Combining the hok/sok, parDE, and pnd postsegregational killer loci to enhance plasmid stability.

To enhance plasmid segregational stability in bacterial cells, two pairs of independent postsegregational killing loci (genes which induce host killing upon plasmid loss) isolated from plasmids R1, R483, or RP4 (hok+/sok+ pnd+ or hok+/sok+ parDE+) were cloned into a common site of the beta-galactosidase expression vector pMJR1750 (ptac::lacZ+) to form a series of plasmids in which the effect of one or two stability loci on segregational plasmid stability could be discerned. Adding two antisense killer loci (hok+/sok+ pnd+) decreased the specific growth rate by 50% though they were more effective at reducing segregational instability than hok+/sok+ alone. With the ptac promoter induced fully (2.0 mM isopropyl-beta-D-thiogalactopyranoside) and no antibiotic selection pressure, the combination of a proteic killer locus (parDE+) with antisense killer loci (hok+/sok+) had a negligible impact on specific growth rate, maintained high beta-galactosidase expression, and led to a 30 and 190% increase in segregational stability (based on stable generations) as compared to plasmids containing either hok+/sok+ or parDE+ alone, respectively. Use of hok+/sok+ or parDE+ alone with high cloned-gene expression led to ninefold and fourfold increases in the number of stable generations, respectively. Two convenient cloning cassettes have been constructed to facilitate cloning the dual hok+/sok+ parDE+ and hok+/sok+ pnd+ killer systems.     

Optimization of trichloroethylene degradation using soluble methane monooxygenase of Methylosinus trichosporium OB3b expressed in recombinant bacteria

By complementing cell-free extracts of Pseudomonas putida F1/pSMMO20 with purified soluble methane monooxygenase (sMMO) components of Methylosinus trichosporium OB3b, the low cloned-gene sMMO activity in the recombinant strain was found to be due to incomplete activity of the hydroxylase component. To address this incomplete activity, additional sMMO-expressing strains were formed by transferring mmo-containing pSMMO20 and pSMMO50 into various bacterial species including pseudomonads and alpha-2 subdivision strains such as methanotrophs, methylotrophs, Agrobacterium tumefaciens A114, and Rhizobium meliloti 102F34 (11 new strains screened); sMMO activity was detected in the last two strains. To increase plasmid segregational stability, the hok/sok locus originally from Escherichia coli plasmid R1 was inserted downstream of the mmo locus of pSMMO20 (resulting in pSMMO40) and found to enhance plasmid stability in P. putida F1 and R. meliloti 102F34 (first report of hok/sok in Rhizobium). To further increase sMMO activity, a modified Whittenbury minimal medium was selected from various minimal and complex media based on trichloroethylene (TCE) degradation and growth rates and was improved by removing the sMMO-inhibiting metal ions [Cu(II), Ni(II), and Zn(II)] and chloramphenicol from the medium and by supplementing with an iron source (3.6 muM of ferrous ammonium sulfate). Using chemostat-grown P. putida F1/pSMMO40, it was found that sMMO activity was higher for cells grown at higher dilution rates. These optimization efforts resulted in a twofold increase in the extent of TCE degradation and more consistent sMMO activity. (c) 1996 John Wiley & Sons, Inc.     

Exclusion of T4 phage by the hok/sok killer locus from plasmid R1.

The hok (host killing) and sok (suppressor of killing) genes (hok/sok) efficiently maintain the low-copy-number plasmid R1. To investigate whether the hok/sok locus evolved as a phage-exclusion mechanism, Escherichia coli cells that contain hok/sok on a pBR322-based plasmid were challenged with T1, T4, T5, T7, and lambda phage. Upon infection with T4, the optical density of cells containing hok/sok on a high-copy-number plasmid continued to increase whereas the optical density for those lacking hok/sok rapidly declined. The presence of hok/sok reduced the efficiency of plating of T4 by 42% and decreased the plaque size by approximately 85%. Single-step growth experiments demonstrated that hok/sok decreased the T4 burst size by 40%, increased the time to form mature phage (eclipse time) from 22 to 30 min, and increased the time to cell lysis (latent period) from 30 to 60 min. These results further suggest that single cells exhibit altruistic behavior.     

Translational control and differential RNA decay are key elements regulating postsegregational expression of the killer protein encoded by the parB locus of plasmid R1

The parB locus of plasmid R1, which mediates plasmid stability via postsegregational killing of plasmid-free cells, encodes two genes, hok and sok. The hok gene product is a potent cell-killing protein. The hok gene is regulated at the translational level by the sok gene-encoded repressor, a small anti-sense RNA complementary to the hok mRNA. The hok mRNA is extraordinarily stable, while the sok RNA decays rapidly. The mechanism of postsegregational killing is explained by the following model; the sok RNA molecule rapidly disappears in cells that have lost a parB-carrying plasmid, leading to translation of the stable hok mRNA. Consequently, the Hok protein is synthesized and killing of the plasmid-free cell follows.     

Mechanism of postsegregational killing by the hok gene product of the parB system of plasmid R1 and its homology with the relF gene product of the E. coli relB operon.

The parB region of plasmid R1 encodes two genes, hok and sok, which are required for the plasmid-stabilizing activity exerted by parB. The hok gene encodes a potent cell-killing factor, and it is regulated by the sok gene product such that cells losing a parB-carrying plasmid during cell division are rapidly killed. Coinciding with death of the host cell, a characteristic change in morphology is observed. Here we show that the killing factor encoded by the hok gene is a membrane-associated polypeptide of 52 amino acids. A gene located in the Escherichia coli relB operon, designated relF, is shown to be homologous to the hok gene. The relF gene codes for a polypeptide of 51 amino acids, which is 40% homologous to the hok gene product. Induced overexpression of the hok and relF gene products results in the same phenomena: loss of cell membrane potential, arrest of respiration, death of the host cell and change in cell morphology. The parB region and the relB genes were cloned into unstably inherited oriC minichromosomes. Whereas the parB region also conferred a high degree of genetic stability to an oriC minichromosome, the relB operon (with relF) did not; therefore the latter does not appear to 'stabilize' its replicon (the chromosome). The function of the relF gene is not known.     

Regulation of transcription of the Escherichia coli phosphoenolpyruvate carboxykinase locus: studies with pck-lacZ operon fusions

Mutants of Escherichia coli containing genetic fusions of lacZ to the pck (phosphoenolpyruvate carboxykinase) locus were isolated by using Mu d(lacZ Ampr) bacteriophage. Synthesis of beta-galactosidase in these strains is regulated by cyclic AMP and glucose (catabolite repression). Synthesis of beta-galactosidase by pck-lacZ fusions was induced in log-phase cells growing on gluconeogenic media, was repressed by glucose, and was also induced up to 100-fold at the onset of stationary phase in LB medium. This stationary-phase induction required cyclic AMP and some other unknown regulatory signal.     

Enhancement of cloned gene product synthesis via autoselection in recombinant Saccharomyces cerevisiae

Saccharomyces cerevisiae autoselection strains with mutations in the ura3, fur1, and urid-k genes have been obtained through a sequential isolation procedure. This autoselection system is an extension of one described by Loison et al. The mutations effectively block both the pyrimidine biosynthetic and salvage pathways and in combination are lethal to the host. Therefore, a plasmidencoded URA3 gene is essential for cell viability regardless of the growth conditions, and complex (traditionally nonselective) media can be employed without the risk of plasmid loss. The effects of medium enrichment on growth and cloned gene product synthesis were examined in batch culture for two autoselection strains. The plasmid gene product beta-galactosidase was under the control of the yeast GAL1 promoter, and two methods of induction were employed; one strain was induced via temperature shift while the other was induced by galactose addition. Three nutrient media were investigated: a lean selective medium (SD), a richer semidefined medium (SDC), and a rich complex medium (YPD). The results demonstrated the improvements in cloned gene productivity possible when the growth medium is enriched, with up to 10-fold increases in beta-galactosidase productivity observed. Plasmid instability and mutation reversion were not problems for the autoselection strains, even in uracil-containing medium. Short-term plasmid stabilities were approximately 90% in all three media tested. During continuous culture of the autoselection temperature-sensitive strain, long-term plasmid stability was excellent and beta-galactosidase expression remained high after more than 25 residence times under inducing conditions. In contrast, both beta-galactosidase specific activity and plasmid stability decreased linearly with time for an analogous nonautoselection strain. The introduced fur1 and uridk mutations were very stable; after more than 50 generations of growth in complex medium, stability values of 99-100% were measured. (c) 1993 Wiley & Sons, Inc.     

Study of stability of recombinant plasmids during the continuous culture of Bacillus stearothermophilus NUB3621 in nonselective medium

The optimal culture conditions for Bacillus stearothermophilus NUB3621 (BGSC 9A5) in chemostat were studied. The results obtained showed that the optimal culture conditions in terms of biomass concentration and maximum growth rate were 65 degrees C, pH 6.8 to 7.2. Dissolved oxygen became growth limiting at pO(2) levels below 10%. Furthermore, this strain was transformed with three new hybrid vectors (pPAM2, pPCH2, or pPLY2) constructed by cloning in pRP9, a plasmid based on the thermophilic replicon, pBC1, and three heterologous genes: the alpha-amylase gene from Bacillus licheniformis, the cholesterol oxidase gene from Streptomyces sp., and the lipase gene from Pseudomonas fluorescens. The influence of several fermentative conditions on segregational and structural stability of the recombinant B. stearothermophilus NUB3621 transformants was studied.The parameters of plasmid loss, that is, rate of plasmid loss (R) and specific growth rate difference (deltamu), were calculated. B. stearothermophilus NUB3621 carrying pRP9 showed great segregational stability in all the assayed conditions, exceeding more than 300 generations without significant plasmid loss, whereas NUB3621 carrying pPAM2, pPCH2, or pPLY2 exhibited relatively low plasmid stability. The segregational instability of the recombinant constructs increased by increasing the fermentation temperature, decreased by increasing the dilution rate, and was not affected by the level of dissolved oxygen. On the other hand, plasmid maintenance decreased in minimal medium if compared with the results obtained in complex medium. Restriction analyses carried out on cultures of NUB3621 carrying pRP9, pPAM2, pPCH2, or pPLY2, grown for 200 generations on nonselective media, revealed that all the clones tested contained the parental plasmids. These results indicate that the heterologous inserts did not affect the structural stability of the recombinant plasmids. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 53: 507-514, 1997.     

Effect of medium composition on the maintenance of a recombinant plasmid in Bacillus subtilis.

Recombinant plasmid pCED3 [confers beta-galactosidase production (LacZ+) and kanamycin resistance (Kmr)] in Bacillus subtilis was found to be both segregationally and structurally unstable. Since many solutions to segregational instability are already available, the problem of structural instability was specifically addressed by inclusion of kanamycin in the growth media. Culture instability was found to be highest in complex and defined media supporting high growth rates. Stabilization over the duration of the experiment (40 generations) was achieved by use of a recently developed chemically defined medium supporting a lower growth rate. Slowing down growth by decreasing temperature was much less effective. A major effect of the growth medium appears to be that of decreasing the growth rate advantage held by cells with plasmid deletions over parental cells containing the intact plasmid.     

L-天冬酰胺酶工程菌株培养条件及稳定性

L-天冬酰胺酶工程菌株的酶活和表达水平受菌体生物量和诱导时间的影响。在生物量Ａ６００03×１０左右,热诱导4h酶活力和表达水平可达到较高水平。葡萄糖对酶的生成有阻遏作用,当葡萄糖浓度大于025%时,对工程菌酶的合成造成阻遏。确定了工程菌培养的培养基、pH值、接种量等因素。重组质粒pASN在\%E.coli\% JM105,TG1和AS1357等宿主菌中具有很好的稳定性,工程菌培养50代以上重组质粒保留90%以上,在LB和M\|3培养基中也较稳定。     

Antimicrobial properties of the Escherichia coli R1 plasmid host killing peptide

The 52 amino acid host killing peptide (Hok) from the hok/sok post-segregational killer system of the Escherichia coli plasmid R1 was synthesized using Fmoc (9-fluorenylmethoxycarbonyl) chemistry, and its molecular weight was confirmed by mass spectroscopy. Hok kills cells by depolarizing the cytoplasmic membrane when it is made in the cytosol. Six microorganisms, E. coli, Bacillus subtilis, Pseudomonas aeruginosa, P. putida, Salmonella typhimurium, and Staphylococcus aureus were exposed to the purified peptide but showed no significant killing. However, electroporation of Hok (200 microgml(-1)) into E. coli cells showed a dramatic reduction (100000-fold) in the number of cells transformed with plasmid DNA which indicates that the synthetic Hok peptide killed cells. Electroporation of Hok into P. putida was also very effective with a 500-fold reduction in electrocompetent cells (100 microgml(-1)). Heat shock in the presence of Hok (380 microgml(-1)) resulted in a 5-fold reduction in E. coli cells but had no effect on B. subtilis. In addition, three Hok fragments (Hok(1-28), Hok(31-52) and Hok(16-52)) killed cells when electroporated into E. coli at 200 microgml(-1) (over 1000-fold killing for Hok(1-28), 50-fold killing for Hok(16-52) and over 1000-fold killing for Hok(31-52)). E. coli cells electroporated with Hok and visualized using transmission electron microscopy showed the same morphological changes as control cells to which Hok was induced using a plasmid inside the cell.     

Model suicide vector for containment of genetically engineered microorganisms.

A model suicide vector (pBAP19h), designed for the potential containment of genetically engineered microorganisms, was made by constructing a plasmid with the hok gene, which codes for a lethal polypeptide, under the control of the lac promoter. The vector plasmid also codes for carbenicillin resistance. In the absence of carbenicillin, induction of the hok gene in vitro caused elimination of all detectable cells containing the suicide vector; pBAP19h-free cells of the culture survived and grew exponentially. In the presence of carbenicillin, however, the number of cells containing pBAP19h initially declined after induction of hok but then multiplied exponentially. The surviving cells still had a fully functional hok gene and had apparently developed resistance to the action of the Hok polypeptide. Thus, high selective pressure against the loss of the suicide vector led to a failure of the system. Soil microcosm experiments confirmed the ability of a suicide vector to restrict the growth of a genetically engineered microorganism in the absence of selective pressure against the loss of the plasmid, with 90 to 99% elimination of hok-bearing cells within 24 h of hok induction. However, some pBAP19h-bearing cells survived in the soil microcosms after hok induction. The surviving cells contained an active hok gene but were not capable of normal growth even after elimination of the hok gene; it appears that a mutation that made them Hok resistant also reduced their capacity for membrane functions needed for energy generation and exponential cell growth. Thus, the model suicide vector was shown to be functional in soil as well as in vitro.(ABSTRACT TRUNCATED AT 250 WORDS)     

Model suicide vector for containment of genetically engineered microorganisms

A model suicide vector (pBAP19h), designed for the potential containment of genetically engineered microorganisms, was made by constructing a plasmid with the hok gene, which codes for a lethal polypeptide, under the control of the lac promoter. The vector plasmid also codes for carbenicillin resistance. In the absence of carbenicillin, induction of the hok gene in vitro caused elimination of all detectable cells containing the suicide vector; pBAP19h-free cells of the culture survived and grew exponentially. In the presence of carbenicillin, however, the number of cells containing pBAP19h initially declined after induction of hok but then multiplied exponentially. The surviving cells still had a fully functional hok gene and had apparently developed resistance to the action of the Hok polypeptide. Thus, high selective pressure against the loss of the suicide vector led to a failure of the system. Soil microcosm experiments confirmed the ability of a suicide vector to restrict the growth of a genetically engineered microorganism in the absence of selective pressure against the loss of the plasmid, with 90 to 99% elimination of hok-bearing cells within 24 h of hok induction. However, some pBAP19h-bearing cells survived in the soil microcosms after hok induction. The surviving cells contained an active hok gene but were not capable of normal growth even after elimination of the hok gene; it appears that a mutation that made them Hok resistant also reduced their capacity for membrane functions needed for energy generation and exponential cell growth. Thus, the model suicide vector was shown to be functional in soil as well as in vitro.(ABSTRACT TRUNCATED AT 250 WORDS)