Characterisation of the nitrile hydratase gene clusters of <Emphasis Type="Italic">Rhodococcus erythropolis</Emphasis> strains AJ270 and AJ300 and <Emphasis Type="Italic">Microbacterium</Emphasis> sp. AJ115 indicates horizontal gene transfer and reveals an insertion of IS1166

The nitrile metabolising strains AJ270, AJ300 and AJ115 were isolated from the same location. The strains have very similar nitrile metabolising profiles. Sequencing of the 16S rRNA gene indicates that strains AJ270 and AJ300 are novel strains of Rhodococcus erythropolis while strain AJ115 is a novel Microbacterium strain very closely related to Microbacterium oxydans and Microbacterium liquefaciens. Analysis of the structure of the nitrile hydratase/amidase gene clusters in the three strains indicates that this region is identical in these strains and that this structure is different to other nitrile hydratase/amidase gene clusters. The major difference seen is the insertion of a complete copy of the insertion sequence IS1166 in the nhr2 gene. This copy of IS1166 generates a 10 bp direct duplication at the point of insertion and has one ORF encoding a protein of 434 amino acids, with 98% homology to the transposase of IS666 from Mycobacterium avium. A gene oxd, encoding aldoxime dehydratase is found upstream of the nitrile hydratase gene cluster and an open reading frame encoding a protein with homology to GlnQ type ABC transporters is found downstream of the nitrile hydratase/amidase genes. The identity of the nitrile hydratase/amidase gene clusters in the three strains suggests horizontal gene transfer of this region. Analysis of the strains for both linear and circular plasmids indicates that both are present in the strains but hybridisation studies indicate that the nitrile hydratase/amidase gene cluster is chromosomally located. The nitrile hydratase/amidase enzymes of strain AJ270 are inducible with acetonitrile or acetamide. Interestingly although a number of Fe-type nitrile hydratases have been shown to be photosensitive, the enzyme from strain AJ270 is not.     

Cloning and nucleotide sequence of frpC, a second gene from Neisseria meningitidis encoding a protein similar to RTX cytotoxins

Neisseria meningitidis FAM20 has recently been shown to produce two Fe-regulated proteins (FrpA and FrpC) related to the RTX family of cytotoxins. Here we report the cloning and DNA sequence of the locus containing the gene encoding the larger meningococcal RTX protein FrpC. FrpC was highly similar to FrpA throughout much of the predicted protein, with two main differences. Whereas the FrpA protein had 13 copies of the nine-amino-acid repeat units typical of RTX proteins, FrpC had 43 copies. The additional copies in FrpC apparently arose from a threefold tandem amplification of a 600bp DNA fragment encoding the repeats. In addition, the frpC gene lacked good promoter consensus sequences. An open reading frame (0RF1) of unknown function was found immediately upstream of frpC, suggesting the possibility that frpC was cotranscribed with ORF1. A probable promoter was found 300 bp upstream of ORF1, and it contained a Fur protein-binding sequence found in the promoters of Fe-regulated Escherichia coli genes. DNA upstream of the ORF 1/frpC promoter was homologous to IStO76-like elements surrounding capsulation loci of strains of Haemophilus influenzae. A FrpC-like protein (reactive in immunoblots with monoclonal antibody 9D4; multiple reactive bands of about 200 to 120kDa) was found in five out of eight meningococcal strains but only in one out of 14 other Neisseria, suggesting that FrpC may participate in the pathogenesis of meningococcal disease.     

Nucleotide sequence of IS110, an insertion sequence of Streptomyces coelicolor A3(2).

The nucleotide sequences of the Streptomyces transposable element IS110 and its insertion site in the DNA of a derivative of the temperate phage luminal diameter C31 were determined. The element is inserted about 460 bp from the right-hand end of luminal diameter C31 DNA, in a region of apparently non-coding DNA. The target site (in a run of seven C residues) is within an 11 bp sequence homologous with one end of IS110. The inserted element is flanked by runs of 11 and 15 C residues which form part of more extensive regions of homology between the left and right junction regions. Imperfect inverted repeats (10 matches out of 15 bp) are present near (but not at) the ends of IS110. The whole IS110 element contains about 1550 bp of which 71% are G-C bp. One major potentially protein-coding region (ORF 1215) was detected, of 1215 bp, the product of which, a presumptively soluble protein of MR 43,563, was not overtly related to any entry in a protein sequence database. A smaller open reading frame (ORF 330) was tentatively identified in the opposite strand of the ORF 1215 region.     

Evaluation of the Applied Biosystems automated Taqman polymerase chain reaction system for the detection of meningococcal DNA

In a period where the proportion of culture confirmed cases in the UK has been steadily declining, diagnosis by PCR has been used to increase the number of confirmed cases and provide additional epidemiological data. This report presents a comparative evaluation of the fluorogenic probe-based 5' exonuclease assay (Taqman) using the Perkin-Elmer Applied Biosystems automated sequence detection system 7700 with previously reported polymerase chain reaction enzyme-linked immunosorbent (PCR ELISA) assays for the detection of meningococcal DNA in CSF, plasma and serum samples. Taqman assays developed were based on the detection of a meningococcal capsular transfer gene (ctrA), the insertion sequence IS1106 and the sialytransferase gene (siaD) for serogroup B and C determination and compared with similar assays in a PCR ELISA format. The Taqman ctrA assay was specific for Neisseria meningitidis, however the IS1106 assay gave false positive reactions with a number of non-meningococcal isolates. Sensitivity of the Taqman ctrA, IS1106 and siaD assays testing samples from culture-confirmed cases were 64, 69 and 50%, respectively, compared with 26, 67 and 43% for the corresponding PCR ELISA assays. Improvements to the DNA extraction procedure has increased the sensitivity to 93 and 91% for the TaqMan ctrA and siaD assays, respectively, compared to culture confirmed cases. Since the introduction of Taqman PCR a 56% increase in laboratory confirmed cases of meningococcal disease has been observed compared to culture only confirmed cases. The developed Taqman assays for the diagnosis of meningococcal disease enables a high throughput, rapid turnaround of samples with considerable reduced risk of contamination.     

A new insertion sequence element,ISLdl1, in Lactobacillus delbrueckii subsp. lactis ATCC 15808

A new insertion sequence element designated ISLdl1 has been isolated and characterized from Lactobacillus delbrueckii subsp. lactis ATCC 15808. It is the first IS element of L. delbrueckii subsp. lactis described. ISLdl1 is a 1508 bp element flanked by 26 bp imperfect inverted repeats, and generates an 8 bp AT-rich target duplication upon insertion. It contains one ORF encoding a protein of 455 amino acids. This protein shows significant homology to the transposases of the ISL3 family and to other bacterial transposases and putative transposases, and no homology to other proteins. Based on these structural features, ISLdl1 belongs to the ISL3 family. ISLdl1 is present in about 10-12 copies in the genome of ATCC 15808 based on Southern hybridization analysis. Location sites of eight ISLdl1 copies have been determined in more detail by cloning and sequencing one or both of the flanking regions of each ISLdl1 copy. ISLdl1 or ISLdl1-like IS elements were found exclusively in Lactobacillus delbrueckii species and in all strains of subsp. lactis tested. The nucleotide sequence of ISLdl1 is deposited under the accession number AJ302652.     

Characterization of a novel insertion sequence,IS<Emphasis Type="Italic">Bp1</Emphasis>, in<Emphasis Type="Italic"> Burkholderia pseudomallei</Emphasis>

During screening for antigenic proteins in Burkholderia pseudomallei, a novel insertion sequence, IS Bp1, was found by sequence similarity searches. IS Bp1 contains two overlapping ORFs of 261 bp ( orfA) and 852 bp ( orfB), encoding 87 and 284 amino acid residues, respectively, and an imperfect inverted repeat. The putative protein encoded by orfA (OrfA) is similar to the OrfA in insertion sequences of the IS 3 family in other bacteria, showing 49% and 76% amino acid identity and similarity, respectively, with the transposase encoded by IS D1 of Desulfovibrio vulgaris vulgaris. The putative protein encoded by orfB (OrfB) is similar to the OrfB in insertion sequences of the IS 3 family in other bacteria, showing 43% and 62% amino acid identity and similarity, respectively, with the transposase encoded by IS 1222 of Enterobacter agglomerans. Sequence analysis of OrfA showed the presence of an alpha-helix-turn-alpha-helix motif, as well as the putative leucine zipper at its 3' end, for possible DNA binding to the terminal inverted repeats. Sequence analysis of OrfB showed the presence of a DDE motif of aspartic acid, aspartic acid, and glutamic acid, a highly conserved motif present in OrfB of other members of the IS 3 family. Furthermore, several other conserved amino acid residues, including the arginine residue located seven amino acids downstream from the glutamic acid residue, were observed. PCR amplification of the IS Bp1 gene showed a specific band in 65% of the 26 B. pseudomallei strains tested. Southern blot hybridization after XhoI or SacI digestion showed nine different patterns of hybridization. The number of copies of IS Bp1 in those strains that possessed the insertion sequence ranged from three to 12. Using several insertion sequences and a combination of insertion-sequence-based and non-insertion-sequence-based methods such as ribotyping will probably increase the discriminatory power of molecular typing in B. pseudomallei.     

Three new insertion sequence elements ISLdl2, ISLdl3, and ISLdl4 in Lactobacillus delbrueckii: isolation,molecular characterization,and potential use for strain identification

A group of new insertion sequence (IS) elements, ISLdl2, ISLdl3, and ISLdl4, from Lactobacillus delbrueckii subsp. lactis ATCC 15808 was isolated, characterized, and used for strain identification together with ISLdl1, recently characterized as an L. delbrueckii IS element belonging to the ISL3 family. ISLdl2 was 1367 bp in size and had a 24 bp IR and an 8 bp DR. The single ORF of ISLdl2 encoded a protein of 392 aa similar to transposases of the IS256 family. ISLdl3 had a single ORF encoding a protein of 343 aa similar to transposases of the IS30 family. Finally, ISLdl4 had a single ORF encoding a protein of 406 aa and displayed homology to the transposases of the IS110 family. ISLdl4 was only slight different from ISL4 (Accession No. AY040213). ISLdl1, ISLdl2, and ISLdl4 were present in all of the 10 L. delbrueckii subsp. lactis and subsp. delbrueckii strains tested, as well as in three of the 11 L. delbrueckii subsp. bulgaricus strains tested. ISLdl3 was present only in four closely related strains of L. delbrueckii subsp. lactis. These IS elements were not observed in Lactobacillus rhamnosus, Lactobacillus acidophilus, Lactobacillus helveticus, or Lactobacillus plantarum. A cluster of IS elements, ISLdl1, ISLdl2, ISLdl3, ISLdl4, and ISL6, was observed in L. delbrueckii subsp. lactis strain ATCC 15808. Within this cluster, ISLdl4 was inserted into ISLdl1 between the left IR and the start codon of ORF455, encoding a putative transposase. Most of the integration sites of the IS elements were strain-specific. We have observed that IS elements can migrate from one strain to another as integral parts of bacterial DNA by using phage LL-H as a vehicle. We demonstrate for the first time that inverse PCR and vectorette PCR methods with primers based on sequences of the IS elements could be used for identification of L. delbrueckii strains.     

ISZm1068: an IS5-like insertion element from Zymomonas mobilis

A new insertion sequence, designated ISZm1068, was isolated from Zymomonas mobilis strain CP4. This element consists of 1,068 bp and contains one major ORF which shows similarities both at the nucleotide and at the amino acid sequence level with the corresponding ORFs encoding the transposases of many IS5 family elements, in particular the IS1031 group. Moreover, the Z. mobilis ORF shares the conserved N2, N3 and C1 signature motifs of the IS4 and IS5 families. Six out of seven Z. mobilis wild-type strains were shown by hybridisation to contain a single copy of the ISZm1068 element. Nucleotide sequences of the insertion elements from these strains exhibited extremely high levels of identity, varying from 94.25 to 99.25%. ISZm1068 was shown to be active in Escherichia coli cells and led to plasmid replicon fusions within the host cell. Sequence analysis of rare cointegration and resolution derivatives suggests that ISZm1068 has putative imperfect inverted repeats at its extremities of 18 bp (IR-right) and 14 bp (IR-left), and that a 3-bp (5'-TCA-3') target sequence is duplicated upon insertion.     

Characterisation of IS1126 from Porphyromonas gingivalis W83: a new member of the IS4 family of insertion sequence elements

Abstract The nucleotide sequence of IS 1126 , the only insertion sequence so far isolated from the oral pathogen Porphyromonas gingivalis , has been determined. It had a nucleotide sequence of 1338 base pair (bp) flanked by 12 bp perfect inverted repeats and generated a 5 bp target site duplication. The single major open reading frame encoded a predicted protein of 361 amino acids and molecular mass of 41 kDa. The gene encoding the transpsosase was subcloned into pUC18 and the transposase expressed in Escherichia coli minicells. The predicted amino acid sequence of the transposashad homology to putative transposases of IS 1106 and IS 1186 both of which belong to the IS 5 group within the IS₄ super-family of insertion elements. On the basis of this homology we propose that IS 1126 should also be included in the IS 5 group. Southern-blot analysis of a number of P. gingivalis strains using IS 1126 as a probe revealed a unique pattern of hybridisation for each strain and the absence of IS 1126 from other closely related Porphyromonas species. This should allow IS 1126 to be used as a rapid epidemiological tool in studying oral infections by P. gingivalis .     

Characterization of IS1474, an insertion sequence of the IS21 family isolated from Pseudomonas alcaligenes NCIB 9867

A new insertion sequence (IS) designated IS1474 was isolated from Pseudomonas alcaligenes NCIB 9867 (P25X). IS1474 is a 2632 bp element which showed a characteristic IS structure with 12 bp inverted repeats (IRs) flanking a 2608 bp central region. IS1474 contained four open reading frames (ORF1–ORF4), two in each orientation. Similarities were detected between ORF1 and ORF2 and the putative transposases of the IS21 family. Sequences upstream from IS1474 were found to display up to 89% homology with IS53 from Pseudomonas syringae suggesting that IS1474 had inserted into another related IS element designated IS1475. An open reading frame, ORF5, located at the junction of IS1474 and IS1475, showed similarities with the IstB protein of IS21 and could possibly be the transposase subunit of IS1475. Transposition assays showed that IS1474 transposed at a relatively low frequency leading to cointegration with target plasmids. Hybridization studies showed that IS1474 is present in at least 13 copies in the chromosome of P25X and one copy on its endogenous plasmid.     

The enterotoxin gene (cpe) of Clostridium perfringens can be chromosomal or plasmid-borne

The location of the cpe gene, encoding the enterotoxin responsible for food poisoning in humans, has been studied in a series of enterotoxigenic Ciostridium perfringens strains by means of pulsed field gel electrophoresis of genomic DNA. The cpe gene was found at the same chromosomal locus in strains associated with food poisoning in humans and was shown to be linked to a repetitive sequence, the Hin dlll repeat, and an open reading frame, ORF3, that may be part of an insertion sequence. In contrast, when the strains originated from domesticated livestock cpe was located on a large episome where it was often close to a copy of the transposable element IS 1151. In these cases, the Hin dlll repeat was not linked to the cpe gene although this was generally preceded by ORF3.     

Identification, distribution, and sequence analysis of new insertion elements in Caulobacter crescentus.

We describe two insertion elements isolated from Caulobacter crescentus that are designated IS298 and IS511. These insertion elements were cloned from spontaneous flagellar (fla) gene mutants SC298 and SC511 derived from the wild-type strain CB15 (ATCC 19089), in which they were originally identified as insertions in the flbG operon of the hook gene cluster (N. Ohta, E. Swanson, B. Ely, and A. Newton, J. Bacteriol. 158:897-904, 1984). IS298 and IS511 were each present in C. crescentus CB2 and CB15 in at least four different positions, but neither was present in strain CB13 or in several Caulobacter species examined, including C. vibrioides, C. leidyia, and C. henricii. Nucleotide sequence analysis across the chromosome-insertion element junctions showed that IS298 is located 152 base pairs (bp) upstream from the ATG translation start of the hook protein gene flaK, where it is bounded by a 4-bp direct repeat derived from the site of insertion, and that IS511 is inserted at codon 186 of the flaK coding sequence, where it is also bounded by a 4-bp direct repeat duplicated from the site of insertion. The ilvB102 mutation in strain SC125 was also shown to result from insertion sequence IS511, but no duplication of the genomic sequence was present at the insertion element junctions. IS298 contains an imperfect terminal inverted repeat 16 bp long, and IS511 contains a 32-bp inverted repeat at the termini. IS298 and IS511 are the first insertion elements described in C. crescentus.     

Cloning of insertion sequence IS1485 from Enterococcus species.

We have cloned and identified an insertion sequence, IS1485, that was present in several members of the genus Enterococcus. IS1485 exists in varying copy numbers with at least 12 copies in E. durans (ATCC 11576), 3 copies in E. faecium (ATCC 19434), and one copy each in E. faecalis (ATCC 19433) and E. avium (ATCC 14024). It was also detected in clinical strains of E. gallinarum, E. casseliflavus, and E. saccharolyticus. IS1485 is 1366 bp in length, it has imperfect terminal inverted repeats with 25 of the terminal 39 residues matched, and it contains three open reading frames exceeding 50 codons, designated orfA, orfB, and orfC. The largest, orfB, was located 36 bp downstream and in the -1 reading frame relative to orfA; orfC is oriented in the opposite direction and overlaps orfA. The genetic organization of IS1485 resembles that of members of the IS3 family of transposable elements. Sequence homology exists with several members of the IS3 family especially with IS199 from Streptococcus mutans.     

Role of horizontal genetic exchange in the antigenic variation of the class 1 outer membrane protein of Neisseria meningitidis

The nucleotide sequences of the genes encoding the class 1 outer membrane protein of Neisseria meningitidis (PorA) from 15 meningococcal isolates have been examined. These strains, isolated over a number of years, represented a variety of serological types, clonal groups, and geographical locations. Analysis of the aligned nucleotide sequences showed that the known serological relationships between these proteins were not necessarily reflected throughout the nucleotide sequences of their genes. The uneven distribution of base substitutions, revealed by a comparison of the informative bases, suggested that these genes possessed a mosaic structure. This structure probably resulted from the horizontal transfer of DNA between strains and would have contributed to both the generation and the spread of novel antigenic variants of the protein. In addition, the nucleotide differences between porA genes from different strains were not consistent with the nucleotide sequence divergence of the whole chromosome, as indicated by pulsed-field gel electrophoresis (PFGE) fingerprinting techniques: some strains with divergent PFGE fingerprints shared porA genes with extensive regions of nucleotide sequence identity and, conversely, some strains with similar chromosome structures possessed porA genes with different nucleotide sequences and serological properties. This suggested that entire genes had been exchanged between strains. Given that the meningococcal class 1 OMP is a major component in novel vaccines, some of which are currently undergoing field trials, the potential of horizontal genetic exchange to generate antigenic diversity has implications for the design of such vaccines.     

Characterization of IS1001, an insertion sequence element of Bordetella parapertussis.

By analysis of repetitive DNA in Bordetella parapertussis, an insertion sequence element, designated IS1001, was identified. Sequence analysis revealed that IS1001 comprised 1,306 bp and contained inverted repeats at its termini. Furthermore, several open reading frames that may code for transposition functions were identified. The largest open reading frame coded for a protein comprising 406 amino acid residues and showed homology to TnpA, which is encoded by an insertion sequence element (IS1096) found in Mycobacterium smegmatis. Examination of flanking sequences revealed that insertion of IS1001 occurs preferentially in stretches of T's or A's and results in a duplication of target sequences of 6 to 8 bases. IS1001 was found in about 20 copies in 10 B. parapertussis strains analyzed. No restriction fragment length polymorphism was observed in B. parapertussis when IS1001 was used as a probe. An insertion sequence element similar or identical to IS1001 was found in B. bronchiseptica strains isolated from pigs and a rabbit. In these strains, about five copies of the IS1001-like element were present at different positions in the bacterial chromosome. Neither B. pertussis nor B. bronchiseptica strains isolated from humans and dogs contained an IS1001-like element. Therefore, IS1001 may be used as a specific probe for the detection of B. parapertussis in human clinical samples.     

IS901, a new member of a widespread class of atypical insertion sequences, is associated with pathogenicity in Mycobacterium avium

An insertion sequence (IS901), found in pathogenic strains of Mycobacterium avium, but absent in M. avium complex isolates from patients with acquired immune deficiency syndrome (AIDS), has been isolated and sequenced. This insertion element has a nucleotide sequence of 1472 bp, with one open reading frame (ORF1), which codes for a protein of 401 amino acids. The amino acid sequence, terminal ends and target site of IS901 are similar to those of IS900, present in Mycobacterium paratuberculosis. However, the DNA sequences of these two IS elements exhibit only 60% homology, compared to a DNA homology of 98% between their respective hosts. IS901, like IS900, appears to belong to a family of related insertion elements present in actinomycetes and other bacteria. M. avium strains containing IS901 were found to be more virulent in mice than closely related strains lacking IS901. IS901 may be a useful tool for the study of the genetics of virulence in the M. avium complex and for obtaining stable integration of foreign genes into mycobacteria.