Competitive binding of Fe<Superscript>3+</Superscript>, Cr<Superscript>3+</Superscript>, and Ni<Superscript>2+</Superscript> to transferrin

Competitive binding of Fe³⁺, Cr³⁺, and Ni²⁺ to transferrin (Tf) was investigated at various physiological iron to Tf concentration ratios. Loading percentages for these metal ions are based on a two M ⁿ⁺ to one Tf (i.e., 100% loading) stoichiometry and were determined using a particle beam/hollow cathode–optical emission spectroscopy (PB/HC-OES) method. Serum iron concentrations typically found in normal, iron-deficient, iron-deficient from chronic disease, iron-deficient from inflammation, and iron-overload conditions were used to determine the effects of iron concentration on iron loading into Tf. The PB/HC-OES method allows the monitoring of metal ions in competition with Fe³⁺ for Tf binding. Iron-overload concentrations impeded the ability of chromium (15.0 μM) or nickel (10.3 μM) to load completely into Tf. Low Fe³⁺ uptake by Tf under iron-deficient or chronic disease iron concentrations limited Ni²⁺ loading into Tf. Competitive binding kinetic studies were performed with Fe³⁺, Cr³⁺, and Ni²⁺ to determine percentages of metal ion uptake into Tf as a function of time. The initial rates of Fe³⁺ loading increased in the presence of nickel or chromium, with maximal Fe³⁺ loading into Tf in all cases reaching approximately 24%. Addition of Cr³⁺ to 50% preloaded Fe³⁺–Tf showed that excess chromium (15.0 μM) displaced roughly 13% of Fe³⁺ from Tf, resulting in 7.6 ± 1.3% Cr³⁺ loading of Tf. The PB/HC-OES method provides the ability to monitor multiple metal ions competing for Tf binding and will help to understand metal competition for Tf binding.     

Complexation- and ligand-induced metal release from 316L particles: importance of particle size and crystallographic structure

Iron, chromium, nickel, and manganese released from gas-atomized AISI 316L stainless steel powders (sized <45 and <4 μm) were investigated in artificial lysosomal fluid (ALF, pH 4.5) and in solutions of its individual inorganic and organic components to determine its most aggressive component, elucidate synergistic effects, and assess release mechanisms, in dependence of surface changes using atomic absorption spectroscopy, Raman, XPS, and voltammetry. Complexation is the main reason for metal release from 316L particles immersed in ALF. Iron was mainly released, while manganese was preferentially released as a consequence of the reduction of manganese oxide on the surface. These processes resulted in highly complexing media in a partial oxidation of trivalent chromium to hexavalent chromium on the surface. The extent of metal release was partially controlled by surface properties (e.g., availability of elements on the surface and structure of the outermost surface) and partially by the complexation capacity of the different metals with the complexing agents of the different media. In general, compared to the coarse powder (<45 μm), the fine (<4 μm) powder displayed significantly higher released amounts of metals per surface area, increased with increased solution complexation capacity, while less amounts of metals were released into non-complexing solutions. Due to the ferritic structure of lower solubility for nickel of the fine powder, more nickel was released into all solutions compared with the coarser powder.     

Tolerance and phytoaccumulation of Chromium by three Azolla species

Azolla, an aquatic fern is ideal candidate for exploitation in constructed wetlands for treating metal-contaminated wastewaters. This study demonstrates the potential of Azolla spp. namely A. microphylla, A. pinnata and A.␣filiculoides to tolerate Cr ions in the growth environment and bioconcentrate them. These species could grow in presence of up to 10 μg ml⁻¹ Cr and showed biomass production 30–70% as compared to controls. Nitrogenase activity was not affected at 1–5 μg ml⁻¹ but at higher concentrations it diminished. There was no growth at higher concentrations of chromium. However, the necrosed biomass harvested from treatments containing higher concentrations of chromium, accumulated Cr to the levels 5000–15,000 μg g⁻¹. At increased levels of Cr, the metal was accumulated in higher amount in dry biomass. Bioconcentration Factor (BCF) ranged between 243 and 4617 for the three species. A. microphylla showed highest bioconcentration potential. Thus, these Azolla spp. can be exploited for treatment of tannery and other Cr contaminated wastewaters.     

Metallic ion content and damage to the DNA in oral mucosa cells of children with fixed orthodontic appliances

Although the metal devices used in orthodontic treatments are manufactured highly resistance to corrosion, they may still suffer some localized corrosion resulting from the oral cavity conditions. The corrosion causes the release of metals from the alloys used for their manufacture. In this report, we evaluated the in vivo metal ions release of three alloys (stainless steel, titanium and nickel-free) usually used in the orthodontics treatments and its genotoxicity. We applied to 15 patients, between 12 and 16 years, 4 tubes and 20 brackets. Samples from oral mucosa were taken before the treatment and 30 days later. The concentration of the titanium, chromium, manganese, cobalt, nickel, molybdenum and iron were detected using inductively coupled plasma mass spectrometry (ICP-MS). The genotoxicity was measured with a comet assay (Olive moment). The oral mucosa cells in contact with the stainless steel alloy displayed the greatest titanium and manganese concentrations and those in contact with the nickel-free alloy presented the greatest concentration of chromium and iron. Both alloys, stainless steel and nickel-free, induced a higher DNA damage in the oral mucosa cells than the titanium alloy, in which the Olive moment was similar to controls. Based on the results of our study, we can conclude that titanium brackets and tubes are the most biocompatible of the three alloys.     

Trace metal concentrations in the tropical sponge Spheciospongia vagabunda at a sewage outfall: synchrotron X-ray imaging reveals the micron-scale distribution of accumulated metals

Major and trace elements were measured in sponges, seawater and sediment in Darwin Harbour (Australia) to test the hypothesis that metals are elevated in sponges closer to a sewage outfall compared with unimpacted sites. Seawater and sediment at the sewage discharge site contained high, but localised, concentrations of phosphorus (P), manganese (Mn), iron (Fe), cobalt (Co), nickel (Ni), copper (Cu), zinc (Zn), arsenic (As) and lead (Pb) compared with background sites. Metal concentrations in the sponge Spheciospongia vagabunda were highly elevated compared with other sponges and, although site specific, high metal concentrations were unrelated to the presence of sewage effluent. X-ray fluorescence microprobe imaging was used to investigate the metal distribution pattern in S. vagabunda. High Fe, Ni and Zn concentrations were either localised in circular patches (100–200 μm size) near water canals or in the pinacoderm, or scattered in spots (approximately 10 μm) throughout the tissue. This supports a microflora-mediated metal bioaccumulation hypothesis. In contrast, Co and Mn were highly dispersed and probably associated with aluminium- and iron-oxide rich sediment inclusions. Although the lack of association between sewage effluent and metal accumulation precludes the use of S. vagabunda as a biomonitor, the apparent differential mechanisms of metal accumulation warrants further investigation.     

Nickel hyperaccumulation as an anti-herbivore trait: considering the role of tolerance to damage

Metal hyperaccumulation is a striking trait exhibited by many plant species, but the evolutionary ecology of metal hyperaccumulation is poorly understood. It has been widely hypothesized that metal hyperaccumulation evolved to protect plants from herbivory. However, there is currently little evidence that metal hyperaccumulation enhances the fitness of plants in the presence of herbivory. In this study, we conducted a multi-factor greenhouse experiment to examine the effects of two soil nickel concentrations (unamended (0 μg/g) and nickel amended (600 μg/g)), and three levels of artificial damage (0, 10 and 50%) on the growth of plants from two populations of Thlaspi montanum var. montanum. We observed a significant interaction between soil nickel and artificial damage. An a posteriori analysis of this interaction revealed that the presence of nickel significantly improved the ability of T. montanum to tolerate the negative effects of intense damage. Our results indicate that metal hyperaccumulation could benefit T. montanum by increasing its tolerance to damage. This study suggests that there is a potential for the evolution of metal hyperaccumulation in response to intense herbivory on T. montanum.     

Analysis of Trace and Major Elements in Bronchoalveolar Lavage Fluid of Mycoplasma Bronchopneumonia in Calves

The aim of this study was to evaluate the reliability and effectiveness of direct determination of trace and major element concentrations in bronchoalveolar lavage fluid samples from Holstein calves with Mycoplasma bronchopneumonia (n = 21) and healthy controls (n = 20). The samples were obtained during bronchoscopy using a standard examination method. A total of 18 elements (aluminum, bromine, calcium, chlorine, chromium, copper, iron, potassium, magnesium, manganese, molybdenum, nickel, phosphorous, sulfur, silicon, strontium, titanium, and zinc) were detected by particle-induced X-ray emission. The average bromine, iron, potassium, magnesium, and phosphorous concentrations were higher in calves with bronchopneumonia than in controls (p < 0.05). They were found to have higher amounts of calcium and zinc, and a higher zinc–copper ratio than that in healthy calves (p < 0.001). Based on the receiver operating characteristics curves, we propose a diagnostic cutoff point for zinc–copper ratio for identification of Mycoplasma pneumonia of 8.676. Our results indicate that assessment of the elemental composition of broncholaveolar lavage fluid is a promising diagnostic tool for Mycoplasma bronchopneumonia.     

Trace Elements in Obese Turkish Children

The quality of the diet of obese children is poor. Eating habits may alter micronutrient status in obese patients. In this study, we determined the serum levels of selenium, zinc, vanadium, molybdenum, iron, copper, beryllium, boron, chromium, manganese, cobalt, silver, barium, aluminum, nickel, cadmium, mercury, and lead in obese Turkish children. Thirty-four obese and 33 healthy control subjects were enrolled in the study. Serum vanadium and cobalt levels of obese children were significantly lower than those of the control group (0.244 ± 0.0179 vs. 0.261 ± 0.012 μg/l, p < 0.001, and 0.14 ± 0.13 vs. 0.24 ± 0.15 μg/l, p = 0.011, respectively). There was no significant difference between groups regarding the other serum trace element levels. In conclusion, there may be alterations in the serum levels of trace elements in obese children and these alterations may have a role in the pathogenesis of obesity.     

Serum and liver zinc,copper, and iron in chicks infected withEimeria acervulina orEimeria tenella

Two-wk-old broiler chicks were inoculated via crop intubation withEimeria acervulina at two doses: 10⁵ or 10⁶ sporulated oocysts/bird or withEimeria tenella at a dose of 10⁵ sporulated oocysts/bird. Serum and liver samples were collected on days 3 and 6 post-inoculation (PI). There were no significant changes in serum or liver zinc, copper, and iron concentrations in any of the infected groups by 3 d PI. However, on d 6, PI serum protein was significantly reduced in all of the infected groups compared to their pair-fed controls. The chicks infected withE. tennella had significantly reduced serum zinc (1.20 vs 1.77 μg/mL) and iron (0.44 vs 1.28 μg/mL) concentrations and significantly elevated serum copper (0.28 vs 0.17 μg/mL) and ceruloplasmin levels (20.33 vs 11.11 μg/mL) compared to their pair-fed counterparts. Those chicks infected withE. acervulina (10⁶ oocysts/bird) exhibited significantly reduced serum iron concentration by 6 days PI (0.90 vs 1.14 μg/mL). Liver zinc was significantly increased in the chicks infected withE. tenella (349 vs 113 μg/g dry liver wt), as was copper (24 vs 19 μg/g), whereas liver iron concentration was significantly reduced (172 vs 243 μg/g) compared to pair-fed controls. At both dose levels, the chicks infected withE. acervulina exhibited a significant reduction in liver iron by 6 d PI. Hepatic cytosol metals generally reflected whole tissue levels. Metallothionein (MT)-bound zinc was significantly elevated in the chicks infected withE. tenella. Iron bound to a high molecular weight, heat-stable protein fraction (presumably cytoplasmic ferritin) was significantly reduced in chicks infected withE. acervulina, as well as those infected withE. tenella. Collectively, the changes in serum zinc, copper, and iron concentrations, as well as the changes in hepatic zinc and MT-zinc concentrations in the chicks infected withE. tenella were similar to changes evoked during an acute phase response to infection. It is possible that a secondary bacterial infection or inflammation stemming from erosion of the lining of the cecum may play a role in the response of trace element metabolism to theE. tenella infection. Mentions of a trademarkr, proprietary product or specific equipment does not consitute a guarantee or warranty by the US Department of Agriculture and does not imply its approval to the exclusion of other products.     

Inducible nickel resistance in a river isolate of India phylogenetically ascertained as a novel strain of Acinetobacter junii

Summary A gram negative, motile, short rod-shaped, and nickel resistant (tolerating 6.5 mM Ni²⁺) bacterium, strain BB1A, was isolated from the waters of the River Torsa in Hashimara, Jalpaiguri district, West Bengal, India. The isolate BB1A was identified as a strain of Acinetobacter junii following detailed analysis of morphological, physio-biochemical and 16S rRNA gene sequence. The expression of nickel resistance in BB1A was inducible by exposure to nickel chloride at a concentration as low as 50 μM Ni²⁺. The other metal ions, Cu²⁺, Zn²⁺, or Pb²⁺ at a concentration range of 20–30 μM, also induced the nickel resistance system in this bacterium. Southern hybridizations of BB1A genomic DNA with digoxigenin-dUTP labeled DNA probes specific for well known nickel resistance determinants, cnr, ncc or nre, resulted in no detectable signal, but nir specific probe yielded weak hybridization signal with restricted genomic DNA of BB1A. The isolate BB1A, therefore, carries out a novel induction phenomenon of nickel resistance and presumably with a nickel resistance genetic system different from that previously characterized in other bacteria.     

Determination of Trace Elements in Three Mushroom Samples of Basidiomycetes from Shandong,China

We have determined the trace element composition of three mushrooms of Basidiomycetes, used in traditional Chinese medicine using atomic absorption spectrophotometer (AAS). Metal concentrations in mushrooms were 203–401 mg/kg for iron, 22–51 mg/kg for manganese, 84–116 mg/kg for zinc, 24.1–41.3 mg/kg for copper, 1.6–5.6 mg/kg for lead, 3.3–4.4 mg/kg for chromium, 9.3–11.5 mg/kg for nickel, 0 mg/kg for vanadium, and 55.3–71 mg/kg for magnesium. The trace metal concentrations in mushrooms are hardly affected by the ecosystem and soil where they grew, as well as by the mushroom species and trace metal species. The results can be used to set new standards to control the quality of the three mushrooms of Basidiomycetes—Ganoderma lucidum, Coprinus comatus, and Grifola frondosa.     

Analyses of impact of metal ion contamination on carp (Cyprinus carpio L.) gill cell suspensions

The decline in fish population because of water contamination is problem. As a result of direct exposure in water, it has been readily accepted that the gills are the main site of water contamination and toxicity (e.g., metal ions). In the present study, we investigated metal ion contamination on the functional capacity of carp gill cells with antioxidant interactions in an in vitro study. The extent of cellular membrane damage, lipid peroxidation (LPO) (as TBARS levels), and glutathione (GSH) content were investigated after the addition of two metal ion compounds (viz., CuSO₄ and HgCl₂) in various concentrations (300, 500, 700, 1000, and 3000 μM) to gill cell preparation of the freshwater fish carp (Cyprinus carpio L.) with modulations by bovine serum albumin (BSA) (0.5% and 1.0%) and dimethyl sulfoxide (DMSO) (0.5%) as free-radical scavengers. The Comet assay technique was also performed for the highest concentrations of the two mentioned metal ions as an index of DNA breaks. The outcomes were as follows: (1) Copper and mercury increased the rate of LPO dose dependently (r=+0.995 and r=+0.993, respectively; p<0.001), but the GSH content was only marginally affected (r=−0.787 and r=−0.844, respectively; p<0.05). (2) Depletion of GSH molecules by copper had a wider range than mercury. (3) In the highest concentration of metal ions (3000 μM), both DMSO and 1.0% BSA showed a pro-oxidative potential to elevate the levels of TBARS (p<0.001), but for other concentrations when supplemented with three scavengers, a fall in the levels of the latter was found. (4) The addition of 1.0% BSA to medium containing 3000 μM of metal ions caused a significant decline in GSH content (p<0.01). (5) Copper and mercury could cause a high rate of DNA breaks (single stranded) in carp gill cell suspensions as a Comet appearance. These findings indicate that copper and mercury have a deleterious influence on membrane integrity and GSH content in a relatively dose-dependent manner. The complexes of metal ions and thiol (−SH) residues of cell proteins could also act as a potential cell toxicant leading to disturbances in cell functions causing cell death. DNA fragmentation is frequent in metal ion contamination.     

Trace metals in oral mucosa in relation to the lichen ruber planus pathology. A preliminary study carried out by neutron activation analysis

Lichen ruber planus, contact allergy and hypersensitivity can be linked to oral exposure to metals released from metal alloys commonly used in dentistry. In this context neutron activation analysis was developed for the microdetermination of 36 elements in oral mucosa biopsies of two patients affected by lichen ruber planus and of five subjects as control group.In order to minimise metal contamination during sample collection, biopsies were taken by laser bistoury technique and then submitted to radiochemical neutron activation analysis (RNAA).Among the metals analysed, chromium showed obvious high concentration in gingival biopsies of the two pathological subjects compared to the corresponding tissues of control group. Cobalt and nickel were also determined in higher concentrations, but only in one of the oral mucosa of the two patients.The present findings way support the hypothesis concerning a potential link of lichen ruber planus condition with the exposure to Cr, Co and Ni as released into oral cavity from prosthodontic alloys.     

Metal concentrations in certain coastal organisms from Beirut

Trace metal concentrations were determined in six species of intertidal organisms common to the coast of Ras Beirut, Lebanon. Lead, cadmium, nickel, iron, and zinc were highest in the polychaete,Hermodice carunculata, but the eggs of the sea urchin,Arbacia lixula, had similar iron levels and the sea anemone,Actinia equina, had zinc concentrations which also approached levels in the polychaete. The highest copper occurred in the shore crab,Pachygrapsus transversus, while chromium was highest in the eggs ofArbacia lixula.Cystoseira spinosa, the only alga studied, had average copper and iron concentrations similar to those found in the same species in another study. Together with the sea urchin eggs,C. spinosa exhibited the most variable zinc levels in the present investigation. The fish,Thalassoma pavo, which is rather common along the rocky coastal areas of Lebanon, appeared to have fairly high concentrations of certain elements in relation to levels reported in species of fish from other locations.Sewage, garbage, industrial and agricultural waste materials all enter the Mediterranean from Lebanon without prior treatment, which along with increased land erosion, probably contribute substantially to the availability of metals to the biota studied. It is suggested that more work on trace elements in coastal organisms from the eastern Mediterranean basin be undertaken before any conclusive statements are made. Such work should also investigate the various physiological and biochemical factors involved in metal uptake and retention by each species.     

Tracing the toxic ions of an endodontic tricalcium silicate-based sealer in local tissues and body organs

BackgroundThis study aimed to track the toxic ions released by MTA Fillapex, BioRoot RCS, and an experimental tricalcium silicate-based sealer (CEO) into local and distant tissues as well as to investigate their potential adverse effects. In addition, the chemical constituents of the sealers were also evaluated. The main components of the dry powders, pastes, and mixed sealers were characterized.Material and methodsDry powder and sealer discs were each set for 72 h and their main components were characterized by energy dispersive X-ray spectroscopy. Polyethylene tubes filled with sealers were used to measure silicon and calcium ions. Polyethylene tubes filled with sealers or empty tubes were implanted into the dorsal connective tissue of Wistar rats. On days 7, 15, 30, and 45, the animals were euthanized and their brains, livers, kidneys, and subcutaneous tissues were removed and processed to determine the concentrations of chromium, cobalt, copper, lead, iron, magnesium and nickel using an inductively coupled plasma optical emission spectrometer.ResultsThe main compounds in all sealers were carbon, oxygen, silicon, and calcium. MTA Fillapex release more Si while highest levels of Si were found in presence of BioRoot. The release of Si and Ca ions promoted by MTA Fillapex raise by time. No traces of cobalt, chromium, or magnesium were detected in any tissue. Irrespective of the sealer, no traces of copper and lead were found in the subcutaneous tissue; however, they were observed in the organs. The highest concentration of iron was identified in the liver. All sealers exhibited similar nickel traces in the brain, kidney, and liver except for MTA Fillapex, which demonstrated levels higher than CEO in the subcutaneous tissue on day 7. Tracing nickel ions over time revealed that lowest concentrations were found in subcutaneous tissue.ConclusionTaken together, our data demonstrate that CEOs have chemical compositions similar to those of other commercial sealers. Furthermore, none of them exhibited a threat to systemic health. Moreover, the minimal amounts of iron and nickel detected were not related to the sealers.     

Oxidative stress as a component of chromium-induced cytotoxicity in rat calvarial osteoblasts

It has been documented that medical prosthetic alloys release metal ions into surrounding tissues and cause cytotoxicity, but the mechanisms remain undefined. In that regard the cellular oxidative stress may be a common pathway in cellular responses to metal ions. The objective of this study was to approach the hypothesis that oxidative stress mediates chromium-induced cytotoxicity in rat calvarial osteoblasts. Osteoblasts were exposed to different concentrations of Cr⁶⁺ or Cr³⁺ (5–20 μM) in the presence or absence of the antioxidant N-acetyl-cysteine (NAC; 1–5 mM). Cellular viability, differentiation, and intracellular ultrastructural alterations were evaluated by MTT assay, alkaline phosphatase (ALP) activity assay, and transmission electron microscopy. Cellular oxidative stress was evaluated by intracellular reactive oxygen species (ROS) production. ROS production was monitored by the oxidation-sensitive fluorescent probe 2′7′-dichlorofluorescin diacetate (DCFH-DA). A time- and concentration- dependent increased cytotoxicity, time-dependent increased intracellular ROS production were indicated on exposure to Cr⁶⁺. Pretreatment of osteoblasts with 1–5 mM NAC afforded dose-dependent cytoprotective effects against Cr⁶⁺-induced cytotoxicity in osteoblasts. NAC decreased the level of intracellular ROS induced by Cr⁶⁺, too. While Cr³⁺ and NAC did not have any significant effects on osteoblasts (5–20 μM). These results suggest that oxidative stress is involved in Cr⁶⁺-induced cytotoxicity in osteoblasts, and NAC can provide protection for osteoblasts against Cr⁶⁺-induced oxidative stress. Cr³⁺ (5–20 μM) have no significant cytotoxicity in osteoblasts based on the results of this study.     

Amberlite IR-120 Modified with 8-Hydroxyquinoline as Efficient Adsorbent for Solid-Phase Extraction and Flame Atomic Absorption Determination of Trace Amounts of Some Metal Ions

In this study, a solid-phase extraction method combined with atomic absorption spectrometry for extraction, preconcentration, and determination of iron (Fe³⁺), copper (Cu²⁺), and lead (Pb²⁺) ions at trace levels in water samples has been reported. The influences of effective parameters such as flow rate, pH, eluent conditions (type, volume, and concentration), sample volumes, and interference of matrix ions on metal ions recoveries were studied. Under optimized conditions, the limits of detection were found in the range of 0.7–2.2 μg L⁻¹, while preconcentration factors for Fe³⁺, Cu²⁺, and Pb²⁺ ions were found to be 166, 200, and 250, respectively, and loading half time (t _1/2) values were less than 2 min for all analyte ions. The proposed procedure was applied for the determination of metal ions in different water samples with recovery of >94.4% and relative standard deviation less than 4.4% for N = 5.     

Zn biosorption by Rhizopus arrhizus and other fungi

Biosorption of zinc ions by inactivated fungal mycelia was studied. Of the six fungal species, Rhizopus arrhizus, Mucor racemosus, Mycotypha africana, Aspergillus nidulans, Aspergillus niger and Schizosaccharomyces pombe, R. arrhizus exhibited the highest capacity (Q ^max = 213 μmol g⁻¹ dry weight). Further experiments with different cellular fractions of R. arrhizus showed that Zn was predominantly bound to cell-wall chitin and chitosan (Q ^max = 312 μmol g⁻¹ dry weight). Adsorption data were best modelled by the Langmuir isotherm, although they can be modelled by the Freundlich equation as well at relatively low aqueous concentrations. Biosorption generally decreased with increase in biosorbent particle size and its concentration. Low pH reduced Zn sorption, because of the strong competition from hydrogen ions for binding sites on fungi. The presence of ligands reduced metal uptake, chiefly by forming metal complexes of a less biosorbable nature. Received: 2 November 1998 / Received revision: 12 January 1999 / Accepted: 17 January 1999     

Fluctuation in recoverable nickel and zinc resistant copiotrophic bacteria explained by the varying zinc ion content of Torsa River in different months

Heavy metal content analysis of River Torsa in India did not indicate any alarming level of toxicity for human consumption but revealed variation at the ppb level in different months. The variation in recoverable nickel and zinc resistant copiotrophic (or eutrophic) bacterial counts was explained by the variation of the zinc content (34.0–691.3 ppb) of the river water in different sampling months. Growth studies conducted with some purified nickel and/or zinc resistant strains revealed that pre-exposure of the cells to ppb levels of Zn²⁺, comparable to the indigenous zinc ion concentration of the river, could induce the nickel or zinc resistance. A minimum concentration of 5–10 μM Zn²⁺ (325–650 ppb) was found effective in inducing the Nickel resistance of the isolates. Zinc resistance of the isolates was tested by pre-exposing the cells to 4 μM Zn²⁺ (260 ppb). The lag phase was reduced by 6–8 h in all the cases. Biochemical characteristics and phylogenetic analysis based on 16S rDNA sequence indicated that some of the Torsa River isolates, having inducible nickel and zinc resistance, are members of the genus Pseudomonas, Acinetobacter, Bacillus, Enterobacter, Serratia and Moraxella.     

Uptake of heavy metals by <Emphasis Type="Italic">Stylonychia mytilus</Emphasis> and its possible use in decontamination of industrial wastewater

The heavy metal resistant ciliate, Stylonychia mytilus, isolated from industrial wastewater has been shown to be potential bioremediator of contaminated wastewater. The ciliate showed tolerance against Zn²⁺ (30 μg/mL), Hg²⁺ (16 μg/mL) and Ni²⁺ (16 μg/mL). The metal ions slowed down the growth of the ciliate as compared with the culture grown without metal stress. The reduction in cell population was 46% for Cd²⁺, 38% for Hg²⁺, 23% for Zn²⁺, 39% for Cu²⁺ and 51% for Ni²⁺ after 8 days of metal stress. S. mytilus reduced 91% of Cd²⁺, 90% of Hg²⁺ and 98% of Zn²⁺ from the medium after 96 h of incubation in a culture medium containing 10 μg/mL of the respective metal ions. Besides this, the ciliate could also remove 88% of Cu²⁺ and 73% Ni²⁺ from the medium containing 5 μg/mL of each metal after 96 h. The ability of Stylonychia to take up variety of heavy metals from the medium could be exploited for metal detoxification and environmental clean-up operations.