Enzyme research and applications in biotechnological intensification of biogas production

Biogas technology provides an alternative source of energy to fossil fuels in many parts of the world. Using local resources such as agricultural crop remains, municipal solid wastes, market wastes and animal waste, energy (biogas), and manure are derived by anaerobic digestion. The hydrolysis process, where the complex insoluble organic materials are hydrolysed by extracellular enzymes, is a rate-limiting step for anaerobic digestion of high-solid organic solid wastes. Biomass pretreatment and hydrolysis are areas in need of drastic improvement for economic production of biogas from complex organic matter such as lignocellulosic material and sewage sludge. Despite development of pretreatment techniques, sugar release from complex biomass still remains an expensive and slow step, perhaps the most critical in the overall process. This paper gives an updated review of the biotechnological advances to improve biogas production by microbial enzymatic hydrolysis of different complex organic matter for converting them into fermentable structures. A number of authors have reported significant improvement in biogas production when crude and commercial enzymes are used in the pretreatment of complex organic matter. There have been studies on the improvement of biogas production from lignocellulolytic materials, one of the largest and renewable sources of energy on earth, after pretreatment with cellulases and cellulase-producing microorganisms. Lipids (characterised as oil, grease, fat, and free long chain fatty acids, LCFA) are a major organic compound in wastewater generated from the food processing industries and have been considered very difficult to convert into biogas. Improved methane yield has been reported in the literature when these lipid-rich wastewaters are pretreated with lipases and lipase-producing microorganisms. The enzymatic treatment of mixed sludge by added enzymes prior to anaerobic digestion has been shown to result in improved degradation of the sludge and an increase in methane production. Strategies for enzyme dosing to enhance anaerobic digestion of the different complex organic rich materials have been investigated. This review also highlights the various challenges and opportunities that exist to improve enzymatic hydrolysis of complex organic matter for biogas production. The arguments in favor of enzymes to pretreat complex biomass are compelling. The high cost of commercial enzyme production, however, still limits application of enzymatic hydrolysis in full-scale biogas production plants, although production of low-cost enzymes and genetic engineering are addressing this issue.     

Developments in pre-treatment methods to improve anaerobic digestion of sewage sludge

During wastewater treatment, most organic matter is transferred to a solid phase commonly known as sludge or biosolids. The high cost of sludge management and the growing interest in alternative energy sources have prompted proposals for different strategies to optimize biogas production during anaerobic sludge treatment. Because of the high solid content and complex structure of sludge-derived organic matter, methane production during digestion is limited at the hydrolysis step. Therefore, large digester volume and long retention times of over 20 days are necessary to achieve adequate stabilization. Pre-treatments can be used to hydrolyze sludge and consequently improve biogas production, solids removal and sludge quality after digestion. This paper reviews the main pre-treatment processes, with emphasis on the most recent developments. An overview of the different technologies is presented, discussing their effects on sludge properties and anaerobic digestion. Future challenges and concerns related to pre-treatment assessment and implementation are also addressed.     

Autohydrolysis pretreatment of secondary sludge for anaerobic digestion

The increase in the number of wastewater treatment plants and the quality required for the residue produced makes it necessary to improve the efficiency of anaerobic digestion of sludge. Pretreatments of secondary sludge have shown important advantages in the elimination of volatile solids and pathogenic microorganisms from the sludge, and they have also had a positive effect on biogas production. However, such methods are associated with high operating costs. This paper shows the behavior of a autohydrolysis pretreatment, which consists of subjecting the secondary sludge to a temperature of 55 °C for 12–24 h with a limited amount of oxygen under batch operation. The pretreatment results in a high solubilization of organic matter, increasing the fluidity of the sludge and improving the biogas production. This study focuses on the evaluation of the influence of oxygen and the initial sludge concentration on the pretreatment behavior. The main results obtained showed that when autohydrolysis pretreatment was carried out for 12 h, with a high solid concentration and microaerobic conditions, the solubilization of organic matter was increased by 40%, the methane productivity was improved by 23%, and there was an overall improvement in sludge fluidity. Moreover, the energy assessment of the autohydrolysis pretreatment and anaerobic digestion system showed the energetic feasibility of this treatment method, since the increase in energy production compensates for the extra energy required to carry out the pretreatment.     

Production and characterization of β-glucosidase from Aspergillus niger fermentation: Application for organic fraction of municipal solid waste hydrolysis and methane enhancement

The anaerobic digestion of the organic fraction of municipal solid waste (OFMSW) is currently an attractive treatment process with energy production in the form of biogas. Hydrolysis is the rate-limiting step for the anaerobic digestion of solid wastes. Thus, in the present study fungal enzymatic pretreatment of OFMSW was applied to enhance biogas production. Two enzyme cocktails rich on β-glucosidase were produced from submerged fermentation of Aspergillus niger on basal medium using OFMSW as carbon source and urea (Urea cocktail) and Ulva rigida as nitrogen source (Ulva cocktail). Ulva cocktail displayed an important effect on OFMSW solubilization. Therefore, an increase of reducing sugar concentration about 60% was obtained which was in correlation with chemical oxygen demand (COD) increase. The performance of enzymatic pretreatment on anaerobic digestion of OFMSW was studied by conducting biochemical methane potential tests. Results showed that the enzymatic pretreatment improved methane yield of OFMSW even at high solid concentration. High methane yield about 500 ml/g total volatile solid was obtained, which corresponds up to 68% enhancement over the control.     

Peracetic acid oxidation as an alternative pre-treatment for the anaerobic digestion of waste activated sludge

Anaerobic digestion is generally considered to be an economic and environmentally friendly technology for treating waste activated sludge, but has some limitations, such as the time it takes for the sludge to be digested and also the ineffectiveness of degrading the solids. Various pre-treatment technologies have been suggested to overcome these limitations and to improve the biogas production rate by enhancing the hydrolysis of organic matter. This paper studies the use of peracetic acid for disintegrating sludge as a pre-treatment of anaerobic digestion. It has been proved that this treatment effectively leads to a solubilisation of organic material. A maximum increase in biogas production by 21% is achieved. High dosages of PAA lead to a decrease in biogas production. This is due to the inhibition of the anaerobic micro-organisms by the high VFA-concentrations. The evolution of the various VFAs during digestion is studied and the observed trends support this hypothesis.     

Effect of bioaugmentation of activated sludge with white-rot fungi on olive mill wastewater detoxification

AIMS: To test the potential use of Phanerochaete chrysosporium and other white-rot fungi to detoxify olive mill wastewaters (OMW) in the presence of a complex activated sludge. To combine the aerobic with anaerobic treatment to optimize the conversion of OMW in biogas. METHODS AND RESULTS: A 25-l air lift reactor was used to pretreat OMW by white-rot fungi. Detoxification of the OMW was monitored by size exclusion HPLC analysis, chemical oxygen demand (COD)/biological oxygen demand (BOD(5)) ratio evolution, and bioluminescence toxicity test. Anaerobic treatment of OMW was performed in a 12-l anaerobic filter reactor. Efficiency of the treatment was evaluated by organic matter removal, and biogas production. By comparison with the pretreatment by activated sludge only, the bioaugmentation with Phanerochaete chrysosporium or Trametes versicolor led to high removal of organic matter, decreased the COD/BOD(5) ratio and the toxicity. The subsequent anaerobic digestion of the OMW pretreated with activated sludge-white-rot fungi showed higher biomethanization yields than that pretreated with activated sludge only. Higher loading rates (7 g COD l(-1) day(-1)) were reached without any acidification or inhibition of biomethanization. CONCLUSIONS: The use of white-rot fungi, even in the presence of complex biological consortia to detoxify OMW, proved to be possible and made the anaerobic digestion of OMW for methane production feasible. SIGNIFICANCE AND IMPACT OF THE STUDY: The use of fungi for OMW reuse and energy production could be adapted to industrial applications.     

Impact of pretreatment on solid state anaerobic digestion of yard waste for biogas production

Solid state anaerobic digestion, as a safe and environment-friendly technology to dispose municipal solid wastes, can produce methane and reduce the volume of wastes. In order to raise the digestion efficiency, this study investigated the pretreatment of yard waste by thermal or chemical method to break down the complex lignocellulosic structure. The composition and structure of pretreated yard waste were analyzed and characterized. The results showed that the pretreatment decreased the content of cellulose and hemicelluloses in yard waste and in turn improved the hydrolysis and methanogenic processes. The thermal pretreatment sample (P1) had the highest methane yield, by increasing 88 % in comparison with digesting the raw material. The maximum biogas production reached 253 mL/g volatile solids (VS). The largest substrate mass reduction was obtained by the alkaline pretreatment (P5). The VS of the alkaline-treated sample decreased about 60 % in comparison with the raw material.     

Anaerobic digestion of the vegetable fraction of municipal refuses: mesophilic versus thermophilic conditions

The phenomena limiting the anaerobic digestion of vegetable refuses are studied through batch tests carried out using anaerobic sludge previously selected under either mesophilic (37v°C) or thermophilic (55v°C) conditions. The compositions of the hydrolysed cellulosic and hemicellulosic fractions of these materials are simulated by starch and hemicellulose hydrolysates, respectively. Non-hydrolysed mixtures of vegetable waste with sewage sludge are used to ascertain whether the hydrolysis of these polymeric materials is the limiting step of the digestion process or not. The experimental data of methane production are then worked out by a first-order equation derived from the Monod's model to estimate the kinetic rate constant and methane production yield for each material. Comparison of these results shows that passing from mesophilic to thermophilic conditions is responsible for a slight deceleration of methane production but remarkably enhances both methanation yield and methane content of biogas. The final part of the study deals with the fed-batch digestion of the same residues in static digester. Working under thermophilic conditions at a loading rate threshold of 6.0 g_COD/l · d, the hemicellulose hydrolysate ensures the highest methane productivity (60 mmol_CH4/l · d) and methane content of biogas (60%), while unbalance towards the acidogenic phase takes place under the same conditions for the starch hydrolysate. The intermediate behaviour of the non-hydrolysed mixture of vegetable waste with sewage sludge demonstrates that hemicellulose hydrolysis is the limiting step of digestion and suggests the occurrence of ligninic by products inhibition on methane productivity.     

Effect of microaerobic conditions on the degradation kinetics of cellulose

Limited oxygen supply to sludge digesters has shown to be an effective method to eliminate hydrogen sulfide from the biogas produced during anaerobic digestion but uneven results have been found in terms of the effect on the degradation of complex organic matter. In this study, the effect that the limited oxygen supply provoked on the “anaerobic” degradation of cellulose was evaluated in batch-tests. The microaerobic assays showed to reach a similar maximum production of methane than the anaerobic ones after 19 d and a similar hydrolytic activity (considering a first order rate constant); however, the microaerobic assays presented a shorter lag-phase time than the anaerobic test resulting in faster production of methane during the first steps of the degradation; specifically, the maximum methane production found in the anaerobic test in 19 d was found in the microaerobic test before the day 15.     

Enhancement of biochemical methane potential from excess sludge with low organic content by mild thermal pretreatment

Excess sludge with low organic content always led to the failure of anaerobic digestion for methane production. Recently, the mild thermal pretreatment, which is usually operated at temperatures below 120 °C, has drawn much attention due to less energy consumption and no chemical addition. In this study the effect of mild thermal pretreatment (50–120 °C) on the solubilization and methane potential of excess sludge with a low concentration of organic matters was investigated. Experimental results showed that the concentration of soluble organic matters increased gradually with temperature during the mild thermal pretreatment of excess sludge. Biochemical methane potential experiments demonstrated that the potential of methane production from excess sludge was greatly enhanced by mild thermal pretreatment, and under the conditions of pretreatment temperature 100 °C and digestion time 20 d the methane yield was as high as 142.6 ± 2.5 mL/g of volatile solids. Mechanism investigation on the enhancement of methane production from excess sludge exhibited that the consumptions of sludge protein and carbohydrate, the adenosine 5′-triphosphate content of anaerobic microorganisms, the activities of key enzymes related to anaerobic digestion, and the amount of methanogens were all improved by mild thermal pretreatment, in correspondence with the production of methane.     

Ultrasonic and Thermal Pretreatments on Anaerobic Digestion of Petrochemical Sludge: Dewaterability and Degradation of PAHs

Effects of different pretreatment methods on sludge dewaterability and polycyclic aromatic hydrocarbons (PAHs) degradation during petrochemical sludge anaerobic digestion were studied. Results showed that the total biogas production volume in the thermal pretreatment system was 4 and 5 times higher than that in the ultrasound pretreatment and in the control system, and the corresponding volatile solid removal efficiencies reached 28%, 15%, and 8%. Phenanthrene, paranaphthalene, fluoranthene, benzofluoranthene, and benzopyrene removal rates reached 43.3%, 55.5%, 30.6%, 42.9%, and 41.7%, respectively, in the thermal pretreatment system, which were much higher than those in the ultrasound pretreatment and in the control system. Moreover, capillary suction time (CST) of sludge increased after pretreatment, and then reduced after 20 days of anaerobic digestion, indicating that sludge dewaterability was greatly improved after anaerobic digestion. The decrease of protein and polysaccharide in the sludge could improve sludge dewaterability during petrochemical sludge anaerobic digestion. This study suggested that thermal pretreatment might be a promising enhancement method for petrochemical sludge solubilization, thus contributing to degradation of the PAHs, biogas production, and improvement of dewaterability during petrochemical sludge anaerobic digestion.     

Production of bioethanol, methane and heat from sugarcane bagasse in a biorefinery concept

The potential of biogas production from the residues of second generation bioethanol production was investigated taking into consideration two types of pretreatment: lime or alkaline hydrogen peroxide. Bagasse was pretreated, enzymatically hydrolyzed and the wastes from pretreatment and hydrolysis were used to produce biogas. Results have shown that if pretreatment is carried out at a bagasse concentration of 4% DM, the highest global methane production is obtained with the peroxide pretreatment: 72.1 L methane/kg bagasse. The recovery of lignin from the peroxide pretreatment liquor was also the highest, 112.7 ± 0.01 g/kg of bagasse. Evaluation of four different biofuel production scenarios has shown that 63-65% of the energy that would be produced by bagasse incineration can be recovered by combining ethanol production with the combustion of lignin and hydrolysis residues, along with the anaerobic digestion of pretreatment liquors, while only 32-33% of the energy is recovered by bioethanol production alone.     

Petroleum coke supplementation for enhanced biogas production and phosphate removal under mesophilic conditions

The use of carbon-based conductive materials has been shown to lead to an increase in biogas and methane yields during anaerobic digestion (AD). The effect of these additives on AD using synthetic substrates has been extensively studied, yet their significance for wastewater sludge digestion has not been adequately investigated. Therefore, the aim of this research was to optimize the concentration of petroleum coke (PC) that is a waste by-product of oil refineries, for the anaerobic digestion of wastewater sludge and investigation of phosphate removal in the AD process in the mesophilic temperature range. According to the results of the experiments, supplementing reactors with PC could significantly improve biogas and methane production. Supplementation of reactors with 1.5 g/L PC led to 23.40 ± 0.26% and 42.55 ± 3.97% increase in biogas production and methane generation, respectively. Moreover, the average volatile solids (VS), phosphate, and chemical oxygen demand (COD) removals were 43.43 ± 0.73, 46.74 ± 0.77%, and 60.40 ± 0.38%, respectively.     

The influence of the energy absorbed from microwave pretreatment on biogas production from secondary wastewater sludge

In this study, microwave treatment is analyzed as a way to accelerate the hydrolysis in anaerobic digestion of municipal wastewater sludge. The influence of the absorbed energy, power and athermal microwave effect on organic matter solubilization and biogas production has been studied. In addition, a novel method that considers the absorbed energy in the microwave system is proposed, in order to obtain comparable experimental results. The absorbed energy is calculated from an energy balance.The highest solubilization was achieved using 0.54 kJ/ml at 1000 W, where an increment of 7.1% was observed in methane production, compared to the untreated sample. Using a higher energy value (0.83 kJ/ml), methane production further increased (to 15.4%), but solubilization decreased. No power influence was found when 0.54 kJ/ml was applied at 1000, 600 and 440 W. Microwave heating was compared to conventional heating in two different experimental setups, providing similar methane yields in all cases.     

添加厨余垃圾对剩余污泥厌氧消化产沼气过程的影响

为提高剩余污泥厌氧消化的沼气产量和甲烷含量,研究了厨余垃圾的不同添加量对剩余污泥厌氧消化性能的影响。结果表明,在35℃下,随着剩余污泥中厨余垃圾添加量的增加,厌氧消化系统中碳氮质量比（C／N）、胞外多聚物（EPS）等生理生化指标均有不同程度的改善。其中当剩余污泥与厨余垃圾质量比为2：1时,混合有机废弃物中沼气产量和甲烷含量均达到最大值,每克挥发性固体（VS）产生了156．56mL沼气,甲烷体积分数为67．52％,分别比剩余污泥单独厌氧消化时的产气量提高了5倍和1．5倍。     

Fungal fermentation on anaerobic digestate for lipid-based biofuel production

Background

Anaerobic digestate is the effluent from anaerobic digestion of organic wastes. It contains a significant amount of nutrients and lignocellulosic materials, even though anaerobic digestion consumed a large portion of organic matters in the wastes. Utilizing the nutrients and lignocellulosic materials in the digestate is critical to significantly improve efficiency of anaerobic digestion technology and generate value-added chemical and fuel products from the organic wastes. Therefore, this study focused on developing an integrated process that uses biogas energy to power fungal fermentation and converts remaining carbon sources, nutrients, and water in the digestate into biofuel precursor-lipid.

Results

The process contains two unit operations of anaerobic digestion and digestate utilization. The digestate utilization includes alkali treatment of the mixture feed of solid and liquid digestates, enzymatic hydrolysis for mono-sugar release, overliming detoxification, and fungal fermentation for lipid accumulation. The experimental results conclude that 5 h and 30 °C were the preferred conditions for the overliming detoxification regarding lipid accumulation of the following fungal cultivation. The repeated-batch fungal fermentation enhanced lipid accumulation, which led to a final lipid concentration of 3.16 g/L on the digestate with 10% dry matter. The mass and energy balance analysis further indicates that the digestate had enough water for the process uses and the biogas energy was able to balance the needs of individual unit operations.

Conclusions

A fresh-water-free and energy-positive process of lipid production from anaerobic digestate was achieved by integrating anaerobic digestion and fungal fermentation. The integration addresses the issues that both biofuel industry and waste management encounter—high water and energy demand of biofuel precursor production and few digestate utilization approaches of organic waste treatment.

     

Thermophilic anaerobic digestion of source-sorted organic fraction of municipal solid waste

The influence of different organic fraction of municipal solid wastes during anaerobic thermophilic (55 degrees C) treatment of organic matter was studied in this work: food waste (FW), organic fraction of municipal solid waste (OFMSW) and shredded OFMSW (SH_OFMSW). All digester operated at dry conditions (20% total solids content) and were inoculated with 30% (in volume) of mesophilic digested sludge. Experimental results showed important different behaviours patterns in these wastes related with the organic matter biodegradation and biogas and methane production. The FW reactor showed the smallest waste biodegradation (32.4% VS removal) with high methane production (0.18 LCH4/gVS); in contrast the SH_OFMSW showed higher waste biodegradation (73.7% VS removal) with small methane production (0.05 LCH4/g VS). Finally, OFMSW showed the highest VS removal (79.5%) and the methane yield reached 0.08 LCH4/g VS. Therefore, the nature of organic substrate has an important influence on the biodegradation process and methane yield. Pre-treatment of waste is not necessary for OFMSW.     

Alternative methods for determining anaerobic biodegradability: A review

The characterization of solid wastes is a necessary step before they can be used in anaerobic digestion. The quantities of different compounds (carbohydrates, proteins, lipids and fibers) and anaerobic biodegradability (capacity to produce methane) are important information required to characterize waste. The Biochemical Methane Potential (BMP) test is one of the most relevant tests for assessing the biodegradability of waste materials. The BMP test is run under anaerobic conditions, using bacteria populations, which makes it very time consuming, i.e., about 30 days. This paper presents alternative methods for determining the anaerobic biodegradability of solid waste. First, we describe the already existing tests for characterizing organic matter. Then we correlate an aerobic test with an anaerobic test in order to estimate anaerobic biodegradability and biogas production. This shortens the analysis time to 5 days. Models using physico-chemical characteristics as input data (total carbohydrate, total nitrogen, fiber, etc.) can predict the amount of methane produced by correlation. Pyrolysis is a very fast analytical test that can be used to characterize solid waste. Lastly, spectroscopy techniques seem to be useful for determining biodegradability, in particular by taking into account the interaction between different molecules in the organic matter.     

The effect of various pre‐treatment methods of chromium leather shavings in continuous biogas production

During leather manufacture, high amounts of chromium shavings, wet by‐products of the leather industry, are produced worldwide. They are stable towards temperatures of up to 110°C and enzymatic degradation, preventing anaerobic digestion in a biogas plant. Hitherto, chromium shavings are not utilized industrially to produce biogas. In order to ease enzymatic degradation, necessary to produce biogas, a previous denaturation of the native structure has to be carried out. In our projects, chromium shavings were pre‐treated thermally and mechanically by extrusion and hydrothermal methods. In previous works, we intensively studied the use of these shavings to produce biogas in batch scale and significant improvement was reached when using pre‐treated shavings. In this work, a scale‐up of the process was performed in a continuous reactor using pre‐treated and untreated chromium shavings to examine the feasibility of the considered method. Measuring different parameters along the anaerobic digestion, namely organic matter, collagen content, and volatile fatty acids content, it was possible to show that a higher methane production can be reached and a higher loading rate can be used when feeding the reactor with pre‐treated shavings instead of untreated chromium shavings, which means a more economical and efficient process in an industrial scenario.     

Impact of milling,enzyme addition,and steam explosion on the solid waste biomethanation of an olive oil production plant

Anaerobic digestion is a consolidated bioprocess which can be further enhanced by incorporating an upstream pretreatment unit. The olive oil production produces a large amount of solid waste which needs to be properly managed and disposed. Three different pretreatment techniques were evaluated in regard to their impact on the anaerobic biodegradability: manual milling of olive pomace (OP), enzyme maceration, direct enzyme addition, and thermal hydrolysis of two-phase olive mill waste. The Gompertz equation was used to obtain parameters for comparison purposes. A substrate/inoculum ratio 0.5 was found to be the best to be used in anaerobic batch test with olive pomace as substrate. Mechanical pretreatment of OP by milling increases the methane production rate while keeping the maximum methane yield. The enzymatic pretreatment showed different results depending on the chosen pretreatment strategies. After the enzymatic maceration pretreatment, a methane production of 274 ml CH₄ g VS _added ^?1 was achieved, which represents an improvement of 32 and 71 % compared to the blank and control, respectively. The direct enzyme addition pretreatment showed no improvement in both the rate and the maximum methane production. Steam explosion showed no improvement on the anaerobic degradability of two-phase olive mill waste; however, thermal hydrolysis with no rapid depressurization enhanced notoriously both the maximum rate (50 %) and methane yield (70 %).