Stomach-specific drug delivery of 5-fluorouracil using floating alginate beads

A multiple-unit-type oral floating dosage form (FDF) of 5-fluorouracil (5-FU) was developed to prolong gastric residence time, target stomach cancer, and increase drug bioavailability. The floating bead formulations were prepared by dispersing 5-FU together with calcium carbonate into a mixture of sodium alginate and hydroxypropyl methylcellulose solution and then dripping the dispersion into an acidified solution of calcium chloride. Calcium alginate beads were formed, as alginate undergoes ionotropic gelation by calcium ions and carbon dioxide develops from the reaction of carbonate salts with acid. The evolving gas permeated through the alginate matrix, leaving gas bubbles or pores, which provided the beads buoyancy. The prepared beads were evaluated for percent drug loading, drug entrapment efficiency, image, surface topography, buoyancy, and in vitro release. The formulations were optimized for different weight ratios of gas-forming agent and sodium alginate. The beads containing higher amounts of calcium carbonate demonstrated instantaneous, complete, and excellent floating ability over a period of 24 hours. The optimized formulation was subjected to in vivo antitumor studies to check the therapeutic efficacy of the floating dosage forms containing 5-FU against benzo(a)pyrene-induced stomach tumors in albino female mice (Balb/C strain). The multiple-bead FDF was found to reduce the tumor incidence in mice by 74%, while the conventional tablet dosage form reduced this incidence by only 25%. Results indicate that FDF performed significantly better than the simple tablet dosage form. Published: June 22, 2007     

Statistical optimization of gastric floating system for oral controlled delivery of calcium

The development of an optimized gastric floating drug delivery system is described. Statistical experimental design and data analysis using response surface methodology is also illustrated. A central, composite Box-Wilson design for the controlled release of calcium was used with 3 formulation variables: X₁ (hydroxypropyl methylcellulose [HPMC] loading), X₂ (citric acid loading), and X₃ (magnesium stearate loading). Twenty formulations were prepared, and dissolution studies and floating kinetics were performed on these formulations. The dissolution data obtained were then fitted to the Power Law, and floating profiles were analyzed. Diffusion exponents obtained by Power Law were used as targeted response variables, and the constraints were placed on other response variables. All 3 formulation variables were found to be significant for the release properties (P<,05), while only HPMC loading was found to be significant for floating properties. Optimization of the formulations was achieved by applying the constrained optimization. The optimized formulation delivered calcium at the release rate of 40 mg/hr, with predicted n and T_50% values at 0.93 and 3.29 hours, respectively. Experimentally, calcium was observed to release from the optimized formulation with n and T_50% values of 0.89 (±0.10) and 3.20 (±0.21) hours, which showed an excellent agreement. The quadratic mathematical model developed could be used to further predict formulations with desirable release and floating properties.     

<Emphasis Type="Italic">In Vitro</Emphasis> Release Kinetics and Bioavailability of Gastroretentive Cinnarizine Hydrochloride Tablet

An oral sustained release dosage form of cinnarizine HCl (CNZ) based on gastric floating matrix tablets was studied. The release of CNZ from different floating matrix formulations containing four viscosity grades of hydroxypropyl methylcellulose, sodium alginate or polyethylene oxide, and gas-forming agent (sodium bicarbonate or calcium carbonate) was studied in simulated gastric fluid (pH 1.2). CNZ release data from the matrix tablets were analyzed kinetically using Higuchi, Peppas, Weibull, and Vergnaud models. From water uptake, matrix erosion studies, and drug release data, the overall release mechanism can be explained as a result of rapid hydration of polymer on the surface of the floating tablet and formation of a gel layer surrounding the matrix that controls water penetration into its center. On the basis of in vitro release data, batch HP1 (CNZ, HPMC-K100LV, SBC, LTS, and MgS) was subjected to bioavailability studies in rabbits and was compared with CNZ suspension. It was concluded that the greater bioavailability of HP1 was due to its longer retention in the gastric environment of the test animal. Batch no. HP1 of floating tablet in rabbits demonstrated that the floating tablet CNZ could be a 24-h sustained release formulation.     

Eudragit-coated pectin microspheres of 5-fluorouracil for colon targeting

An objective of the present investigation was to prepare and evaluate Eudragit-coated pectin microspheres for colon targeting of 5-fluorouracil (FU). Pectin microspheres were prepared by emulsion dehydration method using different ratios of FU and pectin (1:3 to 1:6), stirring speeds (500–2000 rpm) and emulsifier concentrations (0.75%–1.5% wt/vol). The yield of preparation and the encapsulation efficiencies were high for all pectin microspheres. Microspheres prepared by using drug:polymer ratio 1:4, stirring speed 1000 rpm, and 1.25% wt/vol concentration of emulsifying agent were selected as an optimized formulation. Eudragit-coating of pectin microspheres was performed by oil-in-oil solvent evaporation method using coat: core ratio (5:1). Pectin microspheres and Eudragit-coated pectin microspheres were evaluated for surface morphology, particle size and size distribution, swellability, percentage drug entrapment, and in vitro drug release in simulated gastrointestinal fluids (SGF). The in vitro drug release study of optimized formulation was also performed in simulated colonic fluid in the presence of 2% rat cecal content. Organ distribution study in albino rats was performed to establish the targeting potential of optimized formulation in the colon. The release profile of FU from Eudragit-coated pectin microspheres was pH dependent. In acidic medium, the release rate was much slower; however, the drug was released quickly at pH 7.4. It is concluded from the present investigation that Eudragit-coated pectin microspheres are promising controlled release carriers for colon-targeted delivery of FU. Published: February 16, 2007     

Multiunit Floating Drug Delivery System of Rosiglitazone Maleate: Development, Characterization, Statistical Optimization of Drug Release and In Vivo Evaluation

A multiunit floating drug delivery system of rosiglitazone maleate has been developed by encapsulating the drug into Eudragit® RS100 through nonaqueous emulsification/solvent evaporation method. The in vitro performances of microspheres were evaluated by yield (%), particle size analysis, drug entrapment efficiency, in vitro floating behavior, surface topography, drug–polymer compatibility, crystallinity of the drug in the microspheres, and drug release studies. In vitro release was optimized by a {3, 3} simplex lattice mixture design to achieve predetermined target release. The in vivo performance of the optimized formulation was evaluated in streptozotocin-induced diabetic rats. The results showed that floating microspheres could be successfully prepared with good yields (69–75%), high entrapment (78-97%), narrow size distribution, and desired target release with the help of statistical design of experiments from very small number of formulations. In vivo evaluation in albino rats suggested that floating microspheres of rosiglitazone could be a promising approach for better glycemic control.     

Enhanced Bioavailability of Atorvastatin Calcium from Stabilized Gastric Resident Formulation

Oral bioavailability of atorvastatin calcium (ATC) is very low (only 14%) due to instability and incomplete intestinal absorption and/or extensive gut wall extraction. When ATC is packed in the form of tablets, powders, etc., it gets destabilized as it is exposed to the oxidative environment, which is usually present during the production process, the storage of the substance, and the pharmaceutical formulation. Therefore, stabilized gastro-retentive floating tablets of ATC were prepared to enhance bioavailability. Water sorption and viscosity measurement studies are performed to get the best polymer matrix for gastro-retention. A 3² factorial design used to prepare optimized formulation of ATC. The selected excipients such as docusate sodium enhanced the stability and solubility of ATC in gastric media and tablet dosage form. The best formulation (F4) consisting of hypromellose, sodium bicarbonate, polyethylene oxide, docusate sodium, mannitol, crosscarmellose sodium, and magnesium stearate, gave floating lag time of 56 ± 4.16 s and good matrix integrity with in vitro dissolution of 98.2% in 12 h. After stability studies, no significant change was observed in stability, solubility, floating lag time, total floating duration, matrix integrity, and sustained drug release rates, as confirmed by DSC and powder X-ray diffraction studies. In vivo pharmacokinetic study performed in rabbits revealed enhanced bioavailability of F4 floating tablets, about 1.6 times compared with that of the conventional tablet (Storvas® 80 mg tablet). These results suggest that the gastric resident formulation is a promising approach for the oral delivery of ATC for improving bioavailability.Key words: atorvastatin calcium, bioavailibility, floating tablets, gastro-retention, stabilization     

Optimization and evaluation of gastroretentive ranitidine HCl microspheres by using design expert software

The current study involves the development and optimization of their drug entrapment and ex vivo bioadhesion of multiunit chitosan based floating system containing Ranitidine HCl by ionotropic gelation method for gastroretentive delivery. Chitosan being cationic, non-toxic, biocompatible, biodegradable and bioadhesive is frequently used as a material for drug delivery systems and used to transport a drug to an acidic environment where it enhances the transport of polar drugs across epithelial surfaces. The effect of various process variables like drug polymer ratio, concentration of sodium tripolyphosphate and stirring speed on various physiochemical properties like drug entrapment efficiency, particle size and bioadhesion was optimized using central composite design and analyzed using response surface methodology. The observed responses were coincided well with the predicted values given by the optimization technique. The optimized microspheres showed drug entrapment efficiency of 74.73%, particle size 707.26μm and bioadhesion 71.68% in simulated gastric fluid (pH 1.2) after 8h with floating lag time 40s. The average size of all the dried microspheres ranged from 608.24 to 720.80μm. The drug entrapment efficiency of microspheres ranged from 41.67% to 87.58% and bioadhesion ranged from 62% to 86%. Accelerated stability study was performed on optimized formulation as per ICH guidelines and no significant change was found in drug content on storage.     

Gastroretentive Matrix Tablets of Boswellia Oleogum Resin: Preparation,Optimization, <Emphasis Type="Italic">In Vitro</Emphasis> Evaluation,and Cytoprotective Effect on Indomethacin-Induced Gastric Ulcer in Rabbits

Currently available anti-ulcer drugs suffer from serious side effects which limited their uses and prompted the need to search for a safe and efficient new anti-ulcer agent. Boswellia gum resin (BR) emerged as a safe, efficient, natural, and economic potential cytoprotective agent. Thus, it is of medical importance to develop gastroretentive (GR) formulations of BR to enhance its bioavailability and anti-ulcer efficacy. Early attempts involved the use of organic solvents and non-applicability to large-scale production. In this study, different tablet formulations were prepared by simple direct compression combining floating and bioadhesion mechanisms employing hydroxypropyl methylcellulose (HPMC), sodium carboxymethyl cellulose (SCMC), pectin (PC), and/or carbopol (CP) as bioadhesive polymers and sodium bicarbonate (SB) as a gas former. The prepared tablets were subjected for assessment of swelling, floating, bioadhesion, and drug release in 0.1 N HCl. The optimized GR formulation was examined for its protective effect on the gastric ulcer induced by indomethacin in albino rabbits compared with lactose tablets. The obtained results disclosed that swelling, floating, bioadhesion, and drug release of the GR tablets of BR depend mainly on the nature of the matrix and the ratio of polymer combinations. Moreover, a combination of SCMC-CP in a ratio of 2:1 (SCP21) exhibited desirable floating, bioadhesion, swelling, and extended drug release. Also, a 6-h pretreatment with SCP21 tablets decreased the severity of inflammation and number of bleeding spots among ulcer-induced rabbits in comparison to those treated with lactose tablets.     

Controlled release of cyclosporin A from liposomes-in-microspheres as an oral delivery system

The aim of this study was to prepare cyclosporin A-loaded liposome (CyA-Lip) as an oral delivery carrier, with their encapsulation into microspheres based on alginate or extracellular polysaccharide (EPS) p-m 10356. The main advantage of liposomes in the microspheres (LIMs) is to improve the restricted drug release property from liposomes and their stability in the stomach environment. Alginate microspheres containing CyA-Lip were prepared with a spray nozzle; CyA-Liploaded EPS microspheres were also prepared using a w/o emulsion method. The shape of the LIMs was spherical and uniform, and the particle size of the alginate-LIMs ranged from 5 to 10 μm, and that of the EPS-LIMs was about 100 μm. In a release test, release rate of CyA in simulated intestinal fluid (SIF) from the LIMs was significantly enhanced compared to that in simulated gastric fluid (SGF). In addition, the CyA release rates were slower from formulations containing the liposomes compared to the microspheres without the liposome. Therefore, alginate-and EPS-LIMs have the potential for the controlled release of CyA and as an oral delivery system.     

多孔淀粉负载青蒿素微球的溶出、生物利用度和组织分布研究

探讨多孔淀粉负载青蒿素微球(ART-PS)在体外溶出实验中,相比于青蒿素原药的溶出效果以及在大鼠体内的生物利用度和组织分布规律。在体外溶出实验中,分别在水、人工胃液和人工肠液三种溶出介质中,与青蒿素原药的溶出效果进行比较分析。在体内生物利用度实验中,通过对18只大鼠分别灌胃青蒿素原药与多孔淀粉负载青蒿素微球后,检测不同时间点的血药浓度,考察药物在大鼠体内的吸收和代谢差异。在组织分布规律的研究中,对98只大鼠分别灌胃多孔淀粉负载青蒿素微球和青蒿素原药,在不同时间点检测大鼠心、肝、脾、肺、肾、脑,共6个组织器官中的药物浓度。多孔淀粉负载青蒿素微球的体外溶出率在水、人工胃液、人工肠液中分别是青蒿素原药的4.04、3.59和3.82倍。多孔淀粉负载青蒿素微球在大鼠体内的血药浓度明显高于青蒿素原药,生物利用度提高为青蒿素原药的2.90倍。在组织分布的结果中,多孔淀粉负载青蒿素微球和青蒿素原药都主要分布在心脏和肝脏中,其中多孔淀粉负载青蒿素微球在不同时间各个组织中的相应含量都比原药高。多孔淀粉负载青蒿素微球相比于青蒿素原药,在体外的溶出效果更好,在体内的吸收释放效果更佳,在各组织器官中的药物含量明显高于原药,为解决青蒿素因难溶于水而在实际应用中受限提供了重要的理论依据。     

Formulation and development of floating capsules of celecoxib: In vitro and in vivo evaluation

The objective of the present study was to develop a hydrodynamically balanced system for celecoxib as single-unit floating capsules. Various grades of low-density polymers were used for formulation of these capsules. The capsules were prepared by physical blending of celecoxib and the polymer in varying ratios. The formulation was optimized on the basis of in vitro buoyancy and in vitro release in citrate phosphate buffer pH 3.0 (with 1% sodium lauryl sulfate). Capsules prepared with polyethylene oxide 60K and Eudragit RL100 gave the best in vitro percentage release and were used as the optimized formulation. By fitting the data into zero-order, first-order, and Higuchi models, we concluded that the release followed zero-order kinetics, as the correlation coefficient (R value) was higher for zero-order release. For gamma scintigraphy studies, celecoxib was radiolabeled with technetium-99m by the stannous reduction method. To achieve the maximum labeling efficiency the process was optimized by studying the reaction at various pH conditions and stannous concentration levels. The radiolabeled complex was added to the optimized capsule, and dissolution studies were performed to ensure that there was no leaching of radioactivity from the capsules. Gamma imaging was performed in rabbits to assess the buoyancy of the optimized formulation. The optimized formulation remained buoyant during 5 hours of gamma scintigraphic studies in rabbits.     

Optimization and Evaluation of Gastroretentive Ranitidine HCl Microspheres by Using Factorial Design with Improved Bioavailability and Mucosal Integrity in Ulcer Model

The purpose of our investigation was to develop and optimize the drug entrapment efficiency and bioadhesion properties of mucoadhesive chitosan microspheres containing ranitidine HCl prepared by an ionotropic gelation method as a gastroretentive delivery system; thus, we improved their protective and therapeutic gastric effects in an ulcer model. A 3?×?2² full factorial design was adopted to study the effect of three different factors, i.e., the type of polymer at three levels (chitosan, chitosan/hydroxypropylmethylcellulose, and chitosan/methylcellulose), the type of solvent at two levels (acetic acid and lactic acid), and the type of chitosan at two levels (low molecular weight (LMW) and high molecular weight (HMW)). The studied responses were particle size, swelling index, drug entrapment efficiency, bioadhesion (as determined by wash-off and rinsing tests), and T _80% of drug release. Studies of the in vivo mucoadhesion and in vivo protective and healing effects of the optimized formula against gastric ulcers were carried out using albino rats (with induced gastric ulceration) and were compared to the effects of free ranitidine powder. A pharmacokinetic study in rabbits showed a significant, 2.1-fold increase in theAUC_0–24of the ranitidine microspheres compared to free ranitidine after oral administration. The optimized formula showed higher drug entrapment efficiency and mucoadhesion properties and had more protective and healing effects on induced gastric ulcers in rats than ranitidine powder. In conclusion, the prolonged gastrointestinal residence time and the stability of the mucoadhesive microspheres of ranitidine as well as the synergistic healing effect of chitosan could contribute to increasing the potential of its anti-gastric ulcer activity.     

Studies on Formulation Development of Mucoadhesive Sustained Release Itraconazole Tablet Using Response Surface Methodology

The purpose of this research was to prepare and evaluate sustained release mucoadhesive tablets of Itraconazole. It is practically insoluble in aqueous fluids hence its solid dispersion with Eudragit E100 was prepared by spray drying. This was formulated in matrix of hydrophilic mucoadhesive polymers Carbopol 934P (CP) and Methocel K4M (HPMC). The formulation was optimized using a 3² factorial design. Amounts of CP and HPMC were taken as formulation variables for optimizing response variables i.e. mucoadhesion and dissolution parameters. The optimized mucoadhesive formulation was orally administered to albino rabbits, and blood samples collected were used to determine pharmacokinetic parameters. The solid dispersion markedly enhanced the dissolution rate of itraconazole. The bioadhesive strength of formulation was found to vary linearly with increasing amount of both polymers. Formulations exhibited drug release fitting Peppas model with value of n ranging from 0.61 to 1.18. Optimum combination of polymers was arrived at which provided adequate bioadhesive strength and fairly regulated release profile. The experimental and predicted results for optimum formulations were found to be in close agreement. The formulation showed C _max 1898 ± 75.23 ng/ml, t _max of the formulation was 2 h and AUC was observed to be 28604.9 ng h/ml     

Development of Budesonide Microparticles Using Spray-Drying Technology for Pulmonary Administration: Design, Characterization, In Vitro Evaluation, and In Vivo Efficacy Study

The purpose of this research was to generate, characterize, and investigate the in vivo efficacy of budesonide (BUD) microparticles prepared by spray-drying technology with a potential application as carriers for pulmonary administration with sustained-release profile and improved respirable fraction. Microspheres and porous particles of chitosan (drug/chitosan, 1:2) were prepared by spray drying using optimized process parameters and were characterized for different physicochemical parameters. Mass median aerodynamic diameter and geometric standard deviation for conventional, microspheres, and porous particles formulations were 2.75, 4.60, and 4.30 μm and 2.56, 1.75, and 2.54, respectively. Pharmacokinetic study was performed in rats by intratracheal administration of either placebo or developed dry powder inhalation (DPI) formulation. Pharmacokinetic parameters were calculated (Ka, Ke, T _max, C _max, AUC, and Vd) and these results indicated that developed formulations extended half life compared to conventional formulation with onefold to fourfold improved local and systemic bioavailability. Estimates of relative bioavailability suggested that developed formulations have excellent lung deposition characteristics with extended T _1/2 from 9.4 to 14 h compared to conventional formulation. Anti-inflammatory activity of BUD and developed formulations was compared and found to be similar. Cytotoxicity was determined in A549 alveolar epithelial cell line and found to be not toxic. In vivo pulmonary deposition of developed conventional formulation was studied using gamma scintigraphy and results indicated potential in vitro–in vivo correlation in performance of conventional BUD DPI formulation. From the DPI formulation prepared with porous particles, the concentration of BUD increased fourfold in the lungs, indicating pulmonary targeting potential of developed formulations.     

Statistical Approach for Assessing the Influence of Calcium Silicate and HPMC on the Formulation of Novel Alfuzosin Hydrochloride Mucoadhesive-Floating Beads as Gastroretentive Drug Delivery Systems

Multiparticulate floating drug delivery systems have proven potential as controlled-release gastroretentive drug delivery systems that avoid the "all or none" gastric emptying nature of single-unit floating dosage forms. An objective of the presence investigation was to develop calcium silicate (CaSi)/calcium alginate (Ca-Alg)/hydroxypropyl methylcellulose (HPMC) mucoadhesive-floating beads that provide time- and site-specific drug release of alfuzosin hydrochloride (Alf). Beads were prepared by simultaneous internal and external gelation method utilizing 3(2) factorial design as an experimental design; with two main factors evaluated for their influence on the prepared beads; the concentration of CaSi as floating aid (X (1)) and the percentage of HPMC as viscosity enhancer and mucoadhesive polymer (X (2)), each of them was tested in three levels. Developed formulations were evaluated for yield, entrapment efficiency, particle size, surface topography, and buoyancy. Differential scanning calorimetry, Fourier transform infrared spectroscopy, in vitro drug release, as well as in vitro mucoadhesion using rat stomach mucosal membrane were also conducted. Percentage yield and entrapment efficiency ranged from 57.03% to 78.51% and from 49.78% to 83.26%, respectively. Statistical analysis using ANOVA proved that increasing the concentration of either CaSi or HPMC significantly increased the beads yield. Both CaSi and HPMC concentrations were found to significantly affect Alf release from the beads. Additionally, higher CaSi concentration significantly increased the beads diameter while HPMC concentration showed significant positive effect on the beads mucoadhesive properties. CaSi/Ca-Alg/HPMC beads represent simple floating-mucoadhesive gastroretentive system that could be useful in chronopharmacotherapy of benign prostatic hyperplasia.     

Wax-incorporated Emulsion Gel Beads of Calcium Pectinate for Intragastric Floating Drug Delivery

The purpose of this study was to prepare wax-incorporated pectin-based emulsion gel beads using a modified emulsion-gelation method. The waxes in pectin–olive oil mixtures containing a model drug, metronidazole, were hot-melted, homogenized and then extruded into calcium chloride solution. The beads formed were separated, washed with distilled water and dried for 12 h. The influence of various types and amounts of wax on floating and drug release behavior of emulsion gel beads of calcium pectinate was investigated. The drug-loaded gel beads were found to float on simulated gastric fluid if the sufficient amount of oil was used. Incorporation of wax into the emulsion gel beads affected the drug release. Water-soluble wax (i.e. polyethylene glycol) increased the drug release while other water-insoluble waxes (i.e. glyceryl monostearate, stearyl alcohol, carnauba wax, spermaceti wax and white wax) significantly retarded the drug release. Different waxes had a slight effect on the drug release. However, the increased amount of incorporated wax in the formulations significantly sustained the drug release while the beads remained floating. The results suggest that wax-incorporated emulsion gel beads could be used as a carrier for intragastric floating drug delivery.     

Influences of Sodium Carbonate on Physicochemical Properties of Lansoprazole in Designed Multiple Coating Pellets

Lansoprazole (LSP), a proton-pump inhibitor, belongs to class II drug. It is especially instable to heat, light, and acidic media, indicating that fabrication of a formulation stabilizing the drug is difficult. The addition of alkaline stabilizer is the most powerful method to protect the drug in solid formulations under detrimental environment. The purpose of the study was to characterize the designed multiple coating pellets of LSP containing an alkaline stabilizer (sodium carbonate) and assess the effect of the stabilizer on the physicochemical properties of the drug. The coated pellets were prepared by layer–layer film coating with a fluid-bed coater. In vitro release and acid-resistance studies were carried out in simulated gastric fluid and simulated intestinal fluid, respectively. Furthermore, the moisture-uptake test was performed to evaluate the influence of sodium carbonate on the drug stability. The results indicate that the drug exists in the amorphous state or small (nanometer size) particles without crystallization even after storage at 40°C/75% for 5 months. The addition of sodium carbonate to the pellet protects the drug from degradation in simulated gastric fluid in a dose-dependent manner. The moisture absorbed into the pellets has a detrimental effect on the drug stability. The extent of drug degradation is directly correlated with the content of moisture absorption. In conclusion, these results suggest that the presence of sodium carbonate influence the physicochemical properties of LSP, and the designed multiple coating pellets enhance the drug stability.     

Stereospecific determination of the in vitro dissolution of modified release formulations of (±)-verapamil

The determination of the in vitro dissolution profiles of three different modified-release formulations of (±)-verapamil were determined and compared to a reference (Calan SR). The determination of (±)-verapamil utilized a microwave-facilitated derivatization reaction with an enantiomerically pure reagent followed by measurement of drug by reversed-phase high-performance liquid chromatography (HPLC). The dissolution profile of each of the four modified-release formulations was followed for the first hour in simulated gastric fluid (pH 1.2) and then in simulated intestinal fluid (pH 7.5) for up to a total of 12 h. The resulting dissolution profiles of each modified-release formulation suggested that only one of the three test formulations had a similar dissolution to the Calan SR reference. Interestingly, the (S:R)-enantiomer ratios of two of the test products were significantly different from unity, and the third test product was also significantly different from unity if 4 out of 5 outliers were omitted. It is suggested that dissolution testing of modified-release formulations containing chiral active ingredients must be stereospecific in order to discern whether a drug-excipient interaction occurs. Additionally, it may be suggested that dissolution techniques relying more upon diffusion of medium through the tablet matrix, rather than erosion of the tablet, may accentuate enantiomeric differences in release rates. © 1993 Wiley-Liss, Inc.     

Development of cloxacillin loaded multiple-unit alginate-based floating system by emulsion-gelation method

This work investigates the development, optimization and in vitro evaluation of liquid paraffin-entrapped multiple-unit alginate-based floating system containing cloxacillin by emulsion-gelation method for gastro retentive delivery. The effect of process variables like drug to polymer ratio by weight, and liquid paraffin to water ratio by volume on various physicochemical properties in case of liquid paraffin-entrapped calcium alginate beads containing cloxacillin applicable to drug entrapment efficiency, density and drug release was optimized using 3² factorial design and analyzed using response surface methodology. The observed (actual values) responses were coincided well with the predicted values, given by the optimization technique. The optimized beads showed drug entrapment efficiency of 64.63 ± 0.78%, density of 0.90 ± 0.05 g/cm³, and drug release of 56.72 ± 0.85% in simulated gastric fluid (pH 1.2) after 8 h with floating lag time of 8.45 min and floated well over 12 h in simulated gastric fluid (pH 1.2). The average size of all dried beads ranged from 1.73 ± 0.04 to 1.97 ± 0.08 mm. The beads were characterized by SEM and FTIR for surface morphology and excipients-drug interaction analysis, respectively. All these beads showed prolonged sustained release of cloxacillin over 8 h in simulated gastric fluid (pH 1.2). The cloxacillin release profile from liquid paraffin beads followed Korsmeyer-Peppas model over a period of 8 h with anomalous (non-Fickian) diffusion mechanism for drug release.     

Mannosylated Niosomes as Adjuvant-Carrier System for Oral Mucosal Immunization

The aim of the present study was to develop mannosylated niosomes as oral vaccine delivery carrier and adjuvant for the induction of humoral, cellular, and mucosal immunity. Tetanus toxoid (TT) loaded niosomes composed of sorbiton monostearate (Span 60), cholesterol, and stearylamine were prepared by the reverse-phase evaporation method. They were coated with a modified polysaccharide o-palmitoyl mannan (OPM) to protect them from bile salts caused dissolution and enzymatic degradation in the gastrointestinal tract and to enhance their affinity toward the antigen presenting cells of Peyer's patches. Prepared niosomes were characterized in vitro for their size, shape, entrapment efficiency, ligand binding specificity, and stability in simulated gastric fluid and simulated intestinal fluid. OPM-coated niosomes were found to more stable in simulated gastrointestinal conditions. The immune stimulating activity was studied by measuring serum IgG titer, IgG2a/IgG1 ratio in serum, and sIgA levels in intestinal and salivary secretions following oral administration of niosomal formulations in albino rats. The results were compared with alum-adsorbed TT following oral and intramuscular administration, and it was observed that OPM-coated niosomes produced better IgG levels as compared to plain uncoated niosomes and alum-adsorbed TT upon oral administration. Oral niosomes also elicited a significant mucosal immune response (sIgA levels in mucosal secretions). The developed formulations also elicited a combined serum IgG2a/IgG1 response, suggesting that they were capable of eliciting both humoral and cellular response. The study signifies the potential of OPM-coated niosomes as an oral vaccine delivery carrier and adjuvant. The proposed system is simple, stable, and cost-effective and may be clinically acceptable.