Identification of a ∼30S size non-ribosomal Saccharomyces cerevisiae RNA that is rapidly labeled on its 3′ end by ATP or UTP

Cell-free extracts prepared from S. cerevisiae cells were incubated in the presence of [-³²P]-labeled ATP, CTP, GTP or UTP. An RNA larger than ribosomal 25S RNA with an apparent size of approximately 30S was prominently labeled on its 3 end in the presence of ATP or UTP but not with CTP or GTP. This labeled RNA was not hybrid-selected by cloned yeast ribosomal DNA; in addition, this 30S RNA was not cleaved by RNase H in the presence of complementary deoxyribooligonucleotides to rRNA. These two lines of evidence show that this 30S RNA is not structurally related to ribosomal RNA gene repeat. The cell-free extracts prepared from yeast cells containing temperature-sensitive poly(A) polymerase adenylated this novel yeast RNA at restrictive temperature with efficiency similar to extracts prepared from wild-type yeast cells. These data show that the enzyme responsible for adenylation of this 30S RNA is distinct from mRNA poly(A) polymerase. While the human SRP RNA 3 adenylating enzyme in the HeLa cell extract adenylated human SRP or Alu RNAs, the yeast adenylating enzyme did not adenylate the human SRP or Alu RNAs in vitro; these data indicate species specificity for this adenylating enzyme.     

ThegrpD55 locus ofEscherichia coli appears to be an allele ofdnaB

Attempts to characterize thegrpD55 mutation ofEscherichia coli have led us to conclude that the gene had been assigned an incorrect map position. The mutation was found to cotransduce withmalF3089:: Tn10 (at 91.5 min) and adnaB-expressing plasmid was able to complement fully thegrpD55 defect in replication. These studies strongly suggest thatgrpD55 is an allele ofdnaB and is localized near 92 min on theE. coli linkage map.     

Glucanases and chitinases ofBacillus circulans WL-12

Summary Lysis of cell walls of various yeast species by -1,3- and -1,6-glucanases ofBacillus circulans WL-12 was investigated. Selective enzymolysis of cell walls ofPyricularia oryzae by single and combined actions of -1,3-, -1,6-glucanases and chitinase was followed. Chemical structure of the cell wall glucan ofP. oryzae was determined by chemical and enzymatic methods. Multiple component nature of glucanases ofB. circulans WL-12, their induction and lytic actions on cell walls of various yeasts were studied. Genes specifying glucanases and chitinases ofB. circulans WL- 12 were cloned inE. coli, and their nucleotide sequences were determined. Fibronectin type III modules were found in the chitinases. Functions of the domains of the deduced structures of the glucanases and the chitinases were studied by various methods including molecular genetic techniques.This paper is dedicated to Professor Herman Jan Phaff in honor of his 50 years of active research which still continues.     

Two-dimensional NMR study of the conformation of (34–65)bacterioopsin polypeptide in SDS micelles

Summary The conformation of the synthetic 32-residue polypeptide, an analog of the membrane spanning segment B (residues 34-65) ofHalobacterium halobium bacteriobpsin, incorporated into perdeuterated sodium dodecyl sulfate micelles in the presence of trifluoroethanol was investigated by¹H NMR spectroscopy. The spectrum resonances were assigned by means of phase-sensitive DQF-COSY, TOCSY and NOESY techniques. Interproton nuclear Overhauser effects and deuterium exchange rates of individual NH groups were derived from two-dimensional NMR spectra. Analysis of the obtained data showed that segment B has a right-handed a-helical stretch from Lys⁴¹ to Leu⁶² with a kink at Pros⁵⁰. The-helix in the C-terminal part is terminated at Gly⁶³, which adopts a conformation typical of amino acid residues in a left-handed helix. The N-terminal part (residues 34–40) has no ordered conformation. NMR data are provided for comparison of the segment B conformation in the isotropic system of an organic solvent, in SDS micelles and in the purple membrane bacterioopsin. Factors affecting the conformation of membrane spanning segment B in various milieus are discussed.Dedicated to the memory of Professor V.F. Bystrov     

Thiol-induced oligomerization of α-lactalbumin at high pressure

Denaturation and aggregation of-lactalbumin at high pressure (up to 10 kbar, 1000 MPa) were studied by means of circular dichroism, gel-permeation chromatography, sodium dodecyl sulfate and gel electrophoresis. It was found that the unfolding of-lactalbumin at high pressure is reversible even in basic pH and at a protein concentration as large as 10%. In these conditions only a negligible fraction of the protein is denatured irreversibly and aggregates. The rate of aggregation of-lactalbumin at high pressure increases significantly in the presence of low-molecular reducing agents such as cysteine, 2-mercaptoethanol, and dithiothreitol. Maximal yield of-lactalbumin oligomerization (over 90%) was achieved in the presence of cysteine at the molar cysteine/protein ratioq=2 and atpH 8.5. Apparent molecular weight of the obtained oligomers was over 500 kDa. It was shown that the size distribution of oligomers can be modulated by varyingpH and reducing agent. The size distribution shifts in the direction of very large, poorly soluble particles whenpH decreases. Maximal content of the insoluble fraction (about 30%) can be reached at pH 5.5 when cysteine (q=2) is used as reducing agent. The oligomers of-lactalbumin are stabilized mainly by nonnative interchain disulfide bridges. Circular dichroism measurements point to an additional mechanism of cohesion of polypeptide chains in the oligomers, which is formation of intermolecular-sheets.     

Spatial structure of (34–65)bacterioopsin polypeptide in SDS micelles determined from nuclear magnetic resonance data

Summary The spatial structure of a synthetic 32-residue polypeptide, an analog of the membrane-spanning segment B (residues 34–65) of bacterioopsin ofHalobacterium halobium, incorporated into perdeuterated sodium dodecyl sulfate micelles, was determined from¹H NMR data. The structure determination included the following steps: (1) local sructure analysis; (2) structure calculations using the distance geometry program DIANA; (3) systematic search for energetically allowed side-chain rotamers consistent with NOESY crosspeak volumes; (4) random generation of peptide conformations in allowed conformational space. The obtained structure has a righ-handed -helicl region from Lys⁴¹ to Leu⁶² with a kink of 27 at Pro⁵⁰. The C-cap Gly⁶³ adopts a conformation with =87±6, =43±10^o typical to a left-handed helix. The N-terminal part (residues 34–40) is exposed to the aqueous phase and lacks an ordered conformation. The secondary structure of segment B in micelles is consistent with the high-resolution electron cryomicroscopy model of bacteriorhodopsin (Henderson et al. (1990)J. Mol. Biol.,213, 899–929).     

The essentiality of B chain in stabilizing the structure of the A chain in β1-bungarotoxin fromBungarus multicinctus venom

The dynamic of Trp residue in ₁-bungarotoxin (gb ₁-Bgt), the A chain of ₁-Bgt and phospholipase A₂ (PLA₂) was assessed by fluorescence measurement. Acrylamide quenching studies showed that the exposure degree of the Trp in PLA₂ is higher than the Trp in ₁-Bgt. The Trp of ₁-Bgt had a higher accessibility for iodide, reflecting that the basic nature of the B chain might exert an attractive electrostatic force for iodide and increase the susceptibility of Trp in the A chain to iodide. Removal of the B chain of ₁-Bgt did not significantly affect the exposure degree of Trp in the A chain. Alternatively, the polarity of the environment around the Trp and the hydrophobic character of ANS and substrate binding sites in the separated A chain changed. Measurement of Trp fluorescence with increasing temperature showed that the stability of structure of ₁-Bgt was higher than those of the separated A chain and PLA₂. These results suggest that the B chain might interact with the A chain and stabilize the conformation of the A chain in ₁-Bgt.     

Peptide modification by incorporation ofα-trifluoromethyl substituted amino acids

Summary Metabolic stabilization of pharmacologically active peptides can be achieved by incorporation of sterically hindered non-natural amino acids, e.g. C ^, -disubstituted amino acids.-Trifluoromethyl substituted amino acids, a subclass of C ^, -disubstituted amino acids, also fulfil this requirement while featuring additional properties based on the electronic influence of the fluorine substituents.This review summarizes the results concerning the stability of peptides containing-TFM amino acids towards proteolysis by-chymotrypsin. Furthermore, configurational effects of-TFMAla on the proteolytic stability of peptides are explained using empirical force field calculations. The influence of-TFMAla incorporation on the secondary structure of selected tripeptide amides is compared to the effects exerted by its fluorine-free analogue, aminoisobutyric acid.Finally, results on metabolic stabilization and biological activity of modified thyrotropin releasing hormone are interpreted.     

Production of 22:2<Superscript>Δ5,Δ13</Superscript> and 20:1<Superscript>Δ5</Superscript> in <Emphasis Type="Italic">Brassica carinata</Emphasis> and soybean breeding lines via introduction of <Emphasis Type="Italic">Limnanthes</Emphasis> genes

Seed oils of meadowfoam (Limnanthes douglasii, L. alba) contain very long-chain fatty acids of strategic importance for a number of industrial applications. These include the monoene 20 1⁵ and the diene 22:2^5,13. Engineering of meadowfoam-type oils in other oilseed crops is desirable for the production of these fatty acids as industrial feedstocks. Accordingly, we have targeted Brassica carinata and soybean (Glycine max) to trangenically engineer the biosynthesis of these unusual fatty acids. An L. douglasii seed-specific cDNA (designated Lim Des5) encoding a homolog of acyl-coenzyme A desaturases found in animals, fungi and cyanobacteria was expressed in B. carinata, which resulted in the accumulation of up to 10% 22:2^5,13 in the seed oil. In soybean, co-expression of Lim Des5 with a cDNA (Lim FAE1) encoding an FAEl (elongase complex condensing enzyme) homolog from L. douglasii resulted in the accumulation of 20:1⁵ to approximately 10% of the total fatty acids of seeds. The content of C₂₀ and C₂₂ fatty acids was also increased from <0.5% in non-transformed soybean seeds to >25% in seeds co-expressing the Lim. douglasii Des5 and FAE1 cDNAs. In contrast, expression of the Lim Des5 in Arabidopsis did not produce the expected 20:2^5,11 in the seed oil. Cumulatively, these results demonstrate the utility of soybean and B. carinata for the production of vegetable oils containing novel C₂₀ and C₂₂ fatty acids, and confirm that the preferred substrates of the Lim Des5 are 20:0 and 22:1³, respectively.     

Co-induction of DNA relaxation and synthesis of DnaK and GroEL proteins inEscherichia coli by expression of LetD (CcdB) protein, an inhibitor of DNA gyrase encoded by the F factor

We examined the influence of overexpression of LetD (CcdB) protein, an inhibitor of DNA gyrase encoded by the F factor ofEscherichia coli, on DNA supercoiling and induction of heat shock proteins. Cells were transformed with a plasmid carrying the structural gene for LetD protein under control of thetac promoter, and LetD protein was induced by adding isopropyl-d-thiogalactopyranoside (IPTG) to the culture medium. Analysis by agarose gel electrophoresis in the presence of chloroquine revealed relaxation of plasmid DNA in cells depending on the concentration of IPTG employed for induction. Protein pulse-labeling experiments with [³⁵S]methionine and cysteine revealed that synthesis of DnaK and GroEL proteins was also induced by IPTG, and concentrations necessary for DNA relaxation and induction of the heat shock proteins were much the same. Expression of mutant LetD protein lacking two amino acid residues at the C-terminus induced neither DNA relaxation nor the synthesis of DnaK and GroEL proteins. Induction of wild-type LetD protein but not mutant LetD protein markedly enhanced synthesis of ³². We interpret these results to mean that DNA relaxation in cells caused by the expression of LetD protein induces heat shock proteins via increased synthesis of ³².     

Homologous recombination between plasmid DNA molecules in maize protoplasts

Summary The requirements for homologous recombination between plasmid DNA molecules have been studied using the PEG (polyethylene glycol)-mediated transformation system of maize (Zea mays L.) protoplasts coupled with the transient expression assay for -glucuronidase (GUS). Two plasmids were introduced into maize protoplasts; one plasmid (pB×26) contained a genomic clone of the Adh1 maize gene; the other plasmid (piGUS) was a promoterless construction containing part of intron A of the Adhl gene fused to the gusA coding sequence. Thus, the two vectors shared an effective homologous region consisting of a 459 by (Hindlll—PvuII) fragment of the yAdh1 intron A sequence. An active gusA fusion gene would result upon homologous recombination between the plasmids within the intron A sequence, and indeed GUS activity was observed in extracts following co-transformation of maize protoplasts with the two plasmids. The presence of recombinant DNA molecules in protoplast DNA isolated 1 day after co-transformation was verified using polymerase chain reactions (PCR) and Southern blots. For efficient homologous recombination, both plasmids had to be linearized. The recombination reaction was induced by restriction of the plasmid molecules either inside the effective homologous region or at the borders of the intron sequence. However, the presence of even small, terminal, nonhomologous sequences at the 3 end of the pB×26 fragment inhibited the recombination reaction. Also, both ends of the linearized piGUS DNA molecules were involved in the recombination reaction. The results revealed some features of homologous recombination reactions occurring in plant cells which cannot be accommodated by mechanisms postulated for similar reactions in animal system and in lower eukaryotes.     

Climatic adaptability of populations ofDiplotaxis erucoides D.C. (Brassicaceae) from Sicily,based on leaf morphology,leaf anatomy and δ13 C studies

The morphological and anatomical variability ofDiplotaxis erucoides populations from Sicily was investigated. Populations growing during the summer months exhibit distinct xeromorphic features. Leaf area is strongly reduced and leaf thickness is increased when compared with winter populations. Cell size, as well as cell arrangement and mesophyll cell surface area differ significantly between summer and winter populations. Leaf thickness is almost three times higher in summer populations andA (cell)/A, i.e. the mesophyll cell surface area per unit leaf area changes from about 16 for winter populations to almost 52 for summer populations. These differences are partly due to differences in intercellular volume and partly due to alterations in mesophyll cell sizes. The organic materal of the summer populations exhibits ¹³C values in the order of –27%. to –28%., while the corresponding values for the winter populations are in the order of –31%. to –33%.. Analysis ofD. erucoides populations from the transition period revealed intermediate ¹³C values. Anatomical variations such as reductions or increases ofA (cells)/A and changes of intercellular volume correlate with the corresponding ¹³C data. The ¹³C data are discussed in conjunction with the differences in leaf anatomy.     

Effect of Pt and Sn on the adsorption of n-heptane in γ-Al2O3 catalyst models

The Grand Canonical Monte-Carlo (GCMC) method has been used to carry out simulations of the adsorption of n-heptane in models of naphtha-reforming catalysts. Models used in the study differed in the number and distribution of metal atoms—Pt and Sn. The number of adsorbed n-heptane molecules grows linearly with increasing number of metal atoms. The effect of Pt content on the adsorption of n-heptane molecules is most distinct at approximately 100 kPa and within the lower range of the temperatures investigated. In the models of bimetallic catalysts, the effect of the two metals is additive.Figure Effect of Pt and Sn on number of n-heptane molecules adsorbed in Al₂O₃ catalyst in 773 K and 1000 kPa.