Conformational changes expected in endogenous opioid peptides upon their interaction with acidic lipids

The amino terminal amino acid sequence of purified human angiotensinogen has been determined. The first 25 residues with the exception of number 14 were identified. The sequence of the first ten amino acids is that of angiotensin I. The sequence surrounding the renin cleavage site in this protein is Leu-¹⁰Val-¹¹Ile-¹²His-¹³. Thus, human renin must cleave a Leu-Val peptide bond in human angiotensinogen to release angiotensin I, rather than a Leu-Leu bond as reported for other species. The differences between the sequence of human angiotensinogen and that previously reported for a tetradecapeptide derived from equine and porcine angiotensinogen may be responsible for the known species specificity of renin.     

Identification of the active site of human renin with use of new fluorogenic peptides

Fluorogenic peptide substrates were synthesized in which amino acid residues corresponded to the C-terminal and the N-terminal sides of the site of human angiotensinogen cleaved by renin. Compared with the synthetic substrates of renin previously reported, these fluorogenic substrates had practical advantages in that their digestion products could be rapidly separated and sensitively detected by high-pressure liquid chromatography with a fluorescence detector. The recombinant human renin and human plasma split Leu-Val, which cleavage site is similar to that in human angiotensinogen. The kinetic parameters of the reaction of renin using these substrates were calculated. There seemed to be at least eight subsites in the active site of recombinant human renin, to judge from the enzyme-substrate binding characteristics. The two histidine residues (S5 and S'3) in the octapeptide His-Pro-Phe-His-Leu-Val-Ile-His were important in the enzyme action.     

Determination of peptide substrate specificity for mu-calpain by a peptide library-based approach: the importance of primed side interactions

Calpains are proteases that catalyze the limited cleavage of target proteins in response to Ca(2+) signaling. Because of their involvement in pathological conditions such as post-ischemic injury and Alzheimer and Parkinson disease, calpains form a class of pharmacologically significant targets for inhibition. We have determined the sequence preference for the hydrolysis of peptide substrates of the ubiquitous mu-calpain isoform by a peptide library-based approach using the proteolytic core of mu-calpain (muI-II). The approach, first described by Turk et al. (Turk, B. E., Huang, L. L., Piro, E. T., and Cantley, L. C. (2001) Nat. Biotechnol. 19, 661-667), involved the digestion of an N-terminally acetylated degenerate peptide library in conjunction with Edman sequencing to determine the specificity for residues found at primed positions. The cleavage consensus for these positions was then used to design a second, partially degenerate library, to determine specificity at unprimed positions. We have improved upon the original methodology by using a degenerate peptide dendrimer for determination of specificity at unprimed positions. By using this modified approach, the complete cleavage specificity profile for muI-II was determined for all positions flanking the cleaved peptide. A previously known preference of calpains for hydrophobic amino acids at unprimed positions was confirmed. In addition, a novel residue specificity for primed positions was revealed to highlight the importance of these sites for substrate recognition. The optimal primed site motif (MER) was shown to be capable of directing cleavage to a specific peptide bond. Accordingly, we designed a fluorescent resonance energy transfer-based substrate with optimal cleavage motifs on the primed and non-primed sides (PLFAER). The mu-calpain core shows a far greater turnover rate for our substrate than for those based on the cleavage site of alpha-spectrin or the proteolytic sequence consensus compiled from substrate alignments.     

Specificity of the dynorphin-processing endoprotease: comparison with prohormone convertases

The cleavage specificity of a monobasic processing dynorphin converting endoprotease is examined with a series of quench fluorescent peptide substrates and compared with the cleavage specificity of prohormone convertases. A dynorphin B-29-derived peptide, Abz-Arg-Arg-Gln-Phe-Lys-Val-Val-Thr-Arg-Ser-Glneddnp (where Abz is o-aminobenzoyl and eddnp is ethylenediamine 2,4-dinitrophenyl), that contains both dibasic and monobasic cleavage sites is efficiently cleaved by the dynorphin converting enzyme and not cleaved by two propeptide processing enzymes, furin and prohormone convertase 1. A shorter prorenin-related peptide, Dnp-Arg-Met-Ala-Arg-Leu-Thr-Leu-eddnp, that contains a monobasic cleavage site is cleaved by the dynorphin converting enzyme and prohormone convertase 1 and not by furin. Substitution of the P1' position by Ala moderately affects cleavage by the dynorphin-processing enzyme and prohormone convertase 1. It is interesting that this substitution results in efficient cleavage by furin. The site of cleavage, as determined by matrix-assisted laser desorption/ionization time of flight mass spectrometry, is N-terminal to the Arg at the P1 position for the dynorphin converting enzyme and C-terminal to the Arg at the P1 position for furin and prohormone convertase 1. Peptides with additional basic residues at the P2 and at P4 positions also serve as substrates for the dynorphin converting enzyme. This enzyme cleaves shorter peptide substrates with significantly lower efficiency as compared with the longer peptide substrates, suggesting that the dynorphin converting enzyme prefers longer peptides that contain monobasic processing sites as substrates. Taken together, these results suggest that the cleavage specificity of the dynorphin converting enzyme is distinct but related to the cleavage specificity of the prohormone convertases and that multiple enzymes could be involved in the processing of peptide hormones and neuropeptides at monobasic and dibasic sites.     

Identification of residues involved in v-Src substrate recognition by site-directed mutagenesis.

To study the role of the catalytic domain in v-Src substrate specificity, we engineered three site-directed mutants (Leu-472 to Tyr or Trp and Thr-429 to Met). The mutant forms of Src were expressed in Sf9 cells and purified. We analyzed the substrate specificities of wild-type v-Src and the mutants using two series of peptides that varied at residues C-terminal to tyrosine. The peptides contained either the YMTM motif found in insulin receptor substrate-1 (IRS-1) or the YGEF motif identified from peptide library experiments to be the optimal sequence for Src. Mutations at positions Leu-472 or Thr-429 caused changes in substrate specificity at positions P+1 and P+3 (i.e. one or three residues C-terminal to tyrosine). This was particularly evident in the case of the L-472W mutant, which had pronounced alterations in its preferences at the P+1 position. The results suggest that residue Leu-472 plays a role in P+1 substrate recognition by Src. We discuss the results in the light of recent work on the roles of the SH2, SH3 and catalytic domains of Src in substrate specificity.     

The amino-acid residues on the C-terminal side of the cleavage site of angiotensinogen influence the species specificity of reaction with renin

The N-terminal sequences of human and canine angiotensinogen and two hybrid sequences were synthesized and used to determine whether the species specificity of renin is influenced by amino-acid residues adjacent to the cleavage site. kcat/Km for the generation of angiotensin I from the N-terminal tridecapeptide of human angiotensinogen by canine renin is 0.37% of that observed when the N-terminal tetradecapeptide from canine angiotensinogen is used as a substrate. Replacement of the valine residue at P'1 in the human tridecapeptide with the leucine residue from the canine sequence triples kcat and improves Km 4-fold. Replacement of isoleucine residue at P'2 with the valine residue from the canine sequence enhances Km 8-fold. Substitution of the histidine residue at P'3 with the tyrosine serine sequence of canine angiotensinogen increases kcat an order of magnitude. Results obtained with the synthetic substrate are similar to those observed with the protein substrates. Canine renin does not cleave human angiotensinogen. Also, kcat/Km of canine renin for its homologous substrate is about 6-times greater than the kcat/Km value for human renin acting on human angiotensinogen.     

Dissection of the energetic coupling across the Src SH2 domain-tyrosyl phosphopeptide interface

Src Homology (SH2) domains play critical roles in signaling pathways by binding to phosphotyrosine (pTyr)-containing sequences, thereby recruiting SH2 domain-containing proteins to tyrosine-phosphorylated sites on receptor molecules. Investigations of the peptide binding specificity of the SH2 domain of the Src kinase (Src SH2 domain) have defined the EEI motif C-terminal to the phosphotyrosine as the preferential binding sequence. A subsequent study that probed the importance of eight specificity-determining residues of the Src SH2 domain found two residues which when mutated to Ala had significant effects on binding: Tyr beta D5 and Lys beta D3. The mutation of Lys beta D3 to Ala was particularly intriguing, since a Glu to Ala mutation at the first (+1) position of the EEI motif (the residue interacting with Lys beta D3) did not significantly affect binding. Hence, the interaction between Lys beta D3 and +1 Glu is energetically coupled. This study is focused on the dissection of the energetic coupling observed across the SH2 domain-phosphopeptide interface at and around the +1 position of the peptide. It was found that three residues of the SH2 domain, Lys beta D3, Asp beta C8 and AspCD2 (altogether forming the so-called +1 binding region) contribute to the selection of Glu at the +1 position of the ligand. A double (Asp beta C8Ala, AspCD2Ala) mutant does not exhibit energetic coupling between Lys beta D3 and +1 Glu, and binds to the pYEEI sequence 0.3 kcal/mol tighter than the wild-type Src SH2 domain. These results suggest that Lys beta D3 in the double mutant is now free to interact with the +1 Glu and that the role of Lys beta D3 in the wild-type is to neutralize the acidic patch formed by Asp beta C8 and AspCD2 rather than specifically select for a Glu at the +1 position as it had been hypothesized previously. A triple mutant (Lys beta D3Ala, Asp beta C8Ala, AspCD2Ala) has reduced binding affinity compared to the double (Asp beta C8Ala, AspCD2Ala) mutant, yet binds the pYEEI peptide as well as the wild-type Src SH2 domain. The structural basis for such high affinity interaction was investigated crystallographically by determining the structure of the triple (Lys beta D3Ala, Asp beta C8Ala, AspCD2Ala) mutant bound to the octapeptide PQpYEEIPI (where pY indicates a phosphotyrosine). This structure reveals for the first time contacts between the SH2 domain and the -1 and -2 positions of the peptide (i.e. the two residues N-terminal to pY). Thus, unexpectedly, mutations in the +1 binding region affect binding of other regions of the peptide. Such additional contacts may account for the high affinity interaction of the triple mutant for the pYEEI-containing peptide.     

Modification of the substrate specificity of porcine pepsin for the enzymatic production of bovine hide gelatin

The substrate specificity of porcine pepsin has been altered by site-directed mutagenesis in an attempt to selectively cleave bovine hide collagen at only a few sites, similar to cathepsin D, for the production of high quality gelatin. Kinetic parameters were determined using chromogenic peptide substrates based on the sequence Lys-Pro-Xaa-Yaa-Phe*Nph-Arg-Leu (where Xaa is Ile or Pro, Yaa is Glu. Leu, Gln or Lys, Nph is p-nitrophenylalanine, and * is the site of cleavage). Substitution of Thr222 and Glu287 within the S2 subsite of pepsin by Val and Met, respectively, produced a double mutant with a two- to fourfold higher kcat/Km, compared with wild-type pepsin, for the chromogenic peptides with residues Leu, Gln, and Glu at position P2 (Yaa). The results suggest that the functional group of the P2 side chain may be exposed to solvent, while the aliphatic portion interacts with hydrophobic residues comprising S2. Wild-type pepsin cleaved a peptide corresponding to the carboxy-terminal telopeptide region of bovine type I collagen alpha1 chain, SGGYDLSFLPQPPQE, predominantly at three sites (Asp-Leu, Leu-Ser, and Phe-Leu) and at a significantly lower rate at Ser-Phe. However, Thr222Val/Glu287Met cleaved site Ser-Phe at a rate 20-fold higher than the wild-type. Significantly, enzymes containing the double substitution Phe111Thr/Leu112Phe cleaved this peptide predominantly at one site Leu-Ser (similar to cathepsin D) and at a rate 23-fold higher than the wild-type. These mutants can potentially enhance the rate of solubilization of bovine hide collagen under conditions mild enough to maintain the triple helix structure and hence minimize the rate of subsequent denaturation and proteolytic cleavage.     

C-terminal specific protein degradation: activity and substrate specificity of the Tsp protease.

The activity of Tsp, a periplasmic endoprotease of Escherichia coli, has been characterized by assaying the cleavage of protein and peptide substrates, determining the cleavage sites in several substrates, and investigating the kinetics of the cleavage reaction. Tsp efficiently cleaves substrates that have apolar residues and a free alpha-carboxylate at the C-terminus. Tsp cleaves its substrates at a discrete number of sites but with rather broad primary sequence specificity. In addition to preferences for residues at the C-terminus and cleavage sites, Tsp displays a preference for substrates that are not stably folded: unstable variants of Arc repressor are better substrates than a hyperstable mutant, and a peptide with little stable structure is cleaved more efficiently than a protein substrate. These data are consistent with a model in which Tsp cleavage of a protein substrate involves binding to the C-terminal tail of the substrate, transient denaturation of the substrate, and then recognition and hydrolysis of specific peptide bonds.     

Cleavage specificity of the subtilisin-like protease C1 from soybean

The cleavage specificity of protease C1, isolated from soybean (Glycine max (L.) Merrill) seedling cotyledons, was examined using oligopeptide substrates in an HPLC based assay. A series of peptides based on the sequence Ac-KVEKEESEEGE-NH2 was used, mimicking a natural cleavage site of protease C1 in the alpha subunit of the storage protein beta-conglycinin. A study of substrate peptides truncated from either the N- or C-terminus indicates that the minimal requirements for cleavage by protease C2 are three residues N-terminal to the cleaved bond, and two residues C-terminal (i.e. P3-P2'). The maximal rate of cleavage is reached with substrates containing four to five residues N-terminal to the cleaved bond and four residues C-terminal (i.e. P4 or P5 to P4'). The importance of Glu residues at the P1, P1', and P4 positions was examined using a series of substituted nonapeptides (P5-P4') with a base sequence of Ac-KVEKEESEE-NH2. At the P1 position, the relative ranking, based on kcat/Km, was E>Q>K>A>D>F>S. Substitutions at the P1' position yield the ranking E congruent withQ>A>S>D>K>F, while those at P4' had less effect on kcat/Km, yielding the ranking F congruent with S congruent with E congruent withD>K>A congruent withQ. These data show that protease C1 prefers to cleave at Glu-Glu and Glu-Gln bonds, and that the nature of the P4' position is less important. The fact that there is specificity in the cleavage of the oligopeptides suggests that the more limited specific cleavage of the alpha and alpha' subunits of beta-conglycinin by protease C1 is due to a combination of the sequence cleavage specificity of the protease and the accessibility of appropriate scissile peptide bonds on the surface of the substrate protein.     

Cloning, characterization and site-directed mutagenesis of canine renin

Inhibition of renin has been shown to be successful in managing hypertension and maintaining cardiac health. Canine models have played a key role in preclinical assessment of renin inhibitors. Here we report the cloning of canine prorenin gene. The amino acid sequence of mature canine renin was approximately 70% identical to that of human renin. The full-length prorenin was expressed in HEK 293 cells, purified and converted to its active form by trypsin-mediated cleavage of the 43 residue propeptide. The mature enzyme was characterized by steady-state kinetics using a peptide corresponding to the canine angiotensinogen sequence, Ac-Asp-Arg-Val-Tyr-Ile-His-Pro-Phe-His-Leu-Leu-Val-Tyr-Ser-OH (cleavage between Leu(10)-Leu(11)). The reaction followed Michaelis-Menten kinetics with a K(M) of 120 microM and a second-order rate constant (k(cat)/K(M)) of 1.7 x 10(5) M(-)(1)s(-)(1). The enzyme was inhibited by various human renin inhibitors, but at reduced potency compared to the human renin. The basis of the species specificity was investigated by mutagenesis. Based on primary sequence and structural alignments, three mutants were prepared (G149S-S150T, V286L, G149S-S150T-V286L). Each mutant yielded catalytically active enzymes with lower specific activities than native canine renin. V286L had the greatest effect on substrate specificity, while G149S, S150T mutations produced enzymes with inhibitor profiles similar to human renin.     

Deletion of the four C-terminal residues of PepC converts an aminopeptidase into an oligopeptidase.

The aminopeptidase PepC is a cysteine peptidase isolated from lactic acid bacteria. Its structural and enzymatic properties closely resembles those of the bleomycin hydrolases, a group of cytoplasmic enzymes isolated from eukaryotes. Previous biochemical and structural data have shown that the C-terminal end of PepC partially occupies the active site cleft. In this work the substrate specificity of PepC was engineered by deletion of the four C-terminal residues. The mutant PepCDelta432-435 cleaved peptide substrates as an oligopeptidase while the aminopeptidase specificity was totally abolished. The substrate size dependency indicated that PepCDelta432-435 possesses an extended binding site able to accommodate four residues of the substrate on both sides of the cleaved bond. The activity of PepCDelta432-435 towards tryptic fragments of casein revealed a preference for peptides with hydrophobic amino acids at positions P2 and P3 and for Gly, Asn and Gln at position P1. PepCDelta432-435 was shown to be highly sensitive to the thiol peptidase inhibitors leupeptin or E64 which are inefficient towards the wild-type PepC. In conclusion, deletion of the four C-terminal residues in PepC produces a new enzyme with properties resembling those of an endopeptidase from the papain family.     

Ser84 of human renin contributes to the biphasic pH dependence of the renin-angiotensinogen reaction

The pH dependence of the reaction of various renins was investigated using sheep angiotensinogen as a substrate. Human renin showed two separate peaks, but rat and mouse Ren1 renins showed one peak with a shoulder. A comparison of the predicted subsite residues of human renin with those of rat and mouse Ren1 renins revealed that Arg82, Ser84, Thr85, Ala229, and Thr312 are unique in the human sequence. We examined the possible importance of these residues in the unique pH profile of the human renin reaction by replacing these residues with the corresponding residues of rat renin. The replacement of Ser84 of human renin with Gly changed the pH dependence of the reaction to one peak, similarly to rat and mouse Ren1 renins. Other mutant human renins kept two separate peaks, similarly to wild-type human renin. These results indicate that Ser84 of human renin contributes to the biphasic pH dependence of the renin-angiotensinogen reaction.     

Mercurial activation of human PMN leucocyte type IV procollagenase (gelatinase).

Autoproteolytic activation and processing of human polymorphonuclear leucocyte (PMNL) type IV procollagenase (gelatinase) was initiated by HgCl2 and was investigated by kinetic analysis and N-terminal sequence determination of the reaction products. In the first instance the propeptide domain was lost by subsequent cleavage of the Asp15-Leu16, Glu40-Met41, Leu52-Leu53 and Ala74-Met75 peptide bonds. The PRCGVPD sequence motif (residues Pro78-Asp84), which is conserved in all metalloproteinases and expected to be relevant for latency, remained uncleaved at the activated enzyme. The generated intermediate was further processed by three C-terminal cleavages. The Glu666-Leu667, Ala506-Glu507 and Ala398-Leu399 bonds were hydrolysed successively. From the fragmentation products we were able to conclude that three released fragment peptides contained unpaired free cysteine with the residues Cys497, Cys653, Cys683. Cleavage of the first C-terminal peptide bond resulted in the loss of one of the conserved Cys residues of the hemopexin-like domain, whereas the Cys residue of the PRCGVPD motif was retained at the fully active enzyme. The possibility of an entirely different activation mechanism for PMNL type IV procollagenase is discussed.     

Mass spectrometric identification of the trypsin cleavage pathway in lysyl-proline containing oligotuftsin peptides.

Trypsin cleaves specifically peptide bonds at the C-terminal side of lysine and arginine residues, except for -Arg-Pro- and -Lys-Pro- bonds which are normally resistant to proteolysis. Here we report evidence for a -Lys-Pro- tryptic cleavage in modified oligotuftsin derivatives, Ac-[TKPKG]4-NH2) (1), using high-resolution mass spectrometry and HPLC as primary methods for analysis of proteolytic reactions. The proteolytic susceptibility of -Lys-Pro- bonds was strongly dependent on flanking residues, and the flexibility of the peptide backbone might be a prerequisite for this unusual cleavage. While -Lys-Gly- bonds in 1 were rapidly cleaved, the modification of these Lys residues by the attachment of a ss-amyloid(4-10) epitope to yield -Lys(X)-Gly derivatives prevented cleavage of this bond, and provided trypsin cleavage of -Lys-Pro- bonds, the pathway of this degradation being independent on the type of Lys-N(epsilon)-side chains (acetyl group, amino acid, peptide). Substitution of the Lys residues by Ala at the P'2 positions decreased the tryptic cleavage, while replacement of the bulky side chain of Thr at the P2 positions strongly increased the cleavage of -Lys-Pro- bonds. Circular dichroism (CD) data of the modified oligotuftsin derivatives are in accord with enhanced flexibility of the peptide backbone, as a prerequisite for increased susceptibility to cleavage of -Lys-Pro- bonds. These results obtained of oligotuftsin derivatives might have implications for the proteolytic degradation of target peptides that require specific conformational preconditions.     

Calorimetric examination of high-affinity Src SH2 domain-tyrosyl phosphopeptide binding: dissection of the phosphopeptide sequence specificity and coupling energetics

SH2 domains are protein modules which interact with specific tyrosine phosphorylated sequences in target proteins. The SH2 domain of the Src kinase binds with high affinity to a tyrosine phosphorylated peptide containing the amino acids Glu, Glu, and Ile (EEI) at the positions +1, +2, and +3 C-terminal to the phosphotyrosine, respectively. To investigate the degree of selectivity of the Src SH2 domain for each amino acid of the EEI motif, the binding thermodynamics of a panel of substitutions at the +1 (Gln, Asp, Ala, Gly), +2 (Gln, Asp, Ala, Gly), and +3 (Leu, Val, Ala, Gly) positions were examined using titration microcalorimetry. It was revealed that the Src SH2 domain is insensitive (DeltaDeltaG degrees 相似文献   

Purification, characterization and substrate specificity of a basic proteinase in the venom of habu (Trimeresurus flavoviridis)

A basic proteinase was purified and characterized from the venom of Habu (Trimeresurus flavoviridis). Its molecular weight, isoelectric point and optimum pH were approx. 24,000, 9.2 and 9, respectively. Susceptibility to several reagents was examined. The proteinase had endopeptidase activity cleaving the Gly-Leu bond in synthetic peptides but no exopeptidase activity. It did not hydrolyze a peptide, Z-Gly-Pro-Leu-Gly-Pro, which had been a good substrate for the major proteinase in the venom. The proteinase cleaved oxidized insulin B chain at five positions: His10-Leu11, Ala14-Leu15, Tyr16-Leu17, Gly23-Phe24 and Phe24-Phe25. From the disappearance of intermediate peptides and the peptides accumulated, the order and the intensity of cleavage of these positions were determined, and the substrate specificity was compared with those hitherto described for hemorrhagic and nonhemorrhagic venom proteinases.     

Identification of the PXW sequence as a structural gatekeeper of the headpiece C-terminal subdomain fold

The HeadPiece (HP) domain, present in several F-actin-binding multi-domain proteins, features a well-conserved, solvent-exposed PXWK motif in its C-terminal subdomain. The latter is an autonomously folding subunit comprised of three alpha-helices organised around a hydrophobic core, with the sequence motif preceding the last helix. We report the contributions of each conserved residue in the PXWK motif to human villin HP function and structure, as well as the structural implications of the naturally occurring Pro to Ala mutation in dematin HP. NMR shift perturbation mapping reveals that substitution of each residue by Ala induces only minor, local perturbations in the full villin HP structure. CD spectroscopic thermal analysis, however, shows that the Pro and Trp residues in the PXWK motif afford stabilising interactions. This indicates that, in addition to the residues in the hydrophobic core, the Trp-Pro stacking within the motif contributes to HP stability. This is reinforced by our data on isolated C-terminal HP subdomains where the Pro is also essential for structure formation, since the villin, but not the dematin, C-terminal subdomain is structured. Proper folding can be induced in the dematin C-terminal subdomain by exchanging the Ala for Pro. Conversely, the reverse substitution in the villin C-terminal subdomain leads to loss of structure. Thus, we demonstrate a crucial role for this proline residue in structural stability and folding potential of HP (sub)domains consistent with Pro-Trp stacking as a more general determinant of protein stability.     

Identification of an ADAMTS-4 cleavage motif using phage display leads to the development of fluorogenic peptide substrates and reveals matrilin-3 as a novel substrate

ADAMTS-4 and ADAMTS-5 are aggrecanases responsible for the breakdown of cartilage aggrecan in osteoarthritis. Multiple ADAMTS-4 cleavage sites have been described in several matrix proteins including aggrecan, versican, and brevican, but no concise predictive cleavage motif has been identified for this protease. By screening a 13-mer peptide library with a diversity of 10(8), we have identified the ADAMTS-4 cleavage motif E-(AFVLMY)-X(0,1)-(RK)-X(2,3)-(ST)-(VYIFWMLA), with Glu representing P1. Several 13-mer peptides containing this motif, including DVQEFRGVTAVIR and HNEFRQRETYMVF, were shown to be substrates for ADAMTS-4. These peptides were found to be specific substrates for ADAMTS-4 as they were not cleaved by ADAMTS-5. Modification of these peptides with donor (6-FAM) and acceptor (QSY-9) molecules resulted in the development of fluorescence-based substrates with a Km of approximately 35 microM. Furthermore, the role of Glu at P1 and Phe at P1' in binding and catalysis was studied by exploring substitution of these amino acids with the D-isomeric forms. Substitution of P1 with dGlu was tolerable for binding, but not catalysis, whereas substitution of P1' with dPhe precluded both binding and catalysis. Similarly, replacement of Glu with Asp at P1 abolished recognition and cleavage of the peptide. Finally, BLAST results of the ADAMTS-4 cleavage motif identified matrilin-3 as a new substrate for ADAMTS-4. When tested, recombinant ADAMTS-4 effectively cleaved intact matrilin-3 at the predicted motif at Glu435/Ala436 generating two species of 45 and 5 kDa.     

Peptide analogues of angiotensinogen. Effect of peptide chain length on renin inhibition

Renin inhibition was evaluated for a series of peptide analogues of angiotensinogen with different chain lengths. Systematic deletion of amino acid residues from the hexapeptide BocPheHisLeuR-ValIleHisOCH3 showed that the presence of residues at the N-terminal Phe and His positions was essential for efficient enzyme-inhibitor binding whereas the C-terminal Ile and His residues were much less important. Synthesis of a tetrapeptide analogue shortened at the C-terminus and containing modified side chains produced a potent inhibitor of renin which demonstrated hypotensive activity in a salt depleted monkey.