Applications of a signal averager for neurophysiological investigations in clinical function laboratories using a general signal-processing unit

A general 'coherent signal averager' software package which can be run on a small laboratory computer is presented as an application of a new approach to medical instrumentation. The combination of the minicomputer, preprocessing hardware and the above-mentioned software yields a flexible multipurpose averaging system for electrophysiological signals. The possibilities of the system are discussed with reference to visual evoked potential measurements in a clinical function laboratory.     

A reliable and inexpensive microprocessor system for collection and transfer of raw immunoassay data

A very low cost microprocessor system has been designed to ease data handling problems in a large workload immunoassay laboratory. The microprocessor collects and stores data from many immunoassay detection devices simultaneously, and transfers the data to a minicomputer for analysis as each measurement batch is completed. Stored data are protected against a mains power failure during collection and against non-availability of the minicomputer at transfer time. The system provides fast and reliable transfer of very large amounts of raw data from measurement devices to computer, and therefore facilitates the use of a statistically sound data reduction software package.     

A comprehensive package for DNA sequence analysis in FORTRAN IV for the PDP-11.

A computer package written in Fortran-IV for the PDP-11 minicomputer is described. The package's novel features are: software for voice-entry of sequence data; a less memory intensive algorithm for optimal sequence alignment; and programs that fit statistical models to nucleic acid and protein sequences.     

Dual wavelength/split beam spectrophotometry: computer acquisition of absorbance spectra.

The adaptation of a commercially available dual wavelength/split beam spectrophotometer for the real time acquisition by a minicomputer of absorbance spectra is described. The computer software and interface are designed so that: a) The normal operation of the spectrophotometer is unaltered; b) the adaptation of the spectrophotometer for computer acquisition of spectra is relatively simple and only a rudimentary knowledge of electronics and computer programming is required.The utility of this adaptation of a dual wavelength/split beam spectrophotometer for baseline correction, enhancement of the sensitivity of the spectrophotometer and subsequent analysis of recorded absorbance spectra is described.     

EEG data acquisition and preprocessing by microcomputer satellite system

Recent development in computer technology allows already medium scale EEG data processing to be performed within the clinical neurophysiology department, if a fast minicomputer with adequate mass storage and graphical output facilities is used. Data acquisition, however, should be delegated to a microcomputer which also should take over as much preprocessing as possible. A system is presented, where one or several microcomputer-based satellite units perform analog-digital conversion, Fourier transformation (FFT), calculation of power spectra and crossproducts, as well as event related averaging or other preprocessing procedures. The units are connected to a fast central minicomputer, where a supervisor program loads the microprocessors with their programs, supervises their activity, receives preprocessed data and activates appropriate postprocessing programs to produce the final results.     

From the genetic to the computer program: the historicity of 'data' and 'computation' in the investigations on the nematode worm C. elegans (1963-1998)

This paper argues that the history of the computer, of the practice of computation and of the notions of 'data' and 'programme' are essential for a critical account of the emergence and implications of data-driven research. In order to show this, I focus on the transition that the investigations on the worm C. elegans experienced in the Laboratory of Molecular Biology of Cambridge (UK). Throughout the 1980s, this research programme evolved from a study of the genetic basis of the worm's development and behaviour to a DNA mapping and sequencing initiative. By examining the changing computing technologies which were used at the Laboratory, I demonstrate that by the time of this transition researchers shifted from modelling the worm's genetic programme on a mainframe apparatus to writing minicomputer programs aimed at providing map and sequence data which was then circulated to other groups working on the genetics of C. elegans. The shift in the worm research should thus not be simply explained in the application of computers which transformed the project from hypothesis-driven to a data-intensive endeavour. The key factor was rather a historically specific technology-in-house and easy programmable minicomputers-which redefined the way of achieving the project's long-standing goal, leading the genetic programme to co-evolve with the practices of data production and distribution.     

DNA computing

Biocomputers can be an alternative for traditional "silicon-based" computers, which continuous development may be limited due to further miniaturization (imposed by the Heisenberg Uncertainty Principle) and increasing the amount of information between the central processing unit and the main memory (von Neuman bottleneck). The idea of DNA computing came true for the first time in 1994, when Adleman solved the Hamiltonian Path Problem using short DNA oligomers and DNA ligase. In the early 2000s a series of biocomputer models was presented with a seminal work of Shapiro and his colleguas who presented molecular 2 state finite automaton, in which the restriction enzyme, FokI, constituted hardware and short DNA oligomers were software as well as input/output signals. DNA molecules provided also energy for this machine. DNA computing can be exploited in many applications, from study on the gene expression pattern to diagnosis and therapy of cancer. The idea of DNA computing is still in progress in research both in vitro and in vivo and at least promising results of these research allow to have a hope for a breakthrough in the computer science.     

Fluctuations in tension during contraction of single muscle fibers.

We have searched for fluctuations in the steady-state tension developed by stimulated single muscle fibers. Such tension "noise" is expected to be present as a result of the statistical fluctuations in the number and/or state of myosin cross-bridges interacting with thin filament sites at any time. A sensitive electro-optical tension transducer capable of resolving the expected fluctuations in magnitude and frequency was constructed to search for the fluctuations. The noise was analyzed by computing the power spectra and amplitude of stochastic fluctuations in the photomultiplier counting rate, which was made proportional to muscle force. The optical system and electronic instrumentation together with the minicomputer software are described. Tensions were measured in single skinned glycerinated rabbit psoas muscle fibers in rigor and during contraction and relaxation. The results indicate the presence of fluctuations in contracting muscles and a complete absence of tension noise in eith rigor or relaxation. Also, a numerical method was developed to simulate the power spectra and amplitude of fluctuations, given the rate constants for association and dissociation of the cross-bridges and actin. The simulated power spectra and the frequency distributions observed experimentally are similar.     

An efficient medical database system implementation with its tool and data structure consideration

The development of a new system for medical database application running on minicomputer under MUMPS system is described. Two kinds of data representation in global structure are briefly reviewed. The use of a subject oriented multi-dimensional data structure greatly simplifies database design and facilitates data manipulation, organization, selective retrieval and software development. It is concluded that the program generator approach can provide the flexibility necessary for various applications and future growth of computerized medical record system. The final system has been proven effective in practical operation. The future extension concerns the introduction of multi-microprocessor structure and logic representation is presented.     

The use of digital filters in enhancing the fetal electrocardiogram

The use of a low pass digital filter limplemented as a software routine upon a minicomputer to enhance repetitive biological signals immersed in low frequency noise is described. The method by which a digital filter can emulate a hardware moving window averaging process is outlined. The results of applying such a filter to the enhancement of the fetal electrocardiogram are presented. The criteria used in setting up the filter are also discussed.     

A minicomputer system for analyzing and reporting pilot plant fermentor data

In 1979, a minicomputer system was developed for Hoffmann-La Roche by ABEC, Inc. for the purpose of achieving on-line analysis and reporting of data from 16 70-L pilot-plant fermentors (New Brunswick Scientific Co.). The system consists of a PDP 11/60 computer with 96K core capacity, two RL01 disk drives, two RX01 floppy-disk drives, LA-36 DECwriter terminal, Tektronix CRT, and Versatec printer plotter. DEC, PDP, RSX, RL01, RX01, LA-36, and DECwriter are trademarks of Digital Equipment Corporation. The computer software comprises three distinct groups of programs. RSX-11M is a disk-based operating system that allows quick response to realtime events, such as process monitoring and data acquisition, while carrying out less time-dependent activities, such as program development and graphical output. The AIM (Biles, Inc.) system is used to acquire and convert the voltage signals produced by pilot-plant instrumentation into engineering units. Analysis and graphical output are executed by ABEC and Versatec supplied programs. The most beneficial task performed by the computer is the production of graphical output of a variety of measured and analyzed data. This has led to an increase in personnel productivity and design of more meaningful experiments. An ancillary function of the system is to pick up data logged by a PDP 11/03 computer from a remote fermentation production plant by means of a MODEM interfaced communication link. Production data are analyzed and presented in a form identical with pilot-plant data. The experience with the system is discussed in this article.     

A software system to record and analyze digitized cell images

This paper describes basic software for digitization and processing of microscopic cell images used at the Department of Clinical Cytology at Uppsala University Hospital. A family of programs running on a PDP-8 minicomputer which is connected to a Leitz Orthoplan microscope with two image scanners, one diode-array scanner and a moving-stage photometer, is used for data collection. The digitized image data is converted by converted by conversion program to IBM compatible format. The data structures for image processing and statistical evaluation on the IBM system are also described. Finally, some experiences from the use of the software in cytology automation are discussed.     

Automatisation of chronic toxicities

Automatisation of collection and processing of chronic toxicity tests are presented in a ‘pharmaceutical research center environment’. The data are either analog signals or numerical values transmitted to the computer, from terminals posted in various laboratories. The minicomputer works under time-sharing system which allows many users to access to the programs in the same time. This system controls about 3000 results a day and prints complete reports in less than two days. Rewriting is then avoided thanks to this system, and in such a way, the reports are more reliable.     

Progress report of the TUDAB project for automated cancer cell detection.

Two methods for high resolution cell image data acquisition are applied routinely. Cells are either scanned by a computer controlled fast scanning microscope photometer (SMP) or a TV-camera. The software system for digital image analysis was completely revised and implemented on the PR 330 minicomputer. The system contains codes for primary cell data acquisition, segmentation of cells, cell feature extraction and statistical cell analysis. With this system, SMP and TV scanned cell data bases of PAP stained cells in vaginal smears, grouped into several classes, have been built up. Each data base contains 34 primary features and 20 feature combinations for each cell. A linear discriminant analysis is applied routinely for cell classification. The present state of the system and its operation are described, cell features and classification results are shown, and future steps for a prescreening strategy are discussed.     

Research on heterogeneous data integration model of group enterprise based on cluster computing

Cluster, consisting of a group of computers, is to act as a whole system to provide users with computer resources. Each computer is a node of this cluster. Cluster computer refers to a system consisting of a complete set of computers connected to each other. With the rapid development of computer technology, cluster computing technique with high performance–cost ratio has been widely applied in distributed parallel computing. For the large-scale close data in group enterprise, a heterogeneous data integration model was built under cluster environment based on cluster computing, XML technology and ontology theory. Such model could provide users unified and transparent access interfaces. Based on cluster computing, the work has solved the heterogeneous data integration problems by means of Ontology and XML technology. Furthermore, good application effect has been achieved compared with traditional data integration model. Furthermore, it was proved that this model improved the computing capacity of system, with high performance–cost ratio. Thus, it is hoped to provide support for decision-making of enterprise managers.     

Operant conditioning and behavioral analyses using a minicomputer.

An operant conditioning and data analysis software system was developed for use on a PDP-12A minicomputer. The operant software functions in quasi time-sharing fashion to control and acquire data from any peripheral device that operates in the binary mode. In addition to independently running different experiments in near simultaneous fashion, the program also provides information on the current status of each experiment using a cathode ray-tube display. Response data from each experimental subject is stored on magnetic tape and analyzed, off-line, by the data analysis portion of the software system. A discussion of the operation of this system is given for one possible application: visual discrimination training.     

A computer program for on-line measurement, storage, analysis and retrieval of urodynamic data

A computer program is presented which allows for direct connection of a minicomputer to a urodynamic set-up. The program stores measured pressure and flow data in a random access disc file with minimal intervention of the urodynamicist, and enables the direct application of a number of methods of analysis to the data. The program is modular, and other analysis methods are easily added. Results of analyses are stored in the same disc file, and both results and measured data can be quickly and easily retrieved. The program is written in FORTRAN; hardware-dependent functions (analog input, graphics display, and random access disc storage) are implemented in subroutines (partly assembler) which can easily be replaced.     

Two-parameter data acquisition system for rapid slit-scan analysis of mammalian chromosomes

A data acquisition system is described for recording two independent signals simultaneously from a laser-based flow cytometer for rapid slit-scan chromosome analysis. High-aperture microscope optics allow recording of fluorescence distributions along the longest axis of metaphase chromosomes with a spatial resolution better than 1 micron. Fluorescence and small angle forward light scatter as well as dual-wavelength fluorescence signals from Indian muntjac chromosomes stained with propidium iodide (PI) or acridine orange (AO) have been recorded simultaneously. While maintaining the multi-user operation of the computer, photomultiplier signals are digitized at a rate of 400 signals per second, stored temporarily in high-speed cache memories, and transferred subsequently to a minicomputer for further storage. Extensive software packages for data acquisition, analysis, and display of the results are described. Data acquisition is generally done in list mode, allowing complete reconstruction of individual signals (profiles) at any time. The distribution of stained constituents along the chromosomes can be displayed. Furthermore, histograms of various parameters of the input signals may be generated.     

Orthogonal polynomials used as soft tissue energy density functions

A mathematical method is developed for computing the coefficients of soft tissue energy density polynomials, satisfying certain constraints. The polynomial coefficients are computed in the least squares sense. It is demonstrated that this method: (a) determines up to 30 polynomial coefficients whereas the unmodified least squares method based on Maclaurin power series determines up to nine coefficients; an (b) increases numerical stability and accuracy by several orders of magnitude. All computations are carried out in single precision on a LS1-11/23 laboratory minicomputer. The algorithm is particularly useful for on-line data analysis using small laboratory computers.