Refinement of human lysozyme at 1.5 Å resolution analysis of non-bonded and hydrogen-bond interactions

The structure of human lysozyme has been crystallographically refined at 1.5 Å resolution by difference map and restrained least-squares procedures to an R factor of 0.187. A comprehensive analysis of the non-bonded and hydrogen-bonded contacts in the lysozyme molecule, which were not restrained, revealed by the refinement has been carried out. The non-bonded CC contacts begin at ~3.45 Å, and the shorter contacts are dominated, as expected, by interactions between trigonal and tetrahedral carbon atoms. The CO contact distances have a “foot” at 3.05 Å. The CN distance plot shows a significant peak at 3.25 Å, which results from close contact between peptide NHs and carbonyl carbons involved in N_iC′_{i ? 2} interactions in α-helices and reverse turns. The distances involving sulphur atoms discriminate SC trigonal interactions at 3.4 to 3.6 Å from SC tetrahedral interactions at 3.7 Å. All these types of non-bonded interactions show minimum distances close to standard van der Waals' separations.Analysis of hydrogen-bond distances has been carried out by using standard geometry to place hydrogen atoms and measuring the XHO distances. On this basis, there are 130 intramolecular hydrogens: 111 NHO bonds, of which 69 are between main-chain atoms, 13 between side-chain atoms and 29 between mainchain and side-chain atoms. If a cluster of four well-defined internal water molecules is included in the protein structure, there is a total of 19 OHO hydrogen bonds. The mean NO, NHO distances and HN?O angles are 2.96 ± 0.17 Å, 2.05 ± 0.18 Å and 18.5 ± 9.6 °, and the mean OO, OHO distances and HÔO angles are 2.83 ± 0.19 Å, 1.98 ± 0.26 Å and 23.8 ± 13.4 °. The distances agree well with standard values, although the hydrogen bonds are consistently more non-linear than in equivalent small molecules. An analysis of the hydrogen-bond angles at the receptor atom indicates that the α-helix, β-sheet and reverse turn have characteristic angular values. A detailed analysis of the regularity of the α-helices and reverse turns shows small but consistent differences between the α-helices in lysozyme and the current standard model, which may now need revision. Of the 21 reverse turns that include a hydrogen bond, the conformations of 19 agree very closely with four of the five standard types. We conclude that the restrained least-squares method of refinement has been validated by these analyses.     

Strong and symmetric halogen bonding in coordination compounds of carboxylic acid derivatives; the crystal structure of (3,6-dithiaoctanedioato-S,S′-(3,6-dithiaoctanedioic acid-S,S′)-copper(I) redetermined at 173 K

3,6-dithianoctanedioic acid forms a Cu(I) compound in which electrical neutrality is achieved by elaborate hydrogen bonding and sharing on protons. The title compund crystallizes in the monoclinic space group P2/n with Z = 2. Unit-cell parameters are a = 11.625(2), b = 7.664(1), c = 9.874(2) Å, β = 95.16°, D_m = 1.80(2), D_c = 1.83 g cm^?3. The structure was solved by means of standard direct methods and refined with full-matrix least-squares techniques to an R-value of 0.026 (R_w = 0.042). The Cu(I) ion is tetrahedrally coordinated by four thioether S-atoms (CuS = 2.29–2.33 Å). The molecules are linked by very strong hydrogen bonds between non-coordinating carboxylate groups in such a way that the average number of acidic hydrogens per molecule is three. One of these hydrogens lies on a twofold axis and forms a short symmetrical hydrogen bond, with a OO distance of 2.441(2) Å. Unusual features in the infrared spectrum of this compund can be interpreted on the basis of the observed crystal structure.     

Topography of cyclodextrin inclusion complexes : Part II. The iodine-cyclohexa-amylose tetrahydrate complex; its molecular geometry and cage-type crystal structure

Iodine-cyclohexa-amylose tetrahydrate [(C₆H₁₀O₅)₆ ·I₂·d4H₂O] crystallizes in the orthorhombic space-group P2₁2₁2₁, a  14.240 Å, b  36.014 Å, c  9.558 Å. The structure was solved by heavy-atom techniques and refined by least-squares methods to a conventional discrepancy index R  0.148 for the 2872 observed data. The six d-glucose residues are in the C1 chair conformation; the conformational angles vary in magnitude from 45 to 66°, the angles O(5)-C(5)-C(6)-O(6) are close to · 70°, and the six O(4) atoms are almost coplanar (r.m. s. displacement 0.13 Å). Only four of the six O(2) ?O(3) intramolecular hydrogen bonds have formed, which renders the molecule less symmetrical and more conical-shaped than in the previously determined α-cyclodextrin-potassium acetate complex. The iodine molecule is coaxial with the cyclohexa-amylose molecule. The I-I distance is a conventional 2.677 Å. Close interactions between the iodine atoms and the host molecule comprise carbon atoms C(5) and C(6) and oxygen atoms O(4), with interatomic distances all equal to or greater than van der Waals contacts. Intermolecular, almost-linear, short contacts O ? I-I?O with I?O distances of 3.22 and 3.07 Å indicate attractive interaction.The molecules are arranged in herring-bone “cage-type” fashion, with the four water molecules as space-filling mediators; the structure is held together by an intricate network of hydrogen bonds.     

Preparation,properties and crystal structures of nickel(II) complexes with acyclic schiff bases derived from 2,6-diformyl-4-chlorophenol and 1,5-diamino-3-thiapentane or 3,3′-diamino-N-methyl-dipropylamine

Nickel(II) complexes with the compartmental Schiff bases derived from 2,6-diformyl-4-chlorophenol and 1,5-diamino-3-thiapentane (H₂L¹) or 3,3′-diamino-N-methyl-dipropylamine (H₂L²) were synthesized, and the crystal structures of [Ni(L¹)- (py)₂] and [Ni(L²)(dmf)]·H₂0 were determined by X-ray crystallography.Ni(L¹)(py)₂ is monoclinic, space group C2/c, with a= 18.457(6), b = 11.116(7), c= 16.098(6) Å, and β = 115.79(5)°; D_c = 1.49 g cm⁻³ for Z = 4. The structure was refined to the final R of 6.9%. The molecule has C₂ symmetry. The nickel atom is six-coordinated octahedral. Selected bond lengths are: NiO 2.04(1) Å, NiN (L¹) 2.08(1) Å, NiN(py) 2.17(1) Å.[Ni(L²)(dmf)]·H₂O is monoclinic, space group P2₁/n, with a = 17.329(6), b = 13.322(7), c = 12.476(7) Å and β = 95.43(5)°; D_c = 1.45 g cm⁻³ for Z = 4. The structure was refined to the final R of 5.1%. The nickel atom is bonded in the octahedral geometry to the bianionic pentadentate ligand L² and to one molecule of dimethylformamide. Selected bond lengths are: NiO (charged) 2.063(3) Å (mean value), NiO (neutral) 2.120(3) Å, NiN (planar) 2.050(3) Å (mean value), NiN (tetrahedral) 2.177(3) Å.     

Metal—phenoxyalkanoic acid interactions. Part 14. The crystal and molecular structures of diaquabis(4-fluorophenoxyacetato)copper(II) bis(4-fluorophenoxyacetic acid)dihydrate and tetra-μ-(4-fluorophenoxyacetato-0,0′)-bis[(2-aminopyrimidine)copper(II)]

The crystal structures of two copper(II) complexes of 4-fluorophenoxyacetic acid (4-FPAH) have been determined by X-ray diffraction. [Cu(4-FPA)₂(H₂O)₂]·2(4-FPAH)·2H₂O (1) is triclinic, space group P1 with Z = 1 in a cell of dimensions a = 14.808(2), b = 9.832(2), c = 6.847(2) Å, α = 87.77(2), β = 98.41(2), γ = 112.33(2)° and was refined to a residual of 0.038 for 1697 ‘observed’ reflections. The coordination sphere in this complex is tetragonally distorted octahedral comprising two waters [CuO, 1.940(3) Å], two unidentate carboxylate oxygens [CuO, 1.942(2) Å] and two ether oxygens [CuO, 2.471(2) Å]. Two adducted [4-FPAH] acid molecules are linked to the un-coordinated oxygens of the acid ligands by hydrogen bonds [2.547(4) Å]. [Cu₂(4-FPA)₄(2-aminopyrimidine)₂] (2) is triclinic, space group P1 with Z = 1 in a cell of dimensions a = 12.688(2), b = 11.422(2), c = 7.951(1) Å, α = 78.74(1), β = 107.51(1), γ = 75.78(1)°, and was refined to a residual of 0.042 for 2683 ‘observed’ reflections. (2) is a centrosymmetric tetracarboxylate bridged dimer with four similar CuO (equatorial) distances [1.967–1.987 Å; 1.977(3) Å mean] and the axial position occupied by the hetero nitrogen of the 2-aminopyrimidine ligand [CuN, 2.176(3) Å]. The Cu---Cu separation is 2.710(1) Å. Crystal data are also presented which confirm the isostructurality of complex (2) with [Cu₂(phenoxyacetate)₄(2-aminopyrimidine)₂], the Co^II, Mg^II and Mn^II4-fluorophenoxyacetate complexes with their phenoxyacetic and 4-chlorophenoxyacetic acid analogues, and of Cd^II4-fluorophenoxyacetate with Cd^II and Zn^II phenoxyacetates.     

Two conformations of crystalline adenylate kinase.

Pig muscle adenylate kinase (EC2.7.4.3) can exist in three crystal forms, which are interconvertible. For crystal form A the enzyme structure is known in atomic detail. We report the X-ray diffraction analysis of crystal form B at 4.7 Å resolution and a comparison with the A form. During the transition from A to B the packing arrangement of the molecules changes slightly. Moreover, the individual molecule undergoes an appreciable conformational change: by displacing a chain segment of seven residues and two adjacent α-helices a hydrophobic pocket is opened deep in the cleft near the centre of the molecule. Concomitantly the β-pleated sheet is enlarged by about four hydrogen bonds in the B form. Several lines of evidence indicate that the observed conformational change is an intrinsic property of the molecule and is not induced by crystal packing forces.     

Preparation and crystal structure of bis(acetato)(trans-1,2-diaminocyclohexane)platinum(II)

The structure of the complex [Pt(trans-1,2-di- aminocyclohexane) (acetate)₂]·H₂O has been determined by X-ray diffraction. This racemic compound is orthorhombic, space group Aba2, a = 20.813(9), b = 7.926(5), c = 17.296(8) Å, Z = 8. The structure was refined on 1214 nonzero Cu Kα reflections to R = 0.028. The square planar environment of Pt includes the amino groups of the diamine in cis positions and oxygens from two monodentate acetates. The PtN and PtO distances average 2.00(3) and 2.02(3) Å, respectively. The bite of the diamine ligand imposes a NPtN angle of 85(1)°, whereas the small OPtO angle of 85(1)° probably results from packing effects. The average plane through the puckered cyclohexyl ring makes an angle of 19° with the PtN₂O₂ plane. The molecules are stacked by pairs along the b axis. The two molecules of each pair are 180° apart about the stacking axis, and form altogether four NH···O hydrogen bonds.     

f-Element/crown ether complexes. 16. Synthesis,crystallization and crystal structure of [Dy(OH2)8]Cl3·18-crown-6·4H2O

When crystals of [Dy(OH₂)₇(OHMe)] [DyCl(OH₂)₂(18- crown-6)]₂Cl₇·2H₂O [1] are allowed to warm from 5 °C to ambient temperature (22 °C) under the original solvent mixture (1:3 CH₃OH: CH₃CN), they redissolve and the title complex can be isolated by slow evaporation of the resulting solution. The crystal structure of this complex, [Dy(OH₂)₈]Cl₃·18-crown-₆·4H₂O, has been determined. It crystallizes in the monoclinic space group, P2₁/c, with a = 10.395(1), b = 18.684(1), c = 16.259- (3) Å, β= 102.56(1)°, and D_calc = 1.61 g cm⁻³ for Z = 4. A final conventional R value of 0.041 was obtained by least-squares refinement using 3453 independent observed [F_o⩾5σ(F_o)] reflections. The [Dy(OH₂)₈]³⁺ cations and crown ether molecules are hydrogen bonded in a polymeric chain with the crown molecules separating the cations and a total of seven DyOH₂···O(crown ether) hydrogen bonds. The chains are connected by a hydrogen bonding network consisting of the cations, chloride ions, and uncoordinated water molecules. The geometry of the cation is best described as a bicapped trigonal prism with distortions on the reaction pathway toward dodecahedral symmetry. The two capping atoms average 2.41(1) Å from Dy, the remaining DyO distances average 2.38(2) Å. The 18-crown-6 molecule has the D_3d conformation normally observed except for a distortion of one OCCO unit containing the oxygen atom accepting two hydrogen bonds.     

Comparative structural studies of the first row early transition metal(III) chloride tetrahydrofuran solvates

Two compounds of empirical formula MCl₃- (THF)₃, M = V and Cr, have been characterized by single crystal X-ray studies. The VCl₃(THF)₃ molecule, which has a mer octahedral stereochemistry, crystallizes in the monoclinic space group P2₁/c with a= 8.847(2),b= 12.861(5),c= 15.134(3) Å, β = 91.94(2)°, V = 1721(1) ų and Z = 4. The V-Ci(1) and V-CI(2) distances have a mean value of 2.330 [3] Å while V-CI(3) = 2.297(2) Å, The VO(1) and VO(2) distances have a mean value of 2.061[8] Å while V-O(3) = 2.102(3) Å cis ClVCl angles average 92.0[5]° and cis OVO angles average 86.2[2]° . The isostmctural complex, CrCl₃(THF)₃, has a crystal structure made up of discrete octahedral mer-CrCl₃(THF)₃ molecules with the following unit cell dimensions (space group P2₁/c): a = 8.715(1), b= 12.786(3), c = 15.122(3) Å, β = 92.15(1)°, V = 1684(1) ų and Z = 4. The CrCl(1) and CrCl(2) distances have a mean value of 2.310131 Å while CrCl(3) = 2.283(2) Å. The CrO(1) and CrO(2) distances have a mean value of 2.0101171 Å while CrO(3) = 2.077(4) Å. cis ClCrCl angles average 90.9[4]° and cis OCrO angles average 86.1 [2]°. The structures of these two octahedral complexes and those previously reported for ScCl₃(THF)₃ and TiCl₃(THF)₃ are compared and certain general trends are discussed.     

Preparation and structural characterization of di-μ-azido-bis[azido(2-aminopyridine)aquo]dicopper(II), [Cu(2-ampy)(N3)2(H2O)]2

Di-μ-azido-bis[azido(2-aminopyridine)aquo]dicopper(II), [Cu(2-ampy)(N₃)₂(H₂O)]₂, was synthesized and characterized by X-ray crystallography. The crystals are triclinic, space group P$\text{1}$, with a = 7.142(1), b = 7.812(1), c = 9.727(1) Å, a = 96.52(1), β = 95.52(1), γ = 113.47(1)°, and Z = 1. The structure was refined to R_F = 0.030 for 1960 observed MoKα diffractometer data. The dimeric molecule, which possesses a crystallographic inversion center, contains both terminal and μ(1)-bridging azido groups. Each copper(II) atom is further coordinated by a 2-aminopyridine ligand (via its ring N atom) and a water molecule to give a distorted square pyramid, with the metal atom raised by 0.17 Å above the N₄ basal plane [CuN (ring) = 2.001(2), CuN (azide) = 1.962(3)–2.018(2) Å] towards the apical aquo ligand [CuO = 2.371(2) Å]. Each water molecule forms an intramolecular O?HN (amine) acceptor hydrogen bond, and is linked by two OH?N (terminal azide) intermolecular donor hydrogen bonds to adjacent dimeric complexes to yield a layer structure parallel to (001). Infrared and electronic spectral data are presented and discussed.     

f-Element/crown ether complexes. 1. Synthesis and structure of [Y(OH2)8]Cl3·(15-crown-5)

The crystal and molecular structure of [Y(OH₂)₈]Cl₃·(15-crown-5) has been determined by single- crystal X-ray diffraction. The complex crystallizes in the monoclinic space group P2₁/n with Z = 4. Lattice parameters are a = 9.202(2), b = 17.247(3), c = 15.208(3) Å, and β = 92.39(2)°. The structure was solved by Patterson and Fourier techniques and refined by least-squares to a final conventional R value of 0.081. The Y(III) ion is eight coordinate, bonded to the oxygen atoms of the eight water molecules. Three of the water molecules are hydrogen bonded to crown ether molecules. The three chloride ions participate in hydrogen bonds with the remaining five water molecules. The YO(water) distances range from 2.322(6) to 2.432(7) Å and average 2.37(4) Å. The average O(water)···Cl and O(water)···O(crown) hydrogen bonded separations are 3.08(4) and 2.76(7) Å, respectively.     

Synthesis,characterization and crystal structure of 2-dimethylacetal-4-chloro-6-formylphenol and aquabis(2-dimethylacetal-4-chloro-6-formylphenolato)dioxouranium(VI)

The ligand 2-dimethylacetal-4-chloro-6-formylphenol, H(ALAC), prepared by boiling 2,6-diformyl-4-chlorophenol, H(DIAL), in methanol, was reacted with uranyl acetate to obtain the complex [UO₂(ALAC)₂(H₂O)]. The ligand and the uranyl complex were characterized by X-ray crystallography, infrared, ¹H NMR and electronic spectroscopy. Thermogravimetric and mass spectrometry data are also reported. In acid media H(ALAC) transforms easily into H(DIAL). H(ALAC) is monoclinic, P2₁/n, with a=13.951(5), b=7.902(5), c=9.465(5) Å, β= 91.33(3)°. The structure was refined to R=3.9%, based on 1657 observed reflexions. [UO₂(ALAC)₂(H₂O)] is tetragonal, P4₃2₁2, with a=11.147(5) and c=19.150(4) Å. The structure was refined to R=4.0%, based on 2938 observed reflexions. Four ligand oxygens and one water molecule are equatorially bonded to the uranyl group in this compound. Uranium and water oxygen lie in special positions on a crystallographic twofold axis so that the two halves of this molecule are symmetrically related. Selected bond distances for [UO₂(ALAC)₂(H₂O)] are: UO (charged) 2.28(2) Å, UO (neutral) 2.45(2) Å, UO (uranyl) 1.77(2) Å, UO (water) 2.44(4) Å.     

The crystal structure of 2-deoxy-β-d-arabino-hexopyranose at −150°

2-Deoxy-β-d-arabino-hexopyranose, C₆H₁₂O₅, is orthorhombic, P2₁2₁2₁, with cell dimensions at ?150° [20°], a = 6.484(2) [6.510(3)], b = 10.364(2) [10.427(4)], c = 11.134(3) [11.153(5)] Å, V = 748.2 [757.1] ų, Z = 4, D_x = 1.457 [1.440], and D_m = [1.455] g.cm^?3. The intensities of 1269 reflections were measured by using MoKα radiation. The structure was solved by direct methods, and refined by full-matrix least-squares, with anisotropic, thermal parameters for the carbon and oxygen atoms, and isotropic parameters for the hydrogen atoms. The pyranose has the ⁴C₁(d) conformation, with puckering parameters Q = 0.563 Å, θ = 3.9°, and ? = 350.3°. The departure from ideality is very small, and less than that in β-d-glucopyranose, Q = 0.584 Å and θ = 6.9°. The β-glycosidic, CO bond is short, 1.383(4) Å, and the OCOH torsion angle is ?87°, consistent with the anomeric effect. The hydrogen-bonding scheme consists of infinite chains, with side chains terminating at a ring-oxygen atom.     

Synthesis and structure of an oxidation product of hemiporphyrazinatoiron(II): Monoaquo-μ-oxo-bis(hemiporphyrazinato)iron(III). A linear μ-oxo dimer containing six- and five-coordinated iron atoms

The interaction between dioxygen and wer N-base solutions of Fe(II) hemiporphyrazine (Fehp) leads to the title compound, which is a high-spin antiferromagnetically coupled iron(III) complex. The crystal and molecular structure has been determined by X-rays. The unit cell is the tetragonal space group P4/ncc, with a=b=19.083(5) and c=23.509(5) Å. 2141 unique observed reflections were used in the analysis, and the final conventional R is 0.059. The structure consists of Fe(III)hp μ-oxo dimers having strictly linear FeOFe units and a nearly eclipsed internal configuration. This is the first observation of the formation of a mono-adduct in μ-oxo dimer via axial coordination of a H₂O molecule. The resulting asymmetric dimer, H₂OFeAhpOFeBhp contains a six-coordinated Fe atom (FeA) lying in the plane of the four Ns of the macrocycle. The second Fe atom (FeB) is five-coordinated and lies outside of the coordination plane by 0.45 Å. The FeO distances are: FeAO=1.782(7) Å and FeBO=1.739(7) Å. The axial coordination of the water (FeAO_w=2.210(9) Å) seems weak, probably due to the labilising trans influence of the μ-oxo ligand. The dimers are paired coaxially to form tetramers, which are in turn connected via a two- dimensional net of hydrogen bonds. The structural results are correlated with spectroscopic, thermogravimetric and magnetic properties.     

Structure of bovine pancreatic phospholipase A2 at 1.7 Å resolution

The crystal structure of bovine pancreatic phospholipase A2 has been refined to 1.7 Å resolution. The starting model for this refinement was the previously published structure at a resolution of 2.4 Å (Dijkstra et al., 1978). This model was adjusted to the multiple isomorphous replacement map with Diamond's real space refinement program (Diamond, 1971,1974) and subsequently refined using Agarwal's least-squares method (Agarwal, 1978). The final crystallographic R-factor is 17.1% and the estimated root-mean-square error in the positional parameters is 0.12 Å. The refined model allowed a detailed survey of the hydrogen-bonding pattern in the molecule. The essential calcium ion is located in the active site and is stabilized by one carboxyl group as well as by a peptide loop with many residues unvaried in all known phospholipase A2 sequences. Five of the oxygen ligands octahedrally surround the ion. The sixth octahedral position is shared between one of the carboxylate oxygens of Asp49 and a water molecule. The entrance to the active site is surrounded by residues involved in the binding of micelle substrates. The N-terminal region plays an important role here. Its α-NH₊³ group is buried and interacts with Gln4, the carbonyl oxygen of Asn71 and a fully enclosed water molecule, which provides a link between the N terminus and several active site residues. A total of 106 water molecules was located in the final structure, most of them in a two-layer shell around the protein molecule. The mobility in the structure was derived from the individual atomic temperature factors. Minimum mobility is found for the main chain atoms in the central part of the two long α-helices. The active site is rather rigid.     

Localization of repetitive and unique DNA sequences neighbouring the rabbit beta-globin gene

The structure of oxymyoglobin has been refined at 1·6 Å resolution, using diffractometer data collected at ?12 °C. The crystallographic R factor is 0·159, and the atomic positions are known to 0·1 Å accuracy in internal segments of the molecule.The iron atom lies 0·22(3) Å from the plane of the porphyrin, 0·25 Å closer than in deoxymyoglobin, and the F helix has moved by a similar amount. Oxygen binds to the iron in a bent, end-on arrangement, with FeOO = 115(5) ° and FeO = 1·83(6) Å. The mean FeN(porphyrin) bond length is 1·95(6) Å, 0·08 Å shorter than in deoxymyoglobin, but the difference is not significant compared to the experimental error. FeN_ε(His8F) is 2·07(6) Å, the same as in model compounds. Movements of the haem, iron, F helix and FG corner on oxygenation are similar to those found in the T-R state transition in haemoglobin, but are smaller in magnitude.     

Hyaluronic acid: The role of divalent cations in conformation and packing

X-ray diffraction data typical of helical structures have been obtained from strontium and calcium salts of hyaluronic acid. The data indicate three disaccharides in each helix repeat with an average pitch of 2.84 nm and therefore suggest a conformational similarity with other highly extended hyaluronate polymorphs, the packing of which in crystalline arrays is influenced both by the particular cation involved and by the extent of hydration.Intensity data from a high humidity calcium salt were used in a detailed structure refinement. Six chains were found to pack in a trigonal unit cell with symmetry P3₂12 and dimensions a = b = 2.093 nm, c = 2.830 nm. The polyanion conformation is stabilized by O(3)_AO(5)_B and O(4)_BO(5)_A hydrogen bonds across the (1 → 4) and (1 → 3) linkages, respectively. Both crystallographic and steric considerations imply a non-equivalence of the three disaccharide residues in each helix turn.Adjacent antiparallel chains are tied together through COO^?Ca²⁺^?OOC bridges while the co-ordination of each Ca²⁺ ion is completed by three pairs of dyadically related water molecules. These water molecules are also extensively hydrogen-bonded to the polyanions. Sensitivity of the a and b unit cell dimensions to the ambient relative humidity further supports the conclusion that water of hydration surrounds the polyanions.Consideration of isolation and purification procedures together with elemental analysis for a large number of hyaluronate samples demonstrates the importance of divalent cations, even in small quantities, in inducing extended 3-fold helical conformations. If interactions between chain segments have a role in determining the properties of hyaluronate-containing tissues and fluids then it is likely, because of the abundant calcium which is also present, that any polymer secondary structures usually will be similar to the conformer described in this study.     

Crystallographic studies of drug-nucleic acid interactions: Proflavine intercalation between the non-complementary base-pairs of cytidilyl-3′,5′-adenosine

In order to get insights into the binding of dyes and mutagens with denatured and single-stranded nucleic acids and the possible implications in frameshift mutagenesis, a 1:1 complex between the non-self-complementary dinucleoside monophosphate cytidilyl-3′,5′-adenosine (CpA) and proflavine was crystallized. The crystals belong to the tetragonal space group P4₂2₁2 with cell constants $\text{a = b = 19.38(1)}\text{A}\text{?}\text{and}\text{c = 27.10(1)}\text{A}\text{?}$. The asymmetric unit contains one CpA, one proflavine and nine water molecules by weight. The structure was determined using Patterson and direct methods and refined to an R-value of 11% using 2454 diffractometer intensities.The non-self-complementary dinucleoside monophosphate CpA forms a selfpaired parallel chain dimer with a proflavine molecule intercalated between the protonated cytosine-cytosine (C · C) pair and the neutral adenine-adenine (A · A) pair. The dimer complex exhibits a right-handed helical twist and an irregular girth. The neutral A · A pair is doubly hydrogen-bonded through the N(6) and N(7) sites (C(1′)C(1′) distance: 10.97(2) Å) and the protonated C · C pair is triply hydrogen-bonded with a proton shared between the N(3) sites (C(1′)C(1′) distance: 9.59(2) Å). To accommodate the intercalating dye, the sugars of successive nucleotide residues adopt the two fundamental conformations (5′ end: 3′-endo, 3′ end: 2′-endo), the backbone adopts torsion angle values that fluctuate within their preferred conformational domains: the PO bonds (ω, ω′) adopt the characteristic helical (gauche^?-gauche^?) conformation, the CO bonds (φ, φ′) are both in the trans domain and the C(4′)C(5′) bonds (ψ) are in the gauche⁺ region. The bases of both residues are disposed in the preferred anti domain with the glycosyl torsion angles (χ) correlated to the puckering mode of the sugar so that the cytidine residue is C(3′)-endo, low χ (12 dg), and the adenosine residue is C(2′)-endo, high χ (84 °). The intercalated proflavine stacks more extensively with the C · C pair than the A · A pair. Between 4₂-related CpA proflavine units there is a second proflavine which stacks well with both the A · A and the C · C pairs sandwiching it. Both proflavine molecules are positionally disordered. In each of its two disordered sites, the intercalated proflavine forms hydrogen-bonded interactions with only one sugar-phosphate backbone. A total of 26 water sites has been characterized of which only two are fully occupied. These hydration sites are involved in an intricate network of hydrogen bonds with both the dye and CpA and provide insights on the various modes of interactions between water molecules and between water molecules and nucleic acids.The structure of the proflavine-CpA complex shows that intercalation of planar drugs can occur between non-complementary base-pairs. This result can be relevant for understanding the strong binding of acridine dyes to denatured DNA, single-stranded RNA, and single-stranded polynucleotides. Also, the ability of proflayine to promote self-pairs of adenine and cytosine bases could provide a chemical basis for an alternative mechanism of frameshift mutagenesis.     

Synthesis and crystal structure of (pipzH2)2Mo2Cl8·4H2O (pipz = piperazine)

The title compound (pipzH₂)₂Mo₂Cl₈·4H₂O (pipz = piperazine),was isolated from the solution of (morphH)₂Mo₂Cl₆(H₂O)₂ in HCl 1:1 by addition of (pipzH₂)Cl₂. This reaction indicates the reversibility of the substitution of chloride ions in Mo₂Cl₈^4? by water molecules. (pipzH₂)₂Mo₂Cl₈·4H₂O crystallizes in the Pbca space group, with a = 15.154(2), b = 13.170(2), c = 12.208(2) Å and Z = 4. The structure was solved by the Patterson method and refined to the unweighted and weighted residuals of 0.050 and 0.048. The crystal structure is built form Mo₂Cl₈^4?, (pipzH₂)²⁺ and H₂O. The MoMo distance of 2.129(3) Å is the shortest one found in all structurally-characterised Mo₂X₈^4? (X = Cl, Br) anions. Four independent MoCl distances are 2.456(3), 2.445(3), 2.463(4) and 2.455(4) Å. The (pipzH₂²⁺ exists in a usual chair conformation. There is a network of hydrogen bonds of the type NH?Cl, NH?O, OH?Cl and OH?O between the ions and water molecules.     

The crystal and molecular structures of dioxo mo(VI) complexes of tripodal,tetradentate N,S-donor ligands

The crystal and molecular structures of the complexes MoO₂((SCH₂CH₂)₂NCH₂CH₂SCH₃), I and MoO₂((SCH₂CH₂)₂NCH₂CH₂N(CH₃)₂), II, have been determined from X-ray intensity data collected by counter methods. Compound I crystallizes in two forms, Ia and Ib. In form Ia the space group is P2₁/n with cell parameters a = 7.235(2), b = 7.717(2), c = 24.527(6) Å, β = 119.86(2)°, V = 1188(1) ų, Z = 4. In form Ib the space group is P2₁/c with cell parameters a = 14.945(5), b = 11.925(5), c = 14.878(4) Å, β = 114.51(2)°, V = 2413(3) ų, Z = 8. The molecules of I in Ia and Ib are very similar having an octahedral structure with cis oxo groups, trans thiolates (cis to both oxo groups) and N and thioether sulfur atoms trans to oxo groups. Average ditances are MoO = 1.70, MoS (thiolate) = 2.40, MoN = 2.40 and MoS (thioether) = 2.79 Å. Molecule II crystallizes in space group P2₁2₁2₁ with a = 7.188(1), b = 22.708(8), c = 7.746(2) Å, V = 1246(1) ų and Z = 4. The coordination about Mo is octahedral with cis oxo groups, trans thiolates and N atoms trans to oxo. Distances in the first coordination sphere are MoO = 1.705(2), 1.699(2), MoS = 2.420(1), 2.409(1) and MoN = 2.372(2), 2.510(2) Å. The conformational features of the complexes are discussed. Complex I displays MoO and MoS distances which are very similar to those found by EXAFS in sulfite oxidase. This similarity is discussed.