Contribution of sludge adsorption and biodegradation to the removal of five pharmaceuticals in a submerged membrane bioreactor

A submerged membrane bioreactor was set up to investigate the removal efficiencies of five pharmaceuticals from synthetic domestic wastewater. Batch experiments were conducted with sterilized sludge and activated sludge to explore the contributions of sludge adsorption and biodegradation for those pharmaceuticals. Notable difference of those pharmaceuticals removal efficiencies was observed, at about 92.2, 90.0, 55.4, 38.5 and 3.2% for acetaminophen, 17β-estradiol, naproxen, diclofenac sodium, and carbamazepine, respectively. Results of batch adsorption experiments via sterilized sludge showed that the removal efficiencies of five pharmaceuticals by sludge adsorption were 7.9, 68.2, 60.1, 40.1 and 71.5%, respectively, which were positively correlated with their octanol–water partition coefficients. Results of batch experiments via activated sludge showed that 83.4% of acetaminophen, 98.0% of 17β-estradiol, and 46.8% of naproxen were removed through the combination of sludge adsorption and biodegradation, while adsorption accumulation in sludge phase was only 1.8, 1.3 and 7.0%. This implies that the removals of these three drugs were mainly achieved by biodegradation. The total removal efficiency of diclofenac sodium was 19.7%, and the contributions of sludge adsorption and biodegradation were 14.9 and 4.8%, which indicated that the removal of diclofenac sodium was mainly achieved by sludge adsorption. The total removal efficiency of carbamazepine was only 8.9% and this implies that neither sludge adsorption nor biodegradation is effective for its removal.     

Tertiary activated carbon treatment of paper and board industry wastewater

The feasibility of activated carbon post-treatment of (biologically treated) wastewater from the paper and board industry was investigated, the goal being to remove refractory organic pollutants and produce water that can be re-used in the production process. Because closing water-circuits in the paper and board industry results in higher water temperatures, the effect of the temperature on activated carbon treatment was also investigated. Batch and column adsorption tests showed that activated carbon provides an excellent removal of cationic demand and color related compounds, the two most important representatives of organic compounds that have to be removed. Unexpectedly, higher water temperatures enhanced the performance of activated carbon. However, the treatment costs, mainly determined by transport and regeneration of the carbon, were very high. At long contact times between the wastewater and the carbon the occurrence of biodegradation was observed. Biological regeneration of the carbon may therefore provide a means to reduce the treatment costs, but a practical application requires further research.     

Physical and chemical properties of selected agricultural byproduct-based activated carbons and their ability to adsorb geosmin

The objectives of this study were to evaluate selected physical and chemical properties of agricultural byproduct-based activated carbons made from pecan shells and sugarcane bagasse, and compare those properties to a commercial coal-based activated carbon as well as to compare the adsorption efficiency of these carbons for geosmin. Comparison of the physical and chemical properties of pecan shell- and bagasse-based carbons to the commercial carbon, Calgon Filtrasorb 400, showed that pecan shell carbon, but not the bagasse carbon, compared favorably to Filtrasorb 400, especially in terms of surface area, bulk density, ash and attrition. A carbon dosage study done in a model system showed the amount of geosmin adsorbed to be greater for Filtrasorb 400 and the bagasse-based carbon at low carbon concentrations than for the pecan shell carbons, but geosmin adsorption was similar in all carbons at higher carbon dosages. Application of the Freundlich isotherm model to the adsorption data showed that carbons made by steam activation of pecan shells or sugarcane bagasse had geosmin adsorption characteristics most like those of the commercial carbon. In terms of physical, chemical and adsorptive properties, steam-activated pecan shell carbon most resembled the commercial carbon and has the potential to replace Filtrasorb 400 in applications involving removal of geosmin from aqueous environments.     

Characterization of mesoporous activated carbons prepared by pyrolysis of sewage sludge with pyrolusite

Activated carbons were prepared from sewage sludge by chemical activation. Pyrolusite was added as a catalyst during activation and carbonization. The influence of the mineral addition on the properties of the activated carbons produced was evaluated. The results show that activated carbons from pyrolusite-supplemented sewage sludge had up to a 75% higher BET surface area and up to a 66% increase in mesoporosity over ordinary sludge-based activated carbons. Batch adsorption experiments applying the prepared adsorbents to synthetic dye wastewater treatment yielded adsorption data well fitted to the Langmuir isotherm. The adsorbents from pyrolusite-supplemented sludges performed better in dye removal than those without mineral addition, with the carbon from pyrolusite-augmented sludge T2 presenting a significant increase in maximum adsorption capacity of 50 mg/g. The properties of the adsorbents were improved during pyrolusite-catalyzed pyrolysis via enhancement of mesopore production, thus the mesopore channels may provide fast mass transfer for large molecules like dyes.     

Enhancement of Micropollutant Degradation at the Outlet of Small Wastewater Treatment Plants

The aim of this work was to evaluate low-cost and easy-to-operate engineering solutions that can be added as a polishing step to small wastewater treatment plants to reduce the micropollutant load to water bodies. The proposed design combines a sand filter/constructed wetland with additional and more advanced treatment technologies (UV degradation, enhanced adsorption to the solid phase, e.g., an engineered substrate) to increase the elimination of recalcitrant compounds. The removal of five micropollutants with different physico-chemical characteristics (three pharmaceuticals: diclofenac, carbamazepine, sulfamethoxazole, one pesticide: mecoprop, and one corrosion inhibitor: benzotriazole) was studied to evaluate the feasibility of the proposed system. Separate batch experiments were conducted to assess the removal efficiency of UV degradation and adsorption. The efficiency of each individual process was substance-specific. No process was effective on all the compounds tested, although elimination rates over 80% using light expanded clay aggregate (an engineered material) were observed. A laboratory-scale flow-through setup was used to evaluate interactions when removal processes were combined. Four of the studied compounds were partially eliminated, with poor removal of the fifth (benzotriazole). The energy requirements for a field-scale installation were estimated to be the same order of magnitude as those of ozonation and powdered activated carbon treatments.     

Pecan shell-based granular activated carbon for treatment of chemical oxygen demand (COD) in municipal wastewater

The present investigation was undertaken to compare the adsorption efficiency of pecan shell-based granular activated carbon with the adsorption efficiency of the commercial carbon Filtrasorb 200 with respect to uptake of the organic components responsible for the chemical oxygen demand (COD) of municipal wastewater. Adsorption efficiencies for these two sets of carbons (experimental and commercial) were analyzed by the Freundlich adsorption model. The results indicate that steam-activated and acid-activated pecan shell-based carbons had higher adsorption for organic matter measured as COD, than carbon dioxide-activated pecan shell-based carbon or Filtrasorb 200 at all the carbon dosages used during the experiment. The higher adsorption may be related to surface area as the two carbons with the highest surface area also had the highest organic matter adsorption. These results show that granular activated carbons made from agricultural waste (pecan shells) can be used with greater effectiveness for organic matter removal from municipal wastewater than a coal-based commercial carbon.     

Evaluating the Adsorption Potential of Alachlor and Its Subsequent Removal from Soils via Activated Carbon

Alachlor, a globally used aniline herbicide, has great agronomic interest for controlling the development of broadleaved weeds and grasses. This research aspires to evaluate the sorption attributes of Alachlor through batch equilibrium method and its successive removal through biomass based activated carbon prepared from Sawdust (Cedrus deodara). Six soil samples were collected from selected regions of Pakistan to assess the adsorption and removal phenomena. Adsorption capacity for Alachlor varied in soils depending upon their physicochemical properties. Adsorption coefficient (K_d) values ranged from 12 to 31 µg ml^?1 with the highest K_d value observed in soil sample with highest organic content (1.4%) and least pH (5.62). The Gibbs free energy values ranged from ?17 to ?20 kJ mol^?1 proposing physio-sorption and exothermic interaction with soils. Values of R² (0.96–0.99) exhibited the best fit to linear adsorption model. Adsorption coefficient displayed a negative correlation (r = ?0.97) with soil pH and positive correlation with organic matter (r = 0.87). The effect of contact time and pesticide concentration on the removal efficiency by activated carbon was investigated. The highest removal percentages observed through activated carbon were 66% and 64% at concentrations of 5 and 7.5 ppm respectively. Activated carbon from sawdust (Cedrus deodara) was investigated as a suitable adsorbent for the removal of Alachor from selected soils. Biomass based activated carbon can prove to be an effective and a sustainable mean to remove pesticides from soil.     

Removal of molybdate from water by adsorption onto ZnCl2 activated coir pith carbon

Removal and recovery of molybdate from aqueous solution was investigated using ZnCl2 activated carbon developed from coir pith. Studies were conducted to delineate the effects of contact time, adsorbent dose, molybdate concentration, pH and temperature. Two theoretical adsorption isotherms, namely, Langmuir and Freundlich were used to describe the experimental results. The Langmuir adsorption capacity (Q0) was found to be 18.9 mg molybdate/g of the adsorbent. Adsorption followed second order kinetics. Studies were performed at different pH values to find out the pH at which maximum adsorption occurred. The pH effect and desorption studies showed that ion exchange and chemisorption mechanism were involved in the adsorption process. Thermodynamic parameters such as DeltaG0, DeltaH0 and DeltaS0 for the adsorption were evaluated. Effect of foreign ions on adsorption of molybdate has been examined. The results showed that ZnCl2 activated coir pith carbon was effective for the removal and recovery of molybdate from water.     

Freundlich adsorption isotherms of agricultural by-product-based powdered activated carbons in a geosmin-water system

The present study was designed to model the adsorption of geosmin from water under laboratory conditions using the Freundlich isotherm model. This model was used to compare the efficiency of sugarcane bagasse and pecan shell-based powdered activated carbon to the efficiency of a coal-based commercial activated carbon (Calgon Filtrasorb 400). When data were generated from Freundlich isotherms, Calgon Filtrasorb 400 had greater geosmin adsorption at all geosmin concentrations studied than the laboratory produced steam-activated pecan shell carbon, steam-activated bagasse carbon, and the CO2-activated pecan shell carbon. At geosmin concentrations < 0.07 microg/l for the phosphoric acid-activated pecan shell carbon and below 0.08 microg/l for a commercially produced steam-activated pecan shell carbon obtained from Scientific Carbons, these two carbons had a higher calculated geosmin adsorption than Filtrasorb 400. While the commercial carbon was more efficient than some laboratory prepared carbons at most geosmin concentrations, the results indicate that when the amount of geosmin was below the threshold level of human taste (about 0.10 microg/l), the phosphoric acid-activated pecan shell carbon and the Scientific Carbons sample were more efficient than Filtrasorb 400 at geosmin removal.     

ZnCl2-Modified Activated Carbon from Biomass Coir Pith for the Removal of 2-Chlorophenol by Adsorption Process

Coir pith, a waste biomass, from coconut coir industry was used to prepare activated carbon with ZnCl₂ and employed for the removal of 2-chlorophenol (2-CP) from aqueous solution and wastewater. Zinc chloride–activated coir pith carbon (ZnCPC) was prepared by mixing coir pith with ZnCl₂ in the ratio 2:1 and carbonized at 700°C for 1 h. ZnCPC was characterized using standard physicochemical methods, Brunaver, Emmett, and Teller (BET) surface area, and scanning electron microscopy (SEM) studies. Batch mode adsorption studies were carried out to evaluate the effect of contact time, initial concentration, adsorbent dose, pH, and temperature. The Langmuir adsorption capacity Q ₀ was found to be 149.3 mg g^?1. Kinetic studies showed that the adsorption obeyed second-order and Bangham's model. Equilibrium adsorption data fit better into Langmuir, Freundlich, and D-R isotherms. pH effect and desorption studies showed that ion-exchange mechanism was involved in the adsorption process. Effect of temperature was not significant. Quantitative removal of 2-CP from synthetic wastewater was also achieved. ZnCPC is economically effective compared to commercial activated carbon, because the raw material is abundantly and freely available and it can be used effectively in the treatment of water contaminated with 2-CP.     

Activated carbons from waste biomass by sulfuric acid activation and their use on methylene blue adsorption

Preparation of the activated carbons from sunflower oil cake by sulphuric acid activation with different impregnation ratios was carried out. Laboratory prepared activated carbons were used as adsorbents for the removal of methylene blue (MB) from aqueous solutions. Liquid-phase adsorption experiments were conducted and the maximum adsorption capacity of each activated carbon was determined. The effects of various process parameters i.e., temperature, pH, initial methylene blue concentration, contact time on the adsorption capacity of each activated carbon were investigated. The kinetic models for MB adsorption onto the activated carbons were studied. Langmuir isotherm showed better fit than Freundlich isotherm for all activated carbon samples. The rates of adsorption were found to conform to the pseudo-second-order kinetics with good correlation. The separation factor (R(L)) revealed the favorable nature of the isotherm of the MB activated carbon system.     

Removal of color from biomethanated distillery spentwash by treatment with activated carbons

This work examined 19 carbon samples prepared by acid and thermal activation of various agro-residues viz. bagasse, bagasse flyash, sawdust, wood ash and rice husk ash for color removal from biomethanated distillery effluent. Phosphoric acid carbonized bagasse B (PH) showed the maximum color removal (50%). However, commercial activated carbons AC (ME) and AC (LB) showed better performance of over 80% color removal. Besides color removal, activated carbon treatment also showed reduction in chemical oxygen demand (COD), total organic carbon (TOC), phenol and total Kjeldahl nitrogen (TKN). The performance was related to the characteristics of the investigated samples. Further, adsorption isotherms for melanoidins, which is the primary coloring compound in distillery spentwash, followed the Langmuir isotherm implying monolayer adsorption.     

Adsorption Evaluation of Herbicide Iodosulfuron Followed by Cedrus deodora Sawdust-Derived Activated Carbon Removal

The paucity of sorption studies of sulfonylurea herbicide Iodosulfuron has led to the current research for investigation of this imperative phenomena. Iodosulfuron adsorption capacity was evaluated through batch equilibrium experiments in six soil samples collected from distinct geographical regions of Pakistan. Activated carbon prepared from sawdust (Cedrus deodara) was investigated as an economical and sustainable adsorbent for the removal of Iodosulfuron from selected soils. Removal efficiency was studied as a function of contact time and pesticide concentration. Results exhibited a good adsorption capability of Iodosulfuron in different soils. Adsorption coefficient values ranged from 8.9 to 26 mL/g. Soil pH and organic matter greatly influenced the rate of adsorption. The linear adsorption model fitted best with the experimental results. Gibbs free energy values (?17 to ?20 kJ/mol) proposed physisorption and exothermic interaction of Iodosulfuron with selected soils. Analysis of variance and regression displayed a negative correlation of soil pH and K_d (R² = ?0.91) and positive correlation with organic matter (R² = 0.87). A good removal rate for was observed in soils by sawdust-derived activated carbon. Soil properties mainly; pH, organic matter and sand content greatly influenced Iodosulfuron removal phenomena. Biomass-derived activated carbon can thus be utilized as a sustainable remediation tool.     

Kinetics of formation of humic substances in activated sludge systems and their effect on flocculation

Humic substances were isolated during batch aeration studies with activated sludge and a complex waste source, by using concentration and separation techniques that employ reverse osmosis, ultrafitration, and gel permeation chromatography. The study suggests that the formation of high molecular weight humic substances may occur after the removal of the readily available carbon source. The amount of refractory material finally present in the solution will depend on its adsorptive properties toward bacterial cells. The adsorptive characteristics may be determined by the magnitude of the carbohydrate fraction present in the humic substances. If the carbohydrate content decreases, adsorption onto the cells may decrease resulting in an impairment of both the floe formation and settleability of the sludge floes. Decreased adsorption will result in a higher total organic carbon content and an increase in color bearing materials in the effluent.     

Optimization of microporous palm shell activated carbon production for flue gas desulphurization: experimental and statistical studies

Optimizing the production of microporous activated carbon from waste palm shell was done by applying experimental design methodology. The product, palm shell activated carbon was tested for removal of SO2 gas from flue gas. The activated carbon production was mathematically described as a function of parameters such as flow rate, activation time and activation temperature of carbonization. These parameters were modeled using response surface methodology. The experiments were carried out as a central composite design consisting of 32 experiments. Quadratic models were developed for surface area, total pore volume, and microporosity in term of micropore fraction. The models were used to obtain the optimum process condition for the production of microporous palm shell activated carbon useful for SO2 removal. The optimized palm shell activated carbon with surface area of 973 m(2)/g, total pore volume of 0.78 cc/g and micropore fraction of 70.5% showed an excellent agreement with the amount predicted by the statistical analysis. Palm shell activated carbon with higher surface area and microporosity fraction showed good adsorption affinity for SO2 removal.     

Removal of nitrate-nitrogen from drinking water using bamboo powder charcoal

The adsorption effectiveness of bamboo powder charcoal (BPC); made from the residual of Moso bamboo manufacturing; in removing nitrate-nitrogen from water has been investigated. Commercial activated carbon (CAC) was also used to compare the effectiveness of adsorption in removal of nitrate-nitrogen. The adsorption effectiveness of BPC was higher than that of CAC; regardless of the concentration of nitrate-nitrogen; in the range of 0-10 mg/l. The effect of temperature on adsorption by BPC and CAC in the range of 10-20 degrees C was also investigated. From the results, it was found that the temperature dependency of the adsorption effectiveness of BPC was weaker than that of CAC. This fact indicates that BPC can be an attractive option for the in situ treatment by adsorption of nitrate-nitrogen-contaminated underground and surface water.     

Use of activated carbon as a support medium for H<Subscript>2</Subscript>S biofiltration and effect of bacterial immobilization on available pore surface

The use of support media for the immobilization of microorganisms is widely known to provide a surface for microbial growth and a shelter that protects the microorganisms from inhibitory compounds. In this study, activated carbon is used as a support medium for the immobilization of microorganisms enriched from municipal sewage activated sludge to remove gas-phase hydrogen sulfide (H₂S), a major odorous component of waste gas from sewage treatment plants. A series of designed experiments is used to examine the effect on bacteria-immobilized activated carbon (termed biocarbon) due to physical adsorption, chemical reaction, and microbial degradation in the overall removal of H₂S. H₂S breakthrough tests are conducted with various samples, including microbe-immobilized carbon and Teflon discs, salts-medium-washed carbon, and ultra-pure water-washed carbon. The results show a higher removal capacity for the microbe-immobilized activated carbon compared with the activated carbon control in a batch biofilter column. The increase in removal capacity is attributed to the role played by the immobilized microorganisms in metabolizing adsorbed sulfur and sulfur compounds on the biocarbon, hence releasing the adsorption sites for further H₂S uptake. The advantage for activated carbon serving as the support medium is to adsorb a high initial concentration of substrate and progressively release this for microbial degradation, hence acting as a buffer for the microorganisms. Results obtained from surface area and pore size distribution analyses of the biocarbon show a correlation between the available surface area and pore volume with the extent of microbial immobilization and H₂S uptake. The depletion of surface area and pore volume is seen as one of the factors which cause the onset of column breakthrough. Microbial growth retardation is due to the accumulation of metabolic products (i.e., sulfuric acid); and a lack of water and nutrient salts in the batch biofilter are other possible causes of column breakthrough.     

Effect of heat on the adsorption capacity of an activated carbon for decolorizing/deodorizing yellow zein

The Freundlich model was evaluated for use to assess the effect of heat on the adsorption capacity of an activated carbon for decolorizing/deodorizing corn zein. Because zein protein and its color/odor components are all adsorbed by activated carbon, a method to monitor their removal was needed. Yellow color is due to xanthophylls; a contributor to off-odor is diferuloylputrescine. The off-odor component absorbs ultraviolet (UV) light at about 325 nm and its removal coincides with removal of yellow color. A spectrophotometric method based on UV absorbances 280 nm for protein and 325 nm for the off-odor component was used to monitor their adsorptions onto activated carbon. Equilibrium studies were performed over temperature range from 25 to 60 degrees C for zein dissolved in 70% aqueous ethanol. Runs made at 55 degrees C adsorbed significantly more of the color/odor components than the protein.     

Dye adsorption by sewage sludge-based activated carbons in batch and fixed-bed systems

The present research work deals with the production of activated carbons by chemical activation and pyrolysis of sewage sludges. The adsorbent properties of these sewage sludges based activated carbons were studied by liquid-phase adsorption tests. Dyes removal from colored wastewater being a possible application for sludge based adsorbents, methylene blue and saphranine removing from solution was studied. Pure and binary adsorption assays were performed in batch and fixed bed systems. In all cases studied, the adsorbents produced from sewage sludges were able to adsorb both the compounds considered here. Nevertheless, time required for reaching equilibrium, adsorptive capacity and fixed bed characteristic parameters were different for these two compounds. Methylene blue adsorption occurred faster than that of saphranine, and it was preferably adsorbed when treating binary solutions. It could be concluded that the sewage sludge-based activated carbons may be promising for dyes removal from aqueous streams.