Negative control of plasmid pSC101 replication by increased concentrations of both initiator protein and iterons

Increased intracellular concentrations of the initiator protein Rep (or RepA) interfere with pSC101 DNA replication, and mutated Rep proteins that result in an increase in plasmid copy numbers do not inhibit the replication. A rep mutant (rep(inh)) defective in the inhibitory activity was isolated and found to be a new high copy number mutant. The inhibitory function of Rep was enhanced by the coexistence of directly repeated sequences (DR; iterons) in the replication origin region (ori), but not by the inverted repeat sequences (IR) in ori and the rep promoter. This synergistic effect of Rep and DR sequences for the replication inhibition was dependent on their intracellular concentrations. Considering that DR sequences are the specific binding sites of the Rep monomer form, the Rep monomer-DR complex might be responsible for the inhibition of the plasmid replication. Furthermore, the Rep monomer in the crude cell extracts facilitated dimerization of DR DNA fragments by DNA ligase. Neither synergistic inhibitory function with DR nor Rep mediated dimerization of DR DNA was observed in high copy number mutant Rep proteins. The role of the Rep-iteron complex in the copy number control of pSC101 is discussed.     

Mechanism of origin activation by monomers of R6K-encoded pi protein

One recurring theme in plasmid duplication is the recognition of the origin of replication (ori) by specific Rep proteins that bind to DNA sequences called iterons. For plasmid R6K, this process involves a complex interplay between monomers and dimers of the Rep protein, pi, with seven tandem iterons of gamma ori. Remarkably, both pi monomers and pi dimers can bind to iterons, a new paradigm in replication control. Dimers, the predominant form in the cell, inhibit replication, while monomers facilitate open complex formation and activate the ori. Here, we investigate a mechanism by which pi monomers out-compete pi dimers for iteron binding, and in so doing activate the ori. With an in vivo plasmid incompatibility assay, we find that pi monomers bind cooperatively to two adjacent iterons. Cooperative binding is eliminated by insertion of a half-helical turn between two iterons but is diminished only slightly by insertion of a full helical turn between two iterons. These studies show also that pi bound to a consensus site promotes occupancy of an adjacent mutated site, another hallmark of cooperative interactions. pi monomer/iteron interactions were quantified using a monomer-biased pi variant in vitro with the same collection of two-iteron constructs. The cooperativity coefficients mirror the plasmid incompatibility results for each construct tested. pi dimer/iteron interactions were quantified with a dimer-biased mutant in vitro and it was found that pi dimers bind with negligible cooperativity to two tandem iterons.     

A compact nucleoprotein structure is produced by binding of Escherichia coli integration host factor (IHF) to the replication origin of plasmid R6K.

Understanding the role of Escherichia coli histone-like protein integration host factor (IHF) in replication of R6K plasmid (Dellis, S., and Filutowicz, M. (1991) J. Bacteriol. 173, 1279-1286) requires detailed analyses of the interaction of IHF protein with the plasmid's replication origin (gamma ori). We describe an electron microscopic analysis which shows that a compact structure can be formed in the presence of IHF, in which, on average, a 102-base pair (bp) ori segment is involved. IHF.gamma ori complexes also undergo a two-step conformational change in an IHF concentration-dependent manner when analysed by band shift assay. We believe that the DNA is bent at low IHF concentrations, but folded at high IHF concentrations. This idea is supported by the fact that electrophoretic mobility of the IHF.gamma ori complexes is faster at higher concentrations of IHF. Furthermore, it is shown that the formation of a compact nucleoprotein structure depends on the two regions flanking the AT-rich segment; the iterons to the right and the 106-bp ori domain to the left. Finally we show that IHF protects the entire AT-rich segment of the ori against nuclease cleavage. In addition to the protection, an altered cleavage pattern by DNase I, in the presence of high levels of IHF, was observed within the iterons but not within the 106-bp domain of the ori. Implications of the IHF-mediated gamma ori folding as a possible mechanism protecting the ori from replication inhibition by R6K initiator protein tau are discussed.     

Two enhancer elements for DNA replication of pSC101, par and a palindromic binding sequence of the Rep protein.

The minimal replication origin (ori) of the plasmid pSC101 has been previously defined as an approximately 220-bp region by using plasmids defective in the par region, which is a cis-acting determinant of plasmid stability. This ori region contains the DnaA binding sequence, three repeated sequences (iterons), and an inverted repeat (IR) element (IR-1), one of the binding sites of an initiator protein, Rep (or RepA). In the present study, we show that plasmids containing par can replicate at a nearly normal copy number in the absence of IR-1 but still require a region (the downstream region) between the third iteron and IR-1. Because par is dispensable in plasmids retaining IR-1, par and IR-1 can compensate each other for efficient replication. The region from the DnaA box to the downstream region can support DNA replication at a reduced frequency, and it is designated "core-ori." Addition of either IR-1 or par to core-ori increases the copy number of the plasmid up to a nearly normal level. However, the IR-1 element must be located downstream of the third iteron (or upstream of the rep gene) to enhance replication of the plasmid, while the par region, to which DNA gyrase can bind, functions optimally regardless of its location. Furthermore, the enhancer activity of IR-1 is dependent on the helical phase of the DNA double helix, suggesting that the Rep protein bound to IR-1 stimulates the activation of ori via its interaction with another factor or factors capable of binding to individual loci within ori.     

Minimal essential origin of plasmid pSC101 replication: requirement of a region downstream of iterons.

The minimal replication origin (ori) of the plasmid pSC101 was defined as an about 220-bp region under the condition that the Rep (or RepA) protein, a plasmid-encoded initiator protein, was supplied in trans. The DnaA box is located at one end of ori, as in other plasmids, like mini-F and P1. The other border is a strong binding site (IR-1) of Rep which is palindromic sequence and lies in an about 50-bp region beyond the repeated sequences (iterons) in ori. This IR-1 is located just upstream of another strong Rep binding site (IR-2), the operator site of the structure gene of Rep (rep), but its function has not been determined. The present study shows that the IR-1 sequence capable of binding to Rep is essential for plasmid replication with a nearly normal copy number. Furthermore, a region between the third iteron and IR-1 is also required in a sequence-specific fashion, since some one-base substitution in this region inactivate the origin function. It is likely that the region also is a recognition site of an unknown protein. Three copy number mutations of rep can suppress any one-base substitution mutation. On the other hand, the sequence of a spacer region between the second and the third iterons, which is similar to that of the downstream region of the third iteron, can be changed without loss of the origin function. The requirement of the region downstream of iterons in pSC101 seems to be unique among iteron-driven plasmid replicons.     

Two alternative structures can be formed by IHF protein binding to the plasmid R6K gamma origin.

Escherichia coli integration host factor (IHF) contributes to the regulation of R6K plasmid copy number by counteracting the inhibitory activity of the plasmid-encoded replication protein pi. Two IHF-binding sites (ihf1 and ihf2) flank seven iterons in the origin which bind pi protein. As previously shown by electron microscopy, IHF can compact a large segment of the R6K gamma origin DNA, encompassing site ihf1, an AT-rich domain containing ihf1, and some of the seven iterons located downstream of ihf1. We termed this phenomenon IHF-mediated DNA folding. This folding requires a high IHF concentration, and the region of the origin (replication enhancer) located to the left of the AT-rich domain. However, site ihf2 is not necessary in forming the folded structure. As reported here, IHF binding to ihf2 can be detected in gel mobility shift assays only if the leftmost enhancer region is absent. Sites ihf1 and ihf2 each contain two consensus IHF sequences. Site-directed mutagenesis was performed to determine which sequences are recognized by IHF protein and which sites are involved in forming the various gamma origin-IHF complexes. Finally, we define the boundaries of protection from DNaseI digestion when IHF is bound to ihf2. We propose a model in which IHF protein bound to ihf1, in the absence of the enhancer region, facilitates IHF binding to ihf2.     

Monomer/dimer ratios of replication protein modulate the DNA strand-opening in a replication origin

DNA opening is an essential step in the initiation of replication via the Cairns mode of replication. The opening reaction was investigated in a gamma ori system by using hyperactive variants of plasmid R6K-encoded initiator protein, pi. Reactivity to KMnO4 (indicative of opening) within gamma ori DNA occurred in both strands of a superhelical template upon the combined addition of wt pi, DnaA and integration host factor (IHF), each protein known to specifically bind gamma ori. IHF, examined singly, enhanced reactivity to KMnO4. The IHF-dependent reactive residues, however, are distinct from those dependent on pi (wt and hyperactive variants). Remarkably, the DNA helix opening does not require IHF and/or DnaA when hyperactive variants of pi were used instead of wt protein. We present three lines of evidence consistent with the hypothesis that DNA strand separation is facilitated by pi monomers despite the fact that both monomers and dimers of the protein can bind to iterons (pi binding sites). Taken together, our data suggest that pi elicits its ability to modulate plasmid copy number at the DNA helix-opening step.     

Regulation of DNA replication by iterons: an interaction between the ori2 and incC regions mediated by RepE-bound iterons inhibits DNA replication of mini-F plasmid in Escherichia coli.

In bacteria, plasmids and some DNA viruses, DNA replication is initiated and regulated by binding of initiator proteins to repetitive sequences. To understand the control mechanism we used the plasmid mini-F, whose copy number is stringently maintained in Escherichia coli, mainly by its initiator protein RepE and the incC region. The monomers of RepE protein bound to incC iterons, which exert incompatibility in trans and control the copy number of mini-F plasmid in cis. Many incompatibility defective mutants carrying mutations in their incC iterons had lost the affinity to bind to RepE, while one mutant retained high level binding affinity. The mutated incC mini-F plasmids lost the function to control the copy number. The copy number of the wild-type mini-F plasmid did not increase in the presence of excess RepE. These results suggested that the control of replication by incC iterons does not rely on their capacity to titrate RepE protein. Using a ligation assay, we found that RepE proteins mediated a cross-link structure between ori2 and incC, for which the dimerization domain of RepE and the structure of incC seem to be important. The structure probably causes inhibition of extra rounds of DNA replication initiation on mini-F plasmids, thereby keeping mini-F plasmid at a low copy number.     

The ColE2-P9 Rep protein binds to the origin DNA as a monomer

The Rep proteins of some plasmid replicons have two functions. Dimers bind to the operator sequences acting as auto-repressors, whereas monomers bind to the iterons to initiate replication of DNA. The ColE2 Rep proteins are present mostly in a dimeric form with some multimers larger than dimers in solution, while the form of Rep binding to Ori is not known. We used an EMSA-based method to determine the molecular weight of Rep in the Rep-Ori complex. The result suggested that Rep binds to Ori as a monomer. In addition, the result of EMSA using the Rep protein fused with the maltose binding protein and the His6-tag also supported this conclusion. We proposed that dimerization of Rep might probably be involved in keeping the copy number of the ColE2 plasmid at the normal low level by limiting the amount of active monomeric forms of Rep in the host cell.     

The integration host factor of Escherichia coli binds to bent DNA at the origin of replication of the plasmid pSC101

The integration host factor (IHF) of Escherichia coli is necessary for maintenance of pSC101. The protein binds specifically to the replication origin of the plasmid, in the AT-rich region located immediately adjacent to the left, weak binding site for the plasmid-encoded initiator protein. DNAase I and OH- radical footprinting experiments showed that IHF protects 49 bp of the DNA at the origin region. Methylation protection analyses revealed that IHF contacts purine residues in both the major and minor grooves of the DNA. Electrophoretic analyses showed that IHF binds to bent DNA, and the protein binding further enhances the degree of DNA bending. Site-directed mutagenesis of three of the contact points not only abolished binding of the protein to the DNA but also inactivated the replication origin. Therefore, binding of IHF to the ori sequence most probably is necessary for initiation of plasmid replication.     

A single-stranded region located downstream of the repeated sequence in the ori region of pSC101 is required for binding of the Rep protein in vitro.

Purified replication initiator protein (Rep) of plasmid pSC101 binds preferentially to two inverted repeats (IR) overlapping the promoter of its own structure gene, rep. However, the protein has much lower binding affinity for directly repeated (DR) sequences in the replication origin (ori) that are similar to the symmetric sequences. Exonuclease III (exo III) promotes in vitro binding of Rep to the origin repeats. In the present studies, DNA containing the DR sequences was degraded unidirectionally by exo III and then formed a complex with Rep. Analyses of DNA from the complex revealed that Rep bound to the DR sequences only when the degradation proceeded from the 3' end proximal to IR to the DR sequences, resulting in conversion of the duplex structure in a specific downstream region of DR into the single-stranded form. The degradation in the opposite direction had no effect on binding of Rep. These results suggest that a localized structural change of DNA adjacent to DR is required for Rep binding to double-stranded DR sequences. By contrast, exo III strikingly inhibited binding of Rep to DNA containing the IR sequences by introducing a single-stranded moiety into duplex IR sequences.     

Characterization of the oriI and oriII Origins of Replication in Phage-Plasmid P4

In the Escherichia coli phage-plasmid P4, two partially overlapping replicons with bipartite ori sites coexist. The essential components of the oriI replicon are the alpha and cnr genes and the ori1 and crr sites; the oriII replicon is composed of the alpha gene, with the internal ori2 site, and the crr region. The P4 alpha protein has primase and helicase activities and specifically binds type I iterons, present in ori1 and crr. Using a complementation test for plasmid replication, we demonstrated that the two replicons depend on both the primase and helicase activities of the alpha protein. Moreover, neither replicon requires the host DnaA, DnaG, and Rep functions. The bipartite origins of the two replicons share the crr site and differ for ori1 and ori2, respectively. By deletion mapping, we defined the minimal ori1 and ori2 regions sufficient for replication. The ori1 site was limited to a 123-bp region, which contains six type I iterons spaced regularly close to the helical periodicity, and a 35-bp AT-rich region. Deletion of one or more type I iterons inactivated oriI. Moreover, insertion of 6 or 10 bp within the ori1 region also abolished replication ability, suggesting that the relative arrangement of the iterons is relevant. The ori2 site was limited to a 36-bp P4 region that does not contain type I iterons. In vitro, the alpha protein did not bind ori2. Thus, the alpha protein appears to act differently at the two origins of replication.     

Open strands adjacent to iterons promote the binding of the replication initiator protein (Rep) of pSC101 to the unit sequence of the iterons in vitro

The purified dimeric form of the Rep protein, a replication initiator protein of the plasmid pSC101, has a low affinity for repeated sequences, iterons, in the replication origin of the plasmid, and higher affinities for two inverted repeats in the operator region of the rep gene resulting in its functioning as an autorepressor. Studies of binding to various synthetic DNA have established that Rep can bind to duplex iteron-sequence carrying open (non-complementary) strands at one end proximal to the rep gene. Open strands at the opposite end of the iteron have no effect on Rep-binding. One open strand seems to be required in a sequence-specific fashion. A randomly sequenced duplex DNA with the open strands cannot bind to Rep but can function as a significant competitor. This suggests that Rep has some affinity for the open strands and forms a stable complex with the adjacent iteron. The mutated Rep protein, Rep1, which causes an increase in the plasmid copy number in vivo, has equally high affinity for the iteron with the open strands as wild type Rep, though it has a lower affinity for the inverted repeats than the wild type. The Rep dimer might bind to these DNA sequences with different modes.     

Structure-function analysis of the SaPIbov1 replication origin in Staphylococcus aureus

The SaPIs and their relatives are phage satellites and are unique among the known bacterial pathogenicity islands in their ability to replicate autonomously. They possess a phage-like replicon, which is organized as two sets of iterons arrayed symmetrically to flank an AT-rich region that is driven to melt by the binding of a SaPI-specific initiator (Rep) to the flanking iterons. Extensive deletion analysis has revealed that Rep can bind to a single iteron, generating a simple shift in a gel mobility assay; when bound on both sides, a second retarded band is seen, suggesting independent binding. Binding to both sites of the ori is necessary but not sufficient to melt the AT-rich region and initiate replication. For these processes, virtually the entire origin must be present. Since SaPI replication can be initiated on linear DNA, it is suggested that bilateral binding may be necessary to constrain the intervening DNA to enable Rep-driven melting.