Production of d-arabitol by a newly isolated Kodamaea ohmeri

A new yeast, isolated from natural osmophilic sources, produces d-arabitol as the main metabolic product from glucose. According to 18S rRNA analysis, the NH-9 strain belongs to the genus Kodamaea. The optimal culture conditions for inducing production of d-arabitol were 37 °C, neutral pH, 220 rpm shaking, and 5% inoculum. The yeast produced 81.2 ± 0.67 g L⁻¹ d-arabitol from 200 g L⁻¹ d-glucose in 72 h with a yield of 0.406 g g⁻¹ glucose and volumetric productivity Q_\textP Q_{\text{P}} of 1.128 g L⁻¹ h⁻¹. Semi-continuous repeated-batch fermentation was performed in shaker-flasks to enhance the process of d-arabitol production by Kodamaea ohmeri NH-9 from d-glucose. Under repeated-batch culture conditions, the highest volumetric productivity was 1.380 g L⁻¹ h⁻¹.     

Optimization of medium components for phytase production by E. coli using response surface methodology

The medium for recombinant phytase production by E. coli BL21 was optimized using response surface methodology. A 2³ central composite experimental design was used to study the combined effect of the medium components, tryptone, yeast extract and NaCl. Addition of 2?g/l glucose to the medium greatly influenced the phytase production. The optimization of the medium has increased the phytase production by 1.2 times. The incorporation of 2?g/l glucose significantly enhanced the phytase production by 1.58 times, showing an overall 2.78 fold increase before optimization and other modifications of the medium. The optimized medium with glucose showed a highest phytase activity of 2250?U/l.     

响应面法优化獐牙菜苦苷生物转化条件

采用响应面法对獐牙菜苦苷的生物转化条件进行优化,首先应用Plackett-Burman方法筛选出对转化具有显著性影响的因素,再用中心响应面法的Response Optimizer工具对最优转化条件进行了分析和预测,最后对预测结果进行了验证。结果表明,獐牙菜新碱的最优化转化条件(mg/mL)为MgSO4.7H2O 5.14、MnSO4.4H2O 3.42、葡萄糖9.95、蛋白胨9.24、pH5.80。在此条件下獐牙菜新碱的最大转化产率为17.64%;红百金花内酯的最优转化条件(mg/mL)为MgSO4.7H2O 4.09、MnSO4.4H2O6.07、葡萄糖7.37、酵母膏7.37,pH5.73。在此条件下红百金花内酯的最大转化产率为8.81%。     

Production of activated carbon from coconut shell: optimization using response surface methodology

The production of activated carbon from coconut shell treated with phosphoric acid (H3PO4) was optimized using the response surface methodology (RSM). Fifteen combinations of the three variables namely; impregnation ratio (1, 1.5, and 2); activation time (10, 20, and 30 min); and activation temperature (400, 450, and 500 degrees C) were optimized based on the responses evaluated (yield, bulk density, average pore diameter, small pore diameter, and number of pores in a unit area). Pore diameters were directly measured from scanning electron microscope (SEM) images. Individual second-order response surface models were developed and contour plots were generated for the optimization analysis. The optimum range identified for impregnation ratio was from 1.345 to 2, while for the activation time was from 14.9 to 23.9 min. For the activation temperature it was from 394 to 416 degrees C. The optimum points are 1.725, 19.5 min, and 416 degrees C, respectively. The models were able to predict well the values of the responses when the optimum variable parameters were validated as proven by the generally acceptable values of the residual percentages. Direct characterization of the pores using the SEM was found to be a good technique to actually see the pores and get actual measurements. Additionally, RSM has also proven to be a good tool in optimization analysis to get not only optimum production condition points but ranges, which are crucial for the flexibility of the production process, as well.     

A glycerol-inducible thermostable lipase from Bacillus sp.: medium optimization by a Plackett-Burman design and by response surface methodology

The production of a neutral lipase from a Bacillus sp. was improved tremendously (193-fold) following media optimization involving both the "one-at-a-time" and the statistical designing approaches. The present lipase was poorly induced by oils, instead its production was induced in the presence of sugars and sugar alcohols, mainly galactose, lactose, glycerol, and mannitol. A high inoculum density of 15% v/v (A550 = 0.8) led to maximum lipase production. Interestingly, the enzyme induction was growth independent, a property very different from most of the lipases investigated to date. The optimal composition of the growth medium to achieve maximum lipase production was determined to be as follows: NH4Cl, 35 g x L(-1); glycerol, 10 mL x L(-1); K2HPO4, 3 g x L(-1); KH2PO4, 1 g x L(-1); MgSO4.7H2O, 0.1 g x L(-1); glucose, 2 g x L(-1); MgCl2, 0.6 mmol x L(-1), with 15% inoculum density and an incubation period of 24 h. About 62 U x mL(-1) of enzyme production was achieved in the optimized medium.     

Inulinase overproduction by a mutant of the marine yeast Pichia guilliermondii using surface response methodology and inulin hydrolysis

In this study, in order to isolate inulinase overproducers from the marine yeast Pichia guilliermondii, its cells were treated by using UV light and LiCl. The mutant M-30 with enhanced inulinase production was obtained and was found to be stable after cultivation for 20 generations. Response surface methodology (RSM) was used to optimize the medium compositions and cultivation conditions for inulinase production by the mutant M-30 in liquid fermentation. Inulin, yeast extract, NaCl, temperature, pH for maximum inulinase production by the mutant M-30 were found to be 20.0 g/l, 5.0 g/l, 20.0 g/l, 28 °C and 6.5, respectively. Under the optimized conditions, 127.7 U/ml of inulinase activity was reached in the liquid culture of the mutant M-30 whereas the predicted maximum inulinase activity of 129.8 U/ml was derived from RSM regression. Under the same conditions, its parent strain only produced 48.1 U/ml of inulinase activity. This is the highest inulinase activity produced by the yeast strains reported so far. We also found that inulin could be actively converted into monosaccharides by the crude inulinase.     

Statistical optimization of the medium composition by response surface methodology to enhance schizophyllan production by Schizophyllum commune

The response surface methodology (RSM) involving central composite design (CCD) was employed to optimize the fermentation medium for the cell growth and schizophllan production by Schizophyllum commune CGMCC 5.113 in submerged culture at pH 6.5 and 26 degrees C. The four variables involved in this study were glucose, yeast extract, ammonium nitrate, and magnesium sulfate. The statistical analysis of the results showed that, in the range studied, glucose and yeast extract had a highly significant effect on schizophyllan production. The optimal medium for schizophyllan production calculated from the regression model of RSM was as follows: glucose, 18 g/l; yeast extract, 0.5 g/l; NH4NO3, 0.48 g/l; and MgSO4, 0.05 g/l, with a predicted maximum schizophyllan production of 11.74 g/l. These predicted values were experimentally validated. The excellent correlation between predicted and measured values justifies the validity of the response model. The results of bioreactor fermentation also show that the optimized medium enhanced schizophyllan production (12.80 g/l) by S. commune in a 5-1 fermenter.     

响应面法优化福鸽霉素发酵培养基

采用Plackett-Burman设计法,对影响纤维堆囊菌So ceMWXAB-125产生福鸽霉素的9个因素进行了筛选。结果表明,影响该菌产生福鸽霉素的主要营养因素为马铃薯淀粉、CaCl2和脱脂奶粉。在此基础上,采用响应面法对其中3个显著因子的最佳水平范围进行研究,利用Design-Expert软件进行二次回归分析得知,马铃薯淀粉、CaCl2和脱脂奶粉的质量浓度分别为8.05、2.72和10.00 g/L时,福鸽霉素的产量从67 mg/L提高到119.98 mg/L。     

响应面法优化嗜热链球菌增殖培养基

目的 为了降低嗜热链球菌工业化生产成本,提高其发酵活菌数,对嗜热链球菌原始培养基的成分进行了响应面优化.方法 利用Design-Expert软件首先采用Plackett-Burman试验设计筛选出了影响嗜热链球菌生长的显著因子,再依据响应面法设计试验,得到嗜热链球菌的优化培养基配比.结果 乳糖、酵母粉和L-半胱氨酸为嗜热链球菌生长的显著性因子;优化后培养基配比由结果分析可知,当活菌数达到最大值时,即:乳糖的浓度为3.6％,酵母粉的浓度为1.74％,L-半胱氨酸的浓度为1.1％,牛肉蛋白胨1％,酪胨1％,KH2PO4 0.20％,Na2 HPO40.20％,叶温-80 0.1％活菌数为最高2.34×109 CFU/mL.结论 采用响应面分析法优化的培养基较经典TPY培养基活菌数提高了近2～3倍.     

Production of a protease inhibitor from edible mushroom Agaricus bisporus and its statistical optimization by response surface methodology

The production of a protease inhibitor from Agaricus bisporus through solid-state fermentation was studied. The purpose was to produce protease inhibitor from natural, cheap, and readily available carbon and nitrogen sources. Solid-state fermentation enhanced the mycelia growth and also gave a higher yield of the product. Further, fungal growth and other production parameters were statistically optimized. The specificity of the inhibitor was tested and was effective against trypsin. Screening of significant factors (wheat bran, cyanobacterial biomass, initial pH, temperature, incubation period, and moisture content and inoculum size) was performed using Plackett–Burman design. Central composite design was used to determine the optimized values of the significant variables which were found to be temperature (27.5°C), incubation time (156?hr), cyanobacterial biomass (1?g), and moisture content (50%) and gave a statistical yield of 980 PIU/g which was 25.6% higher than experimental yield (780 PIU/g). The inhibitor was purified by ammonium sulfate precipitation and diethylaminoethyl (DEAE) cellulose chromatography (yield 43.89% and 0.21%, respectively) and subjected to reversed-phase HPLC to validate its identity. Since protease inhibitors act against proteases, finding ample therapeutic roles; the isolated protease inhibitor from A. bisporus can also be a probable medicinal agent after its further characterization.     

Medium optimization by combination of response surface methodology and desirability function: an application in glutamine production

An optimization strategy based on desirability function approach (DFA) together with response surface methodology (RSM) has been used to optimize production medium in L-glutamine fermentation. Fermentation problems often force to reach a compromise between different experimental variables in order to achieve the most suitable strategy applying in industrial production. The importance of the use of multi-objective optimization methods lies in the ability to cope with this kind of problems. A sequential RSM with different combinations of glucose and (NH₄)₂SO₄ was performed to attain the optimal medium (OM-1) in glutamine production. Based on the result of RSM and the evaluation of production cost, a more economical optimal medium (OM-2) was obtained with the aid of DFA. In DFA study, glutamate, the main by-product in glutamine fermentation as another response was considered. Compared with OM-1 in validated experiment, similar amounts of glutamine were obtained in OM-2 while the concentration of glutamate and the production cost decreased by 53.6 and 7.1%, respectively.     

Optimization of fermentation medium for amidase production by response surface methodology

采用响应面分析方法,对阿萨希丝孢酵母(Trichosporon asahii)ZZB-1产酰胺酶的发酵培养基进行了优化.运用单因子试验筛选出麦芽糖和酵母浸膏为最适碳源、氮源,金属离子Ca2+、Mn2+可提高发酵酰胺酶产量;通过最陡爬坡实验逼近以上4个因子的最大响应区域后,采用Box-Behnken响应面分析法,确定产酰胺酶最佳发酵培养基为麦芽糖18.84 g/L、酵母浸膏9.55 g/L、NaCl 5g/L、KH2 PO41g/L、MgSO4·7H2O 0.2 g/L、FeSO40.001g/L、CaCO370.84 μmol/L、MnSO4 65.39 μmol/L(1％丙烯酸诱导),NH4·H2O调节pH至7.0.培养基优化后酰胺酶产量由初始2554U/L提高到4156 U/L,为原始发酵培养基配方酶活产量的1.63倍.     

响应面法优化产酰胺酶发酵培养基

采用响应面分析方法,对阿萨希丝孢酵母（Trichosporon asahii）ZZB-1产酰胺酶的发酵培养基进行了优化。运用单N子试验筛选出麦芽糖和酵母浸膏为最适碳源、氮源,金属离子Ca^2＋、Mn^2＋可提高发酵酰胺酶产量;通过最陡爬坡实验逼近以上4个因子的最大响应区域后,采用Box—Behnken响应面分析法,确定产酰胺酶最佳发酵培养基为麦芽糖18．84g／L、酵母浸膏9．55g／L、NaC15g／L、KH2PO41g／L、MgSO4·7H2O0．2g／L、FeS040．001g／L、CaC0370．84μmol／L、MnS0465．39肚mo[／L（1％丙烯酸诱导）,NH4·H2O调节pH至7．0。培养基优化后酰胺酶产量由初始2554U／L提高到4156U／L,为原始发酵培养基配方酶活产量的1．63倍。     

Enhanced production of fibrinolytic enzyme by a new Xanthomonas oryzae IND3 using low-cost culture medium by response surface methodology

Cardiovascular diseases (CVDs) cause high mortality throughout the world. Existing fibrinolytic agents are highly expensive and have many side effects. Microbial fibrinolytic enzymes are very much considered as novel therapeutic candidate for the treatment of CVDs. Reports on fibrinolytic enzyme from Xanthomonas sp. is lacking. This study reports fibrinolytic enzymes from Xanthomonas oryzae IND3 as it shows hyperactivity on fibrin-agarose plates. This organism utilized various agro-industrial wastes for enzymes production. Among all, cow dung enhanced more enzyme production, hence it was used as the low-cost substrate for statistical optimization of fibrinolytic protease in Solid state fermentation. Response surface methodology was employed to optimize the factors and enhanced yield by 4-fold. The interactions among the variables, viz, sucrose, yeast extract, and pH of the medium were investigated using Central Composite Design (CCD). The predicted fibrinolytic enzyme activity was 2340 U/g, and the observed fibrinolytic enzyme activity was 2294?±?12.8?U/g. The fibrinolytic enzyme degraded blood clot in vitro completely. This study is the first report on statistical optimization of fibrinolytic enzyme production in SSF from Xanthomonas sp. The crude extract has immense activity on proteinaceous wastes. The production of fibrinolytic protease using the low-cost substrate could reduce the production cost of enzyme.     

Box-Benhnken响应面法优化白及愈伤组织的增殖培养基配方

为了提高白及组培过程中愈伤的增殖系数,以白及种子为外植体,利用响应面法对诱导愈伤的增殖培养基中的激素水平进行优化。在添加不同浓度的6-BA（6-苄氨基嘌呤）和2,4-D（2,4-二氯苯氧乙酸）的正交试验诱导愈伤基础上,根据Box-Benhnken（BBD）试验设计原理,采用三因素三水平的方法对3个激素的不同浓度水平进行组合实验。结果显示,通过回归模型分析获得增殖诱导的最佳培养基为MS+0.801 mg/L 6-BA（6-苄氨基嘌呤）+1.192 mg/L 2,4-D（2,4-二氯苯氧乙酸）+0.724 mg/L NAA（萘乙酸）。以优化后培养基进行愈伤组织继代发现其增殖系数为6.154 2,为理论预测值的99.74%。利用响应面法对愈伤组织增殖培养基进行优化,为以愈伤组织为研究材料的细胞悬浮培养、遗传转化、种苗快繁等研究奠定了基础。     

Production of thermostable pullulanase by Clostridium thermosulfurogenes SV2 in solid-state fermentation: optimization of nutrients levels using response surface methodology

The optimization of nutrient levels for the production of thermostable pullulanase by Clostridium thermosulfurogenes SV2 in solid-state fermentation (SSF) was carried out using response surface methodology based on the central composite rotatable design. The design contains a total of 54 experimental trials with the first 32 organized in a fractional factorial design and experimental trials from 33-40 and 51-54 involving the replication of the central points. The design was employed by selecting potato starch, magnesium chloride, ferrous sulfate, corn steep liquor and pearl millet flour as model factors. Among the five independent variables studied, except magnesium chloride, all the nutrients were found significant. 16.5% potato starch, 2.5% corn steep, 0.015% ferrous sulfate and 14% pearl millet flour have been found optimal for the production of thermostable pullulanase. The strain SV2 produced 10% more pullulanase in the nutritionally optimized solid-state fermentation medium containing only four nutrients.     

Process optimization of an auger pyrolyzer with heat carrier using response surface methodology

A 1 kg/h auger reactor utilizing mechanical mixing of steel shot heat carrier was used to pyrolyze red oak wood biomass. Response surface methodology was employed using a circumscribed central composite design of experiments to optimize the system. Factors investigated were: heat carrier inlet temperature and mass flow rate, rotational speed of screws in the reactor, and volumetric flow rate of sweep gas. Conditions for maximum bio-oil and minimum char yields were high flow rate of sweep gas (3.5 standard L/min), high heat carrier temperature (∼600 °C), high auger speeds (63 RPM) and high heat carrier mass flow rates (18 kg/h). Regression models for bio-oil and char yields are described including identification of a novel interaction effect between heat carrier mass flow rate and auger speed. Results suggest that auger reactors, which are rarely described in literature, are well suited for bio-oil production. The reactor achieved liquid yields greater than 73 wt.%.