Synthesis of N-carboxyalkyl and N-aminoalkyl functionalized dipeptide building units for the assembly of backbone cyclic peptides.

To improve the assembly of backbone cyclic peptides, N-functionalized dipeptide building units were synthesized. The corresponding N-aminoalkyl or N-carboxyalkyl amino acids were formed by alkylation or reductive alkylation of amino acid benzyl or tert-butyl esters. In the case of N-aminoalkyl amino acid derivatives the aldehydes for reductive alkylation were obtained from N,O-dimethyl hydroxamates of N-protected amino acids by reduction with LiAlH4. N-carboxymethyl amino acids were synthesized by alkylation using bromoacetic acid ester and the N-carboxyethyl amino acids via reductive alkylation using aldehydes derived from formyl Meldrums acid. Removal of the carboxy protecting group leads to free N-alkyl amino acids of very low solubility in organic solvents, allowing efficient purification by extraction of the crude product. These N-alkyl amino acids were converted to their tetramethylsilane-esters by silylation with N,O-bis-(trimethylsilyl)acetamide and could thus be used for the coupling with Fmoc-protected amino acid chlorides or fluorides. To avoid racemization the tert-butyl esters of N-alkyl amino acids were coupled with the Fmoc-amino acid halides in the presence of the weak base collidine. Both the N-aminoalkyl and N-carboxyalkyl functionalized dipeptide building units could be obtained in good yield and purity. For peptide assembly on the solid support, the allyl type protection of the branching moiety turned out to be most suitable. The Fmoc-protected N-functionalized dipeptide units can be used like any amino acid derivative under the standard conditions for Fmoc-solid phase synthesis.     

Novel method for the synthesis of urea backbone cyclic peptides using new Alloc‐protected glycine building units

Cyclization of bioactive peptides, utilizing functional groups serving as natural pharmacophors, is often accompanied with loss of activity. The backbone cyclization approach was developed to overcome this limitation and enhance pharmacological properties. Backbone cyclic peptides are prepared by the incorporation of special building units, capable of forming amide, disulfide and coordinative bonds. Urea bridge is often used for the preparation of cyclic peptides by connecting two amine functionalized side chains. Here we present urea backbone cyclization as an additional method for the preparation of backbone cyclic peptide libraries. A straightforward method for the synthesis of crystalline Fmoc‐N^α [ω‐amino(Alloc)‐alkyl] glycine building units is presented. A set of urea backbone cyclic Glycogen Synthase Kinase 3 analogs was prepared and assessed for protein kinase B inhibition as anticancer leads. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Synthesis of novel protected Nalpha(omega-thioalkyl) amino acid building units and their incorporation in backbone cyclic disulfide and thioetheric bridged peptides.

General methods for the preparation of protected Nalpha(omega-thioalkyl) amino acids building units for backbone cyclization using reductive alkylation and on-resin preparation are described. The synthesis of non-Gly Fmoc-protected S-functionalized N-alkylated amino acids is based on the reaction of readily prepared protected omega-thio aldehyde with the appropriate amino acid. Preparation of Fmoc-protected S-functionalized N-alkylated Gly building units was carried out using two methods: reaction of glyoxylic acid with Acm-thioalkylamine and an on-resin reaction of bromoacetyl resin with Trt-thioalkylamines. Three model peptides were prepared using these building units. The GlyS2 building unit was incorporated into a backbone cyclic analog of somatostatin that contains a disulfide bridge. Formation of the disulfide bridge was performed by on-resin oxidation using 12 or Tl(CF3COO-)3. Both methods resulted in the desired product in a high degree of purity in the crude. The AspS3 building unit was also successfully incorporated into a model peptide. In addition, the in situ generation of sulfur containing Gly building units was demonstrated on a Substance P backbone cyclic analog containing a thioether bridge.     

Synthesis of different types of dipeptide building units containing N- or C-terminal arginine for the assembly of backbone cyclic peptides.

Different types of dipeptide building units containing N- or C-terminal arginine were prepared for synthesis of the backbone cyclic analogues of the peptide hormone bradykinin (BK: Arg-Pro-Pro-Gly-Phe-Ser-Pro-Phe-Arg). For cyclization in the N-terminal sequence N-carboxyalkyl and N-aminoalkyl functionalized dipeptide building units were synthesized. In order to avoid lactam formation during the condensation of the N-terminal arginine to the N-alkylated amino acids at position 2, the guanidino function has to be deprotected. The best results were obtained by coupling Z-Arg(Z)2-OH with TFFH/collidine in DCM. Another dipeptide building unit with an acylated reduced peptide bond containing C-terminal arginine was prepared to synthesize BK-analogues with backbone cyclization in the C-terminus. To achieve complete condensation to the resin and to avoid side reactions during activation of the arginine residue, this dipeptide unit was formed on a hydroxycrotonic acid linker. HYCRAM technology was applied using the Boc-Arg(Alloc)2-OH derivative and the Fmoc group to protect the aminoalkyl function. The reduced peptide bond was prepared by reductive alkylation of the arginine derivative with the Boc-protected amino aldehyde, derived from Boc-Phe-OH. The best results for condensation of the branching chain to the reduced peptide bond were obtained using mixed anhydrides. Both types of dipeptide building units can be used in solid-phase synthesis in the same manner as amino acid derivatives.     

Novel Gly building units for backbone cyclization: synthesis and incorporation into model peptides

We report the preparation of novel building units for backbone cyclization that have the general formula Fmoc-N[CH(R)CO₂Al]Gly-OH. These building units were prepared by the reductive alkylation method using allyl esters of several amino acids as starting material and hence, respectively, contain the side chain of these amino acids. These N-alkylated Gly building units were incorporated in model backbone cyclic peptides. The resulting crude backbone cyclic peptides were obtained in high degree of purity according to HPLC and mass spectrometric analyses.     

Studies on cyclic peptides. II. Synthesis of cyclic peptides containing sarcosine.

Cyclic peptides containing sarcosine, cyclo-(Pro-Sar-Gly)₂, cyclo-(Sar-Sar-Gly)₂, cyclo-(Sar₄), and cyclo-(Sar₆) have been synthesized by the cyclization of the p-nitrophenyl ester of linear peptides. The tert-butoxycarbonyl group was used as the N^α-protecting group, which was removed by acid. Benzyl ester was used to protect the C-terminal. tert-butoxycarbonylpeptide was obtained by the stepwise elongation of the peptide bond by the carbodiimide method. Deblocking and cyclization of the linear peptides gave the cyclic peptides.     

Developing potent backbone cyclic peptides bearing the shared epitope sequence as rheumatoid arthritis drug-leads

Rheumatoid arthritis (RA) is a common human leukocyte antigen-associated disease. Most RA patients have a five-residue sequence motif called the shared epitope (SE) in the DRβ-chain of the HLA-DRB1 protein. The SE was found to activate nitric oxide (NO) production, suggesting a possible mechanism for RA development. The native conformation of the SE is presumed to be an α-helix, thus using cyclic peptides to stabilize this conformation may produce a potent SE mimetic which will have drug-like properties. We present the development of a backbone cyclic SE mimetic that activates NO production in the low nM range. Circular dichroism analysis revealed a conformational change from for the parent linear peptides to the cyclic analogs. The most active cyclic analog is completely stable towards trypsin/chymotrypsin degradation while the linear 15-mer analogs completely degraded within 30 min. The outcome of this study is a potent cyclic peptide with drug-like properties that can be used as a template for drug development.     

Synthesis of cyclic tryptathionine peptides

The helicity of the tryptathionine moiety of the phallotoxins has been recognized by comparison with cyclic tryptathionine tripeptides. In order to investigate the influence of the configuration of the component amino acids on the conformation of the cyclic peptides, six analogue thioether tripeptides containing L- and D-alanine and L- and D-cysteine, respectively, have been synthesized. The CD spectra of the peptides are very similar to each other, showing mirror images of the CD of phalloidin and, therefore, negative helicity. The spectra of the D-cysteine containing compounds differ from the L-cysteine containing compounds by their weakly positive ellipticity values around 270 nm. The cyclization reaction of Boc-Hpi-D-Ala-D-Cys(STrt)OCH3, along with the cyclic tripeptide, afforded a cyclic hexapeptide by dimerization. The CD spectrum of the dimer is very similar to that of phalloidin, thus pointing to a positive helicity of its two tryptathionine moieties. The dimeric thioether peptide forms a rather strong complex with Cu2+ ions.     

Synthesis and biological activities of cyclic lactam peptides as substrates for non-receptors PTKs

The heptapeptide EDNEYTA, which reproduces the main autophosphorylation site of Src, has been previously shown to be a good substrate for both Src and Syk tyrosine kinases [Ruzza, P., et al., J. Pept. Sci., 2 (1996) 325]. Four lactam bridge conformationally constrained analogues of this peptide were synthesized by classical solution methods and screened for their suitability as c-Fgr and Syk tyrosine kinase substrates. The kinetic data obtained indicate that the different rings of the lactam peptides influence the capability of the peptides to act as PTK substrates. In general cyclization decreases the peptide phosphorylability, however the sequence containing the greatest lactam ring, ED(EEYTK), resulted in an especially suitable and selective substrate for Syk tyrosine kinase.     

Facile synthesis of orthogonally protected amino acid building blocks for combinatorial N-backbone cyclic peptide chemistry.

Protected Nalpha-(aminoallyloxycarbonyl) and Nalpha-(carboxyallyl) derivatives of all natural amino acids (except proline), and their chiral inverters, were synthesized using facile and efficient methods and were then used in the synthesis of Nalpha-backbone cyclic peptides. Synthetic pathways for the preparation of the amino acid building units included alkylation, reductive amination and Michael addition using alkylhalides, aldehydes and alpha,beta-unsaturated carbonyl compounds, and the corresponding amino acids. The resulting amino acid prounits were then subjected to Fmoc protection affording optically pure amino acid building units. The appropriate synthetic pathway for each amino acid was chosen according to the nature of the side-chain, resulting in fully orthogonal trifunctional building units for the solid-phase peptide synthesis of small cyclic analogs of peptide loops (SCAPELs). Nalpha-amino groups of building units were protected by Fmoc, functional side-chains were protected by t-Bu/Boc/Trt and N-alkylamino or N-alkylcarboxyl were protected by Alloc or Allyl, respectively. This facile method allows easy production of a large variety of amino acid building units in a short time, and is successfully employed in combinatorial chemistry as well as in large-scale solid-phase peptide synthesis. These building units have significant advantage in the synthesis of peptido-related drugs.     

Synthesis and biological activities of cyclic lactam peptides as substrates for non-receptors PTKs

Summary The heptapeptide EDNEYTA, which reproduces the main autophosphorylation site of Src, has been previously shown to be a good substrate for both Scc and Syk tyrosine kinases [Ruzza, P., et al., J. Pept. Sci., 2 (1996) 325]. Four lactam bridge conformationally constrained analogues of this peptide were synthesized by classical solution methods and screened for their suitability as c-Fgr and Syk tyrosine kinase substrates. The kinetic data obtained indicate that the different rings of the lactam peptides influence the capability of the peptides to act as PTK substrates. In general cyclization decreases the peptide phosphorylability, however the sequence containing the greatest lactam ring, ED(EEYTK), resulted in an especially suitable and selective substrate for Syk tyrosine kinase.     

Synthesis of cyclic α-MSH peptides

Summary Cyclic lactam analogs of α-melanocyte stimulating hormone (α-MSH) have been shown to be potent agonists in the frog skin bioassay [Al-Obeidi, F. et al., J. Med. Chem., 32 (1989) 2555], demonstrating melanocortin-1 (MC1) receptor activity. We synthesized cyclic α-MSH(1–13) and α-MSH(4–10) lactam analogs. The peptides were synthesized using Fmoc chemistry. We improved the cyclization procedure: side chains of Asp⁵ and Lys¹⁰ from the deprotected peptide were coupled in DMF to form a cyclic lactam, using an excess of PyBOP reagent and DIEA as a base. The cyclization reaction was completed within 1 h and was almost quantitative. We also synthesized an α-MSH analog cyclized via a disulphide bridge. The peptides were tested for their selectivity for the rat MC4 receptor. Cyclization and substitutions at position 7 dramatically influenced the selectivity for the rMC4 receptor.     

Effects of backbone modification on helical peptides: The reduced carbonyl modification

Reducing a CO to a CH₂ moiety in a peptide bond destroys the ability of the peptide link to act as a proton acceptor in a hydrogen-bonded structure. Here, this modification is introduced into different positions of the helical peptide, acetyl-WGG(RAAAA)₄R-amide, and the melting of these peptides is followed using CD. Effects of this modification on helical peptides are compared to our previous N-methylation studies [C. F. Chang and M.H. Zehfus (1996) Biopolymers, Vol. 40, pp. 609–616]. While the experiments were designed to remove the same hydrogen bond from the peptide, no consistent results are obtained between these two modifications. This result suggests that these modifications not only break the backbone hydrogen bonds, but also involve other destabilizing effects. When our data is analyzed using different helix-coil transition models, the results show that as the models increase in complexity the energy associated with a single residue modification increases. Unfortunately, the most detailed dichroic model, which should best describe this system, works for only one peptide. Apparently, the models need to be further improved to better mimic our system. © 1998 John Wiley & Sons, Inc. Biopoly 46: 181–193, 1998     

Synthesis of biologically active cyclic peptides

1. The extent of racemization and the coupling yield in peptide synthesis were studied under high dilution conditions. The azide method yielded the best results. 2. Five linear penta-peptide precursors related to gramicidin S were subjected to cyclization in order to study how the difference in the sequence influences the yield and the ratio of cyclic dimer to monomer. The azide with the sequence of -L -Pro-L -Val-L -Orn(Z)-L -Leu-D -Phe- afforded diZ-gramicidin S in a high yield of 63%. 3. Alternaria mali toxin III, a cyclotetradepsipeptide phytotoxin, was synthesized. The activated linear tetradepsipeptide containing a D -Dap(Z) (N³-Z-D -2,3-diaminopropionic acid) residue at the N-terminus afforded the cyclic precursor (53%). The Dap residue in the precursor was converted into a ΔAla residue by Hofmann degradation to give the desired product.     

Imidazoline pseudodipeptides as mimics of reverse turn structures.

The synthesis of an imidazoline dipeptide mimetic (a 4,5-dihydroimidazole-4-carboxylic acid) is reported that displays an intramolecular hydrogen-bond consistent with a turn conformation in solution.     

Azobenzene as photoresponsive conformational switch in cyclic peptides.

Over the last decades azobenzene has been the most widely used optical trigger for the synthesis of photoresponsive systems ranging from poly-alpha-amino acids to innovative materials with light-controlled mechanical and optical properties. More recently, its use in form of appropriate derivatives allowed to generate cyclic peptide structures of constraint conformational space and thus to exploit its reversible photoisomerization to induce well defined transitions between different conformational states. These can be characterized in detail in both photostationary states making such systems ideal substrates for ultrafast spectroscopic analysis of conformational transitions. Moreover, the changes in biophysical properties that occur as a consequence of the different conformational states can be exploited for a photo-control of a large variety of molecular recognition processes.     

Stereochemical studies on cyclic peptides. IX. Conformational studies on cyclic tetrapeptides containing alternating cis and trans peptide units

Conformational analyses of cyclic tetrapeptides consisting of alternating cis and trans peptide units have been made using contact criteria and energy calculations. This study has been restricted to those structures having a symmetry element in the backbone ring, such as a twofold axis (d) or a center of inversion (i). There are five main results. (1) There are two distinct types of conformations, which are stereochemically favorable corresponding to each of twofold and inversion-symmetrical structures, designated as d₁, d₂ (for twofold symmetrical) and i₁, i₂ (for inversion-symmetrical). Among these, the i₁ type has the lowest energy when glycyl residues occur at all four α-carbon atoms. (2) With the glycyl residue at all four α-carbon atoms, methyl substitution at the cis peptide nitrogen atoms is possible in all the four types, whereas the substitution at trans peptide nitrogen atoms is possible only for the i₁ type. Thus only in the i₁ type can all the nitrogen atoms be methylated simultaneously. The conformation of the molecule in the crystal structure of cyclotetrasarcosyl belongs to the i₁ type. (3) When alanyl residues occur at all four α-carbon atoms, the possible symmetrical type is dependent on the enantiomorphic form and the actual sequence of the alanyl residues. (4) The methyl substitution at peptide nitrogen atoms for cyclic tetrapeptides having alanyl residues causes more stereochemical restriction in the allowed conformations than with glycyl residues. (5) The prolyl residue can be incorporated favorably at the cis-trans junction of both d and i types of structures. The results of the present study are compared with the data on cyclic tetrapeptides available from the crystal structure and nmr studies. The results show an overall agreement both regarding the type of symmetry and the conformational parameters.     

Synthesis and biological activities of new side chain and backbone cyclic bradykinin analogues.

A series of conformationally constrained cyclic analogues of the peptide hormone bradykinin (BK, Arg-Pro-Pro-Gly-Phe-Ser-Pro-Phe-Arg) was synthesized to check different turned structures proposed for the bioactive conformation of BK agonists and antagonists. Cycles differing in the size and direction of the lactam bridge were performed at the C- and N-terminal sequences of the molecule. Glutamic acid and lysine were introduced into the native BK sequence at different positions for cyclization through their side chains. Backbone cyclic analogues were synthesized by incorporation of N-carboxy alkylated and N-amino alkylated amino acids into the peptide chain. Although the coupling of Fmoc-glycine to the N-alkylated phenylalanine derivatives was effected with DIC/HOAt in SPPS, the dipeptide building units with more bulky amino acids were pre-built in solution. For backbone cyclization at the C-terminus an alternative building unit with an acylated reduced peptide bond was preformed in solution. Both types of building units were handled in the SPPS in the same manner as amino acids. The agonistic and antagonistic activities of the cyclic BK analogues were determined in rat uterus (RUT) and guinea-pig ileum (GPI) assays. Additionally, the potentiation of the BK-induced effects was examined. Among the series of cyclic BK agonists only compound 3 with backbone cyclization between positions 2 and 5 shows a significant agonistic activity on RUT. To study the influence of intramolecular ring closure we used an antagonistic analogue with weak activity, [D-Phe7]-BK. Side chain as well as backbone cyclization in the N-terminus of [D-Phe7]-BK resulted in analogues with moderate antagonistic activity on RUT. Also, compound 18 in which a lactam bridge between positions 6 and 9 was achieved via an acylated reduced peptide bond has moderate antagonistic activity on RUT. These results support the hypothesis of turn structures in both parts of the molecule as a requirement for BK antagonism. Certain active and inactive agonists and antagonists are able to potentiate the bradykinin-induced contraction of guinea-pig ileum.