Physico-chemical basis of RecA nucleo-protein filament formation on single

The analysis of RecA protein playing a central role in homologous recombination of E. coli with single-stranded DNAs of various structure and length on quantitative level is carried out for the first time. It was shown that weak additive interactions between protein monomers of filament and different structural elements of DNA provide DNA recognition. Orthophosphate and dNMPs (I50 = 12-20 mM) were shown to be the minimal inhibitors of RecA filamentation on d(pN)20. The lengthening of homooligonucleotides from d(pN)2 to d(pN)20 by one unit leads to monotonic increase in the affinity by a factor approximately 2 (factor f) due to weak additive contacts of RecA with every internucleoside phosphate group of DNA (f = 1.56) and specific interactions with each of T and C bases (f = 1.32). RecA filament does not practically interact with bases of d(pA)n, but contacts with internucleoside phosphate groups of the first turn (n < 10; f = 2.1) more effective than with additional turns of d(pA)n (n > 10; f = 1.3). The affinity of RecA protein for d(pN)n, containing typical and a number of different modified bases depends on a type of base, peculiarities of DNA structure and conformation of its sugar-phosphate backbone. The affinity is increased significantly if the bases contain exocyclic proton accepting groups. The possible reasons of preferable complexation of RecA with DNA of definite structure and length are analyzed. The mechanism of single-stranded DNA recognition by RecA and hypothetical mechanism of homological DNA strands exchange are proposed.     

Physicochemical Basis of RecA Filamentation on Single-Stranded DNA

Quantitative analysis was performed for the first time for the interaction of Escherichia coli RecA, which plays the central role in homologous recombination, and ssDNA varying in length and structure. DNA recognition was shown to depend on weak additive interactions between RecA monomers of the filament and various structural elements of DNA. Orthophosphate and dNMPs acted as minimal inhibitors of RecA filamentation on d(pN)₂₀. A stepwise increase in homooligonucleotide length by one nucleotide (from 2 to 20 nt) monotonically increased the affinity approximately twofold (factor f) due to weak additive contacts of RecA with each internucleoside phosphate (f ≈ 1.56) and specific interactions with T and C (f ≈ 1.32). In the case of d(pA) _n , the RecA filament showed virtually no interaction with bases and interacted more efficiently with internucleoside phosphates of the first than of the next helix turn (n < 10, f ≈ 2.1 vs. n > 10, f ≈ 1.3). The affinity of RecA for d(pN) _n and various modified bases proved to depend on the base, the DNA structure, and the conformation of the sugar-phosphate backbone. The affinity considerably increased with bases containing exocyclic proton-accepting groups. Possible causes of the preferential binding of RecA with DNAs of a particular length and composition are considered. Mechanisms are proposed for ssDNA recognition by RecA and for homologous strand exchange.     

Interaction of single-stranded DNA with the second DNA-binding site of RecA nucleoprotein filament

RecA protein first forms filament on single-stranded (ss) DNA forming the first DNA-binding site for interaction with this ssDNA a formation of the second site for interaction with double-stranded DNA occurs in parallel. Then the formed nucleoprotein filament interacts with molecules of double-stranded (ds) DNA but can also recognize ssDNA. The formed complex realizes a search of homology and exchange of homologous strands. We have studied recently the mechanism of RecA filamentation on ssDNA. Here a study of interaction of different DNAs with the second site of RecA filament using a method of stepwise increase of the ligand complicity was performed. The second site under recognition interacts with every nucleotide units of DNA-ligand forming contact with both internucleotide phosphate groups and bases of DNA. Pyrimidinic d(pC)n [Russian character: see text d(pT)n oligonucleotides interact with the second site of the RecA filament more effectively than with d(pA)n oligonucleotides. This occurs due to a more effective interaction of the RecA filament with 5'-terminal unit of pyrimidinic DNAs and to a difference in specific conformational changes of nucleoprotein filaments in the complex with purinic and pyrimidinic DNAs. A comparison of thermodynamic characteristics of DNA recognition by the first and the second sites of DNA recognition is carried out. It was shown that at n >10 d(pC)n d(pN)n interact with the second site weaker, that with the first site. The complexation of the second site with d(pA)n at n >20 is more effective than with the first site. The difference in the affinity of d(pA)n to the fist and second sites is increased monotonically with the enhancement of their length. Possible mechanisms of RecA-dependent search of homology and strand exchange are discussed.     

Interaction of single-stranded DNA with the second DNA-binding site of the RecA nucleoprotein filament

RecA first forms a filament on single-stranded DNA (ssDNA), thereby forming the first site for ssDNA binding and, simultaneously, the second site for binding double-stranded DNA (dsDNA). Then, the nucleoprotein filament interacts with dsDNA, although it can bind ssDNA as well. The resulting complex searches for homology sites and performs strand exchange between homologous DNA molecules. The interaction of various ssDNAs with the second DNA-recognizing site of RecA was studied by gradually increasing the structural complexity of the DNA ligand. Recognizing ssDNA with the second site, the protein interacts with each nucleotide of the ligand, forming contacts with both internucleotide phosphate groups and nitrogen bases. Pyrimidine oligonucleotides d(pC) _n and d(pT) _n interacted with the second site of the RecA filament more efficiently than d(pA) _n did. This was due to a more efficient interaction of the RecA filament with the 5′-terminal nucleotide of pyrimidinic DNA and to the difference in specific conformational changes of the nucleoprotein filament in the presence of purinic and pyrimidinic DNAs. A comparison of thermodynamic characteristics of DNA recognition at the first and second DNA-binding sites of the filament showed that, at n > 10, d(pC) _n and d(pN) _n were bound at the second site less tightly than at the first site. At n > 20, the second site bound d(pA) _n more efficiently than the first site. The difference in d(pN) _n affinity for the first and second sites increased monotonically with increasing n. Possible mechanisms of a RecA-dependent search for homology and DNA strand exchange are discussed.     

Topological testing of the mechanism of homology search promoted by RecA protein

To initiate homologous recombination, sequence similarity between two DNA molecules must be searched for and homology recognized. How the search for and recognition of homology occurs remains unproven. We have examined the influences of DNA topology and the polarity of RecA–single-stranded (ss)DNA filaments on the formation of synaptic complexes promoted by RecA. Using two complementary methods and various ssDNA and duplex DNA molecules as substrates, we demonstrate that topological constraints on a small circular RecA–ssDNA filament prevent it from interwinding with its duplex DNA target at the homologous region. We were unable to detect homologous pairing between a circular RecA–ssDNA filament and its relaxed or supercoiled circular duplex DNA targets. However, the formation of synaptic complexes between an invading linear RecA–ssDNA filament and covalently closed circular duplex DNAs is promoted by supercoiling of the duplex DNA. The results imply that a triplex structure formed by non-Watson–Crick hydrogen bonding is unlikely to be an intermediate in homology searching promoted by RecA. Rather, a model in which RecA-mediated homology searching requires unwinding of the duplex DNA coupled with local strand exchange is the likely mechanism. Furthermore, we show that polarity of the invading RecA–ssDNA does not affect its ability to pair and interwind with its circular target duplex DNA.     

Modeling the early stage of DNA sequence recognition within RecA nucleoprotein filaments

Homologous recombination is a fundamental process enabling the repair of double-strand breaks with a high degree of fidelity. In prokaryotes, it is carried out by RecA nucleofilaments formed on single-stranded DNA (ssDNA). These filaments incorporate genomic sequences that are homologous to the ssDNA and exchange the homologous strands. Due to the highly dynamic character of this process and its rapid propagation along the filament, the sequence recognition and strand exchange mechanism remains unknown at the structural level. The recently published structure of the RecA/DNA filament active for recombination (Chen et al., Mechanism of homologous recombination from the RecA-ssDNA/dsDNA structure, Nature 2008, 453, 489) provides a starting point for new exploration of the system. Here, we investigate the possible geometries of association of the early encounter complex between RecA/ssDNA filament and double-stranded DNA (dsDNA). Due to the huge size of the system and its dense packing, we use a reduced representation for protein and DNA together with state-of-the-art molecular modeling methods, including systematic docking and virtual reality simulations. The results indicate that it is possible for the double-stranded DNA to access the RecA-bound ssDNA while initially retaining its Watson–Crick pairing. They emphasize the importance of RecA L2 loop mobility for both recognition and strand exchange.     

Electron microscopic visualization of the RecA protein-mediated pairing and branch migration phases of DNA strand exchange

The RecA protein of Escherichia coli will drive the pairing and exchange of strands between homologous DNA molecules in a reaction stimulated by single-stranded binding protein. Here, reactions utilizing three homologous DNA pairs which can undergo both paranemic and plectonemic joining were examined by electron microscopy: supertwisted double-stranded (ds) DNA and linear single-stranded (ss) DNA, linear dsDNA and circular ssDNA, and linear dsDNA and colinear ssDNA. Several major observations were: (i) with RecA protein bound to the DNA, plectonemic joints were ultrastructurally indistinguishable from paranemic joints; (ii) complexes which appeared to be joined both paranemically and plectonemically were present in these reactions in roughly equal numbers; and (iii) in complexes undergoing strand exchange, both DNA partners were often enveloped within a RecA protein filament consisting of hundreds of RecA protein monomers and several kilobases of DNA. These observations suggest that, following RecA protein-ssDNA filament formation, strand exchange proceeds by a pathway that can be divided structurally into three phases: pairing, envelopment/exchange, and release of the products.     

Mechanical force antagonizes the inhibitory effects of RecX on RecA filament formation in Mycobacterium tuberculosis

Efficient bacterial recombinational DNA repair involves rapid cycles of RecA filament assembly and disassembly. The RecX protein plays a crucial inhibitory role in RecA filament formation and stability. As the broken ends of DNA are tethered during homologous search, RecA filaments assembled at the ends are likely subject to force. In this work, we investigated the interplay between RecX and force on RecA filament formation and stability. Using magnetic tweezers, at single molecular level, we found that Mycobacterium tuberculosis (Mt) RecX could catalyze stepwise de-polymerization of preformed MtRecA filament in the presence of ATP hydrolysis at low forces (<7 pN). However, applying larger forces antagonized the inhibitory effects of MtRecX, and a partially de-polymerized MtRecA filament could re-polymerize in the presence of MtRecX, which cannot be explained by previous models. Theoretical analysis of force-dependent conformational free energies of naked ssDNA and RecA nucleoprotein filament suggests that mechanical force stabilizes RecA filament, which provides a possible mechanism for the observation. As the antagonizing effect of force on the inhibitory function of RecX takes place in a physiological range; these findings broadly suggest a potential mechanosensitive regulation during homologous recombination.     

Phe217 regulates the transfer of allosteric information across the subunit interface of the RecA protein filament

BACKGROUND: ATP-mediated cooperative assembly of a RecA nucleoprotein filament activates the protein for catalysis of DNA strand exchange. RecA is a classic allosterically regulated enzyme in that ATP binding results in a dramatic increase in ssDNA binding affinity. This increase in ssDNA binding affinity results almost exclusively from an ATP-mediated increase in cooperative filament assembly rather than an increase in the inherent affinity of monomeric RecA for DNA. Therefore, certain residues at the subunit interface must play an important role in transmitting allosteric information across the filament structure of RecA. RESULTS: Using electron microscopic analysis of RecA polymer formation in the absence of DNA, we show that while wild-type RecA undergoes a slight decrease in filament length in the presence of ATP, a Phe217Tyr substitution results in a dramatic ATP-induced increase in cooperative filament assembly. Biosensor DNA binding measurements reveal that the Phe217Tyr mutation increases ATP-mediated cooperative interaction between RecA subunits by more than 250-fold. CONCLUSIONS: These studies represent the first identification of a subunit interface residue in RecA (Phe217) that plays a critical role in regulating the flow of ATP-mediated information throughout the protein filament structure. We propose a model by which conformational changes that occur upon ATP binding are propagated through the structure of a RecA monomer, resulting in the insertion of the Phe217 side chain into a pocket in the neighboring subunit. This event serves as a key step in intersubunit communication leading to ATP-mediated cooperative filament assembly and high affinity binding to ssDNA.     

The poor homology stringency in the heteroduplex allows strand exchange to incorporate desirable mismatches without sacrificing recognition in vivo

RecA family proteins are responsible for homology search and strand exchange. In bacteria, homology search begins after RecA binds an initiating single-stranded DNA (ssDNA) in the primary DNA-binding site, forming the presynaptic filament. Once the filament is formed, it interrogates double-stranded DNA (dsDNA). During the interrogation, bases in the dsDNA attempt to form Watson–Crick bonds with the corresponding bases in the initiating strand. Mismatch dependent instability in the base pairing in the heteroduplex strand exchange product could provide stringent recognition; however, we present experimental and theoretical results suggesting that the heteroduplex stability is insensitive to mismatches. We also present data suggesting that an initial homology test of 8 contiguous bases rejects most interactions containing more than 1/8 mismatches without forming a detectable 20 bp product. We propose that, in vivo, the sparsity of accidental sequence matches allows an initial 8 bp test to rapidly reject almost all non-homologous sequences. We speculate that once the initial test is passed, the mismatch insensitive binding in the heteroduplex allows short mismatched regions to be incorporated in otherwise homologous strand exchange products even though sequences with less homology are eventually rejected.     

Conserved conformation of RecA protein after executing the DNA strand-exchange reaction. A site-specific linear dichroism structure study

RecA protein and its eukaryotic homologue Rad51 protein catalyzes the DNA strand exchange, which is a key reaction of homologous recombination. At the initial step of the reaction, RecA proteins form a helical filament on a single-stranded DNA (ssDNA). Binding of double-stranded DNA (dsDNA) to the filament triggers the homology search; as homology is found, the exchange of strands occurs, and the displaced DNA is released. These are the principal steps of genetic recombination; however, despite many years of extensive study of RecA activities, the details of the mechanism are still obscure. A high-resolution structure of the active nucleoprotein filament could provide information to help understand this process. Using a linear dichroism polarized-light spectroscopy technique, in combination with protein engineering (the site-specific linear dichroism method), we have previously studied the arrangement of RecA in complex with ssDNA. In the present study, we have used this approach to search for structural variations of RecA at the atomic level as the DNA in the complex is changed from ssDNA to dsDNA. The structural data of the RecA-dsDNA filament are found to be very similar to the data previously obtained for the RecA-ssDNA complex, indicating that the overall orientation and also the internal structure of RecA in the active filament are not markedly altered when the bound DNA changes from single- to double-stranded. The implications of the structural similarities as well as the significance of some conformational variations observed for a few amino acid residues that may be involved in interactions with DNA are discussed.     

The hRad51 and RecA proteins show significant differences in cooperative binding to single-stranded DNA.

The human Rad51 protein (hRad51), like its bacterial homologue RecA, catalyzes genetic recombination between homologous single and double-stranded DNA substrates. Using IAsys biosensor technology, we have examined the critical first step in this process, the binding of hRad51 and RecA to ssDNA. We show that hRad51 binds cooperatively and with high affinity to an oligonucleotide substrate in both the absence and presence of nucleotide cofactors. In fact, both ATP and ATPgammaS have a slight inhibitory effect on hRad51 binding affinity. We show that this results from a decrease in the intrinsic affinity of a given monomer for ssDNA, which is counterbalanced by an increase in the cooperative assembly of protein onto DNA. In contrast, we show that the dramatic NTP-induced increase in ssDNA binding affinity of RecA is accounted for by a significant increase in cooperative filament assembly and not by an increase in the intrinsic DNA binding affinity of monomeric RecA. These results demonstrate that although the hRad51 and RecA proteins display many structural and functional similarities, they show profound inherent mechanistic differences.     

Hallmarks of homology recognition by RecA-like recombinases are exhibited by the unrelated Escherichia coli RecT protein

Homologous recombination is a fundamental process for genome maintenance and evolution. Various proteins capable of performing homology recognition and pairing of DNA strands have been isolated from many organisms. The RecA family of proteins exhibits a number of biochemical properties that are considered hallmarks of homology recognition. Here, we investigated whether the unrelated Escherichia coli RecT protein, which mediates homologous pairing and strand exchange, also exhibits such properties. We found that, like RecA and known RecA homologs: (i) RecT promotes the co-aggregation of ssDNA with duplex DNA, which is known to facilitate homologous contacts; (ii) RecT binding to ssDNA mediates unstacking of the bases, a key step in homology recognition; (iii) RecT mediates the formation of a three-strand synaptic intermediate where pairing is facilitated by local helix destabilization, and the preferential switching of A:T base pairs mediates recognition of homology; and (iv) RecT-mediated pairing occurs from both 3'- and 5'-single-stranded ends. Taken together, our results show that RecT shares fundamental homology-recognition properties with the RecA homologs, and provide new insights on an underlying universal mechanism of homologous recognition.     

Genetic recombination in Bacillus subtilis: a division of labor between two single-strand DNA-binding proteins

We have investigated the structural, biochemical and cellular roles of the two single-stranded (ss) DNA-binding proteins from Bacillus subtilis, SsbA and SsbB. During transformation, SsbB localizes at the DNA entry pole where it binds and protects internalized ssDNA. The 2.8-Å resolution structure of SsbB bound to ssDNA reveals a similar overall protein architecture and ssDNA-binding surface to that of Escherichia coli SSB. SsbA, which binds ssDNA with higher affinity than SsbB, co-assembles onto SsbB-coated ssDNA and the two proteins inhibit ssDNA binding by the recombinase RecA. During chromosomal transformation, the RecA mediators RecO and DprA provide RecA access to ssDNA. Interestingly, RecO interaction with ssDNA-bound SsbA helps to dislodge both SsbA and SsbB from the DNA more efficiently than if the DNA is coated only with SsbA. Once RecA is nucleated onto the ssDNA, RecA filament elongation displaces SsbA and SsbB and enables RecA-mediated DNA strand exchange. During plasmid transformation, RecO localizes to the entry pole and catalyzes annealing of SsbA- or SsbA/SsbB-coated complementary ssDNAs to form duplex DNA with ssDNA tails. Our results provide a mechanistic framework for rationalizing the coordinated events modulated by SsbA, SsbB and RecO that are crucial for RecA-dependent chromosomal transformation and RecA-independent plasmid transformation.     

Structure of helical RecA-DNA complexes. Complexes formed in the presence of ATP-gamma-S or ATP

Electron micrographs of RecA-DNA filaments, formed under several different conditions, have been analyzed and the filament images reconstructed in three dimensions. In the presence of ATP and a non-hydrolyzable ATP analog. ATP-gamma-S, the RecA protein forms with DNA a right-handed helical complex with a pitch of approximately 95 A. The most detailed view of the filament was obtained from analysis of RecA filaments on double-stranded DNA in the presence of ATP-gamma-S. There are approximately six subunits of RecA per turn of the helix, but both this number and the pitch are variable. From the examination of single filaments and filament-filament interactions, a picture of an extremely flexible protein structure emerges. The subunits of RecA protein are seen to be arranged in such a manner that the bound DNA must be partially exposed and able to come into contact with external DNA molecules. The RecA structure determined in the presence of ATP-gamma-S appears to be the same as the "pre-synaptic" state that occurs with ATP, in which there is recognition and pairing between homologous DNA molecules.     

The mutant RecA proteins, RecAR243Q and RecAK245N, exhibit defective DNA binding in homologous pairing

In homologous pairing, the RecA protein sequentially binds to single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA), aligning the two DNA molecules within the helical nucleoprotein filament. To identify the DNA binding region, which stretches from the outside to the inside of the filament, we constructed two mutant RecA proteins, RecAR243Q and RecAK245N, with the amino acid substitutions of Arg243 to Gln and Lys245 to Asn, respectively. These amino acids are exposed to the solvent in the crystal structure of the RecA protein and are located in the central domain, which is believed to be the catalytic center of the homologous pairing activity. The mutations of Arg243 to Gln (RecAR243Q) and Lys245 to Asn (RecAK245N) impair the repair of UV-damaged DNA in vivo and cause defective homologous pairing of ssDNA and dsDNA in vitro. Although RecAR243Q is only slightly defective and RecAK245N is completely proficient in ssDNA binding to form the presynaptic filament, both mutant RecA proteins are defective in the formation of the three-component complex including ssDNA, dsDNA, and RecA protein. The ability to form dsDNA from complementary single strands is also defective in both RecAR243Q and RecAK245N. These results suggest that the region including Arg243 and Lys245 may be involved in the path of secondary DNA binding to the presynaptic filament.     

Hyper-recombinogenic RecA protein from Pseudomonas aeruginosa with enhanced activity of its primary DNA binding site

According to one prominent model, each protomer in the activated nucleoprotein filament of homologous recombinase RecA possesses two DNA-binding sites. The primary site binds (1) single-stranded DNA (ssDNA) to form presynaptic complex and (2) the newly formed double-stranded (ds) DNA whereas the secondary site binds (1) dsDNA of a partner to initiate strand exchange and (2) the displaced ssDNA following the strand exchange. RecA protein from Pseudomonas aeruginosa (RecAPa) promotes in Escherichia coli hyper-recombination in an SOS-independent manner. Earlier we revealed that RecAPa rapidly displaces E.coli SSB protein (SSB-Ec) from ssDNA to form presynaptic complex. Here we show that this property (1) is based on increased affinity of ssDNA for the RecAPa primary DNA binding site while the affinity for the secondary site remains similar to that for E.coli RecA, (2) is not specific for SSB-Ec but is also observed for SSB protein from P.aeruginosa that, in turn, predicts a possibility of enhanced recombination repair in this pathogenic bacterium.     

Roles of Bacillus subtilis DprA and SsbA in RecA-mediated Genetic Recombination

Bacillus subtilis competence-induced RecA, SsbA, SsbB, and DprA are required to internalize and to recombine single-stranded (ss) DNA with homologous resident duplex. RecA, in the ATP·Mg²⁺-bound form (RecA·ATP), can nucleate and form filament onto ssDNA but is inactive to catalyze DNA recombination. We report that SsbA or SsbB bound to ssDNA blocks the RecA filament formation and fails to activate recombination. DprA facilitates RecA filamentation; however, the filaments cannot engage in DNA recombination. When ssDNA was preincubated with SsbA, but not SsbB, DprA was able to activate DNA strand exchange dependent on RecA·ATP. This work demonstrates that RecA·ATP, in concert with SsbA and DprA, catalyzes DNA strand exchange, and SsbB is an accessory factor in the reaction. In contrast, RecA·dATP efficiently catalyzes strand exchange even in the absence of single-stranded binding proteins or DprA, and addition of the accessory factors marginally improved it. We proposed that the RecA-bound nucleotide (ATP and to a lesser extent dATP) might dictate the requirement for accessory factors.     

The N-terminal domain of Escherichia coli RecA have multiple functions in promoting homologous recombination

Escherichia coli RecA mediates homologous recombination, a process essential to maintaining genome integrity. In the presence of ATP, RecA proteins bind a single-stranded DNA (ssDNA) to form a RecA-ssDNA presynaptic nucleoprotein filament that captures donor double-stranded DNA (dsDNA), searches for homology, and then catalyzes the strand exchange between ssDNA and dsDNA to produce a new heteroduplex DNA. Based upon a recently reported crystal structure of the RecA-ssDNA nucleoprotein filament, we carried out structural and functional studies of the N-terminal domain (NTD) of the RecA protein. The RecA NTD was thought to be required for monomer-monomer interaction. Here we report that it has two other distinct roles in promoting homologous recombination. It first facilitates the formation of a RecA-ssDNA presynaptic nucleoprotein filament by converting ATP to an ADP-Pi intermediate. Then, once the RecA-ssDNA presynaptic nucleoprotein filament is stably assembled in the presence of ATPγS, the NTD is required to capture donor dsDNA. Our results also suggest that the second function of NTD may be similar to that of Arg243 and Lys245, which were implicated earlier as binding sites of donor dsDNA. A two-step model is proposed to explain how a RecA-ssDNA presynaptic nucleoprotein filament interacts with donor dsDNA.     

The function of the secondary DNA-binding site of RecA protein during DNA strand exchange.

RecA protein features two distinct DNA-binding sites. During DNA strand exchange, the primary site binds to single-stranded DNA (ssDNA), forming the helical RecA nucleoprotein filament. The weaker secondary site binds double-stranded DNA (dsDNA) during the homology search process. Here we demonstrate that this site has a second important function. It binds the ssDNA strand that is displaced from homologous duplex DNA during DNA strand exchange, stabilizing the initial heteroduplex DNA product. Although the high affinity of the secondary site for ssDNA is essential for DNA strand exchange, it renders DNA strand exchange sensitive to an excess of ssDNA which competes with dsDNA for binding. We further demonstrate that single-stranded DNA-binding protein can sequester ssDNA, preventing its binding to the secondary site and thereby assisting at two levels: it averts the inhibition caused by an excess of ssDNA and prevents the reversal of DNA strand exchange by removing the displaced strand from the secondary site.