Thermodynamics of glucagon aggregation.

Heats of dilution of concentrated glucagon solutions have been measured calorimetrically at 10 and 25 degrees C in 0.2 M potassium phosphate buffer of pH 10.6. Analysis of the data in terms of a monomer-trimer equilibrium gives the following thermodynamic parameters for the association reaction at 25 degrees C: delta G degrees = 7.34 kcal/mol of trimer, delta H degrees = -31.2 kcal/mol, deltaS degrees = -80 cal/(K mol), deltaCp = 430 cal/(K mol). The sensitivity of heat of dilution data to the association constant and stoichiometry of the reaction is discussed.     

Detergent-like action of the antibiotic peptide surfactin on lipid membranes

Surfactin is a bacterial lipopeptide with powerful surfactant-like properties. High-sensitivity isothermal titration calorimetry was used to study the self association and membrane partitioning of surfactin. The critical micellar concentration (CMC), was 7.5 microM, the heat of micellization was endothermic with DeltaH(w-->m)(Su) = +4.0 kcal/mol, and the free energy of micellization DeltaG(O,w-->m)(Su) = -9.3 kcal/mol (25 degrees C; 100 mM NaCl; 10 mM TRIS, 1 mM EDTA; pH 8.5). The specific heat capacity of micellization was deduced from temperature dependence of DeltaH(w-->m)(Su) as DeltaC(w-->m)(P) = -250 +/- 10 cal/(mol.K). The data can be explained by combining the hydrophobicity of the fatty acyl chain with that of the hydrophobic amino acids. The membrane partition equilibrium was studied using small (30 nm) and large (100 nm) unilamellar POPC vesicles. At 25 degrees C, the partition coefficient, K, was (2.2 +/- 0.2) x 10(4) M(-1) for large vesicles leading to a free energy of DeltaG(O, w-->b)(Su) = -8.3 kcal/mol. The partition enthalpy was again endothermic, with DeltaH(w-->b)(Su) = 9 +/- 1 kcal/mol. The strong preference of surfactin for micelle formation over membrane insertion explains the high membrane-destabilizing activity of the peptide. For surfactin and a variety of non-ionic detergents, the surfactant-to-lipid ratio, inducing membrane solubilization, R(sat)(b), can be predicted by the simple relationship R(sat)(b) approximately K. CMC.     

Thermodynamic roles of basic amino acids in statherin recognition of hydroxyapatite

Salivary statherin is a highly acidic, 43 amino acid residue protein that functions as an inhibitor of primary and secondary crystallization of the biomineral hydroxyapatite. The acidic domain at the N-terminus was previously shown to be important in the binding of statherin to hydroxyapatite surfaces. This acidic segment is followed by a basic segment whose role is unclear. In this study, the role of the basic amino acids in the hydroxyapatite adsorption thermodynamics has been determined using isothermal titration calorimetry and equilibrium adsorption isotherm analysis. Single point mutations of the basic side chains to alanine lowered the binding affinity to the surface but did not perturb the maximal surface coverage and the adsorption enthalpy. The structural and dynamic properties of the single point mutants as characterized by solid-state NMR techniques were not altered either. Simultaneous replacement of all four basic amino acids with alanine lowered the adsorption equilibrium constant by 5-fold and the maximal surface coverage by nearly 2-fold. The initial exothermic phase of adsorption exhibited by native statherin is preserved in this mutant, along with the alpha-helical structure and the dynamic properties of the N-terminal domain. These results help to refine the two binding site model of statherin adsorption proposed earlier in our study of wild-type statherin (Goobes, R., Goobes, G., Campbell, C.T., and Stayton, P.S. (2006) Biochemistry 45, 5576-5586). The basic charges function to reduce protein-protein charge repulsion on the HAP surface, and in their absence, there is a considerable decrease in statherin packing density on the surface at binding saturation.     

Thermal and urea-induced unfolding of the marginally stable lac repressor DNA-binding domain: a model system for analysis of solute effects on protein processes

Thermodynamic and structural evidence indicates that the DNA binding domains of lac repressor (lacI) exhibit significant conformational adaptability in operator binding, and that the marginally stable helix-turn-helix (HTH) recognition element is greatly stabilized by operator binding. Here we use circular dichroism at 222 nm to quantify the thermodynamics of the urea- and thermally induced unfolding of the marginally stable lacI HTH. Van't Hoff analysis of the two-state unfolding data, highly accurate because of the large transition breadth and experimental access to the temperature of maximum stability (T(S); 6-10 degrees C), yields standard-state thermodynamic functions (deltaG(o)(obs), deltaH(o)(obs), deltaS(o)(obs), deltaC(o)(P,obs)) over the temperature range 4-40 degrees C and urea concentration range 0 相似文献   

Thermodynamics of sodium dodecyl sulfate partitioning into lipid membranes

The partition equilibria of sodium dodecyl sulfate (SDS) and lithium dodecyl sulfate between water and bilayer membranes were investigated with isothermal titration calorimetry and spectroscopic methods (light scattering, (31)P-nuclear magnetic resonance) in the temperature range of 28 degrees C to 56 degrees C. The partitioning of the dodecyl sulfate anion (DS(-)) into the bilayer membrane is energetically favored by an exothermic partition enthalpy of Delta H(O)(D) = -6.0 kcal/mol at 28 degrees C. This is in contrast to nonionic detergents where Delta H(O)(D) is usually positive. The partition enthalpy decreases linearly with increasing temperature and the molar heat capacity is Delta C(O)(P) = -50 +/- 3 cal mol(-1) K(-1). The partition isotherm is nonlinear if the bound detergent is plotted versus the free detergent concentration in bulk solution. This is caused by the electrostatic repulsion between the DS(-) ions inserted into the membrane and those free in solution near the membrane surface. The surface concentration of DS(-) immediately above the plane of binding was hence calculated with the Gouy-Chapman theory, and a strictly linear relationship was obtained between the surface concentration and the extent of DS(-) partitioning. The surface partition constant K describes the chemical equilibrium in the absence of electrostatic effects. For the SDS-membrane equilibrium K was found to be 1.2 x 10(4) M(-1) to 6 x 10(4) M(-1) for the various systems and conditions investigated, very similar to data available for nonionic detergents of the same chain length. The membrane-micelle phase diagram was also studied. Complete membrane solubilization requires a ratio of 2.2 mol SDS bound per mole of total lipid at 56 degrees C. The corresponding equilibrium concentration of SDS free in solution is C (sat)(D,F) approximately 1.7 mM and is slightly below the critical micelles concentration (CMC) = 2.1 mM (at 56 degrees C and 0.11 M buffer). Membrane saturation occurs at approximately 0.3 mol SDS per mol lipid and the equilibrium SDS concentration is C (sat)(D,F)approximately equal 2.2 mM +/- 0.6 mM. SDS translocation across the bilayer is slow at ambient temperature but increases at high temperatures.     

Structural and thermodynamic aspects of the interaction between heparan sulfate and analogues of melittin

Melittin is an amphipathic cationic peptide derived from honeybee venom with well-known cytolytic and antimicrobial properties. When coupled to cationic polymers or lipid molecules, it forms conjugates with high transfection efficiency and low toxicity with promising applications in gene therapy. A first step in the internalization of melittin and its conjugates is their binding to the cell surface, a reaction likely to involve heparan sulfate proteoglycans (HSPG). In the present work, we characterize the binding equilibrium of heparan sulfate (HS) with two melittin analogues, [Cys(1)]melittin (mel-SH) and retro-inverso [Cys(1)]melittin (ri-mel-SH). The terminal cysteine found in these peptides replaces the N-terminal glycine present in native melittin and allows covalent binding to other molecules. Isothermal titration calorimetry (ITC) reveals a high affinity of each melittin analogue to HS. Association constants of 4.7 x 10(4) and 3.5 x 10(5) M(-)(1) are found at physiological ionic strength and 15 degrees C for ri-mel-SH and mel-SH, respectively. The reaction enthalpy measured under these conditions is DeltaH(degrees)pep= 4.2 kcal/mol for ri-mel-SH and DeltaH(degrees)pep= 1.1 kcal/mol for mel-SH. The peptide-to-HS stoichiometry is approximately 20 for ri-mel-SH and approximately 14 for mel-SH under the same conditions. Temperature dependence studies using ri-mel-SH (mel-SH) show that DeltaH(degrees)pep decreases in magnitude upon increase in temperature, which results in a molar heat capacity of DeltaH(degrees)pep= -322 cal mol(-)(1) K(-)(1) (-45 cal mol(-)(1) K(-)(1)). Such a negative heat capacity change is not expected for a purely electrostatic interaction and indicates that hydrophobic and other interactions are also involved in the binding equilibrium. Salt dependence studies of the binding constants confirm that nonelectrostatic forces are an important component of the HS-melittin interaction. Binding to HS induces conformational changes in both peptides, with ri-mel-SH showing a 6-fold increase of the alpha-helix content when incubated with HS under saturation conditions.     

Association entropy in adsorption processes

The association of two species to form a bound complex, e.g., the binding of a ligand to a protein or the adsorption of a peptide on a lipid membrane, involves an entropy loss, reflecting the conversion of free translational and rotational degrees of freedom into bound motions. Previous theoretical estimates of the standard entropy change in bimolecular binding processes, DeltaS(o), have been derived from the root-mean-square fluctuations in protein crystals, suggesting DeltaS(o) approximately -50 e.u., i.e., TDeltaS degrees approximately -25 kT = -15 kcal/mol. In this work we focus on adsorption, rather than binding processes. We first present a simple statistical-thermodynamic scheme for calculating the adsorption entropy, including its resolution into translational and rotational contributions, using the known distance-orientation dependent binding (adsorption) potential. We then utilize this scheme to calculate the free energy of interaction and entropy of pentalysine adsorption onto a lipid membrane, obtaining TDeltaS(o) approximately -1.7 kT approximately -1.3 kcal/mol. Most of this entropy change is due to the conversion of one free translation into a bound motion, the rest arising from the confinement of two rotational degrees of freedom. The smaller entropy loss in adsorption compared to binding processes arises partly because a smaller number of degrees of freedom become restricted, but mainly due to the fact that the binding potential is much "softer."     

A Synthetic Peptide Based on a Natural Salivary Protein Reduces Demineralisation in Model Systems for Dental Caries and Erosion

The salivary protein statherin is an inhibitor of spontaneous and secondary precipitation of hydroxyapatite (HAp). It is also detected in enamel pellicle. The N-terminal region of statherin is involved in its adsorption onto tooth surfaces, and, calcium binding. A peptide (StN21) was designed with a 21 amino acid sequence identical to the N-terminus of statherin. The aim was to measure the effect of StN21 on the rate of mineral loss in a model system for dental caries and erosion using HAp subjected to artificial carious and erosive conditions. StN21 was synthesised using Fmoc chemistry. A surface of each HAp block was exposed to solution containing StN21 at concentrations 9.4–376 μmol L⁻¹ (in phosphate buffer) for 24 h. Controls were HAp exposed to buffer only, and HAp exposed to lysozyme. Demineralising solution (0.1 mol L⁻¹ acetic acid, pH 4.5, 1.0 mmol L⁻¹ calcium and 0.6 mmol L⁻¹ phosphate) was circulated past the HAp blocks at 0.4 mL min^-1 to mimic carious and erosive conditions. Scanning microradiography was used to measure the rate of mineral loss for demineralisation periods of 3 weeks. The rate of mineral loss of the samples exposed to StN21 was reduced by ∼40% compared to the controls, but no dependence on the concentration of StN21 was observed at the concentrations used. StN21 has been shown to be a potent and stable peptide that has potential as a preventive/therapeutic agent in the treatment of enamel erosion and dental caries.     

Energetic basis of molecular recognition in a DNA aptamer

The thermal stability and ligand binding properties of the L-argininamide-binding DNA aptamer (5'-GATCGAAACGTAGCGCCTTCGATC-3') were studied by spectroscopic and calorimetric methods. Differential calorimetric studies showed that the uncomplexed aptamer melted in a two-state reaction with a melting temperature T(m)=50.2+/-0.2 degrees C and a folding enthalpy DeltaH(0)(fold)=-49.0+/-2.1 kcal mol(-1). These values agree with values of T(m)=49.6 degrees C and DeltaH(0)(fold)=-51.2 kcal mol(-1) predicted for a simple hairpin structure. Melting of the uncomplexed aptamer was dependent upon salt concentration, but independent of strand concentration. The T(m) of aptamer melting was found to increase as L-argininamide concentrations increased. Analysis of circular dichroism titration data using a single-site binding model resulted in the determination of a binding free energy DeltaG(0)(bind)=-5.1 kcal mol(-1). Isothermal titration calorimetry studies revealed an exothermic binding reaction with DeltaH(0)(bind)=-8.7 kcal mol(-1). Combination of enthalpy and free energy produce an unfavorable entropy of -TDeltaS(0)=+3.6 kcal mol(-1). A molar heat capacity change of -116 cal mol(-1) K(-1) was determined from calorimetric measurements at four temperatures over the range of 15-40 degrees C. Molecular dynamics simulations were used to explore the structures of the unligated and ligated aptamer structures. From the calculated changes in solvent accessible surface areas of these structures a molar heat capacity change of -125 cal mol(-1) K(-1) was calculated, a value in excellent agreement with the experimental value. The thermodynamic signature, along with the coupled CD spectral changes, suggest that the binding of L-argininamide to its DNA aptamer is an induced-fit process in which the binding of the ligand is thermodynamically coupled to a conformational ordering of the nucleic acid.     

Binding of berberine to human telomeric quadruplex - spectroscopic, calorimetric and molecular modeling studies

This study examines the characteristics of binding of berberine to the human telomeric d[AG(3)(T(2)AG(3))(3)] quadruplex. By employing UV-visible spectroscopy, fluorescence spectroscopy and isothermal titration calorimetry, we found that the binding affinity of berberine to the human telomeric quadruplex is 10(6). The complete thermodynamic profile for berberine binding to the quadruplex, at 25 degrees C, shows a small negative enthalpy (DeltaH) of -1.7 kcal.mol(-1), an entropy change with TDeltaS of +6.5 kcal.mol(-1), and an overall favorable free energy (DeltaG) of -8.2 kcal.mol(-1) .Through the temperature dependence of DeltaH, we obtained a heat capacity (DeltaC(p)) of -94 (+/- 5) cal.mol(-1).K(-1). The osmotic stress method revealed that there is an uptake of 13 water molecules in the complex relative to the free reactants. Furthermore, the molecular modeling studies on different quadruplex-berberine complexes show that berberine stacking at the external G-quartet is mainly aided by the pi-pi interaction and the stabilization of the high negative charge density of O6 of guanines by the positively charged N7 of berberine. The theoretical heat capacity (DeltaC(p)) values for quadruplex-berberine models are -89 and -156 cal.mol(-1).K(-1).     

Thermodynamic analysis of the structural stability of phage 434 Cro protein

Thermodynamic parameters describing the phage 434 Cro protein have been determined by calorimetry and, independently, by far-UV circular dichroism (CD) measurements of isothermal urea denaturations and thermal denaturations at fixed urea concentrations. These equilibrium unfolding transitions are adequately described by the two-state model. The far-UV CD denaturation data yield average temperature-independent values of 0.99 +/- 0.10 kcal mol(-)(1) M(-)(1) for m and 0.98 +/- 0.05 kcal mol(-)(1) K(-)(1) for DeltaC(p)()(,U), the heat capacity change accompanying unfolding. Calorimetric data yield a temperature-independent DeltaC(p)()(,U) of 0.95 +/- 0.30 kcal mol(-)(1) K(-)(1) or a temperature-dependent value of 1.00 +/- 0.10 kcal mol(-)(1) K(-)(1) at 25 degrees C. DeltaC(p)()(,U) and m determined for 434 Cro are in accord with values predicted using known empirical correlations with structure. The free energy of unfolding is pH-dependent, and the protein is completely unfolded at pH 2.0 and 25 degrees C as judged by calorimetry or CD. The stability of 434 Cro is lower than those observed for the structurally similar N-terminal domain of the repressor of phage 434 (R1-69) or of phage lambda (lambda(6)(-)(85)), but is close to the value reported for the putative monomeric lambda Cro. Since a protein's structural stability is important in determining its intracellular stability and turnover, the stability of Cro relative to the repressor could be a key component of the regulatory circuit controlling the levels and, consequently, the functions of the two proteins in vivo.     

Global effects of the energetics of coenzyme binding: NADPH controls the protein interaction properties of human cytochrome P450 reductase

The thermodynamics of coenzyme binding to human cytochrome P450 reductase (CPR) and its isolated FAD-binding domain have been studied by isothermal titration calorimetry. Binding of 2',5'-ADP, NADP(+), and H(4)NADP, an isosteric NADPH analogue, is described in terms of the dissociation binding constant (K(d)), the enthalpy (DeltaH(B)) and entropy (TDeltaS(B)) of binding, and the heat capacity change (DeltaC(p)). This systematic approach allowed the effect of coenzyme redox state on binding to CPR to be determined. The recognition and stability of the coenzyme-CPR complex are largely determined by interaction with the adenosine moiety (K(d2)(')(,5)(')(-ADP) = 76 nM), regardless of the redox state of the nicotinamide moiety. Similar heat capacity change (DeltaC(p)) values for 2',5'-ADP (-210 cal mol(-)(1) K(-)(1)), NADP(+) (-230 cal mol(-)(1) K(-)(1)), and H(4)NADP (-220 cal mol(-)(1) K(-)(1)) indicate no significant contribution from the nicotinamide moiety to the binding interaction surface. The coenzyme binding stoichiometry to CPR is 1:1. This result validates a recently proposed one-site kinetic model [Daff, S. (2004) Biochemistry 43, 3929-3932] as opposed to a two-site model previously suggested by us [Gutierrez, A., Lian, L.-Y., Wolf, C. R., Scrutton, N. S., and Roberts, C. G. K. (2001) Biochemistry 40, 1964-1975]. Calorimetric studies in which binding of 2',5'-ADP to CPR (TDeltaS(B) = -13400 +/- 200 cal mol(-)(1), 35 degrees C) was compared with binding of the same ligand to the isolated FAD-binding domain (TDeltaS(B) = -11200 +/- 300 cal mol(-)(1), 35 degrees C) indicate that the number of accessible conformational substates of the protein increases upon 2',5'-ADP binding in the presence of the FMN-binding domain. This pattern was consistently observed along the temperature range that was studied (5-35 degrees C). This contribution of coenzyme binding energy to domain dynamics in CPR agrees with conclusions from previous temperature-jump studies [Gutierrez, A., Paine, M., Wolf, C. R., Scrutton, N. S., and Roberts, G. C. K. (2002) Biochemistry 41, 4626-4637]. A combination of calorimetry and stopped-flow spectrophotometry kinetics experiments showed that this linkage between coenzyme binding energetics and diffusional domain motion impinges directly on the molecular recognition of cytochrome c by CPR. Single-turnover reduction of cytochrome c by CPR (k(max) = 15 s(-)(1), K(d) = 37 microM) is critically coupled to coenzyme binding through ligand-induced motions that enable the FMN-binding domain to overcome a kinetically unproductive conformation. This is remarkable since the FMN-binding domain is not directly involved in coenzyme binding, the NADP(H) binding site being fully contained in the FAD-binding domain. Sequential rapid mixing measurements indicate that harnessing of coenzyme binding energy to the formation of a kinetically productive CPR-cytochrome c complex is a highly synchronized event. The inferred half-time for the decay of this productive conformation (tau(50)) is 330 +/- 70 ms only. Previously proposed structural and kinetic models are discussed in light of these findings.     

Cyanate binding to the ferric heme octapeptide from cytochrome c. A model for anion binding to high spin ferric hemoproteins

Equilibrium constants for the binding of cyanate to the ferric heme c octapeptide in 50% ethylene glycol, 50% aqueous buffer were measured spectrophotometrically. Equilibrium constants measured at several temperatures from -20 degrees C to 0 degrees C exhibited an apparent van't Hoff relationship yielding thermodynamic values of delta Ho = -1.3 X 10(3) +/- 0.9 X 10(3) J/mol (-3.1 X 10(2) +/- 2 X 10(2) cal/mol), delta So = -3 +/- 3 J/K X mol (-0.6 +/- 0.8 cal/K X mol). The equilibrium constant for cyanate binding at 25 degrees C and pH 7.4 is 1.21 which is approximately 2 to 3 orders of magnitude lower than that observed for cyanate binding to methemoglobin and metmyoglobin. Krel, the ratio of the hemoprotein to model heme octapeptide binding constants, for NCO- is smaller than Krel for N3- suggesting that hydrogen bonding between the terminal ligand atoms and the distal histidine in hemoglobin and myoglobin does not contribute to the increased protein ligand stabilization observed for these anions relative to the model. A donor-acceptor interaction between the distal histidine and the electrophilic middle atoms of these bound ligands is proposed.     

alpha-Amylase adsorption on starch crystallites

The goal of this work was to characterize the adsorption of Bacillus subtills alpha-amylase onto crystalline starchy materials of the B-type polymorph. Monodisperse spherulitic particles (R z6; 5.0 mum), essentially resistant to alpha-amylolysis at 25 degrees C were prepared from short amylose chains (DP(n) approximately 15). The alpha-amylase adsorbed specifically onto the spherulites, and adsorption was found to be a prerequisite step for hydrolysis. Adsorption was inhibited by the presence of maltose and maltotriose in the reaction mixture. Adsorption isotherm of the enzyme on the particles showed a well developed plateau of 1.62 mug/cm(2) at 25 degrees C corresponding to a monolayer adsorption process. The binding free energy calculated from the initial slope of the isotherm was DeltaG approximately -20.7 kJ/mol. This is smaller than published values for the binding of alpha-amylase to soluble amylosic chains (DeltaG < -30 kJ/mol).     

On the Adsorption of Human Acidic Proline-rich Proteins (PRP-1 and PRP-3) and Statherin at Solid/liquid Interfaces

The objective of the present study was to investigate the adsorption of PRP-1, PRP-3 and statherin to solid surfaces in terms of dependence on concentration, the presence of electrolyte and surface wettability. Time resolved in situ ellipsometry was used to determine the adsorbed amounts and adsorption rates of pure PRP-1, PRP-3 and statherin onto pure (hydrophilic) and methylated (hydrophobized) silica surfaces. The initial film build-up was fast and plateaus were reached within 10 min at all concentrations for both types of surfaces and all proteins. The observed adsorption and calculated diffusion rates of PRP-1, PRP-3 and statherin, respectively, indicated that the initial adsorption was mass transport controlled at low concentrations. At hydrophobic surfaces, isotherm shapes and adsorbed amounts were similar for PRP-1 and PRP-3, while statherin adsorbed to a higher extent. At hydrophilic surfaces only PRP-1 adsorbed substantially, while for PRP-3 and statherin adsorbed amounts were low. The presence of Ca 2+ ions in the phosphate buffer solution increased the adsorption of statherin and PRP-3 on hydrophobic surfaces, while PRP-1 was unaffected. On hydrophilic surfaces, all three proteins adsorbed in higher amounts in NaCl, compared to CaCl 2 at similar ionic strength. It is concluded that acidic PRPs (PRP-1 and PRP-3) and statherin readily form films on a variety of materials and solution conditions, showing that their functions may be fulfilled under a wide range of conditions.     

Tyrosine sulfation of statherin

Tyrosylprotein sulfotransferase (TPST), responsible for the sulfation of a variety of secretory and membrane proteins, has been identified and characterized in submandibular salivary glands (William et al. Arch Biochem Biophys 1997; 338: 90-96). In the present study we demonstrate the sulfation of a salivary secretory protein, statherin, by the tyrosylprotein sulfotransferase present in human saliva. Optimum statherin sulfation was observed at pH 6.5 and at 20 mm MnCl(2). Increase in the level of total sulfation was observed with increasing statherin concentration. The K(m)value of tyrosylprotein sulfotransferase for statherin was 40 microM. Analysis of the sulfated statherin product on SDS-polyacrylamide gel electrophoresis followed by autoradiography revealed (35)S-labelling of a 5 kDa statherin. Further analysis of the sulfated statherin revealed the sulfation on tyrosyl residue. This study is the first report demonstrating tyrosine sulfation of a salivary secretory protein. The implications of this sulfation of statherin in hydroxyapatite binding and Actinomyces viscosus interactions are discussed.     

Stability and binding properties of wild-type and c17s mutated human sterol carrier protein 2.

The temperature- and solvent-induced denaturation of both the SCP2 wild-type and the mutated protein c71s were studied by CD measurements at 222 nm. The temperature-induced transition curves were deconvoluted according to a two-state mechanism resulting in a transition temperature of 70.5 degrees C and 59.9 degrees C for the wild-type and the c71s, respectively, with corresponding values of the van't Hoff enthalpies of 183 and 164 kJ/mol. Stability parameters characterizing the guanidine hydrochloride denaturation curves were also calculated on the basis of a two-state transition. The transitions of the wild-type occurs at 0.82 M GdnHCl and that of the c71s mutant at 0.55 M GdnHCl. These differences in the half denaturation concentration of GdnHCl reflect already the significant stability differences between the two proteins. A quantitative measure are the Gibbs energies DeltaG(0)(D)(buffer) at 25 degrees C of 15.5 kJ/mol for the wild-type and 8.0 kJ/mol for the mutant. We characterized also the alkyl chain binding properties of the two proteins by measuring the interaction parameters for the complex formation with 1-O-Decanyl-beta-D-glucoside using isothermal titration microcalorimetry. The dissociation constants, K(d), for wild-type SCP2 are 335 microM at 25 degrees C and 1.3 mM at 35 degrees C. The corresponding binding enthalpies, DeltaH(b), are -21. 5 kJ/mol at 25 degrees C and 72.2 kJ/mol at 35 degrees C. The parameters for the c71s mutant at 25 degrees C are K(d)=413 microM and DeltaH(b)=16.6 kJ/mol. These results suggest that both SCP2 wild-type and the c71s mutant bind the hydrophobic compound with moderate affinity.     

Solution- and Adsorbed-State Structural Ensembles Predicted for the Statherin-Hydroxyapatite System

We have developed a multiscale structure prediction technique to study solution- and adsorbed-state ensembles of biomineralization proteins. The algorithm employs a Metropolis Monte Carlo-plus-minimization strategy that varies all torsional and rigid-body protein degrees of freedom. We applied the technique to fold statherin, starting from a fully extended peptide chain in solution, in the presence of hydroxyapatite (HAp) (001), (010), and (100) monoclinic crystals. Blind (unbiased) predictions capture experimentally observed macroscopic and high-resolution structural features and show minimal statherin structural change upon adsorption. The dominant structural difference between solution and adsorbed states is an experimentally observed folding event in statherin's helical binding domain. Whereas predicted statherin conformers vary slightly at three different HAp crystal faces, geometric and chemical similarities of the surfaces allow structurally promiscuous binding. Finally, we compare blind predictions with those obtained from simulation biased to satisfy all previously published solid-state NMR (ssNMR) distance and angle measurements (acquired from HAp-adsorbed statherin). Atomic clashes in these structures suggest a plausible, alternative interpretation of some ssNMR measurements as intermolecular rather than intramolecular. This work demonstrates that a combination of ssNMR and structure prediction could effectively determine high-resolution protein structures at biomineral interfaces.