以葡萄糖为唯一碳源合成聚-4-羟基丁酸的重组大肠杆菌的构建

为实现重组大肠杆菌以葡萄糖为唯一碳源合成均聚的P( 4HB) ,PCR扩增大肠杆菌编码谷氨酸:琥珀酰半缩醛转氨基酶基因(gabT) ,谷氨酸脱羧酶基因(gadA)以及富养罗尔斯通氏菌(Ralstoniaeutropha)H16的4_羟基丁酸脱氢酶基因(gadB) ,并组装到携带富养罗尔斯通氏菌(Ralstoniaeutropha)H16的PHA聚合酶基因(phaC)和克氏梭菌(Clostridiumkluyveri)中编码4_羟基丁酸:CoA转移酶基因(orfZ)的重组质粒pKESS5 3上,形成一个大的操纵元。携带重组质粒的大肠杆菌获得从三羧酸循环的中间物———α_酮戊二酸到P( 4HB)的代谢途径。结果表明,重组大肠杆菌可以以葡萄糖为唯一碳源合成均聚的P( 4HB) ,当向以葡萄糖为唯一碳源的无机培养基添加蛋白胨、酵母提取物、酪蛋白水解物时,P( 4HB)的含量可以高达菌体干重的30 %。     

Production of poly(4-hydroxybutyric acid) by fed-batch cultures of recombinant strains of Escherichia coli

A recombinant strain of Escherichia coli was used to produce poly(4-hydroxybutyric acid), P(4HB), homopolyester by fed-batch culture in M9 mineral salts medium containing glucose and 4-hydroxybutyric acid as carbon sources. The final cell dry weight, P(4HB) concentration and P(4HB) content were 12.6 g/l, 4.4 g/l, and 36% of cell dry weight, respectively, in a 27-l stirred and aerated fermenter after 60 h of fed-batch fermentation at constant pH.     

Production of poly(3-hydroxybutyric acid) by fed-batch culture of Alcaligenes eutrophus with glucose concentration control

Alcaligenes eutrophus NCIMB 11599 was cultivated to produce poly(3-hydroxybutyric acid) (PHB) from glucose by the automatic fed-batch culture technique. The glucose concentration of the culture broth was controlled at 10 to 20 g/L by two methods: using exit gas data obtained from a mass spectrometer and using an on-line glucose analyzer. The effect of ammonium limitation on PHB synthesis at different culture phases was studied. The final cell concentration, PHB concentration, and PHB productivity increased as ammonia feeding was stopped at a higher cell concentration. High concentrations of PHB (121 g/L) and total cells (164 g/L) were obtained in 50 h when ammonia feeding was stopped at the cell concentration of 70 g/L. The maximum PHB content reached 76% of dry cell weight and the productivity was 2.42 g/L h with the yield of 0.3 g PHB/g glucose.     

Cloning of poly(3-hydroxybutyric acid) synthase genes of Rhodobacter sphaeroides and Rhodospirillum rubrum and heterologous expression in Alcaligenes eutrophus

From genomic libraries of the purple non-sulfur bacteria Rhodospirillum rubrum Ha and Rhodobacter sphaeroides ATCC 17023 in the broad-host range cosmid pVK100, we cloned a 15- and a 14-kbp HindIII restriction fragment, respectively. Each of these fragments restored the ability to accumulate poly(3-hydroxybutyrate) (PHB), in the PHB-negative mutant Alcaligenes eutrophus PHB-4. These hybrid cosmids also complemented PHB-negative mutants derived from wild-type R. rubrum or R. sphaeroides. Both fragments hybridized with the PHB synthase structural gene of A. eutrophus H16 and conferred the ability to express PHB synthase activity. Only the 15-kbp HindIII fragment from R. rubrum conferred on the mutant PHB-4 the ability to form large PHB granules (length up to 3.5 microns).     

Crystallization behavior and hydrophobic properties of biodegradable ethyl cellulose-g-poly(3-hydroxybutyrate-co-3-hydroxyvalerate): The influence of the side-chain length and grafting density

The copolymerization of grafting poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) onto ethyl cellulose (EC) was carried out through the homogeneous acylation reaction between EC as a backbone and telechelic OH-terminated PHBV oligomer as side chains in 1,2-dichloroethane by using 1,6-hexamethylene diisocyanate (HDI) as a coupling agent and dibutyltin dilaurate as catalyst. The resulting copolymers were studied by using NMR, FT-IR, WAXD, DSC, and contact angle measurements. It is found that with the increasing of the HDI/PHBV fraction, a transition exhibition occurred on crystallization behavior and hydrophobic properties, which could be modulated through controlling the lengths and grafting densities of PHBV side chains. Compared with those of neat PHBV, the degree of crystallinity for EC-g-PHBV_1.8 decreased from 58.1% to 39.1%, the maximum decomposition temperature increased from 259.6 to 266.3 °C, and the contact angle increased from 60.1° to 95.7°.     

Comparison of recombinant Escherichia coli strains for synthesis and accumulation of poly-(3-hydroxybutyric acid) and morphological changes

A stable high-copy-number plasmid pSYL105 containing the Alcaligenes eutrophus polyhydroxyalkanoic acid (PHA) biosynthesis genes was constructed. This plasmid was transferred to seven Escherichia coli strains (K12, B, W, XL1-Blue, JM109, DH5alpha, and HB101), which were subsequently compared for their ability to synthesize and accumulate ploy- (3-hydroxybutyric acid) (PHB). Growth of recombinant cells and PHB synthesis were investigated in detail in Luria-Bertani (LB) medium containing 20 g/L glucose. Cell growth, the rate of PHB synthesis, the extent of PHB accumulation, the amount of glucose utilized, and the amount of acetate formed varied from one strain to another. XL1-Blue (pSYL105) and B (pSYL105) synthesized PHB at the fastest rate, which was ca. 0.2 g PHB/g true cell mass-h, and produced PHB up to 6-7 g/L. The yields of cell mass, true cell mass, and PHB varied considerably among the strains. The PHB yield of XL1-Blue (pSYL105) in LB plus 20 g/L glucose was as high as 0.369 g PHB/g glucose. Strains W (pSYL105) and K12 (pSYL105) accumulated the least amount of PHB with the lowest PHB yield at the lowest synthesis rate. JM109 (pSYL105) accumulated PHB to the highest extent (85.6%) with relatively low true cell mass (0.77 g/L). Considerable filamentation of cells accumulating PHB was observed for all strains except for K12 and W, which seemed to be due either to the overexpression of the foreign PHA biosynthesis enzymes or to the accumulation of PHB. (c) 1994 John Wiley & Sons, Inc.     

Enhanced production of D-(-)-3-hydroxybutyric acid by recombinant Escherichia coli

Wild-type bacteria including Escherichia coli normally do not produce extracellular D-(-)-3-hydroxybutyric acid (3HB). To produce extracellular chiral 3HB, a new pathway for synthesis of 3HB was constructed by simultaneous expression of genes of beta-ketothiolase (phbA), acetoacetyl-CoA reductase (phbB), phosphor-transbutyrylase (ptb) and butyrate kinase (buk) in E. coli strain DH5alpha. E. coli DH5alpha containing any one of the four plasmids pBHR69, pUCAB, p68CM or pKKAB that harbor the phbA and phbB genes produced small amounts of 3HB, ranging from 75 to 400 mg l(-1), while E. coli DH5alpha harboring p68CMPTK containing genes of phbA, phbB, ptb and buk increased the 3HB concentration to 1.4 g l(-1) in shake flasks supplemented with LB broth and 20 g l(-1) glucose. 3HB production was further improved to over 2 g l(-1) in shake flasks when E. coli DH5alpha hosted two plasmids simultaneously that separately contained phbA and phbB in one plasmid while ptb and buk in the other. A batch fermentation run in a 5-l fermenter produced approximately 5 g l(-1) 3HB after 24 h. A fed-batch process increased 3HB production to 12 g l(-1) after 48 h of fermentation.     

Characteristics and bending performance of electroactive polymer blend made with cellulose and poly(3-hydroxybutyrate)

This paper describes a novel cellulose/poly(3-hydroxybutyrate) blend based electroactive polymer. The fabrication process, bending actuation test and its characteristics are investigated. To prepare this new EAP, cellulose and PHB were dissolved in trifluoroacetic acid. The solution was cast to form a film followed by depositing thin gold electrode on both sides of the film. The characteristics of the cellulose/PHB film were investigated by Fourier transform infrared spectra, scanning electron microscopy, X-ray diffraction differential scanning calorimetry, tensile test and dynamic mechanical analysis. The bending performance was evaluated in terms of free bending displacement, electrical power consumption output and lifetime test under ambient conditions. Primary results show that this cellulose/PHB blend EAP is less sensitive to humidity and it shows higher bending displacement and longer lifetime than pure cellulose EAP at room humidity condition. These results indicate that this new cellulose/PHB blend EAP has potential for many biomimetic applications.     

A facile method for preparing biodegradable chitosan derivatives with low grafting degree of poly(lactic acid)

Chemical modification of chitosan by grafting with PLA (CS-g-PLA) was developed via 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) mediated coupling reaction. The introduction of PLA disrupted the crystalline structure of chitosan, improved its solubility and thermal stability. Low degree of PLA substitution showed better degradation efficiency than chitosan and PLA. Weight loss of CS-g-PLA6 and CS-g-PLA4 was 87% and 94%, respectively, in 7 days enzymatic degradation study. CS-g-PLA2 was totally degraded in 1 day. Self-assembly behavior was studied using pyrene fluorescence dye technique and found to be PLA grafting level dependent. CS-g-PLA with low grafting degree showed hydrophilic, self-assembling properties and controllable biodegradability that may widen its applications.     

UV mutagenesis of Cupriavidus necator for extracellular production of (R)-3-hydroxybutyric acid

Aim:  Ultraviolet (UV) mutagenesis was carried out to obtain mutant strains of Cupriavidus necator that could produce ( R )-3-hydroxybutyric acid [( R )-3-HB] in the culture supernatant.
Methods and Results:  C. necator (formerly known as Ralstonia eutropha ) was subjected to UV radiation to generate mutants that are capable of producing ( R )-3-HB in the culture supernatant. Results indicated that UV mutagen disrupted the phbB ( phbB knock-out) and thus, promoted production of ( R )-3-HB in mutant strains. Inclusion of acetoacetate esters (carbonyl compounds) in the culture broth led to increased production of ( R )-3-HB. Thus, acetoacetyl-CoA (an intermediate of the PHB synthetic pathway) might have been converted to acetoacetate, which in the presence of ( R )-3-HB dehydrogenase and NADPH/NADP⁺, resulted in extracellular production of ( R )-3-HB.
Conclusions:  UV mutagenesis proved to be a satisfactory method in generating interesting mutants for extracellular production of ( R )-3-HB. Extracellular production of ( R )-3-HB upon addition of acetoacetate esters would suggest a likely ( R )-3-HB biosynthetic pathway in C. necator .
Significance and Impact of the Study:  Mutants obtained in this study are very useful for production of ( R )-3-HB. For the first time, the production of ( R )-3-HB by C. necator via acetoacetate is reported.     

Electrospinning of poly(vinyl alcohol)-water-soluble quaternized chitosan derivative blend

Defect free mats containing a cationic polysaccharide, chitosan derivative such as N-[(2-hydroxy-3-trimethylammonium)propyl] chitosan chloride (HTCC), have been prepared using electrospinning of an aqueous solution of poly(vinyl alcohol) (PVA)-HTCC blends. HTCC, a water-soluble derivative of chitosan, was synthesized via the reaction between glycidyl-trimethylammonium chloride and chitosan. Solutions of PVA-HTCC Blends were electrospun. The morphology, diameter and structure of the produced electrospun nanofibres were examined by scanning electron microscopy (SEM). The average fibre diameter was in the range of 200-600 nm. SEM images showed that the morphology and diameter of the nanofibres were mainly affected by weight ratio of the blend and applied voltage. The results revealed that increasing HTCC content in the blends decreases the average fibre diameter. These observations were discussed on the basis of shear viscosities and conductivities of the spinning solutions. Microbiological assessment showed that the PVA-HTCC mats have a good antibacterial activity against Gram-positive bacteria, Staphylococcus aureus, and Gram-negative bacteria, Escherichia coli.     

Serological and structural features of Hafnia alvei lipopolysaccharides containing d-3-hydroxybutyric acid

Abstract The serological heterogeneity of Hafnia alvei lipopolysaccharides from strains ATCC 13337, 1187, 1221, 114/60, 1211 and 1216, that contain d -3-hydroxybutyric acid, was analyzed by rocket immunoelectrophoresis, immunoblotting and passive hemagglutination. The significance of d -3-hydroxybutyric acid component for their cross-reactivity has been discussed. The results obtained allowed us to place four H. alvei strains (ATCC 13337, 1187, 1221 and 114/60) in one serotype (A) and to consider two other strains (1211 and 1216) as separate serotypes (B and C, respectively).     

Rheological characterisation of a novel thermosensitive chitosan/poly(vinyl alcohol) blend hydrogel

Thermosensitive hydrogels that are triggered by changes in environmental temperature thus resulting in in situ hydrogel formation have recently attracted the attention of many investigators for biomedical applications. In the current work, the thermosensitive hydrogel was prepared through the mixture of chitosan (CS), poly(vinyl alcohol) (PVA) and sodium bicarbonate. The mixture was liquid aqueous solutions at low temperature (about 4 °C), but a gel under physiological conditions. The hydrogel was characterized by FTIR, swelling and rheological analysis. The effect of hydrogel composition and temperature on both the gel process and the gel strength was investigated from which possible hydrogel formation mechanisms were inferred. In addition, the hydrogel interior morphology as well as porosity of structure was evaluated by scanning electron microscopy (SEM). The potential of the hydrogels as vehicles for delivering bovine serum albumin (BSA) were also examined. In this study, the physically crosslinked chitosan/PVA gel was prepared under mild conditions without organic solvent, high temperature or harsh pH. The viscoelastic properties, as investigated rheologically, indicate that the gel had good mechanical strength. The gel formed implants in situ in response to temperature change, from low temperature (about 4 °C) to body temperature, which was very suitable for local and sustained delivery of proteins, cell encapsulation and tissue engineering.     

Immobilization of invertase onto poly(3-methylthienyl methacrylate)/poly(3-thiopheneacetic acid) matrix

A novel immobilization matrix, poly(3-methylthienyl methacrylate)–poly(3-thiopheneacetic acid) (PMTM–PTAA), was synthesized and used for the covalent immobilization of Saccharomyces cerevisiae invertase to produce invert sugar. The immobilization resulted in 87% immobilization efficiency. Optimum conditions for activity were not affected by immobilization and the optimum pH and temperature for both free and immobilized enzyme were found to be 4.5 and 55 °C, respectively. However, immobilized invertase was more stable at high pH and temperatures. The kinetic parameters for free and immobilized invertase were also determined using the Lineweaver–Burk plot. The K_m values were 35 and 38 mM for free and immobilized enzyme, respectively. The V_max values were 29 and 24 mg glucose/mg enzyme min for free and immobilized enzyme, respectively. Immobilized enzyme could be used for the production of glucose and fructose from sucrose since it retained almost all the initial activity for a month in storage and retained the whole activity in repeated 50 batch reactions.     

Preparation and hydrolytic degradation of semi-interpenetrating networks of poly(3-hydroxyundecenoate) and poly(lactide-co-glycolide)

Semi-interpenetrating networks (semi-IPNs), where poly(lactide-co-glycolide) (PLGA) molecules were entrapped in the crosslinked matrices of poly(3-hydroxyundecenoate) (PHU), were prepared by irradiating homogeneous solutions of PHU and PLGA in chloroform with UV light. Attenuated total reflectance infrared spectroscopy showed that the PLGA chains were entrapped in PHU networks. The semi-IPNs showed enhanced mechanical strength as the PLGA content increased. The semi-IPNs were incubated at 37 °C in a 0.01N NaOH solution, and the extent of hydrolytic degradation was investigated by monitoring changes in various parameters such as water uptake, pH, mass, and morphology. Hydrolysis of semi-IPNs were significantly affected by the presence of PLGA. A semi-IPN prepared from a 9:1 (by weight) mixture of PHU and PLGA lost 25% of its original weight in 12 weeks while a PHU sample containing no PLGA lost only 5% of its weight during the same period under identical conditions. The hydrolysis was most likely accelerated when the pH of the medium was lowered by the hydrolyzed products of PLGA, 2-hydroxyalkanoic acids. These results showed that hydrolysis of PHA could be enhanced by incorporating a second component that lowered the pH of the hydrolysis system.     

Quaternized chitosan (QCS)/poly (aspartic acid) nanoparticles as a protein drug-delivery system

The aim of this study was to generate a new type of nanoparticles made of quaternized chitosan (QCS) and poly (aspartic acid) and to evaluate their potential for the association and delivery of protein drugs. QCS and poly (aspartic acid) were processed to nanoparticles via the ionotropic gelation technique. The size, polydispersity, zeta potential, and morphology of the nanoparticles were characterized. Entrapment studies of the nanoparticles were conducted using bovine serum albumin (BSA) as a model protein. The effects of the pH value of nanoparticles with different QCS/poly (aspartic acid) ratios, QCS molecular weight (MW), poly (aspartic acid) concentration, and BSA concentration on the nanoparticle size, the nanoparticle yield, and BSA encapsulation were studied in detail. Suitably pH value of nanoparticles with different QCS/poly (aspartic acid) ratios, moderate QCS MW, optimal concentration ratio of poly (aspartic acid), and QCS favored more nanoparticles formed and higher BSA encapsulation efficiency. The release of BSA from nanoparticles was pH-dependent. Fast release occurred in 0.1 M phosphate buffer solution (PBS, pH 7.4), while the release was slow in 0.1 M HCl (pH 1.2). The results showed that the new QCS/poly (aspartic acid) nanoparticles have a promising potential in protein delivery system.     

The swelling behavior and network parameters of guar gum/poly(acrylic acid) semi-interpenetrating polymer network hydrogels

Guar gum/poly(acrylic acid) semi-interpenetrating polymer network (IPN) hydrogels have been prepared via free radical polymerization in the presence of a crosslinker of N,N′-methylene bisacrylamide (MBA). The kinetics of swelling and the water transport mechanism were studied as a function of the composition of the hydrogels and the pH of the swelling medium. Hydrogels showed enormous swelling in aqueous medium and displayed swelling characteristics, which were highly dependent on the chemical composition of the hydrogels and pH of the medium in which hydrogels were immersed (ionic strength I = 0.15 mol/L). The semi-INP hydrogels were characterized by evaluating various network parameters such as average molecular weight between crosslinks (M_c) crosslink density (ρ) and mesh size ξ.     

Production of (R)-3-hydroxybutyric acid by fermentation and bioconversion processes with Azohydromonas lata

Feasibility of producing (R)-3-hydroxybutyric acid ((R)-3-HB) using wild type Azohydromonas lata and its mutants (derived by UV mutation) was investigated. A. lata mutant (M5) produced 780 mg/l in the culture broth when sucrose was used as the carbon source. M5 was further studied in terms of its specificity with various bioconversion substrates for production of (R)-3-HB. (R)-3-HB concentration produced in the culture broth by M5 mutant was 2.7-fold higher than that of the wild type strain when sucrose (3% w/v) and (R,S)-1,3-butanediol (3% v/v) were used as carbon source and bioconversion substrate, respectively. Bioconversion of resting cells (M5) with glucose (1% v/w), ethylacetoacetate (2% v/v), and (R,S)-1,3-butanediol (3% v/v), resulted in (R)-3-HB concentrations of 6.5 g/l, 7.3 g/l and 8.7 g/l, respectively.     

Formation of poly(3-hydroxyalkanoates) by phototrophic and chemolithotrophic bacteria

The formation of poly(3-hydroxyalkanoic acid), PHA, by various strains of chemolithotrophic and phototrophic bacteria has been examined. Chemolithotrophic bacteria were grown aerobically under nitrogen-limiting conditions on various aliphatic organic acids. Phototrophic bacteria were grown anaerobically in the light on a nitrogen-rich medium and were subsequently transferred to a nitrogen-free medium containing acetate, propionate, valerate, heptanoate or octanoate as carbon source. All 41 strains investigated in this study were able to synthesize and accumulate PHA. All 11 strains of chemolithotrophic bacteria and all 15 strains belonging to the non-sulfur purple bacteria synthesized a polymer, which contained 3-hydroxy-valerate (3HV) beside 3-hydroxybutyrate (3HB), if the cells were cultivated in the presence of propionate, valerate or heptanoate. Many non-sulfur purple bacteria synthesized copolyesters of 3HB and 3HV even with acetate as carbon source. In contrast, most sulfur purple bacteria did not incorporate 3HV at all. Among 15 strains tested, only Chromatium vinosum strain 1611, C. purpuratum strain BN5500 and Lamprocystis roseopersicina strain 3112 were able to synthesize polyesters containing 3HV with propionate, valerate or heptanoate as carbon source.