Chiral Discrimination of Ofloxacin Enantiomers Using DNA Double Helix Regulated by Metal Ions

DNA‐based chiral selectors are constructed to discriminate ofloxacin enantiomers through metal‐ion anchoring on a special DNA double helix that contains successive GC pairs. The effects of metal ions involving Mg²⁺, Ni²⁺, Cu²⁺, Ag⁺, and Pt²⁺ were studied on the regulation of DNA chiral discrimination towards ofloxacin enantiomers. It is shown that DNA‐Cu(II) complexes exhibit the highest enantioselectivities at the [Cu²⁺]/base ratio of 0.1. The enantiomeric excess can reach 59% in R‐enantiomer after being adsorbed by the RET‐Cu(II) complex. Stereoselective recognition of ofloxacin enantiomers on the double helix is tunable via external stimulus, providing a programmable desorption process to regenerate DNA. This DNA‐based chiral selector exhibits excellent reusability without apparent loss of enantioselectivity after three cycles of adsorption and desorption. Chirality 26:249–254, 2014. © 2014 Wiley Periodicals, Inc.     

Multifunctional peptide‐based fluorescent chemosensor for detection of Hg2+, Cu2+ and S2− ions

A novel multifunctional fluorescent peptide sensor based on pentapeptide dansyl‐Gly‐His‐Gly‐Gly‐Trp‐COOH (D‐P5) was designed and synthesized efficiently using Fmoc solid‐phase peptide synthesis (SPPS). This fluorescent peptide sensor shows selective and sensitive responses to Hg²⁺ and Cu²⁺ among 17 metal ions and six anions studied in N‐2‐hydroxyethylpiperazine‐N‐2‐ethane sulfonic acid (HEPES) buffer solution. The peptide probe differentiates Hg²⁺ and Cu²⁺ ions by a ‘turn‐on’ response to Hg²⁺ and a ‘turn‐off’ response to Cu²⁺. Upon addition of Hg²⁺ or Cu²⁺ ions, the sensor displayed an apparent color change that was visible under an ultraviolet lamp to the naked eye. The limits of detection (LOD) of DP‐5 were 25.0 nM for Hg²⁺ and 85.0 nM for Cu²⁺; the detection limits for Cu²⁺ were much lower than the drinking water maximum contaminant levels set out by the United States Environmental Protection Agency (USEPA). It is noteworthy that both D‐P5‐Hg and D‐P5‐Cu systems were also used to detect S^2? successfully based on the formation of ternary complexes. The LODs of D‐P5‐Hg and D‐P5‐Cu systems for S^2? were 217.0 nM and 380.0 nM, respectively. Furthermore, the binding stoichiometry, binding affinity and pH sensitivity of the probe for Hg²⁺ and Cu²⁺ were investigated. This study gives new possibilities for using a short fluorescent peptide sensor for multifunctional detection, especially for anions.     

Separation of Ofloxacin and Its Six Related Substances Enantiomers by Chiral Ligand‐Exchange Chromatography

A chiral ligand‐exchange high‐performance liquid chromatography method was developed for the enantioseparation of ofloxacin and its six related substances termed impurities A, B, C, D, E, and F. The separation was performed on a conventional C₁₈ column. Different organic modifiers, copper salts, amino acids, the ratio of Cu²⁺ to amino acid, pH of aqueous phase, and column temperature were optimized. The optimal mobile phase conditions were methanol‐water systems consisting of 5 mmol/L copper sulfate and 10 mmol/L L‐isoleucine (L‐Ile). Under such conditions, good enantioseparation of ofloxacin and impurities A, C, E, and F could be observed with resolutions (R_S) of 3.54, 1.97, 3.21, 3.50, and 2.12, respectively. On the relationship between the thermodynamic parameters and structures of analytes, the mechanism of chiral recognition was investigated. It was concluded that ofloxacin and impurities A, C, E, and F were all enthalpically driven enantioseparation and that low column temperature was beneficial to enantioseparation. Furthermore, the structure–separation relationship of these analytes is also discussed. Chirality 27:843–849, 2015. © 2015 Wiley Periodicals, Inc.     

Adsorption of lead(II) from aqueous solution onto Hydrilla verticillata

The adsorption of Pb(II) onto Hydrilla verticillata was examined in aqueous solution with parameters of pH, adsorbent dosage, contact time and temperature. The linear Langmuir and Freundlich models were applied to describe equilibrium isotherms, and both models fitted well. The monolayer adsorption capacity of Pb(II) was found as 104.2 mg/g at pH 4 and 25°C. Dubinin–Radushkevich (D–R) isotherm model was also applied to the equilibrium data. The mean free energy of adsorption (15.81 kJ/mol) indicated that the adsorption of Pb(II) onto H. verticillata may be carried out via chemical ion-exchange mechanism. Thermodynamic parameters, free energy (ΔG ⁰), enthalpy (ΔH ⁰) and entropy (ΔS ⁰) of adsorption were also calculated. These parameters showed that the adsorption of Pb(II) onto H. verticillata was a feasible, spontaneous and exothermic process in nature. The influence of Cd²⁺, Cu²⁺ and Ni²⁺ on adsorption of Pb²⁺ onto H. verticillata was studied, too. In the investigated range of operating conditions, it was found that the existence of Cd ²⁺, Cu ²⁺ and Ni ²⁺ had no impact on the adsorption of Pb²⁺.     

Synthesis and Properties of a Novel Pyridineoxazoline Containing Optically Active Helical Polymer as a Catalyst Ligand for Asymmetric Diels–Alder Reaction

A novel pyridineoxazoline (PyOx) containing helical polymer, poly{(–)‐(S)‐4‐tert‐butyl‐2‐[5‐(4‐tert‐butylphenyl)‐3‐vinylpyridin‐2‐yl]‐oxazoline} ( PA ), was designed and synthesized to approach the effect of chain conformation on the catalytic property. Its complex with Cu(OTf)₂, i.e., Cu(II)-PA , was employed to catalyze the homogeneous Diels–Alder (D–A) reaction of alkenoyl pyridine N‐oxides with cyclopentadiene in tetrahydrofuran. Compared with the previously reported copper complex, Cu(II)-P1 (RSC Advances, 2015, 5 , 2882), which was derived from a nonhelical poly[(–)‐(S)‐4‐tert‐butyl‐2‐(3‐vinylpyridin‐2‐yl)‐oxazoline], Cu(II)-PA exhibited a remarkably enhanced enantioselectivity and reaction rate. However, its enantioselectivity was lower than the Cu(II) complex of (–)‐(S)‐4‐tert‐butyl‐2‐[5‐(4‐tert‐butylphenyl)‐3‐vinylpyridin‐2‐yl]‐oxazoline ( Cu(II)-A ), a low molar mass model compound. Chirality 27:523–531, 2015. © 2015 Wiley Periodicals, Inc.     

Multimode selective detection of mercury by chiroptical fluorescent sensors based on methionine/cysteine

Two multimode Hg(II) sensors, L‐MethBQA and L‐CysBQA, were obtained by fusing methionine or S‐methyl cysteine, into a bis‐quinolyl amine‐based chiral podand scaffold. Quinolyl groups serve as the fluorophore and possess nitrogen lone pairs capable of chelating metal ions. On exposure to Hg²⁺ or Zn²⁺, these sensors show signal enhancement in fluorescence. However, Cu²⁺ quenches their fluorescence in 30:70 acetontrile/water. L‐CysBQA complexes with Hg²⁺, producing an exciton‐coupled circular dichroism spectrum with the opposite sign to the one that is produced by Cu²⁺ or Zn²⁺ complexation. L‐CysBQA binds Hg²⁺ more strongly than Zn²⁺ and is shown to differentiate Hg²⁺ from other metal ions, such as Zn²⁺, Cu²⁺, Ni²⁺, and Pb²⁺, exceptionally well. The synergistic use of relatively soft sulfur, quinoline‐based chiral ligands and chiroptically enhanced fluorescence detection results in high sensitivity and selectivity for Hg²⁺. Chirality, 2011. © 2011 Wiley‐Liss, Inc.     

Inhibitory effects of copper on bacteria related to the free ion concentration

Cu²⁺ ion determinations were carried out in complex and in inorganic salts-glycerol media, to which increasing amounts of Cu(II) had been added, with the ion-specific Cu(II)-Selectrode. Likewise, complexing capacity of bacterial suspensions was estimated by titration with CuSO₄.Copper-sensitive bacteria, e.g.,Klebsiella aerogenes, were inhibited in their growth and survival in the range of 10^–8–10^–6 M Cu²⁺ ion concentrations. In copper-buffered complex media, high copper loads could be tolerated, as growth proceeded with most of the copper bound to medium components. In low-complexing mineral salts media, in which high Cu²⁺ ion concentrations exist at low copper loads, there was competition of Cu²⁺ for binding sites of the cells. Total allowed copper was then determined by the ratio of copper to biomass.Copper-resistant bacteria could be isolated from a stock solution of CuSO₄, containing 100 ppm Cu(II). They were of thePseudomonas type and showed a much higher tolerance towards Cu²⁺, up to 10^–3 M.     

Oscillatoria anguistissima: A Promising Cu2+ Biosorbent

Oscillatoria anguistissima rapidly adsorbs Cu²⁺ from aqueous solution. The adsorption of Cu²⁺ followed Freundlich Isotherm, and the amount of Cu²⁺ removed from solution increased with increasing Cu²⁺ concentration. The adsorption is pH dependent, and maximum Cu²⁺ removal occurs at pH 5. Of the various pretreatments, HCl treatment of the biomass increased the capacity for Cu²⁺ removal. Presence of Mg²⁺ and Ca²⁺ resulted in decline in the Cu²⁺ adsorption capacity of Oscillatoria cells. This species could also effectively remove Cu²⁺ from mine water containing 68.4 μg/ml of Cu²⁺ at pH 3.45. Received: 23 December 1996 / Accepted: 20 February 1997     

Studies of biosorption of Pb2+, Cd2+ and Cu2+ from aqueous solutions using Adansonia digitata root powders

The potentials of Adansonia digitata root powders (ADRP) for adsorption of Pb²⁺, Cd²⁺ and Cu²⁺ from aqueous solutions was investigated. Physico-chemical analysis of the adsorbent (ADRP) shows that hydroxyl, carbonyl and amino groups were predominant on the surface of the adsorbent. Scanning Electron Microscope (SEM) image revealed its high porosity and irregular pores in the adsorbent while the Energy Dispersive X-ray Spectrum showed the major element with 53.0% Nitrogen, 23.8% carbon, 9.1% calcium, 7.5% potassium and 6.6% magnesium present. The found optimal conditions were: initial concentration of the metal ions = 0.5 mg/L, pH = 5, contact time = 90 min, adsorbent dose = 0.4 g and particle size = 32 µm. Freundlich isotherm showed good fit for the adsorption of Pb²⁺, Cd²⁺ and Cu²⁺. Dubinin-Radushkevich isotherm revealed that the adsorption processes were physisorption Cd(II) and Cu(II) but chemisorption with respect to Pb(II) ions. The kinetics and thermodynamic studies showed that Pseudo-second order and chemisorptions provided the best fit to the experimental data of Pb (II) ions only. Batch desorption result show that desorption in the acidic media for the metal ions were more rapid and over 90% of the metal ions were recovered from the biomass.     

Cost-effective copper removal by electrosorption powered by microbial fuel cells

This work studied a cost-effective electrosorption that driven by microbial fuel cells (MFC-sorption) to remove Cu²⁺ from wastewater without an external energy supply. The impact factors, adsorption isotherms and kinetics of the novel process were investigated. It indicated that a low electrolyte concentration and a high solution pH could enhance the Cu²⁺ removal efficiency, while the adsorption capacity increased with the increase of numbers of MFCs in series and the initial Cu²⁺ concentration. The adsorption isotherms study indicated that the monolayer adsorption in MFC-sorption was dominant. The kinetics study suggested the increase of initial Cu²⁺ concentration could enhance the initial adsorption rate. The electrode characterizations verified the existence of Cu₂O and Cu on the electrode surface of active carbon fibers (ACFs), suggesting that MFC-sorption was not only an adsorption process, but also a redox reaction process.     

High Power Factors of Thermoelectric Colusites Cu26T2Ge6S32 (T = Cr,Mo, W): Toward Functionalization of the Conductive “Cu–S” Network

The introduction of hexavalent T⁶⁺ cations in p‐type thermoelectric colusites Cu₂₆T₂Ge₆S₃₂ (T = Cr, Mo, W) leads to the highest power factors among iono‐covalent sulfides, ranging from 1.17 mW m^?1 K^?2 at 700 K for W to a value of 1.94 mW m^?1 K^?2 for Cr. In Cu₂₆Cr₂Ge₆S₃₂, ZT reaches values close to unity at 700 K. The improvement of the transport properties in these new sulfides is explained on the basis of electronic structure and transport calculations keeping in mind that the relaxation time is significantly influenced by the size and the electronegativity of the interstitial T cation. The rationale is based on the concept of a conductive “Cu–S” network, which in colusites corresponds to the more symmetric parent structure sphalerite. A detailed structural analysis of these colusites shows that the distortion of the conductive network is influenced by the presence in the structure of mixed octahedral–tetrahedral [TS₄]Cu₆ complexes where the T cations are underbonded to sulfur and form metal–metal interactions with copper, Cu–T distances decreasing from 2.76 Å for W to 2.71 Å for Cr. The interactions between these complexes are responsible for the outstanding electronic transport properties. By contrast, the thermal conductivity is not significantly affected.     

A N‐(2‐hydroxyethyl)piperazine dangled 2,5‐diphenyl‐1,3,4‐oxadiazole‐based fluorescent sensor for selective relay recognition of Cu2+ and sulfide in water

A new 2,5‐diphenyl‐1,3,4‐oxadiazole‐based derivative (L) was synthesized and applied as a highly selective and sensitive fluorescent sensor for relay recognition of Cu²⁺ and S^2? in water (Tris–HCl 10 mM, pH = 7.0) solution. L exhibits an excellent selectivity to Cu²⁺ over other examined metal ions with a prominent fluorescence ‘turn‐off’ at 392 nm. L interacts with Cu²⁺ through a 1:2 binding stoichiometry with a detection limit of 4.8 × 10^–7 M. The on‐site formed L–2Cu²⁺ complex exhibits excellent selectivity to S^2? with a fluorescence ‘off–on’ response via a Cu²⁺ displacement approach. Copyright © 2016 John Wiley & Sons, Ltd.     

Spectroscopic and equilibrium dialysis studies of poly(α-L-glutamic acid)–Cu(II) complexes in the pH range 4–7

The formation of complex between the Cu²⁺ ion and poly(α-L -glutamic acid) [poly(Glu)] in 150 mM NaCl solutions was studied by uv–visible absorption and equilibrium dialysis methods at the mixing ratios of Glu residues to Cu²⁺, R, of 32, 16, and 8 and in the pH range 4–7. The results showed that more than 90% of Cu²⁺ ions bind to the poly(Glu) at pH > 4.9, but the bound Cu(II) begins to dissociate with a decrease in pH. The absorption spectra of bound Cu(II) varied with pH and R in a complicated manner. Three different component spectra were disclosed from the analysis of the pH dependence of the bound spectra. We concluded that poly(Glu)–Cu(II) complexes fall into three classes in the pH range 4–7, with the proportions of these complexes varying with both pH and R. The three complexes predominate either in the helix or extended-coil region, in the helix–coil transition region, or in the helix-aggregate region. The stability constant and binding mode of each Cu(II)–Glu complex were estimated from the dialysis data. With these results, the possible structure of each complex is discussed.     

Separation of hexahistidine fusion proteins with immobilized metal ion affinity chromatographic (IMAC) sorbents derived from MN+‐tacn and its derivatives

The capabilities of a new class of immobilized (im) metal ion chelate complexes (IMCCs), derived from 1,4,7‐triazacyclononane (tacn), bis(1,4,7‐triazacyclononyl) ethane (dtne) and bis(1,4,7‐triazacyclononyl)propane (dtnp) complexed with the borderline metal ions Cu²⁺, Ni²⁺, Zn²⁺, Mn²⁺, Co²⁺, and Cr³⁺, for the purification of proteins have been investigated. In particular, the binding behavior of a model protein, the C‐terminal hexahistidine tagged recombinant fusion protein Schistosoma japonicum glutathione S‐transferase‐Saccharomyces cerevisiae mitochondrial ATP synthase δ‐subunit (GST‐δATPase‐His₆), with these new immobilized metal ion affinity chromatographic (IMAC) sorbents was compared to the properties of a conventional sorbent, derived from immobilized Ni(II)‐nitrilotriacetic acid (im‐Ni²⁺‐NTA). Investigations using the recombinant GST‐δATPase‐His₆ and recombinant S. japonicum glutathione S‐transferase (GST) lacking a hexahistidine tag have confirmed that the C‐terminal tag hexahistidine residues were required for the binding process to occur with these IMAC systems. The results also confirm that recombinant fusion proteins such as GST‐δATPase‐His₆ can be isolated in high purity with these IMAC systems. Moreover, these new macrocyclic systems manifest different selectivity features as a function of pH or ionic strength when compared to the conventional, unconstrained iminodiacetic acid (IDA) or NTA chelating ligands, complexed with borderline metal ions such as Cu²⁺ or Ni²⁺, as IMAC systems. Biotechnol. Bioeng. 2009;103: 747–756. © 2009 Wiley Periodicals, Inc.     

Copper Toxicity Affects Photosystem II Electron Transport at the Secondary Quinone Acceptor, Q(B)

The nature of Cu²⁺ inhibition of photosystem II (PSII) photochemistry in pea (Pisum sativum L.) thylakoids was investigated monitoring Hill activity and light emission properties of photosystem II. In Cu²⁺-inhibited thylakoids, diphenyl carbazide addition does not relieve the loss of Hill activity. The maximum yield of fluorescence induction restored by hydroxylamine in Tris-inactivated thylakoids is markedly reduced by Cu²⁺. This suggests that Cu²⁺ does not act on the donor side of PSII but on the reaction center of PSII or on components beyond. Thermoluminescence and delayed luminescence studies show that charge recombination between the positively charged intermediate in water oxidation cycle (S₂) and negatively charged primary quinone acceptor of pSII (Q_A⁻) is largely unaffected by Cu²⁺. The S₂Q_B⁻ charge recombination, however, is drastically inhibited which parallels the loss of Hill activity. This indicates that Cu²⁺ inhibits photosystem II photochemistry primarily affecting the function of the secondary quinone electron acceptor, Q_B. We suggest that Cu²⁺ does not block electron flow between the primary and secondary quinone acceptor but modifies the Q_B site in such a way that it becomes unsuitable for further photosystem II photochemistry.     

A membrane-free baffled microbial fuel cell for cathodic reduction of Cu(II) with electricity generation

A membrane-free baffled microbial fuel cell (MFC) was developed to treat synthetic Cu(II) sulfate containing wastewater in cathode chamber and synthetic glucose-containing wastewater fed to anode chamber. Maximum power density of 314 mW/m³ with columbic efficiency of 5.3% was obtained using initial Cu²⁺ concentration of 6400 mg/L. Higher current density favored the cathodic reduction of Cu²⁺, and removal of Cu²⁺ by 70% was observed within 144 h using initial concentration of 500 mg/L. Powder X-ray diffraction (XRD) analysis indicated that the Cu²⁺ was reduced to Cu₂O or Cu₂O plus Cu which deposited on the cathode, and the deficient cathodic reducibility resulted in the formation of Cu₄(OH)₆SO₄ at high initial Cu²⁺ concentration (500-6400 mg/L). This study suggested a novel low-cost approach to remove and recover Cu(II) from Cu²⁺-containing wastewater using MFC-type reactor.     

Inhibition of bovine plasma amine oxidase by superoxide dismutase active Cu(II) complexes

Aqueous Cu²⁺ and Cu(II) complexes of salicylate, lysine, and tyrosine decrease the rate of benzylamine oxidation by bovine plasma amine oxidase. Bissalicylato Cu(II) and Cu²⁺ inhibit non-competitively with respect to benzylamine. Lysine, tyrosine, Cu(EDTA)^2?, Zn²⁺, and Co²⁺ do not inhibit, and erythrocyte Cu, Zn superoxide dismutase shows only slight inhibition of the amine oxidase. The data are most consistent with an inhibitory mechanism involving dismutation of O₂^? by the Cu(II) complexes within a site relatively inaccessible to the enzyme superoxide dismutase. Excess lysine significantly decreases inhibition by the bis-lysine complex of Cu(II).     

Synthesis, characterization, and DNA binding and cleavage properties of copper(II)-tryptophanphenyl-alanine-1,10-phenanthroline/2,2'-bipyridine complexes

The mononuclear dipeptide‐based Cu^II complexes [Cu^II(trp‐phe)(phen)(H₂O)] ⋅ ClO₄ ( 1 ) and [Cu^II(trp‐phe)(bpy)(H₂O)] ⋅ ClO₄ ( 2 ) (trp‐phe=tryptophanphenylalanine, phen=1,10‐phenanthroline, bpy=2,2′‐bipyridine) were isolated, and their interaction with DNA was studied. They exhibit intercalative mode of interaction with DNA. The intercalative interaction was quantified by Stern Volmer quenching constant (K_sq=0.14 for 1 and 0.08 for 2 ). The Cu^II complexes convert supercoiled plasmid DNA into its nicked circular form hydrolytically at physiological conditions at a concentration as low as 5 μM (for 1 ) and 10 μM (for 2 ). The DNA hydrolysis rates at a complex concentration of 50 μM were determined as 1.74 h⁻¹ (R=0.985) for 1 and 0.65 h⁻¹ (R=0.965) for 2 . The rate enhancement in the range of 2.40–4.10×10⁷‐fold compared to non‐catalyzed double‐stranded DNA is significant. This was attributed to the presence of a H₂O molecule in the axial position of the Cu complexes.     

Evaluation of a silica-coated magnetic nanoparticle for the immobilization of a His-tagged lipase

Magnetic particles of size 10 nm have been coated with silica to a mean diameter of 40 nm and charged with Cu²⁺ ions via a multidentate ligand, iminodiacetic acid (IDA), for the immobilization of His-tagged Bacillus stearothermopilus L1 lipase. Microporous (average pore diameter of 60 Å) silica gel with a mean particle diameter of 115 µm has been used as a comparative support material. The molar ratio of Cu²⁺ to IDA was found to be 1:1.14 and 1:1.99 in the silica gel and the silica-coated magnetic nanoparticles (SiMNs), respectively. The specific activity of the immobilized enzyme was found to conform to the following order: Cu²⁺-charged SiMN>SiMN>Cu²⁺-charged silica gel>silica gel. When it was immobilized on the Cu²⁺-charged SiMNs, over 70% of the initial activity of the lipase remained after it had been reused five times. However, only 20% of the initial activity remained after the enzyme immobilized on the Cu²⁺-charged silica gel had been reused five times. For the enzyme immobilized on supports without Cu²⁺ cations, all activity was lost after threefold reuse. The differences in the specific activities and the efficiencies of reuse of the enzymes immobilized on the various support materials are discussed in terms of immobilization mechanisms (physical adsorption vs. coordination bonding), mass transfer of a substrate and a product of the enzyme reaction, and the status of the Cu (Cu bound to the IDA on the silica layer vs. Cu directly adsorbed on the silica layer).     

Enantiomeric Specificity of Biologically Significant Cu(II) and Zn(II) Chromone Complexes Towards DNA

Novel chiral Schiff base ligands (R)/(S)‐2‐amino‐3‐(((1‐hydroxypropan‐2‐yl)imino)methyl)‐4H‐chromen‐4‐one (L₁ and L₂) derived from 2‐amino‐3‐formylchromone and (R/S)‐2‐amino‐1‐propanol and their Cu(II)/Zn(II) complexes ( R1 , S1 , R2 , and S2 ) were synthesized. The complexes were characterized by elemental analysis, infrared (IR), hydrogen (¹H) and carbon (¹³C) nuclear magnetic resonance (NMR), electrospray ionization‐mass spectra (ESI‐MS), and molar conductance measurements. The DNA binding studies of the complexes with calf thymus were carried out by employing different biophysical methods and molecular docking studies that revealed that complexes R1 and S1 prefers the guanine–cytosine‐rich region, whereas R2 and S2 prefers the adenine–thymine residues in the major groove of DNA. The relative trend in K_b values followed the order R1 S1 R2 S2 . This observation together with the findings of circular dichroic and fluorescence studies revealed maximal potential of (R)‐enantiomeric form of complexes to bind DNA. Furthermore, the absorption studies with mononucleotides were also monitored to examine the base‐specific interactions of the complexes that revealed a higher propensity of Cu(II) complexes for guanosine‐5′‐monophosphate disodium salt, whereas Zn(II) complexes preferentially bind to thymidine‐5′‐monophosphate disodium salt. The cleavage activity of R1 and R2 with pBR322 plasmid DNA was examined by gel electrophoresis that revealed that they are good DNA cleavage agents; nevertheless, R1 proved to show better DNA cleavage ability. Topoisomerase II inhibitory activity of complex R1 revealed that the complex inhibits topoisomerase II catalytic activity at a very low concentration (25 μM). Furthermore, in vitro antitumor activity of complexes R1 and S1 were screened against human carcinoma cell lines of different histological origin. Chirality 24:977–986, 2012. © 2012 Wiley Periodicals, Inc.