The structural origin and biological function of pH-sensitivity in firefly luciferases.

Firefly luciferases are called pH-sensitive because their bioluminescence spectra display a typical red-shift at acidic pH, higher temperatures, and in the presence of heavy metal cations, whereas other beetle luciferases (click beetles and railroadworms) do not, and for this reason they are called pH-insensitive. Despite many studies on firefly luciferases, the origin of pH-sensitivity is far from being understood. This subject is revised in view of recent results. Some substitutions of amino-acid residues influencing pH-sensitivity in firefly luciferases have been identified. Sequence comparison, site-directed mutagenesis and modeling studies have shown a set of residues differing between pH-sensitive and pH-insensitive luciferases which affect bioluminescence colors. Some substitutions dramatically affecting bioluminescence colors in both groups of luciferases are clustered in the loop between residues 223-235 (Photinus pyralis sequence). A network of hydrogen bonds and salt bridges involving the residues N229-S284-E311-R337 was found to be important for affecting bioluminescence colors. It is suggested that these structural elements may affect the benzothiazolyl side of the luciferin-binding site affecting bioluminescence colors. Experimental evidence suggest that the residual red light emission in pH-sensitive luciferases could be a vestige that may have biological importance in some firefly species. Furthermore, the potential utility of pH-sensitivity for intracellular biosensing applications is considered.     

An alternative mechanism of bioluminescence color determination in firefly luciferase

Beetle luciferases (including those of the firefly) use the same luciferin substrate to naturally display light ranging in color from green (lambda(max) approximately 530 nm) to red (lambda(max) approximately 635 nm). In a recent communication, we reported (Branchini, B. R., Murtiashaw, M. H., Magyar, R. A., Portier, N. C., Ruggiero, M. C., and Stroh, J. G. (2002) J. Am. Chem. Soc. 124, 2112-2113) that the synthetic adenylate of firefly luciferin analogue D-5,5-dimethylluciferin was transformed into the emitter 5,5-dimethyloxyluciferin in bioluminescence reactions catalyzed by luciferases from Photinus pyralis and the click beetle Pyrophorus plagiophthalamus. 5,5-Dimethyloxyluciferin is constrained to exist in the keto form and fluoresces mainly in the red. However, bioluminescence spectra revealed that green light emission was produced by the firefly enzyme, and red light was observed with the click beetle protein. These results, augmented with steady-state kinetic studies, were taken as experimental support for mechanisms of firefly bioluminescence color that require only a single keto form of oxyluciferin. We report here the results of mutagenesis studies designed to determine the basis of the observed differences in bioluminescence color with the analogue adenylate. Mutants of P. pyralis luciferase putative active site residues Gly246 and Phe250, as well as corresponding click beetle residues Ala243 and Ser247 were constructed and characterized using bioluminescence emission spectroscopy and steady state kinetics with adenylate substrates. Based on an analysis of these and recently reported (Branchini, B. R., Southworth, T. L., Murtiashaw, M. H., Boije, H., and Fleet, S. E. (2003) Biochemistry 42, 10429-10436) data, we have developed an alternative mechanism of bioluminescence color. The basis of the mechanism is that luciferase modulates emission color by controlling the resonance-based charge delocalization of the anionic keto form of the oxyluciferin excited state.     

Site-directed mutagenesis of firefly luciferase active site amino acids: a proposed model for bioluminescence color.

Under physiological conditions firefly luciferase catalyzes the highly efficient emission of yellow-green light from the substrates luciferin, Mg-ATP, and oxygen. In nature, bioluminescence emission by beetle luciferases is observed in colors ranging from green (approximately 530 nm) to red (approximately 635 nm), yet all known luciferases use the same luciferin substrate. In an earlier report [Branchini, B. R., Magyar, R. M., Murtiashaw, M. H., Anderson, S. M., and Zimmer, M. (1998) Biochemistry 37, 15311-15319], we described the effects of mutations at His245 on luciferase activity. In the context of molecular modeling results, we proposed that His245 is located at the luciferase active site. We noted too that the H245 mutants displayed red-shifted bioluminescent emission spectra. We report here the construction and purification of additional His245 mutants, as well as mutants at residues Lys529 and Thr343, all of which are stringently conserved in the beetle luciferase sequences. Analysis of specific activity and steady-state kinetic constants suggested that these residues are involved in luciferase catalysis and the productive binding of substrates. Bioluminescence emission spectroscopy studies indicated that point mutations at His245 and Thr343 produced luciferases that emitted light over the color range from green to red. The results of mutational and biochemical studies with luciferase reported here have enabled us to propose speculative mechanisms for color determination in firefly bioluminescence. An essential role for Thr343, the participation of His245 and Arg218, and the involvement of bound AMP are indicated.     

Comparison of the thermostability of recombinant luciferases from Brazilian bioluminescent beetles: Relationship with kinetics and bioluminescence colours

Firefly luciferases have been used extensively as bioanalytical reagents and their cDNAs as reporter genes for biosensors and bioimaging, but they are in general unstable at temperatures above 30°C. In the past few years, efforts have been made to stabilize some firefly luciferases for better application as analytical reagents. Novel luciferases from different beetle families, displaying distinct bioluminescence colours and kinetics, may offer desirable alternatives to extend the range of applications. In the past years, our group has cloned the largest variety of luciferases from the three main families of bioluminescent beetles (Elateridae: P. termitilluminans, F. bruchi, P. angustus; Phengodidae: P. hirtus, P. vivianii; and Lampyridae: A. vivianii, C. distinctus and Macrolampis sp2) occurring in Brazilian biomes. We compared the thermostability of these recombinant luciferases and investigated their relationships with bioluminescence spectra and kinetics. The most thermostable luciferases were those of Pyrearinus termitilluminans larval click beetle (534 nm), Amydetes vivianii firefly (539 nm) and Phrixotrix vivianii railroad worm (546 nm), which are the most blue‐shifted examples in each family, confirming the trend that the most blue‐shifted emitting luciferases are also the most thermostable. Comparatively, commercial P. pyralis firefly luciferase was less thermostable than P. termitilluminans click beetle and A. vivianii firefly luciferases. The higher thermostability in these luciferases could be related to higher degree of hydrophobic packing and disulfide bond content (for firefly luciferases).     

Random mutagenesis of Luciola mingrelica firefly luciferase. Mutant enzymes with bioluminescence spectra showing low pH sensitivity

Most firefly luciferases demonstrate a strong pH-dependence of bioluminescence spectra. Gene region encoding first 225 residues of Luciola mingrelica luciferase was subjected to random mutagenesis, and four mutants with altered pH-sensitivity of bioluminescence spectra were isolated. F16L substitution showed distinctly lower pH-dependence of bioluminescence spectra, and Y35N,H and F16L/A40S substitutions resulted in the enzymes with bioluminescence spectra virtually independent from pH in the range of 6.0-7.8. The structural explanation is proposed for the effect of mutations on pH-sensitivity of bioluminescence spectra.     

A new blue-shifted luciferase from the Brazilian Amydetes fanestratus (Coleoptera: Lampyridae) firefly: molecular evolution and structural/functional properties

Firefly luciferases usually produce bioluminescence in the yellow-green region, with colors in the green and yellow-orange extremes of the spectrum being less common. Several firefly luciferases have already been cloned and sequenced, and site-directed mutagenesis studies have already identified important regions and residues for bioluminescence colors. However the structural determinants and mechanisms of bioluminescence colors turned out to be elusive, mainly when comparing luciferases with a high degree of divergence. Thus comparison of more similar luciferases producing colors in the two extremes of the spectrum could be revealing. The South-American fauna of fireflies remains largely unstudied, with some unique taxa that are not found anywhere else in the world and that produce a wide range of bioluminescence colors. Among them, fireflies of the genus Amydetes are especially interesting because its taxonomical status as an independent subfamily or as a tribe is not yet solved, and because they usually produce a continuous bright blue-shifted bioluminescence. In this work we cloned the cDNA for the luciferase of the Atlantic rain forest Amydetes fanestratus firefly, which is found near Sorocaba municipality (S?o Paulo, Brazil). Despite showing a higher degree of identity with the South-American Cratomorphus, the European Lampyris and the Asiatic Pyrocoelia, phylogenetical analysis of the luciferase sequence support the inclusion of Amydetes as an independent subfamily. Amydetes luciferase displays one of the most blue-shifted emission spectra (λ(max) = 538 nm) among beetle luciferases, with lower pH-sensitivity and higher affinity for ATP when compared to other luciferases, making this luciferase attractive for sensitive ATP and reporter assays.     

Orthologous gene of beetle luciferase in non-luminous click beetle, Agrypnus binodulus (Elateridae), encodes a fatty acyl-CoA synthetase

A homologous gene of beetle luciferase, AbLL (Agrypnus binodulusluciferase-like gene) was isolated from a Japanese non-luminous click beetle, A. binodulus, and its gene product was characterized. The identity of amino acid sequence deduced from AbLL with the click beetle luciferase from the Jamaican luminous click beetle, Pyrophorus plagiophthalmus, is 55%, which is higher than that between click beetle luciferase and firefly luciferase (approximately 48%). Phylogenetic analysis indicated that AbLL places in a clade of beetle luciferases, suggesting that AbLL is an orthologous gene of beetle luciferase. The gene product of AbLL (AbLL) has medium- and long-chain fatty acyl-CoA synthetase activity, but not luciferase activity. The fatty acyl-CoA synthetic activity was slightly inhibited in the presence of beetle luciferin, suggesting that AbLL has poor affinity for beetle luciferin. By comparing the amino acid residues of the catalytic domains in beetle luciferases with AbLL, the key substitutions for the luminescence activity in beetle luciferase will be proposed.     

The influence of insertion of a critical residue (Arg356) in structure and bioluminescence spectra of firefly luciferase

The firefly bioluminescence reaction, which uses luciferin, Mg-ATP, and molecular oxygen to yield an electronically excited oxyluciferin, is carried out by luciferase and visible light is emitted. The bioluminescence color of firefly luciferases is determined by the luciferase structure and assay conditions. Among different beetle luciferases, those from Phrixothrix railroad worm emit either yellow or red bioluminescence colors. Sequence alignment analysis shows that the red-emitter luciferase from Phrixothrix hirtus has an additional Arg residue at 353, which is absent in firefly luciferases. We report here the construction and purification of a mutant at residue Arg(356), which is not conserved in beetle luciferases. By insertion of an additional residue (Arg(356)) using site-specific insertion mutagenesis in a green-emitter luciferase (Lampyris turkestanicus) the color of emitted light was changed to red and the optimum temperature of activity was also increased. Insertion of this Arg in an important flexible loop showed changes of the bioluminescence color and the luciferase reaction took place with relatively retention of its basic kinetic properties such as Km and relative activity. Comparison of native and mutant luciferases using homology modeling reveals a significant conformational change of the flexible loop in the red mutant. Movement of flexible loop brought about a new ionic interaction concomitant with a change in polarity of the emitter site, thereby leading to red emission. It is worthwhile to note that the increased optimum temperature and emission of red light might make mutant luciferase a suitable reporter for the study of gene expression and bioluminescence imaging.     

Red-emitting luciferases for bioluminescence reporter and imaging applications

North American firefly Photinus pyralis luciferase, which emits yellow-green light (557 nm), has been adapted for a variety of applications, including gene reporter assays, whole-cell biosensor measurements, and in vivo imaging. Luciferase variants with red-shifted bioluminescence and high specific activity can be paired with green-emitting counterparts for use in dual-color reporter assays or can be used alone for in vivo imaging. Beginning with a previously reported red-emitting thermostable mutant and using mutagenesis techniques, we engineered two luciferases with redder emission maxima while maintaining satisfactory specific activities and thermostability. The novel enzymes were expressed in HEK293 cells, where they performed similarly to Promega’s codon-optimized click beetle red luciferase in model reporter assays. When the firefly luciferase variants were codon-optimized and retested using optimized substrate concentrations, they provided 50- to 100-fold greater integrated light intensities than the click beetle enzyme. These results suggest that the novel enzymes should provide superior performance in dual-color reporter and in vivo imaging applications, and they illustrate the importance of codon optimization for assays in mammalian cells.     

Suitability of Macrolampis firefly and Pyrearinus click beetle luciferases for bacterial light off toxicity biosensor

Bioluminescence is widely used in biosensors. For water toxicity analysis, the naturally bioluminescent bacteria Vibrio fischeri have been used extensively. We investigated the suitability of two new beetle luciferases for Escherichia coli light off biosensors: Macrolampis firefly and Pyrearinus termitilluminans click beetle luciferases. The bioluminescence detection assay using this system is very sensitive, being comparable or superior to V. fischeri. The luciferase of P. termitilluminans produces a strong and sustained bioluminescence that is useful for less sensitive and inexpensive assays that require integration of the emission, whereas Macrolampis luciferase displays a flash-like luminescence that is useful for fast and more sensitive assays. The effect of heavy metals and sanitizing agents was analyzed. Zinc, copper, 1-propanol, and iodide had inhibitory effects on bioluminescence and growth assays; however, in these cases the bioluminescence was not a very reliable indicator of cell growth and metabolic activity because these agents also inhibited the luciferase. On the other hand, mercury and silver strongly affected cell bioluminescence and growth but not the luciferase activity, indicating that bioluminescence was a reliable indicator of cell growth and metabolic activity in this case. Finally, bioluminescent E. coli immobilized in agarose matrix gave a more stable format for environmental assays.     

Improved practical usefulness of firefly luciferase by gene chimerization and random mutagenesis

To improve the practical usefulness of the firefly luciferase, we performed gene chimerization between Photinus pyralis luciferase and a thermostable variant of Luciola cruciata luciferase. One chimeric luciferase showed low K(m) value for substrate ATP and similar stability to thermostable L. cruciata luciferase. We then introduced random mutations in the corresponding gene and screened for increased catalytic efficiency. Amino acid replacement of Thr219, Val239 and Val290 affected the kinetic parameters. Therefore, we combined these three mutations. One mutant, ABcT219I,V239I, showed high catalytic efficiency comparable to P. pyralis luciferase and high stability similar to thermostable L. cruciata luciferase. The pH-dependence of the bioluminescence emission spectra was also examined. In contrast to wild-type firefly luciferases characterized to date, the mutant did not show the pH-dependent red spectrum shift.     

Bioluminescence and chemiluminescence literature: 1987 literature,part III

In studying beetle bioluminescence in the early 1960s, Dr McElroy and his colleagues found that the Jamaican click beetle, Pyrophorus plagiophthalamus, was capable of emitting different colours of light. They further found that the luciferin substrate used by this beetle was the same as that in the firefly, demonstrating that the different colours of bioluminescence were due to differences in the structure of the luciferases. We have recently cloned cDNAs from this beetle species which code for at least four different luciferases. The luciferases are distinguishable by their different colours of bioluminescence when expressed in Escherichia coli. The sequence differences between these different luciferases are few, so the amino acids responsible for the different colours of emission must also be few. Through the construction of hybrid luciferases, by rearranging fragments of the original cDNA clones, we have identified some of these amino acid determinants of colour.     

Cloning, sequence analysis, and expression of active Phrixothrix railroad-worms luciferases: relationship between bioluminescence spectra and primary structures.

Phrixothrix railroad-worms emit yellow-green light through 11 pairs of lateral lanterns along the body and red light through two cephalic lanterns. The cDNAs for the lateral lanterns luciferase of Phrixothrix vivianii, which emit green light (lambda max= 542 nm), and for the head lanterns of P. hirtus, which emit the most red-shifted bioluminescence (lambda max= 628 nm) among luminescent beetles, were cloned. Positive clones which emitted green (PvGR: lambda max= 549 nm) and red (PhRE: lambda max= 622 nm) bioluminescence were isolated. The lucifereases coded by PvGR (545 amino acid residues) and PhRE (546 amino acid residues) cDNAs share 71% identity. PvGR and PhRE luciferases showed 50-55% and 46-49% identity with firefly luciferases, respectively, and 47-49% with click-beetle luciferases. PhRE luciferase has some unique residues which replace invariant residues in other beetle luciferases. The additional residue Arg 352 in PhRE, which is deleted in PvGR polypeptide, seems to be another important structural feature associated with red light production. As in the case of other railroad-worms and click-beetle luciferases studied, Phrixothrix luciferases do not undergo the typical red shift suffered by firefly luciferases upon decreasing pH, a property which might be related to the many amino acid residues shared in common between railroad-worm and click-beetle luciferase.     

Introduction to beetle luciferases and their applications

All beetle luciferases have evolved from a common ancestor: they all use ATP, O₂, and a common luciferin as substrates. The most studied of these luciferases is that derived from the firefly Photinus pyralis, a beetle in the superfamily of Cantharoidea. The sensitivity with which the activity of this enzyme can be assayed has made it useful in the measurement of minute concentrations of ATP. With the cloning of the cDNA coding this luciferase, it has also found wide application in molecular biology as a reporter gene. We have recently cloned other cDNAs that code for luciferases from the bioluminescent click beetle, Pyrophorus plagiophthalamus, in the superfamily Elateroidea. These newly acquired luciferases are of at least four different types, distinguishable by their ability to emit different colours of bioluminescence ranging from green to orange. Unique properties of these luciferases, especially their emission of multiple colours, may make them additionally useful in applications.     

Bioluminescence Spectra of Native and Mutant Firefly Luciferases as a Function of pH

Bioluminescence spectra of the wild-type recombinant Luciola mingrelica firefly luciferase and its mutant form with the His433Tyr point mutation were obtained within the pH 5.6-10.2 interval. The spectra are shown to be a superposition of the spectra of the three forms of the electronically excited reaction product oxyluciferin: ketone (lambdamax = 618 nm), enol (lambdamax = 587 nm), and enolate-ion (lambdamax = 556 nm). The shift in lambdamax by 40 nm to the red region in the mutant luciferase bioluminescence at the pH optimum of enzyme activity (pH 7.8) is explained by the change in the relative content of different oxyluciferin forms due to the shift in the ketone <--> enol <--> enolate equilibria. A computer model of the luciferase-oxyluciferin-AMP complex was constructed and the structure of amino acid residues participating in the equilibrium is proposed. Computer models of the protein region near the His433 residue for the wild type and mutant luciferases are also proposed. Comparison of the models shows that the His433Tyr mutation increases flexibility of the polypeptide loop that binds the N and C domains of luciferase. As a result, the flexibility of the C domain amino acid residues in the emitter microenvironment increases, and this increase may be the reason for the observed differences in the bioluminescence spectra of the native and mutant luciferases.     

Thermostable red and green light-producing firefly luciferase mutants for bioluminescent reporter applications

Light emission from the North American firefly Photinus pyralis, which emits yellow-green (557-nm) light, is widely believed to be the most efficient bioluminescence system known, making this luciferase an excellent tool for monitoring gene expression. We present studies on the production of a set of thermostable red- and green-emitting luciferase mutants with bioluminescent properties suitable for dual-color reporter assays, biosensor measurements with internal controls, and imaging techniques. Starting with the luciferase variant Ser284Thr, we introduced the mutations Thr214Ala, Ala215Leu, Ile232Ala, Phe295Leu, and Glu354Lys to produce a new red-emitting enzyme with a bioluminescence maximum of 610 nm, narrow emission bandwidth, favorable kinetic properties, and excellent thermostability at 37 degrees C. By adding the same five changes to luciferase mutant Val241Ile/Gly246Ala/Phe250Ser, we produced a protein with an emission maximum of 546 nm, providing a set of thermostable enzymes whose bioluminescence maxima were separated by 64 nm. Model studies established that the luciferases could be detected at the attomole level and six orders of magnitude higher. In microplate luminometer format, mixtures containing 1.0 fmol total luciferase were quantified from measurements of simultaneously emitted red and green light. The results presented here provide evidence that it is feasible to monitor two distinct activities at 37 degrees C with these novel thermostable proteins.     

Luciferase from Fulgeochlizus bruchi (Coleoptera:Elateridae), a Brazilian click-beetle with a single abdominal lantern: molecular evolution, biological function and comparison with other click-beetle luciferases

Bioluminescent click-beetles emit a wide range of bioluminescence colors (λ(Max) = 534-594 nm) from thoracic and abdominal lanterns, which are used for courtship. Only the luciferases from Pyrophorus and Pyrearinus species were cloned and sequenced. The Brazilian Fulgeochlizus bruchi click-beetle, which inhabits the Central-west Cerrado (Savannas), is noteworthy because, differently from other click-beetles, the adult stage displays only a functional abdominal lantern, which produces a bright green bioluminescence for sexual attraction purposes, and lacks functional thoracic lanterns. We cloned the cDNA for the abdominal lantern luciferase of this species. Notably, the primary sequence of this luciferase showed slightly higher identity with the green emitting dorsal lantern luciferases of the Pyrophorus genus instead of the abdominal lanterns luciferases. This luciferase displays a blue-shifted spectrum (λ(Max) = 540 nm), which is pH-insensitive from pH 7.5 to 9.5 and undergoes a slight red shift and broadening above this pH; the lowest K(M) for luciferin among studied click-beetle luciferases, and the highest optimum pH (9.0) ever reported for a beetle luciferase. At pH 9.0, the K(M) for luciferin increases, showing a decrease of affinity for this substrate, despite the higher activity. The slow luminescence decay rate of F. bruchi luciferase in vitro reaction could be an adaptation of this luciferase for the long and sustained in vivo luminescence display of the click-beetle during the courtship, and could be useful for in vivo intracellular imaging.     

Few substitutions affect the bioluminescence spectra of Phrixotrix (Coleoptera: Phengodidae) luciferases: a site-directed mutagenesis survey.

Phrixotrix (railroad worm) luciferases produce bioluminescence in the green and red regions of the spectrum, depending on the location of the lanterns, and are the only luciferases naturally producing red bioluminescence. Comparison of the luciferase sequences showed a set of substitutions that could be involved in bioluminescence colour determination: (a) unique substitutions in the red luciferase replacing otherwise invariant residues; (b) conserved basic residues in the green-yellow emitting luciferases; and (c) an additional R353 residue in red-emitting luciferase (Viviani et al., 1999). To investigate whether these sites have a functional role in bioluminescence colour determination, we performed a site-directed mutagenesis. Natural substitutions in the region 220-344 and residues in the putative luciferin-binding site were also investigated. With the exception of the previously identified substitution of R215 and T226 (Viviani et al., 2002), which display dramatic red-shift effects on the spectrum of green-yellow-emitting luciferases, only a few substitutions had a moderate effect on the spectrum of the green-emitting luciferase. In contrast, no single substitution affected the spectrum of the red-emitting luciferase. The results suggest that the identity of the active site residues is not so critical for determining red bioluminescence in PxRE luciferase. Rather, the conformation assumed during the emitting step could be critical to set up proper interactions with excited oxyluciferin.     

Functional conversion of fatty acyl-CoA synthetase to firefly luciferase by site-directed mutagenesis: A key substitution responsible for luminescence activity

We demonstrated that firefly luciferase has a catalytic function of fatty acyl-CoA synthesis [Oba, Y., Ojika, M. and Inouye, S. (2003) Firefly luciferase is a bifunctional enzyme: ATP-dependent monooxygenase and a long chain fatty acyl-CoA synthetase. FEBS Lett. 540, 251-254] and proposed that the evolutionary origin of beetle luciferase is a fatty acyl-CoA synthetase (FACS) in insect. In this study, we performed the functional conversion of FACS to luciferase by replacing a single amino acid to serine. This serine residue is conserved in luciferases and possibly interacts with luciferin. The mutants of FACSs in non-luminous click beetle Agrypnus binodulus (AbLL) and Drosophilamelanogaster (CG6178) gave luminescence enhancement, suggesting that the serine residue is a key substitution responsible for luminescence activity.     

Crystal structure of native and a mutant of Lampyris turkestanicus luciferase implicate in bioluminescence color shift

Firefly bioluminescence reaction in the presence of Mg^2 +, ATP and molecular oxygen is carried out by luciferase. The luciferase structure alterations or modifications of assay conditions determine the bioluminescence color of firefly luciferase. Among different beetle luciferases, Phrixothrix hirtus railroad worm emits either yellow or red bioluminescence color. Sequence alignment analysis shows that the red-emitter luciferase from Phrixothrix hirtus has an additional arginine residue at 353 that is absent in other firefly luciferases. It was reported that insertion of Arg in an important flexible loop350–359 showed changes in bioluminescence color from green to red and the optimum temperature activity was also increased. To explain the color tuning mechanism of firefly luciferase, the structure of native and a mutant (E354R/356R/H431Y) of Lampyris turkestanicus luciferase is determined at 2.7 Å and 2.2 Å resolutions, respectively. The comparison of structure of both types of Lampyris turkestanicus luciferases reveals that the conformation of this flexible loop is significantly changed by addition of two Arg in this region. Moreover, its surface accessibility is affected considerably and some ionic bonds are made by addition of two positive charge residues. Furthermore, we noticed that the hydrogen bonding pattern of His431 with the flexible loop is changed by replacing this residue with Tyr at this position. Juxtaposition of a flexible loop (residues 351–359) in firefly luciferase and corresponding ionic and hydrogen bonds are essential for color emission.