The production of single-stranded DNA suitable for sequencing using the polymerase chain reaction

A simple and reliable procedure for the amplification of single-stranded DNA suitable for sequencing is described. This procedure employs the polymerase chain reaction and implements modifications pertaining to the purification of the double-stranded DNA product prior to single-stranded DNA amplification. The most consistent sequencing reactions are obtained when the double-stranded DNA product is purified by centrifugation with a microconcentrator prior to single-stranded DNA amplification and the overall amount of specific primers and number of cycles used, in both single-stranded and double-stranded DNA polymerase chain reactions, are reduced.     

Effect of highly fragmented DNA on PCR.

We characterized the behavior of polymerase chain reactions (PCR) using degraded DNA as a template. We first demonstrated that fragments larger than the initial template fragments can be amplified if overlapping fragments are allowed to anneal and extend prior to routine PCR. Amplification products increase when degraded genomic DNA is pretreated by polymerization in the absence of specific primers. Secondly, we measured nucleotide uptake as a function of template DNA degradation. dNTP incorporation initially increases with increasing DNA fragmentation and then declines when the DNA becomes highly degraded. We demonstrated that dNTP uptake continues for >10 polymerization cycles and is affected by the quality and quantity of template DNA and by the amount of substrate dNTP. These results suggest that although reconstruction of degraded DNA may allow amplification of large fragments, reconstructive polymerization and amplification polymerization may compete. This was confirmed in PCR where the addition of degraded DNA reduced the resultant product. Because terminal deoxynucleotidyl transferase activity of Taq polymerase may inhibit 3' annealing and restrict the length of template reconstruction, we suggest modified PCR techniques which separate reconstructive and amplification polymerization reactions.     

A rapid method for site-specific mutagenesis and directional subcloning by using the polymerase chain reaction to generate recombinant circles

Site-specific mutagenesis and directional subcloning were accomplished by using the polymerase chain reaction to generate products that can recombine to form circular DNA. This DNA was transfected into E. coli without phosphorylation of primers, restriction enzyme digestion or ligation. Specifically, the polymerase chain reaction was used to generate products that when combined, denatured and reannealed, form double-stranded DNA with discrete, cohesive single-stranded ends. The generation of these cohesive ends of DNA permits the formation of precise, directional DNA joints without dependence on enzyme restriction sites. The primers were designed such that these cohesive single-stranded ends annealed to form circular DNA. The recombinant of interest was generated following only 14 amplification cycles. These recombinant circles of DNA were directly transfected into E. coli. In the mutagenesis protocol, the desired mutant was obtained at 83%-100% efficiency. Unwanted mutations were not detected, indicating a less than 0.025% nucleotide misincorporation frequency. In the directional subcloning protocol, inserts were positioned precisely in the recipient plasmid and were in the correct orientation. One unwanted mutation was detected after sequencing 900 bases, indicating a 0.11% nucleotide misincorporation frequency. Each manipulation, from setting up for the DNA amplification to transfection into E. coli. can easily be accomplished in one day.     

Optimization of asymmetric polymerase chain reaction for rapid fluorescent DNA sequencing

A high-throughput method for the preparation of single-stranded template DNA, which is suitable for sequence analysis using fluorescent labeling chemistry, is described here. In this procedure, the asymmetric polymerase chain reaction is employed to amplify recombinant plasmid or bacteriophage DNA directly from colonies or plaques. The use of amplification primers located at least 200 base pairs 5' to the site of sequencing primer annealing removes the need for extensive purification of the asymmetric polymerase chain reaction product. Instead, the single-stranded product DNA is purified by a simple isopropanol precipitation step and then directly sequenced using fluorescent dye-labeled oligonucleotides. This method significantly reduces the time and labor required for template preparation and improves fluorescent DNA sequencing strategies by providing a much more uniform yield of single-stranded DNA.     

Improved single-strand conformation polymorphism analysis by asymmetric polymerase chain reaction with end-labeled primers

An improved form of single-strand conformation polymorphism (SSCP) assay has been developed for the analysis of bovine major histocompatibility complex class II alleles. The method uses asymmetric polymerase chain reaction (PCR) amplification from each of two end-labeled primers to generate individual single-stranded products that are analyzed by electrophoresis in nondenaturing polyacrylamide gels. This technique gives good resolution of labeled single strands derived from 392-bp bovine DRB exon-2 PCR products, without interference from double-stranded products, and enables assignment of SSCP bands to the individual strands of the template DNA. The allelic groupings defined by this method in a panel of test animals were confirmed by independent typing by restriction fragment-length polymorphism.     

Nucleotide analogs facilitate base conversion with 3' mismatch primers

We compared the efficiency of PCR amplification using primers containing either a nucleotide analog or a mismatch at the 3' base. To determine the distribution of bases inserted opposite eight different analogs, 3' analog primers were used to amplify four different templates. The products from the reactions with the highest amplification efficiency were sequenced.Analogs allowing efficient amplification followed by insertion of a new base at that position are herein termed 'convertides'. The three convertides with the highest amplification efficiency were used to convert sequences containing C, T, G and A bases into products containing the respective three remaining bases. Nine templates were used to generate conversion products, as well as non-conversion control products with no base change. We compared the ability of natural bases to convert specific sites with and without a preconversion step using nucleotide analog primers. Conversion products were identified by a ligation detection reaction using primers specific for the converted sequence. We found that conversions resulting in transitions were easier to accomplish than transversions and that sequence context influences conversion. Specifically, primer slippage appears to be an important mechanism for producing artifacts via polymerase extension of a 3' base or analog transiently base paired to neighboring bases of the template. Nucleotide analogs could often reduce conversion artifacts and increase the yield of the expected product. While new analogs are needed to reliably achieve transversions, the current set have proven effective for creating transition conversions.     

Formation of Template-Switching Artifacts by Linear Amplification

Linear amplification is a method of synthesizing single-stranded DNA from either a single-stranded DNA or one strand of a double-stranded DNA. In this protocol, molecules of a single primer DNA are extended by multiple rounds of DNA synthesis at high temperature using thermostable DNA polymerases. Although linear amplification generates the intended full-length single-stranded product, it is more efficient over single-stranded templates than double-stranded templates. We analyzed linear amplification over single- or double-stranded mouse H-ras DNA (exon 1–2 region). The single-stranded H-ras template yielded only the intended product. However, when the double-stranded template was used, additional artifact products were observed. Increasing the concentration of the double-stranded template produced relatively higher amounts of these artifact products. One of the artifact DNA bands could be mapped and analyzed by sequencing. It contained three template-switching products. These DNAs were formed by incomplete DNA strand extension over the template strand, followed by switching to the complementary strand at a specific Ade nucleotide within a putative hairpin sequence, from which DNA synthesis continued over the complementary strand.     

Dual asymmetric PCR: one-step construction of synthetic genes.

We have developed a one-step process for constructing synthetic genes. Four adjacent oligonucleotides 17-100 bases in length having short overlaps of 15-17 bases are used as primers in a PCR mixture. The quantity of the two internal primers is highly limited, and the resultant reaction causes an asymmetric single-stranded amplification of the two halves of the total sequence due to an excess of the two flanking primers. In subsequent PCR cycles, these dual asymmetrically amplified fragments, which overlap each other, yield a double-stranded, full-length product.     

Effects of T antigen and replication protein A on the initiation of DNA synthesis by DNA polymerase alpha-primase.

Studies of simian virus 40 (SV40) DNA replication in a reconstituted cell-free system have established that T antigen and two cellular replication proteins, replication protein A (RP-A) and DNA polymerase alpha-primase complex, are necessary and sufficient for initiation of DNA synthesis on duplex templates containing the SV40 origin of DNA replication. To better understand the mechanism of initiation of DNA synthesis, we analyzed the functional interactions of T antigen, RP-A, and DNA polymerase alpha-primase on model single-stranded DNA templates. Purified DNA polymerase alpha-primase was capable of initiating DNA synthesis de novo on unprimed single-stranded DNA templates. This reaction involved the synthesis of a short oligoribonucleotide primer which was then extended into a DNA chain. We observed that the synthesis of ribonucleotide primers by DNA polymerase alpha-primase is dramatically stimulated by SV40 T antigen. The presence of T antigen also increased the average length of the DNA product synthesized on primed and unprimed single-stranded DNA templates. These stimulatory effects of T antigen required direct contact with DNA polymerase alpha-primase complex and were most marked at low template and polymerase concentrations. We also observed that the single-stranded DNA binding protein, RP-A, strongly inhibits the primase activity of DNA polymerase alpha-primase, probably by blocking access of the enzyme to the template. T antigen partially reversed the inhibition caused by RP-A. Our data support a model in which DNA priming is mediated by a complex between T antigen and DNA polymerase alpha-primase with the template, while RP-A acts to suppress nonspecific priming events.     

Initiation of RNA-primed DNA synthesis in vitro by DNA polymerase alpha-primase.

The initiation of new DNA strands at origins of replication in animal cells requires de novo synthesis of RNA primers by primase and subsequent elongation from RNA primers by DNA polymerase alpha. To study the specificity of primer site selection by the DNA polymerase alpha-primase complex (pol alpha-primase), a natural DNA template containing a site for replication initiation was constructed. Two single-stranded DNA (ssDNA) molecules were hybridized to each other generating a duplex DNA molecule with an open helix replication 'bubble' to serve as an initiation zone. Pol alpha-primase recognizes the open helix region and initiates RNA-primed DNA synthesis at four specific sites that are rich in pyrimidine nucleotides. The priming site positioned nearest the ssDNA-dsDNA junction in the replication 'bubble' template is the preferred site for initiation. Using a 40 base oligonucleotide template containing the sequence of the preferred priming site, primase synthesizes RNA primers of 9 and 10 nt in length with the sequence 5'-(G)GAAGAAAGC-3'. These studies demonstrate that pol alpha-primase selects specific nucleotide sequences for RNA primer formation and suggest that the open helix structure of the replication 'bubble' directs pol alpha-primase to initiate RNA primer synthesis near the ssDNA-dsDNA junction.     

A simple method for the preparation of single-stranded polydeoxynucleotides of desired length.

A method for the preparation of homogeneous, single-stranded polydeoxynucleotides of desired length up to 800 bases is described. The procedure entails 1) generation of double-stranded DNA of desired length by PCR using a pair of primers of which one is biotinylated and the other is either unlabeled or fluorescently labeled, 2) isolation of PCR products by agarose slab gel electrophoresis, 3) recovery of desired product by electroelution, 4) binding of the product to streptavidin-coated magnetic beads and is followed by 5) duplex denaturation and removal of the unbound single strand that is either unlabeled or fluorescently labeled. Final product characteristics were determined by capillary gel electrophoresis with fluorescence detection. Up to microgram quantities of homogeneous single-stranded DNA of a desired length were obtained. These can be used as single-stranded size standards in capillary gel electrophoresis experiments as well as in other techniques requiring such standards.     

Complete replication of templates by Escherichia coli DNA polymerase III holoenzyme

DNA polymerase III holoenzyme (holoenzyme) processively and rapidly replicates a primed single-stranded DNA circle to produce a duplex with an interruption in the synthetic strand. The precise nature of this discontinuity in the replicative form (RF II) and the influence of the 5' termini of the DNA and RNA primers were analyzed in this study. Virtually all (90%) of the RF II products primed by DNA were nicked structures sealable by Escherichia coli DNA ligase; in 10% of the products, replication proceeded one nucleotide beyond the 5' DNA terminus displacing (but not removing) the 5' terminal nucleotide. With RNA primers, replication generally went beyond the available single-stranded template. The 5' RNA terminus was displaced by 1-5 nucleotides in 85% of the products; a minority of products was nicked (9%) or had short gaps (6%). Termination of synthesis on a linear DNA template was usually (85%) one base shy of completion. Thus, replication by holoenzyme utilizes all, or nearly all, of the available template and shows no significant 5'----3' exonuclease action as observed in primer removal by the "nick-translation" activity of DNA polymerase I.     

Improvement of single nucleotide polymorphism genotyping by allele-specific PCR using primers modified with an ENA residue

When we placed an ENA residue into primers at the 3' end, or the n-1, n-2, or n-3 position, which included a single nucleotide polymorphism (SNP) site at the 3' end, only primers containing the ENA residue at the n-2 position were read by Taq DNA polymerase for amplification. The use of the ENA primers avoided the generation of undesired short products, which are thought to be derived from primer-dimers. A greater discrimination of the SNP site by these primers containing the ENA residue was observed compared with that of the corresponding unmodified DNA primers that are often used for allele-specific polymerase chain reaction (AS-PCR). This improvement is probably due to the difficulty of incorporating a nucleotide into the mismatched ENA primer by Taq DNA polymerase in the modified primer-template duplex. These results demonstrate that ENA primer-based AS-PCR would enable a rapid and reliable technique for SNP genotyping.     

Method enabling pyrosequencing on double-stranded DNA

Pyrosequencing is a new nonelectrophoretic, single-tube DNA sequencing method that takes advantage of co-operativity between four enzymes to monitor DNA synthesis (M. Ronaghi, M. Uhlén, and P. Nyrén, Science 281, 363-365). Pyrosequencing has so far only been performed on single-stranded DNA. In this paper different enzymatic strategies for template preparation enabling pyrosequencing on double-stranded DNA were studied. High quality data were obtained with several different enzyme combinations: (i) shrimp alkaline phosphatase and exonuclease I, (ii) calf intestine alkaline phosphatase and exonuclease I, (iii) apyrase and inorganic pyrophosphatase together with exonuclease I, and (iv) apyrase and ATP sulfurylase together with exonuclease I. In many cases, when the polymerase chain reaction was efficient exonuclease I could be omitted. In certain cases, additives such as dimethyl sulfoxide, single-stranded DNA-binding protein, and Klenow DNA polymerase improved the sequence quality. Apyrase was the fastest and most efficient of the three different nucleotide degrading enzymes tested. The data quality obtained on double-stranded DNA was comparable with that on single-stranded DNA. Pyrosequencing data for more than 30 bases could be generated on both long and short templates, as well as on templates with high GC content.     

Termination sites of the in vitro DNA synthesis on single-stranded DNA photosensitized by promazines

Bacteriophage phi X174 and M13 mp9 single-stranded DNA molecules were primed either with restriction fragments or synthetic primers and irradiated with near UV light in the presence of promazine derivatives. These DNAs were used as template for in vitro complementary chain synthesis by Escherichia coli DNA polymerase I large fragment. Chain terminations were observed by denaturing polyacrylamide gel electrophoresis of the synthesis products and localized by comparison with a standard dideoxy sequencing pattern. More than 90% of the chain terminations were mapped exactly one nucleotide before a guanine residue. In addition, photoreaction was shown to occur more predominantly with guanine residues localized in single-stranded parts of the genome. The same guanine residues could also be damaged when the reaction was performed, in the dark, in the presence of the artificially generated promazine cation radicals. Using the BamHI-SmaI adaptor (5'GATCCCCGGG-3'), it was shown that the guanine alteration was a covalent addition of the promazine, or of a cation radical photodegradation product, on the guanine moiety. Kinetics of chlorpromazine photoaddition on single-stranded and double-stranded DNAs were determined.     

3'-5' exonuclease of Klenow fragment: role of amino acid residues within the single-stranded DNA binding region in exonucleolysis and duplex DNA melting

The mechanism of the 3'-5' exonuclease activity of the Klenow fragment of DNA polymerase I has been investigated with a combination of biochemical and spectroscopic techniques. Site-directed mutagenesis was used to make alanine substitutions of side chains that interact with the DNA substrate on the 5' side of the scissile phosphodiester bond. Kinetic parameters for 3'-5' exonuclease cleavage of single- and double-stranded DNA substrates were determined for each mutant protein in order to probe the role of the selected side chains in the exonuclease reaction. The results indicate that side chains that interact with the penultimate nucleotide (Q419, N420, and Y423) are important for anchoring the DNA substrate at the active site or ensuring proper geometry of the scissile phosphate. In contrast, side chains that interact with the third nucleotide from the DNA terminus (K422 and R455) do not participate directly in exonuclease cleavage of single-stranded DNA. Alanine substitutions of Q419, Y423, and R455 have markedly different effects on the cleavage of single- and double-stranded DNA, causing a much greater loss of activity in the case of a duplex substrate. Time-resolved fluorescence anisotropy decay measurements with a dansyl-labeled primer/template indicate that the Q419A, Y423A, and R455A mutations disrupted the ability of the Klenow fragment to melt duplex DNA and bind the frayed terminus at the exonuclease site. In contrast, the N420A mutation stabilized binding of a duplex terminus to the exonuclease site, suggesting that the N420 side chain facilitates the 3'-5' exonuclease reaction by introducing strain into the bound DNA substrate. Together, these results demonstrate that protein side chains that interact with the second or third nucleotides from the terminus can participate in both the chemical step of the exonuclease reaction, by anchoring the substrate in the active site or by ensuring proper geometry of the scissile phosphate, and in the prechemical steps of double-stranded DNA hydrolysis, by facilitating duplex melting.     

Deletion mutagenesis in M13 by polymerase chain reaction using universal sequencing primers

A simple procedure is described for the efficient deletion of large DNA sequences. The method involves a combination of oligonucleotide-directed mutagenesis in bacteriophage M13 and amplification of the mutagenized product by polymerase chain reaction. In contrast to other protocols employing polymerase chain reaction, synthesis of only one specific primer is required. The efficiency of heteroduplex formation between mutagenic primers directing large deletions and single-stranded template is discussed.     

Complete enzymatic synthesis of DNA containing the SV40 origin of replication

The replication of simian virus 40 origin-containing DNA has been reconstituted in vitro with SV40 large T antigen and purified proteins isolated from HeLa cells. Covalently closed circular DNA (RF I') daughter molecules are formed in the presence of T antigen, a single-stranded DNA binding protein and DNA polymerase alpha-primase complex, together with ribonuclease H, DNA ligase, topoisomerase II, and a double-stranded specific exonuclease that has been purified to homogeneity. The 44-kDa exonuclease-digested oligo(rA) annealed to poly(dT) in the 5'----3' direction. DNA ligase and the 5'----3' exonuclease were essential for RF I' formation. Covalently closed circular duplex DNA and full length linear single-stranded DNA were detected by alkaline gel electrophoresis as products of the complete system. DNA replication in the absence of either DNA ligase or the 5'----3' exonuclease yielded DNA products that were half length (approximately 1500 nucleotides) and smaller Okazaki-like fragments (approximately 200 nucleotides). Hybridization experiments showed that the longer chains were synthesized from the leading strand template, while the small products were synthesized from the lagging strand template. These results suggest that the RNA primers attached to 5' ends of replicated DNA are completely removed by the 5'----3' exonuclease, with the assistance of RNase H.