Improved stability of the lipase from Candida rugosa in different purification degrees by chemical modification

Summary Semipurified lipase of Candida rugosa and pure isoforms (lipase A and lipase B) have been chemically modified using two methodologies based on polyethyleneglycol (PEG). The activation of PEG with p-NO₂-phenylchloroformate gives better biocatalysts than those obtained with cyanuric chloride-PEG in the enzymatic activity of the lipase. The chemical modification increases the stability of pure lipases in isooctane at 50 °C.     

脂肪酶在微乳液和微乳液凝胶中催化辛酸辛醇的酯化反应

脂肪酶在合成反应中具有很高的区域选择性和立体选择性 ,已广泛用于食品工业和药物工业[1,2 ] ,在有机介质中的脂肪酶催化反应已有较多研究[3 ,4 ] 。微乳液一般由表面活性剂、助表面活性剂、油和水等组份组成 ,它是一种热力学稳定、光学透明、宏观均匀而微观不均匀的体系 ,能提供酶催化所需要的巨大油 /水界面[5] 。而将脂肪酶增溶于油包水(Ｗ /Ｏ)微乳液中的纳米级“水池”中 ,可使酶以分子水平分散[6] ,图 1(ａ) ,从而可用来模拟细胞微环境中的反应。油包水微乳液中的酶可通过加入明胶而制成固定化酶 ,含明胶的微乳液凝胶 (ＭＢＧｓ)最早…     

Enhanced activity of Candida rugosa lipase modified by polyethylene glycol derivatives

The derivatives of polyethylene glycol (PEG) were prepared by reacting PEG with propylene oxide to enhance its hydrophobicity and introduce a branched structure. The PEG derivatives were activated with cyanuric chloride and used to modify the lipase fromCandida rugosa. The maximum specific activity of lipase modified with the PEG derivatives was about 2-fold of that modified with PEG for the esterification of oleic acid and lauryl alcohol in hexane.     

Esterification reactions catalyzed by lipases in microemulsions: the role of enzyme localization in relation to its selectivity

The activity of lipases from Rhizopus delemar, Rhizopus arrhizus, and Penicillium simplicissimum entrapped in microemulsions formulated by bis-(2-ethylhexyl)sulfo-succinate sodium salt (AOT) in isooctane has been studied in esterification reactions of various aliphatic alcohols with fatty acids. The effect of the nature of the fatty acids (chain length) and of the alcohols (primary, secondary, or tertiary; chain length; cyclic structures) on the lipase activities was investigated in relation to the reverse micellar structure. The lipases tested showed a selectivity regarding the structure of the substrates used when hosted in the AOT/isooctane microemulsion systems. Penicillium simplicissimum lipase showed higher reaction rates in the esterification of long chain alcohols as well as secondary alcohols. Primary alcohols had a low reaction rate and tertiary a very slow rate of esterification. Long chain fatty acids were better catalyzed as compared to the shorter ones. Rhizopus delemar and R. arrhizus lipases showed a preference for the esterification of short chain primary alcohols, while the secondary alcohols had a low rate of esterification and the tertiary ones could not be converted. The reaction of medium chain length fatty acids was also better catalyzed than in the case of the long ones. The observed lipase selectivity appeared to be related to the localization of the enzyme molecule within the micellar microstructure due to the hydrophobic/hydrophilic character of the protein. The reverse micellar structural characteristics, as well as the localization of the enzyme, were examined by fluorescence quenching measurements and spectroscopical studies. (c) 1993 John Wiley & Sons, Inc.     

Candida Rugosa Lipase Catalyzed Esterification of Racemic Ibuprofen with Butanol: Racemization of R-Ibuprofen and Chemical Hydrolysis of S-Ester Formed

The chemical treatment of products obtained from Candida rugosa lipase catalyzed enantioselective esterification of racemic ibuprofen with n-butanol in isooctane was studied. After a complete separation of the unreacted R-ibuprofen from the S-ester formed, the R-ibuprofen was racemized and the S-ester was chemically hydrolyzed to S-ibuprofen with the same enantiomeric excess as that of the ester before hydrolysis. A cyclic process of preparing S-ibuprofen from its racemate with lipase catalysis in organic solvent is therefore feasible.     

Improvement in extraction and catalytic activity of Mucor javanicus lipase by modification of AOT reverse micelle

Reverse micelles are formed in apolar solvents by spontaneous aggregation of surfactants. Surfactant sodium bis (2-ethylhexyl) sulfosuccinate (AOT) is most often used for the reverse micellar extraction of enzymes. However, the inactivation of enzyme due to strong interaction with AOT molecules is a severe problem. To overcome this problem, the AOT/water/isooctane reverse micellar system was modified by adding short chain polyethylene glycol 400 (PEG 400). The modified AOT reverse micellar system was used to extract Mucor javanicus lipase from the aqueous phase to the reverse micellar phase. The extraction efficiency (E) increased with the increase in PEG 400 addition and the maximum E in PEG 400 modified system was twofold higher than that in the PEG 400-free system. Upon addition of PEG 400, the water activity (a(w)) of aqueous phase decreased, whereas a(w) of reverse micellar phase increased. The circular dichroism spectroscopy analysis revealed that PEG 400 changes the secondary and tertiary structure of lipase. The maximum specific activity of lipase extracted in PEG 400-modified reverse micellar system was threefold higher than that in the PEG-free system.     

Pseudomonas cepacia lipase: Esterification reactions in AOT microemulsion systems

Summary The activity of purifiedPseudomonas cepacia lipase has been investigated in esterification reactions of various aliphatic alcohols with natural fatty acids. The reactions were carried out in microemulsions formed in isooctane by bis(2ethylhexyl)sulfosuccinate sodium salt (AOT). The optima pH, T and water content (w_o) for the enzyme activity in this type of microemulsions have been determined. Studies on the effect of various fatty acids and alcohols on the enzyme specificity have shown a preference of this lipase for palmitic and caprylic acid as well as for propanol, while reactions involving cyclic alcohols can not be catalyzed at all. The differences on the behavior of this lipase as compared to other lipases studied in microemulsion systems as well as in other systems are discussed.     

Synthetic activity enhancement of membrane-bound lipase from <Emphasis Type="Italic">Rhizopus chinensis</Emphasis> by pretreatment with isooctane

The cell-bound lipase from Rhizopus chinensis CCTCC M201021 with high catalysis ability for ester synthesis was located as a membrane-bound lipase by the treatments of Yatalase™ firstly. In order to improve its synthetic activity in non-aqueous phase, the pretreatments of this enzyme with various organic solvents were investigated. The pretreatment with isooctane improved evidently the lipase synthetic activity, resulting in about 139% in relative synthetic activity and 115% in activity recovery. The morphological changes of mycelia caused by organic solvent pretreatments could influence the exposure of the membrane-bound enzyme from mycelia and the exhibition of the lipase activity. The pretreatment conditions with isooctane and acetone were further investigated, and the optimum effect was obtained by the isooctane pretreatment at 4°C for 1 h, resulting in 156% in relative synthetic activity and 126% in activity recovery. When the pretreated lipases were employed as catalysts for the esterification production of ethyl hexanoate in heptane, higher initial reaction rate and higher final molar conversion were obtained using the lipase pretreated with isooctane, compared with the untreated lyophilized one. This result suggested that the pretreatment of the membrane-bound lipase with isooctane could be an effective method to substitute the lyophilization for preparing biocatalysts used in non-aqueous phase reactions.     

Catalytic behavior of Pseudomonas cepacia lipase in w/o microemulsions

The activity of purified Pseudomonas cepacia lipase has been investigated in esterification reactions of various aliphatic alcohols with natural fatty acids. The reactions were carried out in microemulsions formed in isooctane by bis-(2-ethylhexyl)sulfosuccinate sodium salt (AOT). Kinetic studies showed that the reaction follows a ping-pong bi-bi mechanism with inhibition by both substrates. The apparent kinetic parameters of the reaction were found to be K(m octanol) = 310 mM, K(m lauric acid) = 78 mM, and V(max) = 250 mumol min(-1) mg(-1). The same system was used for the synthesis of mono- and diglycerides from glycerol and lauric acid, which was successful at very low w(o) values. The catalytic behavior of P. cepacia lipase was also studied in esterification reactions performed in a nonionic microemulsion system formulated by tetraethyleneglycoldodecylether (C(12)E(4)). The optimum activity was found at about w(o) = 8. The apparent values of V(max app) and K(m app) for octanol were calculated and found to be 100 mumol min(-1) mg(-1) and 76 mM, respectively. (c) 1995 John Wiley & Sons, Inc.     

Influence of the alkyl-substituted silane precursor on sol–gel encapsulated lipase activity

Lipase from Candida rugosa was encapsulated within a chemically inert sol–gel support prepared by polycondensation of three precursor types (tetraethoxysilane (TEOS), methyltrimethoxysilane (MTMS) and polydimethylsilane (PDMS)) in the presence and absence of polyethylene glycol (PEG) and polyvinyl alcohol (PVA) as additives. Silica and their derivatives were characterised with regard to mean pore diameter, specific surface area, pore size distribution (BET method), weight loss upon heating thermogramivemetric analysis (TGA), chemical composition Fourier transform infrared spectroscopy (FT-IR), and catalytic activities. Immobilisation yields based on the recovered lipase activity vary from 3.02 to 31.98% and the highest efficiency was attained when lipase was encapsulated using TEOS in the presence of the PEG. Further information was obtained by testing the derivatives in esterification reactions and a different reactivity profile was found. Better performance was obtained with derivatives containing lipase encapsulated within gels prepared with MTMS as precursor in the presence of PEG. This lipase preparation exhibits increased esterification activity (155 μmol g⁻¹ min⁻¹), up to of three times greater than that prepared with TEOS (52 μmol g⁻¹ min⁻¹), and almost twice that prepared with MTMS/PDMS (89 μmol g⁻¹ min⁻¹) as precursors.     

Kinetic resolution of ibuprofen catalyzed by Candida rugosa lipase in ionic liquids

Candida rugosa lipase-catalyzed esterification of ibuprofen with 1-propanol was conducted in seven ionic liquids and the results were compared with those in isooctane. Although the enzyme showed comparable or higher activity in some ionic liquids compared to that in isooctane, only in the case of [BMIM]PF6 was the enantioselectivity (E = 24.1) almost twice that (E = 13.0) of isooctane. In another six ionic liquids the enzyme enantioselectivity was much poorer (E = 1.1-6.4). At the same conversion of 30%, E of [BMIM]PF6 is more than triple that of isooctane. The lipase stability in [BMIM]PF6 was improved by 25% of that in isooctane. It was concluded that [BMIM]PF6 could be applied to substitute the conventional organic solvent (isooctane) in the esterification of ibuprofen.     

Kinetic study of lipase catalyzed esterification reactions in water-in-oil microemulsions

The kinetics of the esterification of lauric acid by (-)menthol, catalyzed by Penicillium simplicissimum lipase, was studied in water/bis-(2-ethylhexyl)sulfosuccinate sodium salt (AOT)/isooctane microemulsions. Due to their low water content, microemulsions assist in reversing the direction of lipase activity, favoring synthetic reactions. The kinetics of this synthesis follows a Ping-Pong Bi--Bi mechanism. The values of all apparent kinetic parameters were determined. The theoretical model for the expression of enzymic activity in reverse micelles, proposed by Verhaert et al. (Verhaert, R., Hilhorst, R., Vermüe, M., Schaafsma, T. J., Veeger, C. 1990. Eur. J. Biochem. 187: 59-72) was extended to express the lipase activity in an esterification reaction involving two hydrophobic substrates in microemulsion systems. The model takes into account the partitioning of the substrates between the various phases and allows the calculation of the intrinsic kinetic constants. The experimental results showing the dependence of the initial velocity on the hydration ratio, W(o) = [H(2)O]/[AOT], of the reverse micelles, were in accordance with the theoretically predicted pattern. (c) 1993 John Wiley & Sons, Inc.     

非水溶剂中Rhizopus arrhizus脂肪酶催化合成三种酯的最佳条件(英文)

以少根根霉 (Rhizopusarrhizus)脂肪酶为催化剂 ,有机溶剂为反应介质 ,合成了 3种短链脂肪酸酯 .研究了反应温度、溶剂、底物浓度、底物摩尔比、吸水剂用量等因素对酯化反应的影响 .确定了3种酯的最佳合成条件 :(1)己酸乙酯 :反应温度为 4 0℃ ,环己烷为溶剂 ,0 2 5mol L底物浓度 ,酸醇摩尔比为 1∶1 2 ;(2 )乙酸异丙酯 :5 0℃ ,环己烷为溶剂 ,0 15mol L底物浓度 ,摩尔比为 1∶1;(3)乙酸异戊酯 :5 0℃ ,异辛烷为溶剂 ,0 2 0mol L底物浓度 ,摩尔比为 1∶1.三种酯合成时均需 0 12 5g ml的0 5nm分子筛为吸水剂 ,在 8h后 ,合成酯转化率达到 97%～ 99% .     

Enzymatic hydrolysis of racemic ibuprofen esters using Rhizomucor miehei lipase immobilized on different supports

This research describes the immobilization of Rhizomucor miehei lipase (RML) and chemically aminated RML (NH₂-RML) on different supports including octyl-sepharose (octyl-RML), activated sepharose with cyanogen bromide (CNBr-RML and CNBr-NH₂-RML), glyoxyl sepharose (Gx-RML and Gx-NH₂-RML) and glyoxyl sepharose dithiothreitol (Gx-DTT-RML and Gx-DTT-NH₂-RML). The highest immobilization yield was achieved for octyl-RML (>98%) followed by CNBr-RML (88%). Octyl-RML had the most specific activity (13.6) among all derivatives. The other preparations had moderate activities likely because of chemical reaction during covalent attachment of the enzyme. The catalytic behavior of lipase immobilized in hydrolysis reactions was investigated using methyl, ethyl, propyl, butyl and isobutyl-ibuprofen esters and the influence of the alkyl chain and the alcoholic residue of the ester were studied. Butyl ester was the most interesting ester for carrying out hydrolysis. The highest enantioselectivity of enzyme (E = 8.8) was obtained with isooctane/sodium phosphate buffer pH 7.0 at temperature of 40 °C. Increasing temperature from 40 to 50 °C caused decreasing in enantioselectivities and conversions. Also esterification of ibuprofen was carried out in solvent systems containing isooctane and two ionic liquids (ILs); [BMIM][PF₆] and [BMIM][BF₄]. Poor conversions and enantioselectivities were observed during esterification in all solvents.     

Enantioselective synthesis of ibuprofen esters in AOT/isooctane microemulsions by Candida cylindracea lipase

The enantioselective esterification of racemic ibuprofen, catalyzed by a Candida cylindracea lipase, was studied in a water-in-oil microemulsion (AOT/isooctane). By using n-propanol as the alcohol, an optimal W(0) ([H(2)O]/[AOT] ratio) of 12 was found for the synthesis of n-propyl-ibuprofenate at room temperature. The lipase showed high preference for the S(+)-enantiomer of ibuprofen, which was esterified to the corresponding S(+)-ibuprofen ester. The R(-)-ibuprofen remained unesterified in the microemulsion. The calculated enantioselectivity value (E) for S-ibuprofen ester was greater than 150 (conversion 0.32). The enzyme activities of n-alcohols with different chain lengths (3-12) were compared, and it appeared that short- (propanol and butanol) and long-chained (decanol and dodecanol) alcohols were better substrates than the intermediate ones (pentanol, hexanol, and octanol). However, unlike secondary and tertiary alcohols, all of the tested primary alcohols were substrates for the lipase. The reversible reaction (i.e., the hydrolysis of racemic ibuprofen ester in the microemulsion) was also carried out enantioselectively by the enzyme. Only the S form of the ester was hydrolyzed to the corresponding S-ibuprofen. The reaction yield was, however, only about 4% after 10 days of reaction. The corresponding yield for the esterification of ibuprofen was about 35% (10 days). The high enantioselectivity displayed by the lipase in the microemulsion system was seen neither in a similar esterification reaction in a pure organic solvent system (isooctane) nor in the hydrolysis reaction in an aqueous system (buffer). The E value for S-ibuprofen ester in the isooctane system was 3.0 (conversion 0.41), and only 1.3 for S-ibuprofen in the hydrolysis reaction (conversion 0.32). The differences in enantioselectivity for the lipase in various systems are likely due to interfacial phenomena. In the microemulsion system, the water in which the enzyme is dissolved is separated from the solvent by a layer of surfactant molecules, thus creating an interface with a relatively large area. Such interfaces are not present in the pure organic solvent systems (no surfactant) nor in aqueous systems. (c) 1993 John Wiley & Sons, Inc.     

Lipase-catalyzed enantioselective esterification of (S)-naproxen hydroxyalkyl ester in organic media

A lipase-catalyzed, enantioselective esterification process in organic solvents was developed for the synthesis of (S)-naproxen hydroxyalkyl ester. With the selection of lipase (Candida rugosa lipase) and reaction medium (isooctane and cyclohexane), a high enantiomeric ratio of <100 for the enzyme was obtained. 1,4-Butanediol was the best acyl acceptor. The carbon chain length of the alcohol had a major effect on the enzyme activity and enantioselectivity of lipase-catalyzed esterification.     

Immobilization by Adsorption of Hydrophobic Lipase Derivatives to Porous Polymer Beads for Use in Ester Synthesis

A novel procedure for attaching lipase to certain kinds of hydrophobic surfaces is described. The procedure involves covalent derivatization of the protein molecule by reaction in solution with a hydrophobic imidoester, aldehyde or activated polyethylene glycol. The resulting protein derivative is then allowed to adsorb onto an insoluble hydrophobic surface. Quantitative adsorption is observed and the enzyme is bound very strongly on the support The number and nature of the hydrophobic substituents introduced in the chemical derivatization step can be easily controlled. The adsorption step occurs spontaneously upon exposure of the modified protein to a variety of hydrophobic materials. The hydrophobic lipase derivative obtained by reaction with PEG activated with p-nirrophenyl chloroformate, for example, adsorbs readily onto polyacrylate and polystyrene beads, with most of its esterification activity in organic solvent intact. Its thermostability is also greatly enhanced. Derivatization of lipase with hydrophobic groups greatly enhances its esterification activity in organic solvent, and its immobilization in this manner enables the preparation of a highly reactive biocatalyst for biotechnological application.     

Stereoselective esterification of dl-menthol by polyurethane-entrapped lipase in organic solvent

Stereospecific esterification of dl-menthol was studied by the use of immobilized lipase in an adequate water-saturated organic solvent system. Lipase from Candida cylindracea immobilized by entrapment with urethane prepolymers and 5-phenylvaleric acid as the acyl donor were chosen based on the stereoselectivity and the yield of l-menthyl ester. Water-saturated cyclohexane or isooctane was found to be the most suitable solvent system. Entrapment significantly enhanced the operational stability of lipase.     

Ester synthesis catalyzed by polyethylene glycol-modified lipase in benzene

Lipoprotein lipase, which catalyzes hydrolysis of emulsified triglycerides or water-insoluble esters, was modified with 2,4-bis(o-methoxy-polyethylene glycol)-6-chloro-s-triazine(activated PEG2). The modified lipase, in which 55% of the total amino groups in the lipase molecule, was soluble in organic solvents such as benzene, toluene, chloroform and dioxane. The modified lipase could catalyze ester synthesis reaction in benzene. When very hydrophobic substrates of lauryl alcohol and stearic acid were used, the ester synthesis reaction proceeded efficiently in the transparent benzene solution with the maximum activity of approximate 5.0 mumoles/min/mg of protein. Ester exchange and aminolysis reactions were also conducted with the modified lipase in benzene.     

Immobilization of Rhizopus oryzae lipase on magnetic Fe3O4-chitosan beads and its potential in phenolic acids ester synthesis

A novel and simple method was developed for the preparation of magnetic Fe₃O₄ nanoparticles by chemical co-precipitation method and subsequent coating with 3-aminopropyltrimethoxysilane (APTMS) through silanization process. Magnetic Fe₃O₄-chitosan particles were prepared by the suspension cross-linking and covalent technique to be used in the application of magnetic carrier technology. The synthesized immobilization supports were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and X-ray diffraction (XRD). Using glutaraldehyde as the coupling agent, the lipase from R. oryzae was successfully immobilized onto the functionalized magnetic Fe₃O₄-chitosan beads. The results showed that 86.60% of R. oryzae lipase was bound on the synthesized immobilization support. This immobilized lipase was successfully used for the esterification of phenolic acid which resulted in esterification of phenolic acid in isooctane solvent reaction system for 8 consecutive cycles (totally 384 h), 72.6% of its initial activity was retained, indicating a high stability in pharmaceutical and industrial applications.