Presence of a coordinated metal ion in a trans-acting antigenomic delta ribozyme.

We have investigated the cleavage induced by metal ions in an antigenomic form of a trans-acting delta ribozyme. A specific Mg(2+)-induced cleavage at position G(52)at the bottom of the P2 stem was observed to occur solely within catalytically active ribozyme-substrate complexes (i.e. those that performed the essential conformational transition step). Only the divalent cations which support catalytic activity permitted the detection of specific induced cleavages in this region. Using various mutant ribozymes and substrates, we demonstrated a correlation between enzymatic activity and the Mg(2+)-induced cleavage pattern. We show that the efficiency of the coordination of the magnesium to its binding site is related to the nature of the base pair in the middle of the P1 stem (i.e. Rz(23)-S(8)). Together with additional evidence from nuclease probing experiments that indicates the occurrence of a structural rearrangement involving the bottom of the P2 stem upon formation of the P1 helix, these results show that an intimate relationship exists between the folding and the catalytic activity of the delta ribozyme.     

Mutational analysis of the antigenomic trans-acting delta ribozyme: the alterations of the middle nucleotides located on the P1 stem

Our previous report on delta ribozyme cleavage using a trans -acting antigenomic delta ribozyme and a collection of short substrates showed that the middle nucleotides of the P1 stem, the substrate binding site, are essential for the cleavage activity. Here we have further investigated the effect of alterations in the P1 stem on the kinetic and thermodynamic parameters of delta ribozyme cleavage using various ribozyme variants carrying single base mutations at putative positions reported. The kinetic and thermodynamic values obtained in mutational studies of the two middle nucleotides of the P1 stem suggest that the binding and active sites of the delta ribozyme are uniquely formed. Firstly, the substrate and the ribozyme are engaged in the formation of a helix, known as the P1 stem, which may contain a weak hydrogen bond(s) or a bulge. Secondly, a tertiary interaction involving the base moieties in the middle of the P1 stem likely plays a role in defining the chemical environment. As a con-sequence, the active site might form simultaneously or subsequently to the binding site during later steps of the pathway.     

Kinetic and binding analysis of the catalytic involvement of ribose moieties of a trans-acting delta ribozyme

We have identified ribose 2'-hydroxyl groups (2'-OHs) that are critical for the activity of a trans-cleaving delta ribozyme derived from the antigenomic strand of the hepatitis delta virus. Initially, an RNA-DNA mixed ribozyme composed of 26 deoxyribo- (specifically the nucleotides forming the P2 stem and the P4 stem-loop) and 31 ribonucleotides (those forming the catalytic center) was engineered. This mixed ribozyme catalyzed the cleavage of a small substrate with kinetic parameters virtually identical to those of the all-RNA ribozyme. The further substitution of deoxyribose for ribose residues permitted us to investigate the contribution of all 2'-OHs to catalysis. Determination of the kinetic parameters for the cleavage reaction of the resulting ribozymes revealed (i) 10 2'-OH groups appear to be important in supporting the formation of several hydrogen bonds within the catalytic core, (ii) none of the important 2'-OHs seem to coordinate a magnesium cation, and (iii) 1 of the tested RNA-DNA mixed polymers appeared to stabilize the ribozyme-substrate transition-state complex, resulting in an improvement over the all-RNA counterpart. The contribution of the 2'-OHs to the catalytic mechanism is discussed, and differences with the crystal structure of a genomic delta self-cleaved product are explained. Clearly, the 2'-OHs are essential components of the network of interactions involved in the formation of the catalytic center of the delta ribozyme.     

Examination of the folding pathway of the antigenomic hepatitis delta virus ribozyme reveals key interactions of the L3 loop

With the goal of gaining insight into the tertiary structure of the hepatitis delta virus ribozyme, cross-linking experiments using 4-thiouridine residues introduced in either the 5'-end portion of the substrate, or at seven strategic positions within the ribozyme, were performed. Mapping of the newly formed covalent bonds in cross-linked species obtained under various conditions, as well as using several mutated ribozymes, permitted monitoring of the formation of the ribozyme-substrate complex as the ribozyme proceeded along the folding pathway. In order to aid visualization of the tertiary structure transformation, an in silico animation of the "on" folding pathway was developed. In combination with those of the cleavage assays of structured substrates, these data shed light on the key contribution of the L3 loop in the formation of an active tertiary complex.     

Energetic contribution of non-essential 5' sequence to catalysis in a hepatitis delta virus ribozyme

Hepatitis delta virus (HDV) ribozymes employ multiple catalytic strategies to achieve overall rate enhancement of RNA cleavage. These strategies include general acid-base catalysis by a cytosine side chain and involvement of divalent metal ions. Here we used a trans-acting form of the antigenomic ribozyme to examine the contribution of the 5' sequence in the substrate to HDV ribozyme catalysis. The cleavage rate constants increased for substrates with 5' sequence alterations that reduced ground-state binding to the ribozyme. Quantitatively, a plot of activation free energy of chemical conversion versus Gibb's free energy of substrate binding revealed a linear relationship with a slope of -1. This relationship is consistent with a model in which components of the substrate immediately 5' to the cleavage site in the HDV ribozyme-substrate complex destabilize ground-state binding. The intrinsic binding energy derived from the ground-state destabilization could contribute up to 2 kcal/mol toward the total 8.5 kcal/mol reduction in activation free energy for RNA cleavage catalyzed by the HDV ribozyme.     

A Y form of hammerhead ribozyme trapped by photo-cross-links retains full cleavage activity.

The conformation in solution of a small bipartite I-III hammerhead ribozyme has been deduced from the photo-crosslinks formed between cleavable ribo-deoxysubstrates appropriately substituted with the probe deoxy-4-thiouridine and ribozyme residues. The ribozyme-substrate complex is able to adopt a Y-like structure with stems I and II in close proximity in the presence of 400 mM Na+ only. Indeed, a cross-link joining stem I (1.6) to loop II (AL2.4) forms in significant amount under these conditions. This cross-linked complex furthermore elicits, upon Mg2+ addition, a catalytic activity similar to that exhibited by the complexes cross-linked at the distal ends of either stem I or stem III or of the non-substituted bipartite complex. This shows that the reaction mechanism is fully compatible with a strong structural constraint between stems I and II and that sodium ions at high concentration (400 mM) are able to promote a proper folding of hammerhead ribozymes. None of the multiple cross-links formed within the ribozyme core (probe in position 16.1 or 1.1) was found catalytically active. The cross-link patterns nevertheless indicate a higher flexibility of the core in Na+ than in Mg2+. While most of the cross-links can be accommodated by the Y solution structure, some of them (16.1 to U4 and 2.1) definitely can not, suggesting that additional alternative inactive conformations exist in solution.     

Monitoring of an RNA Multistep Folding Pathway by Isothermal Titration Calorimetry

Isothermal titration calorimetry was used to monitor the energetic landscape of a catalytic RNA, specifically that of the hepatitis delta virus ribozyme. Using mutants that isolated various tertiary interactions, the thermodynamic parameters of several ribozyme-substrate intermediates were determined. The results shed light on the impact of several tertiary interactions on the global structure of the ribozyme. In addition, the data indicate that the formation of the P1.1 pseudoknot is the limiting step of the molecular mechanism. Last, as illustrated here, isothermal titration calorimetry appears to be a method of choice for the elucidation of an RNA's folding pathway.     

UV cross-link mapping of the substrate-binding site of an RNase P ribozyme to a target mRNA sequence.

RNase P ribozyme cleaves an RNA helix that resembles the acceptor stem and T-stem structure of its natural ptRNA substrate. When covalently linked with a guide sequence, the ribozyme can function as a sequence-specific endonuclease and cleave any target RNA sequences that base pair with the guide sequence. Using a site-directed ultraviolet (UV) cross-linking approach, we have mapped the regions of the ribozyme that are in close proximity to a substrate that contains the mRNA sequence encoding thymidine kinase of human herpes simplex virus 1. Our data suggest that the cleavage site of the mRNA substrate is positioned at the same regions of the ribozyme that bind to the cleavage site of a ptRNA. The mRNA-binding domains include regions that interact with the acceptor stem and T-stem and in addition, regions that are unique and not in close contact with a ptRNA. Identification of the mRNA-binding site provides a foundation to study how RNase P ribozymes achieve their sequence specificity and facilitates the development of gene-targeting ribozymes.     

The kinetics and magnesium requirements for the folding of antigenomic delta ribozymes

Using an oligonucleotide hybridization assay to gain insight into the folding of delta ribozymes, we demonstrate a correlation between their folding and catalytic behavior. Together with recent structural information on the crystal structure of self-cleaved genomic delta ribozyme, in which the L3 loop interacts with J1/4 to form the newly proposed stem P1.1, we conclude that it is likely that the P1.1 stem forms only in the presence of Mg(2+). This stem can be detected in both the self-cleaved and trans-acting delta ribozymes. When the trans-acting version of antigenomic delta ribozyme was studied, it is demonstrated that its L3 loop requires magnesium and, apparently, formation of the P1 stem for the subsequently formation of the P1.1 stem. Most importantly, the kinetics were monitored, and provide a significant addition to our understanding of ribozyme tertiary structure formation prior to the chemical cleavage step. Using previous kinetic data and our new findings, we discuss the rate-limiting characteristics of delta ribozyme folding.     

Alignment of the two domains of the hairpin ribozyme-substrate complex defined by interdomain photoaffinity crosslinking

The hairpin ribozyme-substrate complex contains two independently folding domains that interact with one another to form a catalytic complex. However, little is known about the key structural elements involved in these tertiary interactions. Here, we report the use of a photochemical crosslinking method to investigate the relative proximity and orientation of the two domains of the hairpin ribozyme. This method allows the incorporation of a photochemical azidophenacyl group at specified positions within synthetic oligoribonucleotides. Photocrosslinking was performed following the assembly of four RNA oligonucleotides into active ribozyme-substrate complexes. Two photoagent attachment sites in the substrate binding strand within domain A (between positions A7-G8 and A10-G11) and three in the 5' strand of domain B (A20-G21, A22-A23 and A24-C25) were studied. Several crosslinks between the substrate binding strand and the 5' segment of domain B were detected. All of the photo agent-specific crosslinked species were dependent upon proper assembly and folding of the ribozyme-substrate complex. In addition, a substrate base mutation (G+1 to A+1) that prevents the docking of the two domains, blocks the crosslink formation. Four interdomain crosslinks (A7-G8/C25-A26 (two species); A10-G11/A22 and A24-C25/C12-G13) have been shown to retain catalytic activity. Taken together, these results indicate that the characterized crosslinks provide important information concerning the alignment of the two domains and accurately reflect the active docked conformation of the molecule.     

Helix P4 is a divalent metal ion binding site in the conserved core of the ribonuclease P ribozyme

The ribonuclease P ribozyme (RNase P RNA), like other large ribozymes, requires magnesium ions for folding and catalytic function; however, specific sites of metal ion coordination in RNase P RNA are not well defined. To identify and characterize individual nucleotide functional groups in the RNase P ribozyme that participate in catalytic function, we employed self-cleaving ribozyme-substrate conjugates that facilitate measurement of the effects of individual functional group modifications. The self-cleavage rates and pH dependence of two different ribozyme-substrate conjugates were determined and found to be similar to the single turnover kinetics of the native ribozyme. Using site-specific phosphorothioate substitutions, we provide evidence for metal ion coordination at the pro-Rp phosphate oxygen of A67, in the highly conserved helix P4, that was previously suggested by modification-interference experiments. In addition, we detect a new metal ion coordination site at the pro-Sp phosphate oxygen of A67. These findings, in combination with the proximity of A67 to the pre-tRNA cleavage site, support the conclusion that an important role of helix P4 in the RNase P ribozyme is to position divalent metal ions that are required for catalysis.     

Impact of an extruded nucleotide on cleavage activity and dynamic catalytic core conformation of the hepatitis delta virus ribozyme

The self-cleaving hepatitis delta virus (HDV) ribozyme is essential for the replication of HDV, a liver disease causing pathogen in humans. The catalytically critical nucleotide C75 of the ribozyme is buttressed by a trefoil turn pivoting around an extruded G76. In all available crystal structures, the conformation of G76 is restricted by stacking with G76 of a neighboring molecule. To test whether this crystal contact introduces a structural perturbation into the catalytic core, we have analyzed approximately 200 ns of molecular dynamics (MD) simulations. In the absence of crystal packing, the simulated G76 fluctuates between several conformations, including one wherein G76 establishes a perpendicular base quadruplet in the major groove of the adjacent P1 stem. Second-site mutagenesis experiments suggest that the identity of the nucleotide in position 76 (N76) indeed contributes to the catalytic activity of a trans-acting HDV ribozyme through its capacity for hydrogen bonding with P1. By contrast, in the cis-cleaving genomic ribozyme the functional relevance of N76 is less pronounced and not correlated with the P1 sequence. Terbium(III) footprinting and additional MD show that the activity differences between N76 mutants of this ribozyme are related instead to changes in average conformation and modified cross-correlations in the trefoil turn.     

Identification of adenosine functional groups involved in substrate binding by the ribonuclease P ribozyme

The RNA component of bacterial ribonuclease P (RNase P) binds to substrate pre-tRNAs with high affinity and catalyzes site-specific phosphodiester bond hydrolysis to generate the mature tRNA 5' end. Herein we describe the use of biotinylated pre-tRNA substrates to isolate RNase P ribozyme-substrate complexes for nucleotide analogue interference mapping of ribozyme base functional groups involved in substrate recognition. By using a series of adenosine base analogues tagged with phosphorothioate substitutions, we identify specific chemical groups involved in substrate binding. Only 10 adenosines in the Escherichia coli ribozyme show significant sensitivity to interference: A65, A66, A136, A232-234, A248, A249, A334, and A347. Most of these adenosine positions are universally conserved among all bacterial RNase P RNAs; however, not all conserved adenosines are sensitive to analogue substitution. Importantly, all but one of the sensitive nucleotides are located at positions of intermolecular cross-linking between the ribozyme and the substrate. One site of interference that did not correlate with available structural data involved A136 in J11/12. To confirm the generality of the results, we repeated the interference analysis of J11/12 in the Bacillus subtilis RNase P ribozyme, which differs significantly in overall secondary structure. Notably, the B. subtilis ribozyme shows an identical interference pattern at the position (A191) that is homologous to A136. Furthermore, mutation of A136 in the E. coli ribozyme gives rise to a measurable increase in the equilibrium binding constant for the ribozyme-substrate interaction, while mutation of a nearby conserved nucleotide (A132) that is not sensitive to analogue incorporation does not. These results strongly support direct participation of nucleotides in the P4, P11, J5/15, and J18/2 regions of ribozyme structure in pre-tRNA binding and implicate an additional region, J11/12, as involved in substrate recognition. In aggregate, the interference results provide a detailed chemical picture of how the conserved nucleotides adjacent to the pre-tRNA substrate contribute to substrate binding and provide a framework for subsequent identification of the specific roles of these chemical groups in substrate recognition.     

Interaction of structural modules in substrate binding by the ribozyme from Bacillus subtilis RNase P.

The ribozyme from bacterial ribonuclease P recognizes two structural modules in a tRNA substrate: the T stem-loop and the acceptor stem. These two modules are connected through a helical linker. The T stem-loop binds at a surface confined in a folding domain away from the active site. Substrates for the Bacillus subtilis RNase P RNA were previously selected in vitro that are shown to bind comparably well or better than a tRNA substrate. Chemical modification of P RNA-substrate complexes with dimethylsulfate and kethoxal was performed to determine how the P RNA recognizes three in vitro selected substrates. All three substrates bind at the surface known to interact with the T stem-loop of tRNA. Similar to a tRNA, the secondary structure of these substrates contains a helix around the cleavage site and a hairpin loop at the corresponding position of the T stem-loop. Unlike a tRNA, these two structural modules are connected through a non-helical linker. The two structural modules in the tRNA and in the selected substrates bind to two different domains in P RNA. The properties of substrate recognition exhibited by this ribozyme may be exploited to isolate new ribozyme-substrate pairs with interactive structural modules.     

Base pairing between Escherichia coli RNase P RNA and its substrate.

Base pairing between the substrate and the ribozyme has previously been shown to be essential for catalytic activity of most ribozymes, but not for RNase P RNA. By using compensatory mutations we have demonstrated the importance of Watson-Crick complementarity between two well-conserved residues in Escherichia coli RNase P RNA (M1 RNA), G292 and G293, and two residues in the substrate, +74C and +75C (the first and second C residues in CCA). We suggest that these nucleotides base pair (G292/+75C and G293/+74C) in the ribozyme-substrate complex and as a consequence the amino acid acceptor stem of the precursor is partly unfolded. Thus, a function of M1 RNA is to anchor the substrate through this base pairing, thereby exposing the cleavage site such that cleavage is accomplished at the correct position. Our data also suggest possible base pairing between U294 in M1 RNA and the discriminator base at position +73 of the precursor. Our findings are also discussed in terms of evolution.     

Detailed analysis of stem I and its 5' and 3' neighbor regions in the trans-acting HDV ribozyme.

To determine the stem I structure of the human hepatitis delta virus (HDV) ribozyme, which is related to the substrate sequence in the trans -acting system, we kinetically studied stem I length and sequences. Stem I extension from 7 to 8 or 9 bp caused a loss of activity and a low amount of active complex with 9 bp in the trans -acting system. In a previous report, we presented cleavage in a 6 bp stem I. The observed reaction rates indicate that the original 7 bp stem I is in the most favorable location for catalytic reaction among the possible 6-8 bp stems. To test base specificity, we replaced the original GC-rich sequence in stem I with AU-rich sequences containing six AU or UA base pairs with the natural +1G.U wobble base pair at the cleavage site. The cis -acting AU-rich molecules demonstrated similar catalytic activity to that of the wild-type. In trans -acting molecules, due to stem I instability, reaction efficiency strongly depended on the concentration of the ribozyme-substrate complex and reaction temperature. Multiple turnover was observed at 37 degreesC, strongly suggesting that stem I has no base specificity and more efficient activity can be expected under multiple turnover conditions by substituting several UA or AU base pairs into stem I. We also studied the substrate damaging sequences linked to both ends of stem I for its development in therapeutic applications and confirmed the functions of the unique structure.     

Oligonucleotide facilitators may inhibit or activate a hammerhead ribozyme.

Facilitators are oligonucleotides capable of affecting hammerhead ribozyme activity by interacting with the substrate at the termini of the ribozyme. Facilitator effects were determined in vitro using a system consisting of a ribozyme with 7 nucleotides in every stem sequence and two substrates with inverted facilitator binding sequences. The effects of 9mer and 12mer RNA as well as DNA facilitators which bind either adjacent to the 3'- or 5'-end of the ribozyme were investigated. A kinetic model was developed which allows determination of the apparent dissociation constant of the ribozyme-substrate complex from single turnover reactions. We observed a decreased dissociation constant of the ribozyme-substrate complex due to facilitator addition corresponding to an additional stabilization energy of delta delta G=-1.7 kcal/mol with 3'-end facilitators. The cleavage rate constant was increased by 3'-end facilitators and decreased by 5'-end facilitators. Values for Km were slightly lowered by all facilitators and kcat was increased by 3'-end facilitators and decreased by 5'-end facilitators in our system. Generally the facilitator effects increased with the length of the facilitators and RNA provided greater effects than DNA of the same sequence. Results suggest facilitator influences on several steps of the hammerhead reaction, substrate association, cleavage and dissociation of products. Moreover, these effects are dependent in different manners on ribozyme and substrate concentration. This leads to the conclusion that there is a concentration dependence whether activation or inhibition is caused by facilitators. Conclusions are drawn with regard to the design of hammerhead ribozyme facilitator systems.     

Delta ribozyme benefits from a good stability in vitro that becomes outstanding in vivo

The stability of a trans-acting delta ribozyme was studied under various conditions. Although in vitro (i.e., in the presence of protein extracts) this delta ribozyme appears to be only slightly more stable than a hammerhead ribozyme, in vivo (i.e., after cell transfection) it exhibits an outstanding stability that manifests itself in the calculated half-life of over 100 h regardless of the means of transfection. The P2 stem, which includes both the 5' and 3' ends, is shown to play a critical role in this stability. Direct mutagenesis of the most nuclease susceptible nucleotides failed to generate a more stable ribozyme that retained the same catalytic potential. Clearly, delta ribozyme appears to be well adapted to the human cell environment, and is therefore ideal for the development of a gene-inactivation system.     

Essential nucleotide sequences and secondary structure elements of the hairpin ribozyme.

In vitro selection experiments have been used to isolate active variants of the 50 nt hairpin catalytic RNA motif following randomization of individual ribozyme domains and intensive mutagenesis of the ribozyme-substrate complex. Active and inactive variants were characterized by sequencing, analysis of RNA cleavage activity in cis and in trans, and by substrate binding studies. Results precisely define base-pairing requirements for ribozyme helices 3 and 4, and identify eight essential nucleotides (G8, A9, A10, G21, A22, A23, A24 and C25) within the catalytic core of the ribozyme. Activity and substrate binding assays show that point mutations at these eight sites eliminate cleavage activity but do not significantly decrease substrate binding, demonstrating that these bases contribute to catalytic function. The mutation U39C has been isolated from different selection experiments as a second-site suppressor of the down mutants G21U and A43G. Assays of the U39C mutation in the wild-type ribozyme and in a variety of mutant backgrounds show that this variant is a general up mutation. Results from selection experiments involving populations totaling more than 10(10) variants are summarized, and consensus sequences including 16 essential nucleotides and a secondary structure model of four short helices, encompassing 18 bp for the ribozyme-substrate complex are derived.