Capsule Design for Blue Light Therapy against Helicobacter pylori

A photo-medical capsule that emits blue light for Helicobacter pylori treatment was described in this paper. The system consists of modules for pH sensing and measuring, light-emitting diode driver circuit, radio communication and microcontroller, and power management. The system can differentiate locations by monitoring the pH values of the gastrointestinal tract, and turn on and off the blue light according to the preset range of pH values. Our experimental tests show that the capsule can operate in the effective light therapy mode for more than 32 minutes and the wireless communication module can reliably transmit the measured pH value to a receiver located outside the body.     

Synchronization with low power consumption of hardware models of cardiac cells

In a diffusively coupled system of mathematical models of cardiac cells, an acceleration phenomenon becomes apparent, with the period of the system becoming shorter than the periods of each isolated circuit. In order to investigate the energy or power consumption necessary to accelerate the oscillation of the coupled system, we propose an electronic circuit oscillator model for cardiac cells with the action potential presented by square waves with plateaus of different duration. When the durations of the plateaus of the isolated circuits were set at different values, while keeping the periods the same, the coupled system was accelerated. As a result the power consumption was reduced by the coupling. A requirement for the acceleration driven by the lowest power consumption was that the duty cycle of the coupled system be equal to 0.4. This duty cycle can be physiologically observed in living cardiac cell tissue. This suggests that cardiac cells are self-organized so as to accelerate through the coupling of cells while the total power consumption is reduced to the minimum state.     

Accelerated esterification of free fatty acid using pulsed microwaves

It was demonstrated that pulsed microwave irradiation is a more effective method to accelerate the esterification of free fatty acid with a heterogeneous catalyst than continuous microwave irradiation. A square-pulsed microwave with a 400 Hz repetition rate and a 10-20% duty cycle with the same energy as the continuous microwave were used in this study. The pulsed microwaves improved the esterification conversion from 39.9% to 66.1% after 15 min in comparison with the continuous microwave under the same reaction conditions. These results indicated that pulsed microwaves with repetitive strong power could enhance the efficiency of biodiesel production relative to the use of continuous microwave with mild power.     

A low power DC/DC booster circuit designed for microbial fuel cells

A DC/DC booster circuit was fabricated and tested for use with microbial fuel cells (MFCs) to increase the typical operational voltage (100–300 mV) to a maximum power of >3 V. In steady state, the low power DC/DC voltage booster circuit was sustainable, i.e., powered by the MFCs alone, but required an external power source to start (but not needed to maintain) the oscillator. The operating principle and function of each part of the circuit is described. A procedure for determining the optimal set of values for each component in the circuit was established. The performance of the circuit was demonstrated using three Shewanella oneidensis MR-1 based MFCs connected in parallel. The power consumption of the booster circuit was less than 20 μW, which was less than the output from the three MFCs. After the output capacitor was charged to 5 V, the booster circuit can be powered by the MFCs alone. Under normal operation, the MFCs were able to power the booster circuit and a light emitting diode.     

Voltage clamping with a single microelectrode.

A technique is described which allows neurons to be voltage clamped with a single microelectrode, and the advantages of this circuit with respect to conventional bridge techniques are discussed. In this circuit, the single microelectrode is rapidly switched from a current passing to a recording mode. The circuitry consists of: (1) an electronic switch; (2) a high impedance, ultralow input capacity amplifier; (3) a sample-and-hold module; (4) conventional voltage clamping circuitry. The closed electronic switch allows current to flow through the electrode. The switch then opens, and the electrode is in a recording mode. The low input capacity of the preamplifier allows the artifact from the current pulse to rapidly abate, after which time the circuit samples the membrane potential. This cycle is repeated at rates up to 10 kHz. The voltage clamping amplifier senses the output of the sample-and-hold module and adjusts the current pulse amplitude to maintain the desired membrane potential. The system was evaluated in Aplysia neurons by inserting two microelectrodes into a cell. One electrode was used to clamp the cell and the other to independently monitor membrane potential at a remote location in the soma.     

A quantitative model of the switch cycle of an archaeal flagellar motor and its sensory control

By reverse-engineering we have detected eight kinetic phases of the symmetric switch cycle of the Halobacterium salinarum flagellar motor assembly and identified those steps in the switch cycle that are controlled by sensory rhodopsins during phototaxis. Upon switching the rotational sense, the flagellar motor assembly passes through a stop state from which all subunits synchronously resume rotation in the reverse direction. The assembly then synchronously proceeds through three subsequent functional states of the switch: Refractory, Competent, and Active, from which the rotational sense is switched again. Sensory control of the symmetric switch cycle occurs at two steps in each rotational sense by inversely regulating the probabilities for a change from the Refractory to the Competent and from Competent to the Active rotational mode. We provide a mathematical model for flagellar motor switching and its sensory control, which is able to explain all tested experimental results on spontaneous and light-controlled motor switching, and give a mechanistic explanation based on synchronous conformational transitions of the subunits of the switch complex after reversible dissociation and binding of a response regulator (CheYP). We conclude that the kinetic mechanism of flagellar motor switching and its sensory control is fundamentally different in the archaeon H. salinarum and the bacterium Escherichia coli.     

Voltage clamping with a single microelectrode

A technique is described which allows neurons to be voltage clamped with a single microelectrode, and the advantages of this circuit with respect to conventional bridge techniques are discussed. In this circuit, the single micro electrode is rapidly switched from a current passing to a recording mode. The circuitry consists of: (1) an electronic switch; (2) a high impedance, ultralow input capacity amplifier; (3) a sample-and-hold module; (4) conventional voltage clamping circuitry. The closed electronic switch allows current to flow through the electrode. The switch then opens, and the electrode is in a recording mode. The low input capacity of the preamplifier allows the artifact from the current pulse to rapidly abate, after which time the circuit samples the membrane potential. This cycle is repeated at rates up to 10 kHz. The voltage clamping amplifier senses the output of the sample-and-hold module and adjusts the current pulse amplitude to maintain the desired membrane potential. The system was evaluated in Aplysia neurons by inserting two microelectrodes into a cell. One electrode was used to clamp the cell and the other to independently monitor membrane potential at a remote location in the soma.     

Functional Analysis of the Hydrophilic Loop in Intracellular Trafficking of Arabidopsis PIN-FORMED Proteins

Different PIN-FORMED proteins (PINs) contribute to intercellular and intracellular auxin transport, depending on their distinctive subcellular localizations. Arabidopsis thaliana PINs with a long hydrophilic loop (HL) (PIN1 to PIN4 and PIN7; long PINs) localize predominantly to the plasma membrane (PM), whereas short PINs (PIN5 and PIN8) localize predominantly to internal compartments. However, the subcellular localization of the short PINs has been observed mostly for PINs ectopically expressed in different cell types, and the role of the HL in PIN trafficking remains unclear. Here, we tested whether a long PIN-HL can provide its original molecular cues to a short PIN by transplanting the HL. The transplanted long PIN2-HL was sufficient for phosphorylation and PM trafficking of the chimeric PIN5:PIN2-HL but failed to provide the characteristic polarity of PIN2. Unlike previous observations, PIN5 showed clear PM localization in diverse cell types where PIN5 is natively or ectopically expressed and even polar PM localization in one cell type. Furthermore, in the root epidermis, the subcellular localization of PIN5 switched from PM to internal compartments according to the developmental stage. Our results suggest that the long PIN-HL is partially modular for the trafficking behavior of PINs and that the intracellular trafficking of PIN is plastic depending on cell type and developmental stage.     

Wideband LTE Power Amplifier with Integrated Novel Analog Pre-Distorter Linearizer for Mobile Wireless Communications

For the first time, a new circuit to extend the linear operation bandwidth of a LTE (Long Term Evolution) power amplifier, while delivering a high efficiency is implemented in less than 1 mm² chip area. The 950 µm × 900 µm monolithic microwave integrated circuit (MMIC) power amplifier (PA) is fabricated in a 2 µm InGaP/GaAs process. An on-chip analog pre-distorter (APD) is designed to improve the linearity of the PA, up to 20 MHz channel bandwidth. Intended for 1.95 GHz Band 1 LTE application, the PA satisfies adjacent channel leakage ratio (ACLR) and error vector magnitude (EVM) specifications for a wide LTE channel bandwidth of 20 MHz at a linear output power of 28 dBm with corresponding power added efficiency (PAE) of 52.3%. With a respective input and output return loss of 30 dB and 14 dB, the PA’s power gain is measured to be 32.5 dB while exhibiting an unconditional stability characteristic from DC up to 5 GHz. The proposed APD technique serves to be a good solution to improve linearity of a PA without sacrificing other critical performance metrics.     

Determination of the duty cycle of WLAN for realistic radio frequency electromagnetic field exposure assessment

Wireless Local Area Networks (WLANs) are commonly deployed in various environments. The WLAN data packets are not transmitted continuously but often worst-case exposure of WLAN is assessed, assuming 100% activity and leading to huge overestimations. Actual duty cycles of WLAN are thus of importance for time-averaging of exposure when checking compliance with international guidelines on limiting adverse health effects. In this paper, duty cycles of WLAN using Wi-Fi technology are determined for exposure assessment on large scale at 179 locations for different environments and activities (file transfer, video streaming, audio, surfing on the internet, etc.). The median duty cycle equals 1.4% and the 95th percentile is 10.4% (standard deviation SD = 6.4%). Largest duty cycles are observed in urban and industrial environments. For actual applications, the theoretical upper limit for the WLAN duty cycle is 69.8% and 94.7% for maximum and minimum physical data rate, respectively. For lower data rates, higher duty cycles will occur. Although counterintuitive at first sight, poor WLAN connections result in higher possible exposures. File transfer at maximum data rate results in median duty cycles of 47.6% (SD = 16%), while it results in median values of 91.5% (SD = 18%) at minimum data rate. Surfing and audio streaming are less intensively using the wireless medium and therefore have median duty cycles lower than 3.2% (SD = 0.5–7.5%). For a specific example, overestimations up to a factor 8 for electric fields occur, when considering 100% activity compared to realistic duty cycles.     

Intramolecular Movements in EF-G, Trapped at Different Stages in Its GTP Hydrolytic Cycle, Probed by FRET

Elongation factor G (EF-G) is one of several GTP hydrolytic proteins (GTPases) that cycles repeatedly on and off the ribosome during protein synthesis in bacterial cells. In the functional cycle of EF-G, hydrolysis of guanosine 5′-triphosphate (GTP) is coupled to tRNA-mRNA translocation in ribosomes. GTP hydrolysis induces conformational rearrangements in two switch elements in the G domain of EF-G and other GTPases. These switch elements are thought to initiate the cascade of events that lead to translocation and EF-G cycling between ribosomes. To further define the coupling mechanism, we developed a new fluorescent approach that can detect intramolecular movements in EF-G. We attached a fluorescent probe to the switch I element (sw1) of Escherichia coli EF-G. We monitored the position of the sw1 probe, relative to another fluorescent probe anchored to the GTP substrate or product, by measuring the distance-dependent, Förster resonance energy transfer between the two probes. By analyzing EF-G trapped at five different functional states in its cycle, we could infer the cyclical movements of sw1 within EF-G. Our results provide evidence for conformational changes in sw1, which help to drive the unidirectional EF-G cycle during protein synthesis. More generally, our approach might also serve to define the conformational dynamics of other GTPases with their cellular receptors.     

Phosphorylation switch modulates the interdigitated pattern of PIN1 localization and cell expansion in Arabidopsis leaf epidermis

Within a multicellular tissue cells may coordinately form a singular or multiple polar axes, but it is unclear whether a common mechanism governs different types of polar axis formation. The phosphorylation status of PIN proteins, which is directly affected by the PINOID (PID) protein kinase and the PP2A protein phosphatase, is known to regulate the apical-basal polarity of PIN localization in bipolar cells of roots and shoot apices. Here, we provide evidence that the phosphorylation status-mediated PIN polarity switch is widely used to modulate cellular processes in Arabidopsis including multipolar pavement cells (PC) with interdigitated lobes and indentations. The degree of PC interdigitation was greatly reduced either when the FYPP1 gene, which encodes a PP2A called phytochrome-associated serine/threonine protein phosphatase, was knocked out or when the PID gene was overexpressed (35S::PID). These genetic modifications caused PIN1 localization to switch from lobe to indentation regions. The PP2A and PID mediated switching of PIN1 localization is strikingly similar to their regulation of the apical-basal polarity switch of PIN proteins in other cells. Our findings suggest a common mechanism for the regulation of PIN1 polarity formation, a fundamental cellular process that is crucial for pattern formation both at the tissue/organ and cellular levels.     

Photosynthetic efficiency and oxygen evolution of Chlamydomonas reinhardtii under continuous and flashing light

As a result of mixing and light attenuation in a photobioreactor (PBR), microalgae experience light/dark (L/D) cycles that can enhance PBR efficiency. One parameter which characterizes L/D cycles is the duty cycle; it determines the time fraction algae spend in the light. The objective of this study was to determine the influence of different duty cycles on oxygen yield on absorbed light energy and photosynthetic oxygen evolution. Net oxygen evolution of Chlamydomonas reinhardtii was measured for four duty cycles (0.05, 0.1, 0.2, and 0.5) in a biological oxygen monitor (BOM). Oversaturating light flashes were applied in a square-wave fashion with four flash frequencies (5, 10, 50, and 100 Hz). Algae were precultivated in a turbidostat and acclimated to a low photon flux density (PFD). A photosynthesis–irradiance (PI) curve was measured under continuous illumination and used to calculate the net oxygen yield, which was maximal between a PFD of 100 and 200 μmol m^?2?s^?1. Net oxygen yield under flashing light was duty cycle-dependent: the highest yield was observed at a duty cycle of 0.1 (i.e., time-averaged PFD of 115 μmol m^?2?s^?1). At lower duty cycles, maintenance respiration reduced net oxygen yield. At higher duty cycles, photon absorption rate exceeded the maximal photon utilization rate, and, as a result, surplus light energy was dissipated which led to a reduction in net oxygen yield. This behavior was identical with the observation under continuous light. Based on these data, the optimal balance between oxygen yield and production rate can be determined to maximize PBR productivity.     

Action of Interferon: Kinetics and Differential Effects on Viral Functions

A highly purified rabbit interferon was tested for its capacity to inhibit various manifestations of infection of primary rabbit kidney (RK) cells with vesicular stomatitis (VS) virus. A kinetic analysis of the actinomycin-sensitive phase of interferon-induced cellular resistance revealed that RK cells could transcribe virtually all of the hypothetical antiviral messenger ribonucleic acid (mRNA) within 3 hr. Similar exposure to interferon reduced virus yield by 95 to 99% and markedly inhibited cytopathic effect on RK cells infected at a multiplicity of 10 or less. Interferon was less effective in blocking cytopathic effects when RK cells were infected at a multiplicity of 100. However, RK cells pretreated with the same amount of interferon and infected at a multiplicity of 100 failed to incorporate (3)H-amino acids into structural or nonstructural proteins of VS virus identified by polyacrylamide gel electrophoresis. Despite this inhibition of viral protein synthesis, interferon did not prevent the switch off by VS virus of cellular protein synthesis. The rapidity with which a high multiplicity of VS virus switched off cellular protein synthesis, even in cells rendered resistant to viral infection by interferon, is further evidence that this reaction is caused by an infecting virion component rather than by a newly synthesized viral product.     

An optically stabilized fast-switching light emitting diode as a light source for functional neuroimaging

Neuroscience research increasingly relies on optical methods for evoking neuronal activity as well as for measuring it, making bright and stable light sources critical building blocks of modern experimental setups. This paper presents a method to control the brightness of a high-power light emitting diode (LED) light source to an unprecedented level of stability. By continuously monitoring the actual light output of the LED with a photodiode and feeding the result back to the LED's driver by way of a proportional-integral controller, drift was reduced to as little as 0.007% per hour over a 12-h period, and short-term fluctuations to 0.005% root-mean-square over 10 seconds. The LED can be switched on and off completely within 100 μs, a feature that is crucial when visual stimuli and light for optical recording need to be interleaved to obtain artifact-free recordings. The utility of the system is demonstrated by recording visual responses in the central nervous system of the medicinal leech Hirudo verbana using voltage-sensitive dyes.     

The switching mechanism of the bacterial rotary motor combines tight regulation with inherent flexibility

Regulatory switches are wide spread in many biological systems. Uniquely among them, the switch of the bacterial flagellar motor is not an on/off switch but rather controls the motor’s direction of rotation in response to binding of the signaling protein CheY. Despite its extensive study, the molecular mechanism underlying this switch has remained largely unclear. Here, we resolved the functions of each of the three CheY‐binding sites at the switch in E. coli, as well as their different dependencies on phosphorylation and acetylation of CheY. Based on this, we propose that CheY motor switching activity is potentiated upon binding to the first site. Binding of potentiated CheY to the second site produces unstable switching and at the same time enables CheY binding to the third site, an event that stabilizes the switched state. Thereby, this mechanism exemplifies a unique combination of tight motor regulation with inherent switching flexibility.     

Detection of DNA via an ion channel switch biosensor

Detection of DNA by an ion channel switch biosensor has been demonstrated in a model system, using single-stranded oligonucleotide sequences of 52-84 bases in length. Two different biotinylated probes are bound, via streptavidin, either to the outer region of a gramicidin ion channel dimer or to an immobilized membrane component. The ion channels are switched off upon detection of DNA containing complementary epitopes to these probes, separated by a nonbinding region, at nanomolar levels. The DNA cross-links the ion channel to the immobilized species, preventing ions passing through the channel. Addition of DNase I after the target DNA has been added switches the ion channels on. The DNA response is dependent on the rate of hybridization of the individual probes to their complementary epitopes, as shown by using a single probe against DNA containing a repeat of the complementary epitope. These results were correlated with hybridization rates determined using surface plasmon resonance (BIAcore 2000), and with free energies of dimer formation for the probes.     

Up-regulation of matrix in bovine articular cartilage explants by electric fields

Electric stimulation has long been used as a tool to promote connective tissue healing, but the mechanism(s) by which this is accomplished are not yet known. We have previously determined, using mass cultures of fetal bovine articular chondrocytes, a specific set of capacitively coupled electrical stimulation parameters (e.g., duration of stimulation, response time, amplitude, frequency, and duty cycle) that significantly elevated production of collagen and proteoglycan, and up-regulated type II collagen and aggrecan mRNA expression in vitro. In the present study, we applied our best signal parameters (30-min continuous stimulation (100% duty cycle) followed by a pulsed (1h on, 5h off, 4x/day) 50% (1 min on, 1 min off) duty cycle) to cultures of adult bovine articular cartilage explants and obtained similar results. Since the latter system more closely mimics the in vivo chondrocyte environment, these data argue for the utility of electric stimulation for the maintenance of adult cartilage matrix in situ.     

Microwave influence on the isolated heart function: I. Effect of modulation

Dependence of the microwave effect on modulation parameters (pulse width, duty ratio, and peak intensity) was studied in an isolated frog auricle preparation. The rate and amplitude of spontaneous auricle twitches were measured during and after a 2 min exposure to 915 or 885 MHz microwaves and were compared to preexposure values. The studied ranges of modulation parameters were: pulse width, 10^?6–10^?2 s; duty ratio, 7:100000, and peak specific absorption rate, 100-3000 W/kg. Combinations of the parameters were chosen by chance, and about 400 various exposure regimes were tested. The experiments established that no regime was effective unless the average microwave power was high enough to induce preparation heating (0.1–0.4°C). The twitch rate instantly increased, and the amplitude decreased, as the temperature rose; similar changes could be induced by equivalent conventional heating. The data provide evidence that the effect of short-term microwave exposure on the isolated heart pacemaker and contractile functions depends on pulse modulation just as much as modulation determines the average absorbed power. These functions demonstrated no specific dependence on exposure parameters such as frequency or power windows. © 1995 Wiley-Liss, Inc.