1), respectively. The rates for the one-electron reduction of compound II back to the ferric enzyme are (9.6 +/- 0.3) x 10(2) M(-1) s(-1) (pH 7) and (2.2 +/- 0.1) x 10(3) M(-1) s(-1) (pH 5). Thus, melatonin is a much better electron donor for compound I than for compound II. Steady-state experiments showed that the rate of oxidation of melatonin is dependent on the H(2)O(2) concentration, is not affected by superoxide dismutase, and is quickly terminated by sodium cyanide. Melatonin can markedly inhibit the chlorinating activity of MPO at both pH 7 and pH 5. The implication of these findings in the activated neutrophil is discussed.     

Two-electron reduction and one-electron oxidation of organic hydroperoxides by human myeloperoxidase

The reaction of native myeloperoxidase (MPO) and its redox intermediate compound I with hydrogen peroxide, ethyl hydroperoxide, peroxyacetic acid, t-butyl hydroperoxide, 3-chloroperoxybenzoic acid and cumene hydroperoxide was studied by multi-mixing stopped-flow techniques. Hydroperoxides are decomposed by MPO by two mechanisms. Firstly, the hydroperoxide undergoes a two-electron reduction to its corresponding alcohol and heme iron is oxidized to compound I. At pH 7 and 15 degrees C, the rate constant of the reaction between 3-chloroperoxybenzoic acid and ferric MPO was similar to that with hydrogen peroxide (1.8x10(7) M(-1) s(-1) and 1.4x10(7) M(-1) s(-1), respectively). With the exception of t-butyl hydroperoxide, the rates of compound I formation varied between 5.2x10(5) M(-1) s(-1) and 2.7x10(6) M(-1) s(-1). Secondly, compound I can abstract hydrogen from these peroxides, producing peroxyl radicals and compound II. Compound I reduction is shown to be more than two orders of magnitude slower than compound I formation. Again, with 3-chloroperoxybenzoic acid this reaction is most effective (6. 6x10(4) M(-1) s(-1) at pH 7 and 15 degrees C). Both reactions are controlled by the same ionizable group (average pK(a) of about 4.0) which has to be in its conjugated base form for reaction.     

Spectral and kinetic studies on eosinophil peroxidase compounds I and II and their reaction with ascorbate and tyrosine.

Eosinophil peroxidase, the major granule protein in eosinophils, is the least studied human peroxidase. Here, we have performed spectral and kinetic measurements to study the nature of eosinophil peroxidase intermediates, compounds I and II, and their reduction by the endogenous one-electron donors ascorbate and tyrosine using the sequential-mixing stopped-flow technique. We demonstrate that the peroxidase cycle of eosinophil peroxidase involves a ferryl/porphyrin radical compound I and a ferryl compound II. In the absence of electron donors, compound I is shown to be transformed to a species with a compound II-like spectrum. In the presence of ascorbate or tyrosine compound I is reduced to compound II with a second-order rate constant of (1.0+/-0.2)x10(6) M(-1) s(-1) and (3.5+/-0.2)x10(5) M(-1) s(-1), respectively (pH 7.0, 15 degrees C). Compound II is then reduced by ascorbate and tyrosine to native enzyme with a second-order rate constant of (6.7+/-0.06)x10(3) M(-1) s(-1) and (2.7+/-0.06)x10(4) M(-1) s(-1), respectively. This study revealed that eosinophil peroxidase compounds I and II are able to react with tyrosine and ascorbate via one-electron oxidations and therefore generate monodehydroascorbate and tyrosyl radicals. The relatively fast rates of the compound I reduction demonstrate that these reactions may take place in vivo and are physiologically relevant.     

Mechanism of nitrite-stimulated catalysis by lactoperoxidase.

The reactions of lactoperoxidase (LPO) intermediates compound I, compound II and compound III, with nitrite (NO2(-)) were investigated. Reduction of compound I by NO2(-) was rapid (k2 = 2.3 x 10(7) M(-1) x s(-1); pH = 7.2) and compound II was not an intermediate, indicating that NO2* radicals are not produced when NO2(-) reacts with compound I. The second-order rate constant for the reaction of compound II with NO2(-) at pH = 7.2 was 3.5 x 10(5) M(-1) x s(-1). The reaction of compound III with NO2(-) exhibited saturation behaviour when the observed pseudo first-order rate constants were plotted against NO2(-) concentrations and could be quantitatively explained by the formation of a 1 : 1 ratio compound III/NO2(-) complex. The Km of compound III for NO2(-) was 1.7 x 10(-4) M and the first-order decay constant of the compound III/ NO2(-) complex was 12.5 +/- 0.6 s(-1). The second-order rate constant for the reaction of the complex with NO2(-) was 3.3 x 10(3) M(-1) x s(-1). Rate enhancement by NO2(-) does not require NO2* as a redox intermediate. NO2(-) accelerates the overall rate of catalysis by reducing compound II to the ferric state. With increasing levels of H2O2, there is an increased tendency for the catalytically dead-end intermediate compound III to form. Under these conditions, the 'rescue' reaction of NO2(-) with compound III to form compound II will maintain the peroxidatic cycle of the enzyme.     

Kinetics of interconversion of ferrous enzymes, compound II and compound III, of wild-type synechocystis catalase-peroxidase and Y249F: proposal for the catalatic mechanism

With the exception of catalase-peroxidases, heme peroxidases show no significant ability to oxidize hydrogen peroxide and are trapped and inactivated in the compound III form by H2O2 in the absence of one-electron donors. Interestingly, some KatG variants, which lost the catalatic activity, form compound III easily. Here, we compared the kinetics of interconversion of ferrous enzymes, compound II and compound III of wild-type Synechocystis KatG, the variant Y249F, and horseradish peroxidase (HRP). It is shown that dioxygen binding to ferrous KatG and Y249F is reversible and monophasic with apparent bimolecular rate constants of (1.2 +/- 0.3) x 10(5) M(-1) s(-1) and (1.6 +/- 0.2) x 10(5) M(-1) s(-1) (pH 7, 25 degrees C), similar to HRP. The dissociation constants (KD) of the ferrous-dioxygen were calculated to be 84 microm (wild-type KatG) and 129 microm (Y249F), higher than that in HRP (1.9 microm). Ferrous Y249F and HRP can also heterolytically cleave hydrogen peroxide, forming water and an oxoferryl-type compound II at similar rates ((2.4 +/- 0.3) x 10(5) M(-1) s(-1) and (1.1 +/- 0.2) x 10(5) M(-1) s(-1) (pH 7, 25 degrees C)). Significant differences were observed in the H2O2-mediated conversion of compound II to compound III as well as in the spectral features of compound II. When compared with HRP and other heme peroxidases, in Y249F, this reaction is significantly faster ((1.2 +/- 0.2) x 10(4) M(-1) s(-1))). Ferrous wild-type KatG was also rapidly converted by hydrogen peroxide in a two-phasic reaction via compound II to compound III (approximately 2.0 x 10(5) M(-1) s(-1)), the latter being also efficiently transformed to ferric KatG. These findings are discussed with respect to a proposed mechanism for the catalatic activity.     

A transient kinetic study on the reactivity of recombinant unprocessed monomeric myeloperoxidase

Spectral and kinetic features of the redox intermediates of human recombinant unprocessed monomeric myeloperoxidase (recMPO), purified from an engineered Chinese hamster ovary cell line, were studied by the multi-mixing stopped-flow technique. Both the ferric protein and compounds I and II showed essentially the same kinetic behavior as the mature dimeric protein (MPO) isolated from polymorphonuclear leukocytes. Firstly, hydrogen peroxide mediated both oxidation of ferric recMPO to compound I (1.9 x 10(7) M(-1) s(-1), pH 7 and 15 degrees C) and reduction of compound I to compound II (3.0 x 10(4) M(-1) s(-1), pH 7 and 15 degrees C). With chloride, bromide, iodide and thiocyanate compound I was reduced back to the ferric enzyme (3.6 x 10(4) M(-1) s(-1), 1.4 x 10(6) M(-1) s(-1), 1.4 x 10(7) M(-1) s(-1) and 1.4 x 10(7) M(-1) s(-1), respectively), whereas the endogenous one-electron donor ascorbate mediated transformation of compound I to compound II (2.3 x 10(5) M(-1) s(-1)) and of compound II back to the resting enzyme (5.0 x 10(3) M(-1) s(-1)). Comparing the data of this study with those known from the mature enzyme strongly suggests that the processing of the precursor enzyme (recMPO) into the mature form occurs without structural changes at the active site and that the subunits in the mature dimeric enzyme work independently.     

Oxidation of clozapine and ascorbate by myeloperoxidase.

The kinetics and spectra of the reactions of clozapine with compounds I and II of myeloperoxidase were investigated using both single- and sequential-mixing stopped-flow techniques, steady-state kinetics, and spectrophotometric measurements. The results show conclusively that both compounds I and II are reduced in one-electron reactions with clozapine. At pH 7.0 the rate constant for compound I reacting with clozapine is (1.5 +/- 0.1) x 10(6) M(-1) s(-1) and for compound II (4.8 +/- 0.1) x 10(4) M(-1) s(-1). The physiological pH of 7.4 was found to be optimal for the oxidation of clozapine by compound I. The rate constant for compound I reacting with ascorbate is (1.1 +/- 0.1) x 10(6) M(-1) s(-1) and for compound II (1.1 +/- 0.2) x 10(4) M(-1) s(-1), both obtained at pH 7.0. Experiments with both clozapine and ascorbate present showed that ascorbate acts both as a competitive inhibitor and free radical scavenger.     

Reactions of prostaglandin H synthase in the presence of the stabilizing agents diethyldithiocarbamate and glycerol

Both cyclooxygenase and peroxidase reactions of prostaglandin H synthase were studied in the presence and absence of diethyldithiocarbamate and glycerol at 4 degrees C in phosphate buffer (pH 8.0). Diethyldithiocarbamate reacts with the high oxidation state intermediates of prostaglandin H synthase; it protects the enzyme from bleaching and loss of activity by its ability to act as a reducing agent. For the reaction of diethyldithiocarbamate with compound I, the second-order rate constant k2,app, was found to fall within the range of 5.8 x 10(6) +/- 0.4 x 10(6) M-1.s-1 less than k2,app less than 1.8 x 10(7) +/- 0.1 x 10(7) M-1.s-1. The reaction of diethyldithiocarbamate with compound II showed saturation behavior suggesting enzyme-substrate complex formation, with kcat = 22 +/- 3 s-1, Km = 67 +/- 10 microM, and the second-order rate constant k3,app = 2.0 x 10(5) +/- 0.2 x 10(5) M-1.s-1. In the presence of both diethyldithiocarbamate and 30% glycerol, the parameters for compound II are kcat = 8.8 +/- 0.5 s-1, Km = 49 +/- 7 microM, and k3,app = 1.03 x 10(5) +/- 0.07 x 10(5) M-1.s-1. The spontaneous decay rate constants of compounds I and II (in the absence of diethyldithiocarbamate) are 83 +/- 5 and 0.52 +/- 0.05 s-1, respectively, in the absence of glycerol; in the presence of 30% glycerol they are 78 +/- 5 and 0.33 +/- 0.02 s-1, respectively. Neither cyclooxygenase activity nor the rate constant for compound I formation using 5-phenyl-4-pentenyl-1-hydroperoxide is altered by the presence of diethyldithiocarbamate.(ABSTRACT TRUNCATED AT 250 WORDS)     

Total conversion of bifunctional catalase-peroxidase (KatG) to monofunctional peroxidase by exchange of a conserved distal side tyrosine

Catalase-peroxidases (KatGs) are unique peroxidases exhibiting a high catalase activity and a peroxidase activity with a wide range of artificial electron donors. Exchange of tyrosine 249 in Synechocystis KatG, a distal side residue found in all as yet sequenced KatGs, had dramatic consequences on the bifunctional activity and the spectral features of the redox intermediate compound II. The Y249F variant lost catalase activity but retained a peroxidase activity (substrates o-dianisidine, pyrogallol, guaiacol, tyrosine, and ascorbate) similar to the wild-type protein. In contrast to wild-type KatG and similar to monofunctional peroxidases, the formation of the redox intermediate compound I could be followed spectroscopically even by addition of equimolar hydrogen peroxide to ferric Y249F. The corresponding bimolecular rate constant was determined to be (1.1 +/- 0.1) x 107 m-1 s-1 (pH 7 and 15 degrees C), which is typical for most peroxidases. Additionally, for the first time a clear transition of compound I to an oxoferryl-like compound II with peaks at 418, 530, and 558 nm was monitored when one-electron donors were added to compound I. Rate constants of reaction of compound I and compound II with tyrosine ((5.0 +/- 0.3) x 104 m-1 s-1 and (1.7 +/- 0.4) x 102 m-1 s-1) and ascorbate ((1.3 +/- 0.2) x 104 m-1 s-1 and (8.8 +/- 0.1) x 101 m-1 s-1 at pH 7 and 15 degrees C) were determined by using the sequential stopped-flow technique. The relevance of these findings is discussed with respect to the bifunctional activity of KatGs and the recently published first crystal structure.     

Role of the covalent glutamic acid 242-heme linkage in the formation and reactivity of redox intermediates of human myeloperoxidase

In human myeloperoxidase the heme is covalently attached to the protein via two ester linkages between the carboxyl groups of Glu242 and Asp94 and modified methyl groups on pyrrole rings A and C of the heme as well as a sulfonium ion linkage between the sulfur atom of Met243 and the beta-carbon of the vinyl group on pyrrole ring A. In the present study, wild-type recombinant myeloperoxidase (recMPO) and the variant Glu242Gln were produced in Chinese hamster ovary cells and investigated in a comparative sequential-mixing stopped-flow study in order to elucidate the role of the Glu242-heme ester linkage in the individual reaction steps of both the halogenation and peroxidase cycle. Disruption of the ester bond increased heme flexibility, blue shifted the UV-vis spectrum, and, compared with recMPO, decelerated cyanide binding (1.25 x 10(4) versus 1.6 x 10(6) M(-)(1) s(-)(1) at pH 7 and 25 degrees C) as well as compound I formation mediated by either hydrogen peroxide (7.8 x 10(5) versus 1.9 x 10(7) M(-)(1) s(-)(1)) or hypochlorous acid (7.5 x 10(5) versus 2.3 x 10(7) M(-)(1) s(-)(1)). The overall chlorination and bromination activity of Glu242Gln was 2.0% and 24% of recMPO. The apparent bimolecular rate constants of compound I reduction by chloride (65 M(-)(1) s(-)(1)), bromide (5.4 x 10(4) M(-)(1) s(-)(1)), iodide (6.4 x 10(5) M(-)(1) s(-)(1)), and thiocyanate (2.2 x10(5) M(-)(1) s(-)(1)) were 500, 25, 21, and 63 times decreased compared with recMPO. By contrast, Glu242Gln compound I reduction by tyrosine was only 5.4 times decreased, whereas tyrosine-mediated compound II reduction was 60 times slower compared with recMPO. The effects of exchange of Glu242 on electron transfer reactions are discussed.     

Manganese peroxidase from the lignin-degrading basidiomycete Phanerochaete chrysosporium. Transient state kinetics and reaction mechanism

Stopped-flow techniques were used to investigate the kinetics of the formation of manganese peroxidase compound I (MnPI) and of the reactions of MnPI and manganese peroxidase compound II (MnPII) with p-cresol and MnII. All of the rate data were obtained from single turnover experiments under pseudo-first order conditions. In the presence of H2O2 the formation of MnPI is independent of pH over the range 3.12-8.29 with a second-order rate constant of (2.0 +/- 0.1) x 10(6) M-1 s-1. The activation energy for MnPI formation is 20 kJ mol-1. MnPI formation also occurs with organic peroxides such as peracetic acid, m-chloroperoxybenzoic acid, and p-nitroperoxybenzoic acid with second-order rate constants of 9.7 x 10(5), 9.5 x 10(4), and 5.9 x 10(4) M-1 s-1, respectively. The reactions of MnPI and MnPII with p-cresol strictly obeyed second-order kinetics. The second-order rate constant for the reaction of MnPII with p-cresol is extremely low, (9.5 +/- 0.5) M-1 s-1. Kinetic analysis of the reaction of MnII with MnPI and MnPII showed a binding interaction with the oxidized enzymes which led to saturation kinetics. The first-order dissociation rate constants for the reaction of MnII with MnPI and MnPII are (0.7 +/- 0.1) and (0.14 +/- 0.01) s-1, respectively, when the reaction is conducted in lactate buffer. Rate constants are considerably lower when the reactions are conducted in succinate buffer. Single turnover experiments confirmed that MnII serves as an obligatory substrate for MnPII and that both oxidized forms of the enzyme form productive complexes with MnII. Finally, these results suggest the alpha-hydroxy acids such as lactate facilitate the dissociation of MnIII from the enzyme.