Purification and DNA binding properties of the blaI gene product, repressor for the beta-lactamase gene, blaP, of Bacillus licheniformis.

The location of the repressor gene, blaI, for the beta-lactamase gene blaP of Bacillus licheniformis 749, on the 5' side of blaP, was confirmed by sequencing the bla region of the constitutive mutant 749/C. An amber stop codon, likely to result in a nonfunctional truncated repressor, was found at codon 32 of the 128 codon blaI open reading frame (ORF) located 5' to blaP. In order to study the DNA binding activity of the repressor, the structural gene for blaI, from strain 749, with its ribosome binding site was expressed using a two plasmid T7 RNA polymerase/promotor system (S. Tabor and C. C. Richardson. Proc. Natl. Acad. Sci. 82, 1074-1078 (1985). Heat induction of this system in Escherichia coli K38 resulted in the production of BlaI as 5-10% of the soluble cell protein. Repressor protein was then purified by ammonium sulfate fractionation and cation exchange chromatography. The sequence of the N-terminal 28 amino acid residues was determined and was as predicted from the DNA. Binding of BlaI to DNA was detected by the slower migration of protein DNA complexes during polyacrylamide gel electrophoresis. BlaI was shown to selectively bind DNA fragments carrying the promoter regions of blaI and blaP.     

The fate of the BlaI repressor during the induction of the Bacillus licheniformis BlaP beta-lactamase

The induction of the Staphylococcus aureus BlaZ and Bacillus licheniformis 749/I BlaP beta-lactamases by beta-lactam antibiotics occurs according to similar processes. In both bacteria, the products of the blaI and blaRl genes share a high degree of sequence homology and act as repressors and penicillin-sensory transducers respectively. It has been shown in S. aureus that the BlaI repressor, which controls the expression of BlaZ negatively, is degraded after the addition of the inducer. In the present study,we followed the fate of BlaI during beta-lactamase induction in B. licheniformis 749/I and in a recombinant Bacillus subtilis 168 strain harbouring the pDML995 plasmid, which carries the B. licheniformis blaP, blaI and blaRl genes. In contrast to the situation in B. licheniformis 749/I, beta-lactamase induction in B.subtilis 168/pDML995 was not correlated with the proteolysis of BlaI. To exclude molecular variations undetectable by SDS-PAGE, two-dimensional gel electrophoresis was performed with cellular extracts from uninduced or induced B. subtilis 168/pDML995cells. No variation in the Blal isoelectric point was observed in induced cells, whereas the DNA-binding property was lost. Cross-linking experiments with dithiobis(succimidylpropionate) confirmed that, in uninduced recombinant B. subtilis cells, BlaI was present as a homodimer and that this situation was not altered in induced conditions. This latter result is incompatible with a mechanism of inactivation of BlaI by proteolysis and suggests that the inactivation of BlaI results from a non-covalent modification by a co-activator and that the subsequent proteolysis of BlaI might be a secondary phenomenon. In addition to the presence of this co-activator, our results show that the presence of penicillin stress is also required for full induction of beta-lactamase biosynthesis.     

New integrative method to generate Bacillus subtilis recombinant strains free of selection markers

The novel method described in this paper combines the use of blaI, which encodes a repressor involved in Bacillus licheniformis BlaP beta-lactamase regulation, an antibiotic resistance gene, and a B. subtilis strain (BS1541) that is conditionally auxotrophic for lysine. We constructed a BlaI cassette containing blaI and the spectinomycin resistance genes and two short direct repeat DNA sequences, one at each extremity of the cassette. The BS1541 strain was obtained by replacing the B. subtilis P(lysA) promoter with that of the P(blaP) beta-lactamase promoter. In the resulting strain, the cloning of the blaI repressor gene confers lysine auxotrophy to BS1541. After integration of the BlaI cassette into the chromosome of a conditionally lys-auxotrophic (BS1541) strain by homologous recombination and positive selection for spectinomycin resistance, the eviction of the BlaI cassette was achieved by single crossover between the two short direct repeat sequences. This strategy was successfully used to inactivate a single gene and to introduce a gene of interest in the Bacillus chromosome. In both cases the resulting strains are free of selection marker. This allows the use of the BlaI cassette to repeatedly further modify the Bacillus chromosome.     

Bioprocess parameters and oxygen transfer characteristics in beta-lactamase production by Bacillus species

After screening potential beta-lactamase producers in a medium containing penicillin G, an inducible (Bacillus subtilis NRS 1125) and a constitutive (Bacillus licheniformis 749/C ATCC 25972) beta-lactamase producer were selected. As the highest enzyme activity was obtained with B. licheniformis 749/C, the effects of the concentration of carbon sources, i.e., glucose, fructose, sucrose, citric acid, and glycerol, and nitrogen sources, i.e., (NH(4))(2)HPO(4), NH(4)Cl, yeast extract, casamino acids and peptone, pH, and temperature on beta-lactamase production were investigated with B. licheniformis 749/C in laboratory scale bioreactors. Among the investigated media, the highest volumetric activity was obtained as 270 U cm(-)(3) in the medium containing 10.0 kg m(-)(3) glucose, 1.18 kg m(-)(3) (NH(4))(2)HPO(4), 8.0 kg m(-)(3) yeast extract, and the salt solution at 32 degrees C and pH(0) = 6.0. By using the designed medium, fermentation and oxygen transfer characteristics of the bioprocess were investigated at V = 3.0 dm(3) bioreactor systems with a V(R) = 1.65 dm(3) working volume at Q(O)/V(R) = 0.5 vvm and N = 500 min(-1). At the beginning of the process the Damk?hler number was <1, indicating that the process was at biochemical reaction limited condition; at t = 2-5 h both mass-transfer and biochemical reaction resistances were effective; and at t = 6-10 h (Da >1) the bioprocess was at mass transfer limited condition. Overall oxygen transfer coefficients (K(L)a) varied between 0.01 and 0.03 s(-)(1), enhancement factor (K(L)a/K(L)a(O)) varied between 1.2 and 2.3, and volumetric oxygen uptake rate varied between 0.001 and 0.003 mol m(-)(3) s(-)(1) throughout the bioprocess. The specific oxygen uptake and the specific substrate consumption rates were the highest at t = 2 h and then decreased with the cultivation. The maximum yield of cells on substrate and the maximum yield of cells on oxygen values were obtained, respectively, as Y(X/S) = 0.34 and Y(X/O) = 1.40, at t = 5 h, whereas the highest yield of substrate on oxygen was obtained as Y(S/O) = 6.94 at t = 3.5 h. The rate of oxygen consumption for maintenance and the rate of substrate consumption for maintenance values were found, respectively, as m(O) = 0.13 kg kg(-)(1) h(-)(1) and m(S) = 3.02 kg kg(-)(1) h(-)(1).     

A second regulatory gene, blaR1, encoding a potential penicillin-binding protein required for induction of beta-lactamase in Bacillus licheniformis.

A second regulatory locus (blaR1) required for the induction of beta-lactamase synthesis in Bacillus licheniformis 749 was cloned and sequenced. The gene was located on a 5.2-kilobase-pair SphI DNA fragment which also contained the beta-lactamase (blaP) and repressor (blaI) genes. Bacillus subtilis BD224 carrying these three genes synthesized beta-lactamase on exposure to cephalosporin C, whereas Escherichia coli HB101 carrying the genes did not show any detectable induction of the enzyme. An open reading frame of 1,803 bases was identified as the blaR1 gene by subcloning and DNA sequencing. The gene started 2 bases downstream of the termination codon of bla1 and was preceded by a putative Shine-Dalgarno sequence (AAGGA) with a spacing of 5 bases. The deduced blaR1 product (601 amino acids) had a molecular weight of 68,425. Five transmembrane regions were predicted from the hydrophobicity profile. The region around Phe-Ala-Pro-Ala-Ser-Thr-Tyr-Lys (amino acids 398 to 405), which appeared to be located outside the membrane, was homologous to the binding regions of penicillin-binding proteins, including the beta-lactamases. The segment of 22 amino acids from 400 to 421 showed more than 70% homology to the penicillin-binding region of PBP 2 of E. coli. The blaR1 gene encodes a potential penicillin receptor which is required for the induction of beta-lactamase in B. licheniformis 749.     

Penicillinase (β-Lactamase) Induction in Bacillus licheniformis Under Pseudogratuitous Conditions by 2-(2′-Carboxyphenyl)-Benzoyl-6-Aminopenicillanic Acid

Induction of penicillinase (beta-lactamase) in Bacillus licheniformis 749 by 2-(2'-carboxyphenyl)-benzoyl-6-aminopenicillanic acid (CBAP) was examined, since this compound was reported to be a gratuitous inducer of penicillinase in Staphylococcus aureus. The specific activity of enzyme optimally induced by CBAP is slightly more than that formed in response to cephalosporin C and threefold the level induced by benzylpenicillin. The optimal inducer concentration of CBAP was not inhibitory toward the growth of penicillinase-deficient mutants, unlike benzylpenicillin or cephalosporin C which showed marked toxicities. CBAP is hydrolyzed by the Bacillus penicillinase, but as indicated by its "physiological efficiency" (V(max)/K(m)), CBAP is a poor substrate at low concentrations. At very high concentrations, CBAP inhibited benzylpenicillin hydrolysis. The overall effectiveness of CBAP as an inducer can be attributed to its low "physiological efficiency" which enables the use of nontoxic levels of CBAP for induction without its rapid hydrolysis. Although CBAP is not a true gratuitous inducer, operationally it approaches gratuity for induction of B. licheniformis penicillinase better than other known inducers.     

An immunoenzyme method of isolation of foot-and-mouth disease virus by using beta-lactamase conjugate with virus-specific antibodies

It was shown that in was feasible to use conjugates of virus-specific antibodies and beta-lactamase from Bacillus licheniformis 749/c to identify aphthosa virus antigens. The antigen titers determined by enzyme immunoassay (EIA) using a beta-lactamase conjugate were 5-64 times higher than the analogous indices of the complement fixation test. Unlike EIA, that by using the antibody conjugates with peroxidase or alkaline phosphatase there were observed no "background" responses.     

Determination of the O antigen of Shigella sonnei by a competitive immunoenzyme method

A technique for immunoenzymatic diagnosis of dysentery by Shigella sonnei O-antigen was developed. For induction of antibodies to O-antigen rabbits were immunized by intravenous administration of a commercial antidysentery vaccine. Specific antibodies to O-antigen belonging to class G immunoglobulins and not binding to O-antigens of Sh. flexneri and Salmonella typhimurium were obtained. beta-Lactamase of Bacillus licheniformis 749/c was used as a marker enzyme in the immunoenzymatic assay. To increase the sensitivity, beta-lactamase molecules were preliminarily linked with glutaric aldehyde into oligomers. Conjugates of Sh. sonnei O-antigen with the oligomers of B. licheniformis 749/c beta-lactamase were prepared with the periodate method by oxidizing O-antigen. The conjugate was used in competing solid phase immunoenzymatic assay for determination of Sh. sonnei O-antigen in blood serum of patients with dysentery. The sensitivity of the assay is 0.5-1 ng per 1 ml of O-antigen.     

Molecular cloning and expression of Bacillus licheniformis beta-lactamase gene in Escherichia coli and Bacillus subtilis.

The chromosomal beta-lactamase (penicillinase, penP) gene from Bacillus licheniformis 749/C has been cloned in Escherichia coli. The locations of the target sites for various restriction enzymes on the 4.2-kilobase EcoRI fragment were determined. By matching the restriction mapping data with the potential nucleotide sequences of the penP gene deduced from known protein sequence, we established the exact position of the penP gene on the fragment. A bifunctional plasmid vector carrying the penP gene, plasmid pOG2165, was constructed which directs the synthesis of the heterologous beta-lactamase in both E. coli and Bacillus subtilis hosts. The protein synthesized in E. coli and B. subtilis is similar in size to the processed beta-lactamase made in B. licheniformis. Furthermore, the beta-lactamase made in B. subtilis is efficiently secreted by the host into the culture medium, indicating that B. subtilis is capable of carrying out the post-translational proteolytic cleavage(s) to convert the membrane-bound precursor enzyme into the soluble extracellular form.     

Beta-lactamase III of Bacillus cereus 569: membrane lipoprotein and secreted protein

A third beta-lactamase in Bacillus cereus 569 has been identified and characterized. It corresponds to gamma-penicillinase reported by Pollock [Pollock, M. R. (1956) J. Gen. Microbiol. 15, 154-169] but whose existence has been questioned since then. It will be called beta-lactamase III. It resembles the class A beta-lactamases but is immunologically distinct from the major class A secreted beta-lactamase I of B. cereus. As with several other Gram-positive beta-lactamases it occurs in two forms, membrane bound as a glyceride-cysteine lipoprotein and as a hydrophilic secreted protein formed by cleavage on the carboxyl side of the modified cysteine that is the membrane attachment site. It is produced in all B. cereus 569 strains tested but is absent in B. cereus 5/b. Antibody to beta-lactamase III interacts to varying degrees with all the known class A beta-lactamases, most strongly with that of B. licheniformis 749/C.     

Inhibition of beta-lactamase of Bacillus licheniformis 749/C by compound PS-5, a new beta-lactam antibiotic.

By use of a new computer-assisted u.v.-spectrophotometric assay method, the kinetic parameters of the reaction catalysed by Bacillus licheniformis 749/C beta-lactamase were re-examined and the mode of inhibition of the enzyme by compound PS-5, a novel beta-lactam antibiotic, was studied with benzylpenicillin as substrate. (1) The fundamental assay conditions for the determination of Km and V were examined in detail with benzylpenicillin as substrate. In 0.1 M-sodium/potassium phosphate buffer, pH 6.8, at 30 degrees C, initial substrate concentrations of benzylpenicillin above 0.7 mM were very likely to lead to substrate inhibition. The Km value of the enzyme for benzylpenicillin at initial concentrations from 1.96 to 0.07 mM was calculated to be 97-108 microM. (2) The Km values of the enzyme for 6-aminopenicillanic acid, ampicillin and cephaloridine were found to be 25, 154-161 and 144-161 microM respectively. (3) Compound PS-5 was virtually unattacked by Bacillus licheniformis 749/C beta-lactamase. (4) The activity of the enzyme was diminished by compound PS-5, to extents depending on the duration of incubation and the concentration of the inhibitor. The rate of inactivation of the enzyme by compound PS-5 followed first-order kinetics. (5) In an Appendix, a new computer-assisted u.v.-spectrophotometric enzyme assay method, in which a single reaction progress curve of time-absorbance was analysed by the integrated Michaelis-Menten equation, was devised for the accurate and precise determination of the kinetic constants of beta-lactamase. For conversion of absorbance readings into molar substrate concentrations, the initial or final absorbance reading that was independent of the reaction time was used as the basis of calculation. In calculation of Km and V three systematic methods of data combination were employed for finer analysis of the reaction progress curve. A list of the computer program named YF6TAIM is obtainable from the author on request or as Supplementary Publication SUP 50100 (12 pages) from the British Library Lending Division, Boston Spa, Wetherby, West Yorkshire LS23 7BQ, U.K., on the terms indicated in Biochem. J. (1978) 169, 5.     

Interaction of different oligomeric states of hexameric DNA-helicase RepA with single-stranded DNA studied by analytical ultracentrifugation

Analytical ultracentrifugation was used to determine the molecular mass, M, of hexameric DNA-helicase RepA at pH 5.8 and 7.6. At pH 7.6, a molecular mass of 179.5+/-2.6 kDa was found, consistent with the known hexameric state of RepA, (RepA)(6). At pH 5.8, (RepA)(6) associates to form a dimer with a molecular mass of 366.2+/-4.1 kDa. Analytical ultracentrifugation was also applied to characterize the interaction of single-stranded DNA (ssDNA) with the two different oligomeric states of (RepA)(6) at pH 5.8 and 7.6. The dissociation constants, K(d), for the equilibrium binding of (dA)(30) to the (RepA)(6) dimer at pH 5.8 and to (RepA)(6) at pH 7.6 were determined at 10 degrees C in the presence of 0.5 mM ATPgammaS, 10 mM MgCl(2) and 60 mM NaCl as K(d5.8)=0.94+/-0.13 microM at pH 5.8 and K(d7. 6)=25.4+/-6.4 microM at pH 7.6. The stoichiometries, n, for the two complexes (dA)(30)/(RepA)(6) dimer and (dA)(30)/(RepA)(6) at pH 5.8 and 7.6 were calculated from the corresponding binding curves. At pH 5.8 one (dA)(30) molecule was bound per (RepA)(6) dimer, while at pH 7.6 one (dA)(30) molecule was bound to one (RepA)(6). Binding curves were compatible with a single ssDNA binding site present on the (RepA)(6) dimer and on (RepA)(6), respectively, with no indication of cooperativity. (RepA)(6) tends to form larger aggregates under acidic conditions (pH<6.0) which are optimal for ssDNA binding. In contrast, at pH 5.8 in the presence of 60 mM NaCl, only the (RepA)(6) dimer was observed both in the absence and presence of (dA)(30).     

The binding mechanism of the yeast F1-ATPase inhibitory peptide: role of catalytic intermediates and enzyme turnover

The mechanism of inhibition of yeast mitochondrial F(1)-ATPase by its natural regulatory peptide, IF1, was investigated by correlating the rate of inhibition by IF1 with the nucleotide occupancy of the catalytic sites. Nucleotide occupancy of the catalytic sites was probed by fluorescence quenching of a tryptophan, which was engineered in the catalytic site (beta-Y345W). Fluorescence quenching of a beta-Trp(345) indicates that the binding of MgADP to F(1) can be described as 3 binding sites with dissociation constants of K(d)(1) = 10 +/- 2 nm, K(d2) = 0.22 +/- 0.03 microm, and K(d3) = 16.3 +/- 0.2 microm. In addition, the ATPase activity of the beta-Trp(345) enzyme followed simple Michaelis-Menten kinetics with a corresponding K(m) of 55 microm. Values for the K(d) for MgATP were estimated and indicate that the K(m) (55 microm) for ATP hydrolysis corresponds to filling the third catalytic site on F(1). IF1 binds very slowly to F(1)-ATPase depleted of nucleotides and under unisite conditions. The rate of inhibition by IF1 increased with increasing concentration of MgATP to about 50 mum, but decreased thereafter. The rate of inhibition was half-maximal at 5 microm MgATP, which is 10-fold lower than the K(m) for ATPase. The variations of the rate of IF1 binding are related to changes in the conformation of the IF1 binding site during the catalytic reaction cycle of ATP hydrolysis. A model is proposed that suggests that IF1 binds rapidly, but loosely to F(1) with two or three catalytic sites filled, and is then locked in the enzyme during catalytic hydrolysis of ATP.     

Thermodynamic characterization of the osmolyte- and ligand-folded states of Bacillus subtilis ribonuclease P protein

In Bacillus subtilis, P protein is the noncatalytic component of ribonuclease P (RNase P) that is critical for achieving maximal nuclease activity under physiological conditions. P protein is predominantly unfolded (D) at neutral pH and low ionic strength; however, it folds upon the addition of sulfate anions (ligands) as well as the osmolyte trimethylamine N-oxide (TMAO) [Henkels, C. H., Kurz, J. C., Fierke, C. A., and Oas, T. G. (2001) Biochemistry 40, 2777-2789]. Since the molecular mechanisms that drive protein folding for these two solutes are different, CD thermal denaturation studies were employed to dissect the thermodynamics of protein unfolding from the two folded states. A global fit of the free-energy of TMAO-folded P protein versus [TMAO] and temperature yields T(S), DeltaH(S), and DeltaC(p) of unfolding for the poorly populated, unliganded, folded state (N) in the absence of TMAO. These thermodynamic parameters were used in the fit of the data from the coupled unfolding/ligand dissociation reaction to obtain the sulfate dissociation constant (K(d)) and the DeltaH and DeltaC(p) of dissociation. These fits yielded a DeltaC(p) of protein unfolding of 826 +/- 23 cal mol(-)(1) K(-)(1) and a DeltaC(p) of 1554 +/- 29 cal mol(-)(1) K(-)(1) for the coupled unfolding and dissociation reaction (NL(2) --> D + 2L). The apparent stoichiometry of sulfate binding is two, so the DeltaC(p) increment of ligand dissociation is 363 +/- 9 cal mol(-)(1) K(-)(1) per site. Because N and NL(2) appear to be structurally similar and therefore similarly solvated using standard biophysical analyses, we attribute a substantial portion of this DeltaC(p) increment to an increase in conformational heterogeneity coincident with the NL(2) --> N + 2L transition.     

Solution NMR structure of the barrier-to-autointegration factor-Emerin complex

The barrier-to-autointegration factor BAF binds to the LEM domain (Em(LEM)) of the nuclear envelope protein emerin and plays an essential role in the nuclear architecture of metazoan cells. In addition, the BAF(2) dimer bridges and compacts double-stranded DNA nonspecifically via two symmetry-related DNA binding sites. In this article we present biophysical and structural studies on a complex of BAF(2) and Em(LEM). Light scattering, analytical ultracentrifugation, and NMR indicate a stoichiometry of one molecule of Em(LEM) bound per BAF(2) dimer. The equilibrium dissociation constant (K(d)) for the interaction of the BAF(2) dimer and Em(LEM), determined by isothermal titration calorimetry, is 0.59 +/- 0.03 microm. Z-exchange spectroscopy between corresponding cross-peaks of the magnetically non-equivalent subunits of the BAF(2) dimer in the complex yields a dissociation rate constant of 78 +/- 2s(-1). The solution NMR structure of the BAF(2)-Em(LEM) complex reveals that the LEM and DNA binding sites on BAF(2) are non-overlapping and that both subunits of the BAF(2) dimer contribute approximately equally to the Em(LEM) binding site. The relevance of the implications of the structural and biophysical data on the complex in the context of the interaction between the BAF(2) dimer and Em(LEM) at the nuclear envelope is discussed.     

Crystallization and preliminary X-ray data for the exocellular beta-lactamase of Bacillus licheniformis 749/C

The exocellular beta-lactamase from Bacillus licheniformis 749/C has been crystallized from polyethylene glycol solution at pH 5.5. An X-ray examination of the monoclinic crystals shows the space group is P21, with unit cell dimensions a = 66.77 A, b = 93.77 A, c = 43.57 A and beta = 104.5 degrees. The asymmetric unit consists of two molecules of 28,500 Mr each. The crystals are suitable for structure analysis to at least 2 A resolution.     

Quantitative interdependence of coeffectors, CcpA and cre in carbon catabolite regulation of Bacillus subtilis

The phosphoproteins HPrSerP and CrhP are the main effectors for CcpA-mediated carbon catabolite regulation (CCR) in Bacillus subtilis. Complexes of CcpA with HPrSerP or CrhP regulate genes by binding to the catabolite responsive elements (cre). We present a quantitative analysis of HPrSerP and CrhP interaction with CcpA by surface plasmon resonance (SPR) revealing small and similar equilibrium constants of 4.8 +/- 0.4 microm for HPrSerP-CcpA and 19.1 +/- 2.5 microm for CrhP-CcpA complex dissociation. Forty millimolar fructose-1,6-bisphosphate (FBP) or glucose-6-phosphate (Glc6-P) increases the affinity of HPrSerP to CcpA at least twofold, but have no effect on CrhP-CcpA binding. Saturation of binding of CcpA to cre as studied by fluorescence and SPR is dependent on 50 microm of HPrSerP or > 200 microm CrhP. The rate constants of HPrSerP-CcpA-cre complex formation are k(a) = 3 +/- 1 x 10(6) m(-1).s(-1) and k(d) = 2.0 +/- 0.4 x 10(-3).s(-1), resulting in a K(D) of 0.6 +/- 0.3 nm. FBP and Glc6-P stimulate CcpA-HPrSerP but not CcpA-CrhP binding to cre. Maximal HPrSerP-CcpA-cre complex formation in the presence of 10 mm FBP requires about 10-fold less HPrSerP. These data suggest a specific role for FBP and Glc6-P in enhancing only HPrSerP-mediated CCR.