Enantioseparation of ofloxacin and its four related substances with ligand exchange–micellar electrokinetic chromatography using copper(II)‐L‐isoleucine complex as chiral selector

A ligand‐exchange micellar electrokinetic capillary electrophoresis system with copper(II)‐L‐isoleucine complexes as the chiral selector incorporated in micelles of sodium dodecyl sulfate (SDS) was developed for the enantioseparation of ofloxacin and its four related substances (impurities A, C, E, and F). The effects of important parameters affecting separation such as buffer pH, SDS concentration, chiral selector concentration, and organic additive were investigated in detail. Under optimum experimental conditions, enantioseparation of ofloxacin, impurities A, C, E, and F enantiomers was accomplished with resolutions of 4.28, 2.83, 3.40, 3.58, and 2.46, respectively. Further, simultaneous separation of impurities A, C, E, and F enantiomers was achieved using 10 mmol/L NH₄OAc as the running buffer containing 4 mmol/L copper sulfate,20 mmol/L L‐isoleucine, 20 mmol/L SDS, and 5% methanol at pH 8.5. To the best of our knowledge, the simultaneous enantioseparation of four impurities of ofloxacin has not been reported previously.     

Enantioseparation of nine indanone and tetralone derivatives by HPLC using carboxymethyl‐β‐cyclodextrin as the mobile phase additive

High‐performance liquid chromatography (HPLC) is a powerful method in the area of chiral separation. In this study, a method of HPLC using carboxymethyl‐β‐cyclodextrin (CM‐β‐CD) as chiral selector was developed for enantioseparation of nine indanone and tetralone derivatives. The separation was performed on a conventional C₁₈ column. The optimal mobile phase was a mixture of methanol and 0.05 mol/L phosphate buffer at pH 1.8 (55:45, v /v) containing 22.9 mmol/L CM‐β‐CD. Under such conditions, the resolutions of all analytes were over 1.8 except for Compound F. The results of the study indicate the presence of a complex with 1:1 stoichiometry of the inclusion complex. In addition, it can be inferred from thermodynamic analysis that the behavior of formation of the inclusion complex and enantioseparation occurred simultaneously, while they were driven by different forces. The effect of analyte structure is also discussed.     

Optimum operational conditions for chiral separation of tryptophan enatiomers using ligand exchange liquid chromatography

A simple and precise method for chiral separation of tryptophan enantiomers using high performance liquid chromatography with aligand exchange mobile phase was developed. Chiral separation was performed on a conventional C₁₈ column, using a mobile phase that consisted of a water-methanol solution (88∶12, v/v) containing 10 mmol/Ll-leucine and 5 mmol/L copper sulfate as a chiral ligand additive at a flow rate of 1.0 mL/min. This method allowed baseline separation of two enantiomers with a resolution of 1.84 in less than 30 min. The effect of various conditions, including concentration, type of ligand, organic modifier, pH, flow rate, and temperature, on enantioseparation were evaluated and chiral recognition mechanisms were investigated. Thermodynamic data (ΔΔH and ΔΔS) obtained by van't Hoff plots revealed that enantioseparation is an enthalpy-controlled process.     

Separation of Tryptophan Enantiomers by Ligand‐Exchange Chromatography With Novel Chiral Ionic Liquids Ligand

Chiral ionic liquids (CILs) with amino acids as cations have been applied as novel chiral ligands coordinated with Cu²⁺ to separate tryptophan enantiomers in ligand exchange chromatography. Four kinds of amino acid ionic liquids, including [L‐Pro][CF₃COO], [L‐Pro][NO₃], [L‐Pro]₂[SO₄], and [L‐Phe][CF₃COO] were successfully synthesized and used for separation of tryptophan enantiomers. To optimize the separation conditions, [L‐Pro][CF₃COO] was selected as the model ligand. Some factors influencing the efficiency of chiral separation, such as copper ion concentration, CILs concentration, methanol ratio (methanol/H₂O, v/v), and pH, were investigated. The obtained optimal separation conditions were as follows: 8.0 mmol/L Cu(OAc)₂, 4.0 mmol/L [L‐Pro][CF₃COO] ,and 20% (v/v) methanol at pH 3.6. Under the optimum conditions, acceptable enantioseparation of tryptophan enantiomers could be observed with a resolution of 1.89. The results demonstrate the good applicability of CILs with amino acids as cations for chiral separation. Furthermore, a comparative study was also conducted for exploring the mechanism of the CILs as new ligands in ligand exchange chromatography. Chirality 26:160–165, 2014. © 2014 Wiley Periodicals, Inc.     

A 3D Homochiral MOF [Cd2(d‐cam)3]•2Hdma•4dma for HPLC Chromatographic Enantioseparation

Up to now, some chiral metal‐organic frameworks (MOFs) have been reported for enantioseparation in liquid chromatography. Here we report a homochiral MOF, [Cd2(d‐cam)3]·2Hdma·4dma, used as a new chiral stationary phase for high‐performance liquid chromatographic enantioseparation. Nine racemates of alcohol, naphthol, ketone, and base compounds were used as analytes for evaluating the separation properties of the chiral MOF packed column. Moreover, some effects such as mobile phase composition, column temperature, and analytes mass for separations on this chiral column also were investigated. The relative standard deviations for the resolution values of run‐to‐run and column‐to‐column were less than 2.1% and 3.2%, respectively. The experimental results indicate that the homochiral MOF offered good recognition ability, which promotes the application of chiral MOFs use as stationary phase for enantioseparation. Chirality 28:340–346, 2016. © 2016 Wiley Periodicals, Inc.     

Comparative HPLC Enantioseparation of Thirty‐Six Aromatic Compounds on Four Columns of the Lux® Series: Impact of Substituents,Shapes and Electronic Properties

With the aim to define a combined computational/chromatographic empirical approach useful for the high‐performance liquid chromatography (HPLC) method development of new chiral compounds, 36 racemic aromatic compounds with different chemical structures were used as test probes on four polysaccharide‐based chiral stationary phases (CSPs) of the Lux series, namely Lux Cellulose‐1, Lux Cellulose‐2, Lux Cellulose‐4, and Lux Amylose‐2, using classical n‐hexane/2‐propanol mixtures as mobile phase. Electrostatic potential surfaces (EPSs) determined using Density Functional Theory (DFT) calculations were used to derive size, shape, and electronic properties of each analyte. Then a comparative HPLC screening was carried out in order to evaluate the impact of substituents, shapes, and electronic properties of the analytes on the chromatographic behavior as the column changes. The four CSPs showed good complementary recognition ability. The elution sequence was determined in 30 cases out of 36. The success rate to afford baseline separations (R_s ≥ 1.5) was estimated: 29 compounds out of 36 showed baseline enantioseparation on at least one of the four selected CSPs. The combined computational‐chromatographic screening furnished useful collective structure‐chromatographic behavior relationships and a map of the chiral discrimination abilities of the considered CSPs towards the analytes. On this basis, the chromatographic behavior of new analytes on a set of polysaccharide‐based CSPs can be mapped through the qualitative correlation of chromatographic parameters (k, α, R_s) to computed molecular properties of the analytes. Chirality 25:709–718, 2013. © 2013 Wiley Periodicals, Inc.     

Development of a Validated LC Method for Separation of Process‐Related Impurities Including the R‐enantiomer of S‐Pramipexole on Polysaccharide Chiral Stationary Phases

Despite the availability of a few methods for individual separation of S‐pramipexole from its process‐related impurities, no common liquid chromatography (LC) method is reported so far in the literature. The present article describes the development of a single‐run LC method for simultaneous determination of S‐pramipexole and its enantiomeric and process‐related impurities on a Chiralpak AD‐H (150 x 4.6 mm, 5μm) column using n‐hexane/ethanol/n‐butylamine (75:25:0.1 v/v/v) as a mobile phase in an isocratic mode of elution at a flow rate of 1.2 ml/min at 30°C. The chromatographic eluents were monitored at a wavelength of 260 nm using a photodiode array detector. Excellent enantioseparation with good resolutions (Rs ≥ 2.88) and peak shapes (A_s ≤ 1.21) for all analytes was achieved. The proposed method was validated according to International Conference Harmonization (ICH) guidelines in terms of accuracy, precision, sensitivity, and linearity. Limits of quantification of impurities (0.25–0.55 μg/ml) indicate the highest sensitivity achievable by the proposed method. The method has an advantage of selectivity and suitability for routine determination of not only chiral impurity but also all possible related substances in active pharmaceutical ingredients of S‐pramipexole. Chirality 27:430–435, 2015. © 2015 Wiley Periodicals, Inc.     

Enantioseparation of chiral pharmaceuticals by vancomycin‐bonded stationary phase and analysis of chiral recognition mechanism

The drug chirality is attracting increasing attention because of different biological activities, metabolic pathways, and toxicities of chiral enantiomers. The chiral separation has been a great challenge. Optimized high‐performance liquid chromatography (HPLC) methods based on vancomycin chiral stationary phase (CSP) were developed for the enantioseparation of propranolol, atenolol, metoprolol, venlafaxine, fluoxetine, and amlodipine. The retention and enantioseparation properties of these analytes were investigated in the variety of mobile phase additives, flow rate, and column temperature. As a result, the optimal chromatographic condition was achieved using methanol as a main mobile phase with triethylamine (TEA) and glacial acetic acid (HOAc) added as modifiers in a volume ratio of 0.01% at a flow rate of 0.3 mL/minute and at a column temperature of 5°C. The thermodynamic parameters (eg, ΔH, ΔΔH, and ΔΔS) from linear van 't Hoff plots revealed that the retention of investigated pharmaceuticals on vancomycin CSP was an exothermic process. The nonlinear behavior of lnk′ against 1/T for propranolol, atenolol, and metoprolol suggested the presence of multiple binding mechanisms for these analytes on CSP with variation of temperature. The simulated interaction processes between vancomycin and pharmaceutical enantiomers using molecular docking technique and binding energy calculations indicated that the calculated magnitudes of steady combination energy (ΔG) coincided with experimental elution order for most of these enantiomers.     

Electrochromatographic enantioseparation of amino acids using polybutylmethacrylate-based chiral monolithic column by capillary electrochromatography

This article describes the development of a polybutylmethacrylate‐based monolithic capillary column as a chiral stationary phase. The chiral monolithic column was prepared by polymerization of butyl methacrylate (BMA), ethylene dimethacrylate (EDMA), and N‐methacryloyl‐l ‐glutamic acid (MAGA) in the presence of porogens. The porogen mixture included N,N‐dimethyl formamide and phosphate buffer. MAGA was used as a chiral selector. The effect of MAGA content was investigated on electrochromatographic enantioseparation of d,l ‐histidine, d,l ‐tyrosine, d,l ‐phenyl alanine, and d,l ‐glutamic acid. The effect of acetonitrile (ACN) content in mobile phase on electro‐osmotic flow was also investigated. It was demonstrated that the poly(BMA‐EDMA‐MAGA) monolithic chiral column can be used for the electrochromatographic enantioseparation of amino acids by capillary electrochromatography (CEC). The mobile phase was ACN/10 mM phosphate buffer (45:55%) adjusted to pH 2.7. It was observed that l ‐enantiomers of the amino acids migrated before d ‐enantiomers. The separation mechanism of electrochromatographic enantioseparation of amino acids in CEC is discussed. Chirality 24:606–609, 2012. © 2012 Wiley Periodicals, Inc.     

Substituent effects on chiral resolutions of derivatized 1‐phenylalkylamines by heptakis(2,3‐di‐O‐methyl‐6‐O‐tert‐butyldimethylsilyl)‐β‐cyclodextrin GC stationary phase

Chiral resolutions of trifluoroacetyl‐derivatized 1‐phenylalkylamines with different type and position of substituent were investigated by capillary gas chromatography by using heptakis(2,3‐di‐O‐methyl‐6‐O‐tert‐butyldimethylsilyl)‐β‐cyclodextrin diluted in OV‐1701 as a chiral stationary phase. The influence of column temperature on retention and enantioselectivity was examined. All enantiomers of meta‐substituted analytes as well as fluoro‐substituted analytes could be resolved. Temperature had a favorable influence on enantioselectivity for small amines with substituents at the ortho‐position. The type of substituent at the stereogenic center of amines also had a crucial effect as the ethyl group led to poor enantioseparation. Among all analytes studied, trifluoroacetyl‐derivatized 1‐(2′‐fluorophenyl)ethylamine exhibited baseline resolution with the shortest analysis time.     

Investigation of maltodextrin‐based synergistic system with amino acid chiral ionic liquid as additive for enantioseparation in capillary electrophoresis

The combined use of chiral ionic liquids (ILs) and chiral selectors in capillary electrophoresis (CE) to establish a synergistic system has proven to be an effective approach for enantioseparation. In this article, tetramethylammonium‐L‐arginine, a kind of amino acid chiral IL, was applied to investigate its potential synergistic effect with maltodextrin in CE enantioseparation. The established maltodextrin‐based synergistic system showed markedly improved enantioseparations compared with the single maltodextrin system. Parameters such as the chiral IL concentration, maltodextrin concentration, buffer pH, applied voltage, and capillary temperature were optimized. Satisfactory enantioseparation of the five studied drugs, including nefopam, duloxetine, ketoconazole, cetirizine, and citalopram was achieved in 50 mM Tris‐H₃PO₄ buffer solution (pH 3.0) containing 7.0% (m/v) maltodextrin and 60 mM tetramethylammonium‐L‐arginine. In addition, the chiral configuration of tetramethylammonium‐L‐arginine was also investigated to demonstrate the existence of a synergistic effect between chiral ILs and maltodextrin.     

A validated enantiospecific method for determination and purity assay of clopridogrel

A new and accurate HPLC method using β‐cyclodextrin chemically bonded to spherical silica particles as chiral stationary phase (CSP) was developed and validated for determination of S‐clopidogrel and its impurities R‐enantiomer and S‐acid as a hydrolytic product. The effects of acetonitrile and methanol content in the mobile phase and temperature on the resolution and retention of enantiomers were investigated. A satisfactory resolution of S‐clopidogrel active form and its impurities was achieved on ChiraDex® column (5 μm, 4 × 250 mm) at a flow rate of 1.0 ml/min and 17°C using acetonitrile, methanol and 0.01 M potassium dihydrogen phosphate solution (15:5:80 v/v/v) as mobile phase. The detection wavelength was set at 220 nm. The method was validated in terms of accuracy, precision, linearity, and robustness. The limit of detection for R‐enantiomer and S‐acid were 0.75 and 0.09 μg/ml, respectively, injection volume being 20 μl. Finally, the molecular modeling of the inclusion complexes between the analytes and β‐cyclodextrin was performed to investigate the mechanism of the enantiorecognition and to study the quantitative structure–retention relationships. Chirality, 2009. © 2008 Wiley‐Liss, Inc.     

Enantioselective Photolysis and Quantitative Chiral Analysis of Tryptophan Complexed With Alkali‐Metalized L‐Serine in the Gas Phase

The enantioselective photolysis of a cold gas‐phase noncovalent complex of tryptophan with alkali‐metalized L‐serine, M⁺(L‐Ser)(Trp) (M = Na and Li), was examined using a tandem mass spectrometer containing a variable‐temperature ion trap. CO₂ loss from Trp in the clusters was enantiomerically selective in ultraviolet excitation with linearly polarized light. M⁺(L‐Ser) promoted the enantioselective photolysis of Trp as a chiral auxiliary. The enantioselective photolysis of the D‐enantiomer was applied to a quantitative chiral analysis, in which the optical purity of tryptophan could be determined by measuring the relative abundance ratio R of the enantioselective CO₂ loss to the chiral‐independent evaporation of L‐Ser in a single photodissociation mass spectrum of M⁺(L‐Ser)(Trp). Chirality 27:349–352, 2015. © 2015 Wiley Periodicals, Inc.     

Enantioseparation of chiral perfluorooctane sulfonate (PFOS) by supercritical fluid chromatography (SFC): Effects of the chromatographic conditions and separation mechanism

Perfluorooctane sulfonate (PFOS) is one of the most frequently detected perfluoroalkyl substances in environmental and human samples. Previous studies have shown that nonracemic PFOS in biological samples can be used as a marker of PFOS exposure sources. In recent years, supercritical fluid chromatography (SFC) has emerged as a powerful method to separate chiral compounds. In this study, a method of perfluoro‐1‐methylheptane sulfonate (1 m‐PFOS) enantioseparation by SFC was established. The optimal separation was obtained using a Chiralpak QN‐AX column with CO₂/2‐propanol (70/30, v/v) as the mobile phase with a flow rate of 1 mL/min, column temperature was 32°C, and BPR pressure was 1800 psi. The resolution (Rs) and retention time were 0.88 and 130 minutes, respectively. This method is more economic and greener than HPLC. Modifier pH and column temperature were determined to be significant factors of SFC chiral separation. Modifier pH is negatively correlated with the retention factors and Rs. Adsorption thermodynamics were used to explain the influence of temperature change, and it was concluded that the transfer of two enantiomers from the mobile phase to the stationary phase is enthalpy‐driven. Enantioseparation of 1 m‐PFOS by SFC follows the same rules of ion exchange as those for the chiral separation by HPLC.     

Chiral Discrimination by Ionic Liquids: Impact of Ionic Solutes

Chiral ionic liquids hold promise in many asymmetric applications. This study explores the impact of ionic solutes on the chiral discrimination of five amino acid methyl ester‐based ionic liquids, including L‐ and D‐alanine methyl ester, L‐proline methyl ester, L‐leucine methyl ester, and L‐valine methyl ester cations combined with bis(trifluoromethanesulfonimide) anion. Circularly polarized luminescence spectroscopy was used to study the chiral discrimination by measuring the racemization equilibrium of a dissymmetric europium complex, Eu(dpa)₃^3? (where dpa = 2,6‐pyridinedicarboxylate). The chiral discrimination measured was dependent on the concentration of Eu(dpa)₃^3? and this concentration‐dependence was different in each of the ionic liquids. Ionic liquids with L‐leucine methyl ester and L‐valine methyl ester even switched enantiomeric preference based on the solute concentration. Changing the cation of the Eu(dpa)₃^3? salt from tetrabutylammonium to tetramethylammonium ion also affected the chiral discrimination demonstrated by the ionic liquids. Chirality 27:320–325, 2015. © 2015 Wiley Periodicals, Inc.     

Enantioseparation of Racemic Flurbiprofen by Aqueous Two‐Phase Extraction With Binary Chiral Selectors of L‐dioctyl Tartrate and L‐tryptophan

A novel method for chiral separation of flurbiprofen enantiomers was developed using aqueous two‐phase extraction (ATPE) coupled with biphasic recognition chiral extraction (BRCE). An aqueous two‐phase system (ATPS) was used as an extracting solvent which was composed of ethanol (35.0% w/w) and ammonium sulfate (18.0% w/w). The chiral selectors in ATPS for BRCE consideration were L‐dioctyl tartrate and L‐tryptophan, which were screened from amino acids, β‐cyclodextrin derivatives, and L‐tartrate esters. Factors such as the amounts of L‐dioctyl tartrate and L‐tryptophan, pH, flurbiprofen concentration, and the operation temperature were investigated in terms of chiral separation of flurbiprofen enantiomers. The optimum conditions were as follows: L‐dioctyl tartrate, 80 mg; L‐tryptophan, 40 mg; pH, 4.0; flurbiprofen concentration, 0.10 mmol/L; and temperature, 25 °C. The maximum separation factor α for flurbiprofen enantiomers could reach 2.34. The mechanism of chiral separation of flurbiprofen enantiomers is discussed and studied. The results showed that synergistic extraction has been established by L‐dioctyl tartrate and L‐tryptophan, which enantioselectively recognized R‐ and S‐enantiomers in top and bottom phases, respectively. Compared to conventional liquid–liquid extraction, ATPE coupled with BRCE possessed higher separation efficiency and enantioselectivity without the use of any other organic solvents. The proposed method is a potential and powerful alternative to conventional extraction for separation of various enantiomers. Chirality 27:650–657, 2015. © 2015 Wiley Periodicals, Inc.     

Enantioselective potential of polysaccharide‐based chiral stationary phases in supercritical fluid chromatography

The enantioselective potential of two polysaccharide‐based chiral stationary phases for analysis of chiral structurally diverse biologically active compounds was evaluated in supercritical fluid chromatography using a set of 52 analytes. The chiral selectors immobilized on 2.5 μm silica particles were tris‐(3,5‐dimethylphenylcarmabate) derivatives of cellulose or amylose. The influence of the polysaccharide backbone, different organic modifiers, and different mobile phase additives on retention and enantioseparation was monitored. Conditions for fast baseline enantioseparation were found for the majority of the compounds. The success rate of baseline and partial enantioseparation with cellulose‐based chiral stationary phase was 51.9% and 15.4%, respectively. Using amylose‐based chiral stationary phase we obtained 76.9% of baseline enantioseparations and 9.6% of partial enantioseparations of the tested compounds. The best results on cellulose‐based chiral stationary phase were achieved particularly with propane‐2‐ol and a mixture of isopropylamine and trifluoroacetic acid as organic modifier and additive to CO₂, respectively. Methanol and basic additive isopropylamine were preferred on amylose‐based chiral stationary phase. The complementary enantioselectivity of the cellulose‐ and amylose‐based chiral stationary phases allows separation of the majority of the tested structurally different compounds. Separation systems were found to be directly applicable for analyses of biologically active compounds of interest.     

Investigation of the Enantioselectivity of Tetramethylammonium L‐hydroxyproline Ionic Liquid as a Novel Chiral Ligand in Ligand‐Exchange CE and Ligand‐Exchange MEKC

Chiral ionic liquids (ILs) have drawn more and more attention in separation science; however, only a few papers focused on the application of chiral ILs as chiral ligands in LE‐CE. In this article, a novel amino acid ionic liquid (AAIL), tetramethylammonium L‐hydroxyproline ([TMA][L‐OH‐Pro]), was first applied as a chiral ligand to evaluate its enantioselectivity towards several aromatic amino acids in ligand‐exchange capillary electrophoresis (LE‐CE) and ligand‐exchange micellar electrokinetic capillary chromatography (LE‐MEKC). In the LE‐CE system, excellent separations were achieved for tryptophan (Rs = 3.03) and 3, 4‐dihydroxyphenylalanine (DOPA) (Rs = 4.35). Several parameters affecting the enantioseparation were systematically investigated, including AAIL concentration, type and concentration of central metal ion, buffer pH, as well as applied voltage. The optimum separation was obtained with 60 mM AAIL containing 30 mM Cu (II) at pH 4.5. Additionally, an LE‐MEKC system was established to further study the enantioselectivity of [TMA][L‐OH‐Pro] towards selected analytes. As observed, the separations of the enantiomers of tryptophan, phenylalanine, and histidine were all improved compared to the LE‐CE system. The results indicated that the application of AAILs as chiral ligands is a promising method in chiral separation science. Chirality 27:58–63, 2015. © 2014 Wiley Periodicals, Inc.     

Intrinsic Enantioselectivity of Natural Polynucleotides Modulated by Copper Ions

Natural polynucleotides including Micrococcus lysodeikticus and calf thymus DNA exhibit enantioselective recognition to S‐ofloxacin regulated by Cu²⁺. This is the first report that ofloxacin and Cu²⁺ have cooperative effects on the local distortions of polynucleotides. At the [Cu²⁺]/[base] ratio of 0.1, S‐ofloxacin is more liable to induce the locally distorted structures of polynucleotides, of which the association constant of S‐ofloxacin toward DNA‐Cu(II) is three times higher than that of the R‐enantiomer. The apparent increase of adsorption capability and cooperativity, as well as the change of adsorption mechanism were detected in the adsorption of ofloxacin enantiomers on polynucleotides upon Cu(II)‐coordination. This study not only discloses the effect of the chiral drug on the structural transition of long double‐stranded DNA, but provides fundamental data to develop a novel enantioseparation method based on natural polynucleotides. Chirality 27:306‐313, 2015. © 2015 Wiley Periodicals, Inc.     

Enantioseparation and determination of flumequine enantiomers in multiple food matrices with chiral liquid chromatography coupled with tandem mass spectrometry

The present work firstly described the enantioseparation and determination of flumequine enantiomers in milk, yogurt, chicken, beef, egg, and honey samples by chiral liquid chromatography‐tandem mass spectrometry. The enantioseparation was performed under reversed‐phase conditions on a Chiralpak IC column at 20°C. The effects of chiral stationary phase, mobile phase components, and column temperature on the separation of flumequine enantiomers have been studied in detail. Target compounds were extracted from six different matrices with individual extraction procedure followed by cleanup using Cleanert C18 solid phase extraction cartridge. Good linearity (R²>0.9913) was obtained over the concentration range of 0.125 to 12.5 ng g^‐1 for each enantiomer in matrix‐matched standard calibration curves. The limits of detection and limits of quantification of two flumequine enantiomers were 0.015‐0.024 and 0.045‐0.063 ng g^‐1, respectively. The average recoveries of the targeted compounds varied from 82.3 to 110.5%, with relative standard deviation less than 11.7%. The method was successfully applied to the determination of flumequine enantiomers in multiple food matrices, providing a reliable method for evaluating the potential risk in animal productions.