余弦形负载超声变幅杆的设计与研究

研究余弦形负载超声变幅杆特性。求解了加负载时四种超声变幅杆的输入阻抗,得到加负载时输入阻抗和Mbius变换参数的统一算式。当变幅杆的输入抗分量为零时,计算了余弦形负载变幅杆的纵向振动共振频率方程和放大系数。由输入阻抗的表达式讨论了此类变幅杆的工作稳定性条件和相对阻抗相等点。结果表明由两种方法计算的共振频率方程是相同的;余弦形变幅杆的各种参量和方程与负载阻抗紧密相关;有负载力阻时1/4波长变幅杆的放大系数要比1/2波长变幅杆显著的多,和杆两端特性阻抗的几何平均值成正比,而与负载力组成反比。     

余弦形负载超声变幅杆的设计与研究

研究余弦形负载超声变幅杆特性.求解了加负载时四种超声变幅杆的输入阻抗,得到加负载时输入阻抗和Mbius变换参数的统一算式.当变幅杆的输入抗分量为零时,计算了余弦形负载变幅杆的纵向振动共振频率方程和放大系数.由输入阻抗的表达式讨论了此类变幅杆的工作稳定性条件和相对阻抗相等点.结果表明由两种方法计算的共振频率方程是相同的;余弦形变幅杆的各种参量和方程与负载阻抗紧密相关;有负载力阻时1/4波长变幅杆的放大系数要比1/2波长变幅杆显著的多,和杆两端特性阻抗的几何平均值成正比,而与负载力组成反比.     

Computer-controlled portable stimulator for paraplegic patients

A six-channel lightweight, portable and computer-controlled stimulator for the functional activation of paraplegic patients is described. To enable programming of the various functions, the stimulator was designed to work in a remote-control mode hosted by an IBM PC or compatible computer, in addition to its normally used local mode. The stimulus parameters, including current intensity, stimulus frequency and pulse width, are individually adjustable and programmable for each channel. The power source is 12 V 500 mAh⁻¹, from 10 rechargeable nickel cadmium batteries, with a run time of 1.5 h for a load of 200 mA in four channels. Various training programmes for the activation of paraplegics in the sitting, standing and walking positions are described. The final design of the stimulator is based on experience gained from 25 patients, treated and evaluated during the course of development. Ongoing work including clinical, biomechanical and physiological studies is carried out to evaluate performance of the activated patients and to optimize stimulation.     

Dynamic Impedance Model of the Skin-Electrode Interface for Transcutaneous Electrical Stimulation

Transcutaneous electrical stimulation can depolarize nerve or muscle cells applying impulses through electrodes attached on the skin. For these applications, the electrode-skin impedance is an important factor which influences effectiveness. Various models describe the interface using constant or current-depending resistive-capacitive equivalent circuit. Here, we develop a dynamic impedance model valid for a wide range stimulation intensities. The model considers electroporation and charge-dependent effects to describe the impedance variation, which allows to describe high-charge pulses. The parameters were adjusted based on rectangular, biphasic stimulation pulses generated by a stimulator, providing optionally current or voltage-controlled impulses, and applied through electrodes of different sizes. Both control methods deliver a different electrical field to the tissue, which is constant throughout the impulse duration for current-controlled mode or have a very current peak for voltage-controlled. The results show a predominant dependence in the current intensity in the case of both stimulation techniques that allows to keep a simple model. A verification simulation using the proposed dynamic model shows coefficient of determination of around 0.99 in both stimulation types. The presented method for fitting electrode-skin impedance can be simple extended to other stimulation waveforms and electrode configuration. Therefore, it can be embedded in optimization algorithms for designing electrical stimulation applications even for pulses with high charges and high current spikes.     

A Universal Strategy for Improving the Energy Transmission Efficiency and Load Power of Triboelectric Nanogenerators

Triboelectric nanogenerators (TENGs) have recently been invented as a potential energy technology for harvesting low‐frequency mechanical energy. The load power acquired from a TENG is far less than the maximum output power of the TENG for the large internal impedance and impedance mismatch, and this difference results in an extremely low energy transmission efficiency. Here, a universal strategy is proposed for improving the energy transmission efficiency and load power through dielectric material design, including a reduction in the effective thickness and the directional alignment of the electric dipole. This strategy reduces the internal impedances of TENGs with different modes and results in the improvement of energy transmission efficiency and load power. According to this strategy, the internal impedance of an as‐fabricated TENG is reduced from 16 to 1.3 MΩ, and the energy transmission efficiency is enhanced from 22.46% to 99.5%. Moreover, the load power under 1 MΩ resistance is improved from 0.014 to 0.251 µW, an increase of 18 times. The strategy not only opens a universal and new road to power management, but also paves the way for the industrial applications of TENGs.     

Normalization of liver glucosylceramide levels in the "Gaucher" mouse by phosphatidylserine injection

A model of the human genetic disorder, Gaucher disease, can be rapidly generated in mice by the injection of emulsified glucosylceramide and an inhibitor of the lipid's hydrolase, conduritol B epoxide. The liver grows rapidly as it absorbs the load of lipid but the effect disappears as new glucosidase is formed and the load is hydrolyzed. This normalization process is accelerated by treatment with phosphatidylserine, which is a known stimulator of the enzyme. It is possible that injecting the phospholipid into Gaucher patients would have a therapeutic effect since it might help them utilize their residual glucosidase to destroy stored glycolipid.     

Improved frequency response of pneumotachometers by digital compensation

To measure impedance one measures or estimates flow, which is commonly done by measuring the pressure drop across a pneumotachometer. The frequency response characteristics of standard pneumotachometer/pressure transducers (PPT) limit their use to relatively low frequencies. Also, the frequency response of PPTs has been reported to be "load" dependent. Thus, the frequency response characteristics measured under "no-load" conditions, which theoretically could be used to compensate subsequent measurements, may not be appropriate for measurements made under loaded conditions. Another method of measuring impedance exists which depends on a reference impedance element other than a pneumotachometer. In this method, an oscillatory flow signal with known amplitude is generated and used to force the system being tested. Unlike PPTs, this oscillatory flow generator (OFG) is a closed system that allows measurements to be made only during breath holding. Our objective was to determine whether the frequency response of a PPT could be compensated using measurements made under no-load conditions, such that it accurately measured an impedance load. The frequency response of the PPT under no-load conditions was measured by the OFG and used to compensate the output of the PPT in subsequent impedance measurements. The compensated PPT was used to measure the impedance of a mechanical structure and the impedances of four human subjects. The impedances of the mechanical structure and the subjects were also measured using the OFG.(ABSTRACT TRUNCATED AT 250 WORDS)     

Optimal Workloop Energetics of Muscle-Actuated Systems: An Impedance Matching View

Integrative approaches to studying the coupled dynamics of skeletal muscles with their loads while under neural control have focused largely on questions pertaining to the postural and dynamical stability of animals and humans. Prior studies have focused on how the central nervous system actively modulates muscle mechanical impedance to generate and stabilize motion and posture. However, the question of whether muscle impedance properties can be neurally modulated to create favorable mechanical energetics, particularly in the context of periodic tasks, remains open. Through muscle stiffness tuning, we hypothesize that a pair of antagonist muscles acting against a common load may produce significantly more power synergistically than individually when impedance matching conditions are met between muscle and load. Since neurally modulated muscle stiffness contributes to the coupled muscle-load stiffness, we further anticipate that power-optimal oscillation frequencies will occur at frequencies greater than the natural frequency of the load. These hypotheses were evaluated computationally by applying optimal control methods to a bilinear muscle model, and also evaluated through in vitro measurements on frog Plantaris longus muscles acting individually and in pairs upon a mass-spring-damper load. We find a 7-fold increase in mechanical power when antagonist muscles act synergistically compared to individually at a frequency higher than the load natural frequency. These observed behaviors are interpreted in the context of resonance tuning and the engineering notion of impedance matching. These findings suggest that the central nervous system can adopt strategies to harness inherent muscle impedance in relation to external loads to attain favorable mechanical energetics.     

Aortic input impedance during Mueller maneuver: an evaluation of "effective length"

Aortic input impedance was calculated in seven subjects in the control state (normal reflection) and during the Mueller maneuver (increased reflection) to evaluate "effective arterial length" under altered physiological conditions. Regional foot-to-foot pulse wave velocities and pressure waveforms along the aorta were used to define an "apparent anatomic length" or distance to a dominant discrete site of reflection "seen" by the ejecting ventricle. Time of wave travel was taken to be one-half the interval from the foot of the incident wave to the midsystolic inflection point. Knowing the time of travel from the returning reflection and velocity, distances calculated to the "apparent anatomic length" were 35 +/- 2 and 34 +/- 2 during control and Mueller maneuver, respectively (P = NS). The frequency of the first minimum of the modulus (fmin) and the first zero crossing of the phase angle (f phi) were determined from the input impedance spectra. During baseline conditions, fmin (3.9 +/- 0.2 Hz) approximately equaled f phi (4.2 +/- 0.2 Hz), and the resulting "effective lengths" calculated using the quarter-wavelength formula were similar to the apparent anatomic length. These data suggested that the aortic region incorporating the renal arterial branches as a site of discrete reflection and that terminal load was not significantly frequency dependent. During Mueller maneuver, however, f min (3.3 +/- 0.2 Hz) and f phi (5.1 +/- 0.2 Hz) were significantly discordant, the terminal load became strongly frequency dependent, and effective length calculated from f min was dissimilar (P less than 0.05) from the unchanged apparent anatomic length.(ABSTRACT TRUNCATED AT 250 WORDS)     

Microelectrode Guided Implantation of Electrodes into the Subthalamic Nucleus of Rats for Long-term Deep Brain Stimulation

Deep brain stimulation (DBS) is a widely used and effective therapy for several neurologic disorders, such as idiopathic Parkinson’s disease, dystonia or tremor. DBS is based on the delivery of electrical stimuli to specific deep anatomic structures of the central nervous system. However, the mechanisms underlying the effect of DBS remain enigmatic. This has led to an interest in investigating the impact of DBS in animal models, especially in rats. As DBS is a long-term therapy, research should be focused on molecular-genetic changes of neural circuits that occur several weeks after DBS. Long-term DBS in rats is challenging because the rats move around in their cage, which causes problems in keeping in place the wire leading from the head of the animal to the stimulator. Furthermore, target structures for stimulation in the rat brain are small and therefore electrodes cannot easily be placed at the required position. Thus, a set-up for long-lasting stimulation of rats using platinum/iridium electrodes with an impedance of about 1 MΩ was developed for this study. An electrode with these specifications allows for not only adequate stimulation but also recording of deep brain structures to identify the target area for DBS. In our set-up, an electrode with a plug for the wire was embedded in dental cement with four anchoring screws secured onto the skull. The wire from the plug to the stimulator was protected by a stainless-steel spring. A swivel was connected to the circuit to prevent the wire from becoming tangled. Overall, this stimulation set-up offers a high degree of free mobility for the rat and enables the head plug, as well as the wire connection between the plug and the stimulator, to retain long-lasting strength.     

Blood glucose and insulin levels in thymectomized rats.

The rise of blood glucose level under sugar load was much greater in thymectomized than in normal rats, whereas the insulin level remained practically unchanged. This suggests that the rise of blood sugar level is due to two factors, one being the accumulation in blood of a substance, corresponding to the blood glucose level stimulator stored in the thymus, the other the simultaneous inhibition of insulin production, or of insulin transport, into blood.     

Carotid sinus nerve stimulation in the management of intractable angina pectoris: four-year follow-up

Since February 1969 carotid sinus nerve stimulators have been implanted in 13 patients with intractable, incapacitating angina pectoris, unrelieved by medical management and, in some cases, revascularization procedures. Four patients died, one on the third postoperative day, the others at 15, 31 and 49 months postoperatively. Two other patients sustained myocardial infarcts, at two weeks and two months postoperatively. Complications were few and transient. The condition of two patients is now deteriorating.In all cases there was relief of pain and a decrease in blood pressure and heart rate. Exercise could be performed at a heavier load or for a longer time. Use of the stimulator was both intermittent and continuous, proving especially valuable in the relief of nocturnal angina. All patients were markedly improved and able to leave hospital.Four patients underwent aortocoronary bypass 14, 15, 22 and 28 months after implantation of the device; three obtained good results and no longer require the CSNS although it remains in place. The fourth obtained little improvement and continues to use the stimulator.     

Trinitrobenzoylated poly(D-lysine) as a stimulator of interactions between plasminogen, plasmin, and tissue-type plasminogen activator

Trinitrobenzyl alkylation of poly(D-lysine) provides a novel powerful stimulator of tissue-type plasminogen activator. Its stimulatory effect on plasminogen activation is far greater than that of the original poly(D-lysine), and even surpasses that of fibrin. Its effect on plasmin-catalysed modification of both tissue-type plasminogen activator (t-PA) and native (Glu-1-) plasminogen are also investigated. Cleavage of one-chain t-PA to its two-chain form is monitored by measuring the increase in amidolytic activity which accompanies this transformation. Presupposing apparent first-order reaction kinetics, a theory is developed by which the rate constant, kcat/Km = 1.0 X 10(6) M-1 X s-1 of plasmin cleavage of one-chain t-PA can be calculated. Plasmin-catalysed transformation of 125I-labelled Glu-1- to Lys-77-plasminogen is quantified following separation by polyacrylamide gel electrophoresis at pH 3.2. A rate constant, kcat/Km = 4.4 X 10(3) M-1 X s-1 is obtained for the reaction between plasmin and Glu-1-plasminogen in the presence of 1 mM trans-4-(aminomethyl)cyclohexane-1-carboxylic acid. Both of the above plasmin-catalysed reactions are strongly enhanced by trinitrobenzoylated poly(D-lysine). The mechanism of action of this stimulator is elucidated by studying its binding to both activator and plasmin(ogen), and by direct comparison of the results with measurements of plasminogen activation kinetics in the presence of the stimulator. Binding studies are performed exploiting the observation that an insoluble yellow complex is formed between plasminogen and modified poly(D-lysine). Protein-polymer interactions are also studied with solubilised components in an aqueous two-phase partition system containing dextran and poly(ethylene glycol). The rate enhancement of plasminogen activation is found to be closely correlated to the association of plasminogen to the stimulator. It is proposed that the stimulator effects of this simple polymer on the enzymatic activities of both plasminogen activator and plasmin are brought about by association of the proteinase and its substrate to a common matrix. Similarities between the action of the artificial and the natural stimulator (fibrin) are stressed. These properties of trinitrobenzoylated poly(D-lysine) makes it useful as a model for the study of the regulatory mechanism of the fibrinolytic process at the molecular level.     

The effect of mechanical impedance on root growth in pea (Pisum sativum). I. Rates of cell flux, mitosis, and strain during recovery

We studied the effect of mechanical impedance on cell flux and meristematic activity in pea roots. Pea seedlings ( Pisum sativum L. cv. Helka) were grown in cores of sand packed to dry bulk densities of either; 1.4 Mg m⁻³ with an additional 2.4 kg uniaxial load applied to the surface to increase the mechanical resistance to growth (penetration resistance of 1.5 MPa); or 1.0 Mg m⁻³ (penetration resistance of 0.05 MPa). A water content of 0.06 g g⁻¹ was chosen for optimum root growth. After 3 days, the seedlings were transferred to hydroponics, colchicine was added and the rate of cell doubling, mitotic index and length of the cell cycle was assessed. Cell flux in the third cortical layer was calculated for roots immediately removed from sand.Mechanical impedance slowed root extension to about 20% of the unimpeded rate, and final cell length was reduced to 50% of the unimpeded length. The rate of cell doubling was 3.4 times slower for roots recovering from mechanical impedance mostly as a result of a longer period spent in interphase. Cell flux in impeded roots was approximately half that of unimpeded roots (5 cells h⁻¹), and contributed to a shorter cell file and elongation zone, and a slower rate of root elongation.     

Pulse transmission and impedance characteristics of a non-uniform circulatory model

In recent years, the technique of non-uniform transmission lines has been utilized in the synthesis of lines feeding antennae from transmitters, thereby maintaining matching over a wide band of frequencies and with varying load. For this reason, an electrical model based on that technique stems from the resemblance between the two systems: in both the feeding medium is non-uniform, and it is necessary to maintain a good response over a wide range of frequencies. Our non-uniform transmission line model of the arterial system, introduced in an earlier publication, supplies comprehensive answers to many questions dealing with the research into this system. Whereas in our earlier model the ohmic resistance R was considered small and not considered in the calculations, it is included in the present study. We have calculated the variation of the input impedance with the frequency and distance from the source, the effect of occluded main branches, augmentation of the pressure wave, the relationship between body size and heart rate and the matching of impedances at large bifurcations. We found that our calculated results agree very well with the quantitative results measured by other investigators in the field.     

Assessing the numerical accuracy of the impedance method

The impedance method has been used extensively to calculate induced electric fields and currents in tissue as a result of applied electromagnetic fields. However, there has previously been no known method for an a priori assessment of the numerical accuracy of the results found by this method. Here, we present a method which permits an a priori assessment of the numerical accuracy of the impedance method applied to physiologically meaningful problems in bioengineering. The assessment method relies on estimating the condition number associated with the impedance matrix for problems with varying shapes, sizes, conductivities, anisotropies, and implementation strategies. Equations have been provided which predict the number of significant figures lost due to poor matrix conditioning as a function of these variables. The results show that, for problems of moderate size and uncomplicated geometry, applied fields should be measured or calculated accurately to at least five or six significant figures. As resolutions are increased and material properties are more widely divergent even more significant figures are needed. The equations provided here should ensure that solutions found from the impedance method are calculated accurately.     

Melphalan-induced enhancement of tumor cell immunostimulatory capacity as a mechanism for the appearance of potent antitumor immunity in the spleen of mice bearing a large metastatic MOPC-315 tumor

Summary Exposure of MOPC-315 cells from the primary tumor nodule to a low concentration (0.5 nmol/ml) of melphalan (L-phenylalanine mustard; L-PAM) rendered the tumor cells capable of bringing about the generation of a potent primary antitumor cytotoxic response. Accordingly, the level of antitumor cytotoxicity generated by normal spleen cells immunized in vitro with L-PAM-treated tumor cells was at least five-fold greater than the level generated in response to untreated tumor cells. The marked superiority of L-PAM-treated tumor cells over untreated tumor cells in bringing about the generation of antitumor cytotoxicity was evident over a wide range of responder to stimulator cell ratios. The higher level of antitumor cytotoxicity exhibited by normal spleen cells immunized with L-PAM-treated tumor cells as compared with untreated tumor cells was not merely the result of direct drug-mediated tumoricidal activity, thereby reducing the number of tumor cells present which can act as cold target cell inhibitors during the ⁵¹Cr release assay. This is apparent from the observation that the level of antitumor cytotoxicity generated in response to a given percentage of stimulator tumor cells pretreated with 0.5 nmol L-PAM/ml, a drug concentration associated with retention of 60% tumor cell proliferative capacity, is substantially greater than that generated in response to less than half that percentage of untreated stimulator tumor cells. Moreover, stimulator tumor cells exposed to a fully antiproliferative concentration of L-PAM brought about the generation of a higher level of antitumor cytotoxicity than stimulator tumor cells exposed to mitomycin C at a concentration which inhibited the proliferation of the tumor cells to the same extent as the L-PAM. A low concentration of L-PAM which was effective in rendering isolated tumor cells from the primary tumor nodule capable of bringing about the generation of antitumor cytotoxicity was also effective in inducing the appearance of potent antitumor immune potential in tumor bearer splenic cells containing metastatic tumor cells. Thus, metastatic tumor cells within the spleen of tumor-bearing mice may have the potential to act as in situ stimulators for the generation of potent antitumor immunity which brings about the eradication of a large, metastatic tumorigenic load remaining after clearance of the drug from the circulation.Supported by United States Public Health Service Research Grants CA-30088 and CA-35761 from the National Cancer InstituteIn partial fulfillment of the requirements of the Graduate College for the Doctor of Philosophy degree for RCBSBE was visiting Fulbright Professor from the Department of Human Microbiology, Sackler School of Medicine, Tel Aviv University, Israel, and was supported by the Council for International Exchange of Scholars     

Regulation of Mg2+-independent Ca2+-ATPase by a low molecular mass protein purified from bovine brain

The goat sperm microsomal membranes have been found to contain an Mg2+-independent Ca2+-ATPase, a low affinity but highly active enzyme sharing similarities with the SERCA family of ATPases. The present study reports the identification and characterization of a 14 kilodalton cytosolic protein from bovine brain which can act as an endogenous stimulator of the enzyme with an S50 (concentration producing 50% stimulation) of 0.8 mu molar. Kinetic analysis suggests that the stimulation is noncompetitive with respect to the substrate, and the binding site(s) of the stimulator and substrate are distinct. Binding of the stimulator to the enzyme is reversible. The stimulator increases the affinity of the enzyme for calcium as evident from a decrease in K0.5 of the enzyme for calcium in presence of the stimulator. Radioactive labeling of the enzyme with [gamma-32P]-ATP suggests that the stimulator enhances the rate of dephosphorylation of the phosphoenzyme intermediate without altering the phosphorylation reaction step. The stimulatory effect of the protein has been observed only for the Mg2+-independent form of the enzyme, the Mg2+-dependent form being unaffected.     

Characterization of a low-molecular-mass stimulator protein of Mg2+-independent Ca2+-ATPase: effect on phosphorylation/dephosphorylation, calcium transport and sperm-cell motility

A 14 kDa cytosolic protein purified from bovine brain homogenate has been recently reported as a stimulator of goat spermatozoa Mg2+-independent Ca2+-ATPase. In the present study, we demonstrate the formation of the [gamma-32P]ATP-labelled phosphoenzyme as the 110 kDa phosphoprotein and its rapid decomposition in presence of the stimulator protein. Together with the cross-reactivity of this 110 kDa protein with an anti-SERCA (sarcoplasmic/endoplasmic reticulum Ca2+-ATPase) 2a antibody, the ATPase can now be conclusively said to belong to the SERCA family, which is activated by the stimulator. The ability of the stimulator to enhance the Ca2+ transport has been elucidated from 45Ca2+ uptake studies and was found to be sensitive to Ca2+ channel blockers. CD revealed an alpha-helical structure of the stimulator. The amino acid analysis suggests that it is composed primarily of hydrophobic and some acidic amino acid residues. The pI of 5.1 has been re-confirmed from two-dimensional electrophoresis. Immuno-cross-reactivity studies indicate that the stimulator or similar proteins are present in cytosolic fractions of liver, kidney or testes in different species, but brain is the richest source. Proteomic analyses of its trypsinized fragments suggest its similarity with bovine THRP (thyroid hormone-responsive protein). The physiological significance of the stimulator has been suggested from its ability to activate sperm-cell motility.     

Hydraulic input impedance measurements in physical models of the arterial wall

A white noise method was used to measure the hydraulic input impedance and transmission characteristics in physical models of an arterial system made of single, unbranched latex tubes. The experimentally obtained impedance curves show a rise in modulus and a positive phase at high frequencies in the absence of wave reflections. Using the impedance moduli in the presence of wave reflections, wave velocity and attenuation were calculated. The influence of wall nonlinearity on hydraulic impedance was also examined. It is concluded that, in the model used neither wave reflections nor wall nonlinearity can account for the deviations of the experimental impedance curves from the theoretically predicted ones. Impedance moduli in the presence of reflections may be used to study transmission characteristics (wave velocity and attenuation) of the model.